Issue 20/2023
Content (39 Articles)
Energy Absorption Characteristics of Fused Deposition Modeling 3D Printed Auxetic Re-entrant Structures: A Review
- Review
Niranjan Kumar Choudhry, Biranchi Panda, Uday Shanker Dixit
Effect of Triple Tempering Temperature on Microstructure, Mechanical, and Wear Properties of K340 Cold Work Tool Steel
- Technical Article
Saeed Farahany, Mehdi Ziaie, Nur Azmah Nordin
Wear and Corrosion of UNS S32750 Steel Subjected to Nitriding and Cathodic Cage Deposition
- Technical Article
Lauriene G. L. Silva, M. Naeem, Thércio H. C. Costa, Maxwell S. Libório, Rafael M. Bandeira, Natália S. Ferreira, Luciana S. Rossino, César A. A. Júnior, José C. A. Queiroz, João F. M. Neto, Rômulo R. M. Sousa
Microstructure, Corrosion Resistance, and Hardness of Simulated Heat-Affected Zone of Duplex UNS S32205 and Superduplex UNS S32750 Stainless Steels
- Technical Article
P. H. R. Pecly, B. B. Almeida, G. Perez, A. R. Pimenta, S. S. M. Tavares
Electroless Nickel-Plated Ferrochromium Flue Dust as Anode Material for Lithium-Ion Batteries
- Original Research Article
Humza Ashraf, Billur Deniz Karahan
Microstructure Characteristic and Impact Wear Behavior of Nb-Alloyed High Manganese Steels
- Technical Article
Yongqiang Guo, Yongjin Wang, Zetian Ma, Jingtao Han
Study on Stress and Plastic Deformation of Scaled Cylinder Head Specimens under Thermal Shock
- Technical Article
Guangyi Xie, Jilin Lei, Xiwen Deng, Wei Deng, Dewen Jia, Peng Song, Taihong Huang, Huabing Zhang
Deformation Behavior, Recrystallization Kinetics, Strengthening Mechanisms and Residual Stress in Al-Mg-Si-Ag Alloy Processed by Equal-Channel Angular Pressing
- Technical Article
Oussama Djema, Thomas Niendorf, Christopher Schott, Mabrouk Bouabdallah, Riad Badji, Ali Sari, Amr Saadi, Samira Sali, Philipp Krooß, Amane Sahli
Effect of Aging and Rolling on Microstructure and Mechanical Properties of AA7075/TaC Composites
- Technical Article
John Samson Khalkho, D. Benny Karunakar, Suresh Vidyasagar
Sliding Wear Resistance of Borided AISI 4140 Steel
- Technical Article
R. Márquez-Cortés, J. Martínez-Trinidad, M. Flores-Martínez, M. Flores-Jiménez, R. A. García-León
Optimizing 304 Stainless Steel Surface Performance with CoCrFeMoNi High-Entropy Alloy Coating via Gas Tungsten Arc Cladding
- Technical Article
Ning Liu, Zhou Lan, Linxi Liu, Jinjie Dou, Pingyi Guo, Xiaoli Wang
Microstructure Evolution and Mechanical Properties of a TiAl Alloy Modified by High-Entropy Alloy Additions
- Technical Article
Qiang Hu, Qiang Wang, Xinling Wu, Liangcai Zeng, Xinwang Liu
Wear and Corrosion Behavior of Zn-Ni-Cu and Zn-Ni-Cu-TiB2-Coated Mild Steel
- Technical Article
Sheikh Idrees Ali, Sheikh Nazir Ahmad
Corrosion of 1.4016 Ferritic Steel by Urea at High Temperature
- Open Access
- Technical Article
Anastasiia Galakhova, Fabian Kadisch, Gregor Mori, Susanne Heyder, Helmut Wieser, Bernhard Sartory, Jaroslaw Wosik, Sabine Schwarz, Simon Burger
Electrochemical Investigations on the Corrosion Behavior of 904L Stainless Steel in LiBr Solutions
- Open Access
- Technical Article
Sherief A. Al Kiey, E. A. Abd El Meguid, S. S. Abd El Rehim
Multifunctional Ti3AlC2-Based Composites via Fused Filament Fabrication and 3D Printing Technology
- Open Access
- Technical Article
Dongyan Liu, Lukas Hentschel, Guoming Lin, Christian Kukla, Stephan Schuschnigg, Na Ma, Christopher Wallis, Vahid Momeni, Michael Kitzmantel, Guoxin Sui
Corrosion Performance of Bioglass-Coated AZ31 Alloy under Static and Accelerated Flow Conditions
- Original Research Article
Y. Uzun
Investigations of the Wettability and Electrochemical Corrosion Behavior of Nb2O5 Thin Films on a Ti45Nb Alloy
- Original Research Article
Mevra Aslan Çakır
Uncertainties in the Swift Hardening Law Parameters and Their Influence on the Flow Stress and the Hole Expansion Behavior of Dual-Phase (DP600) Steel Specimens
- Technical Article
Kali Prasad, Deepak Kumar, Hariharan Krishnaswamy, Dilip K. Banerjee
An Improved Anisotropic Non-associated Plastic Potential Based on Barlat’s Yld 2000-2D Yield Stress Criterion
- Technical Article
José Divo Bressan, Mauricio Vicente Donadon
A New Approach to the Optimization of the Austenite Stability of Metastable Austenitic Stainless Steels
- Open Access
- Technical Article
Aaron Berger, Gero Egels, Robert Fussik, Santiago Manuel Benito, Sebastian Weber
An Analysis Framework of Additively Manufactured Deterministic Porous Structures for Transpiration Cooling
- Original Research Article
Kevin Zhang, Jean-Pierre Hickey, Mihaela Vlasea
Investigation of Microstructure and Several Quality Characteristics of AA7075/Al2O3/Coconut Shell Ash Hybrid Nano Composite Prepared through Ultrasonic Assisted Stir-Casting
- Technical Article
Ashish Kumar, R. C. Singh, Rajiv Chaudhary
Influence of Zr Content on Microstructure and Corrosion Behavior of As-Cast Zr-Modified Ti6Al7Nb Alloy for Biomedical Applications
- Technical Article
Bo Li, Pengfei Ji, Bohan Chen, Fei Wang, Wei Ma, Xinyu Zhang, Riping Liu
Integrity Assessment of 10Cr Ferritic Steel/Alloy 617M Dissimilar Metal Weld Joint under Creep Condition
- Technical Article
T. Sakthivel, H. C. Dey, P. K. Parida, G. V. Prasad Reddy, M. Vasudevan, Shaju K. Albert
Relationship between Grain Size and Sample Thickness on the Creep-Rupture Performance of Thin Metallic Sheets of INCONEL Alloy 740H
- Open Access
- Technical Article
John Shingledecker, Eeva Griscom, Alex Bridges
Rate and Load Effects on Scratch Behavior of Thermoplastics by Berkovich Indenter
- Technical Article
Ming Liu, Peng Xie
Influence of Extrusion Temperature on the Microstructure and Mechanical Properties of a 0.5 wt.% Graphene Nanoplatelet-Reinforced Aluminum Composite
- Technical Article
Shumei Lou, Baojia Cheng, Yongqiang Liu, Xin Li, Xuefeng Bai, Peng Chen, Yiming Li, Li Li
The Tensile Anisotropy of TC17 Disk Fabricated by Through-Transus Processing
- Technical Article
Wei Chen, Weidong Zeng, Bowen Jiang, Jianwei Xu
Effect of Pre-treatment and Duration of Pulse Plasma Nitriding on Duplex Plasma Treatment by Physical Vapor Deposition of TiN on AISI D2 Steel
- Technical Article
Kalyan Das, Alphonsa Joseph, Abhishek Ghosh, Gourab Saha, Ramkrishna Rane, Subroto Mukherjee, Manojit Ghosh
Improvement of Mechanical Properties of G115 Steel Welded Joint by Adjusting Welding Current
- Technical Article
Yankun Wang, Qingshuang Ma, Qiuzhi Gao, Hailian Zhang, Liming Yu, Huijun Li
On the Three-Dimensional Morphology of In Situ Grown TiB2 Particles in Molten Aluminum
- Technical Article
Chandan Singh, Jolanta Prywer, Devinder Yadav
Processing of Triangular Profile on Inconel-825 Superalloy by Wire Electrical Discharge Machining and Corner Error Optimization Using Teaching Learning-Based Optimization Technique
- Technical Article
Himanshu Bisaria, Arun Kumar Rouniyar
Study of the Effect of Ultrasonic Vibration on Nickel-Based Coating by Electrical Discharge Machining
- Technical Article
Wentao Hou, Weiwei Xu, Zhenyu Zhou, Cong Ding, Zhongyu Piao
Microstructure Evolution and Interfacial Bonding Properties of Dissimilar T-Lap Joints Using Friction Stir Welding Parameters
- Technical Article
Hao Dinh Duong, Tra Hung Tran, Xuan-Phuong Dang, Dac Dung Truong, Nam Hoai Quach
Effect of Processing Parameters on the Phase Transformation of a High Temperature Copper-Based Shape Memory Alloy
- Technical Article
S. Vegar Seyedmohammadi, Guney Guven Yapici
Comprehensive Analysis of the Effect of Ultrasonic Surface Rolling Process on the Friction and Wear Properties of TB8 Titanium Alloy
- Technical Article
Yu Liu, Hao Cui, Ying Liu, Xiaohui Zhao
Interface Bonding Mechanism of 2024/6061 Aluminum Alloy Bimetallic Casting Blank Subjected to Isothermal Compression
- Technical Article
Yangbo Wang, Fangcheng Qin, Huiping Qi, Hengxing Wang
A New Approach to Empirical Optimization of Laser Powder Bed Fusion Process for Ti6Al4V Parts
- Open Access
- Technical Article
Alireza Dareh Baghi, Shahrooz Nafisi, Reza Hashemi, Heike Ebendorff-Heidepriem, Reza Ghomashchi
