Issue 21/2024
Content (56 Articles)
Non-firing Synthesis for Oxides: From Natural to Synthetic Forms with Energy-Efficient and Sustainable Processes
- Review
Liping Zhao, Jinyun Xu, Yu Zhang, Ziqi Zhang, Ming Li, Hongze Li, Shijie Shang, Xiaoqing Wang, Xudong Hu, Xiaojun Zhang, Wenju Zhu, Chunming Zheng, Xiaohong Sun
Study on Sealing Performance and Solubility of High Plastic-Soluble Aluminum-Based Sealing Ring Materials for Soluble Bridge Plugs
- Original Research Article
Xiaohong Wang, Yangang Jiang, Yuanhua Lin, Tao Liu, Shuibo Wang, Peiyao Wang
Microstructure Evolution on the Surface of Fe-20Mn-6Al-0.6C-0.15Si Austenitic Low-Density Steel during Heat Treatment
- Original Research Article
Qi Zhang, Guanghui Chen, Yiping Shen, Zhengliang Xue, Guang Xu
Nanoprecipitate-Hardened 2.8 GPa Medium-Carbon Low-Alloy Martensitic Steel with Exceptional Ductility Produced via Rapid Heavy Warm Rolling
- Original Research Article
Xinbo Ji, Huakai Zhang, Mingjian Jian, Guangcheng Zhang, Duqing Zhang
Residual Stress Evolution of 7050 Aluminum Alloy during Thermal Processing and Its Effects on Processing Deformation and Mechanical Properties
- Original Research Article
Mingli Zhang, Kaixuan Gu, Zeju Weng, Chen Cui, Junjie Wang
Effect of Heating Temperature on Microstructures and Tribological Properties of Near βTi Alloy
- Original Research Article
Bo Song, Yisen Wang, Wenlong Xiao, Chaoli Ma, Lian Zhou, Yanbiao Ren, Ruipu Li, Hui Chen, Hongyang Wang, Tianwen Zhen, Jiamu Fu, Baoyu Shi
The Effect of Intermetallic Compounds on Corrosion and Tribocorrosion Behavior of 7075 Aluminum Alloy
- Original Research Article
Qing Yan, Hongwei Zhang, Cheng Man, Kun Pang, Xiaoying Wang, Zhongyu Cui, Hongzhi Cui
Influence of Vanadium Carbide as an Anti-wear Reinforcement in Zirconia-Toughened Alumina for High-Temperature Tribological Application
- Original Research Article
Moumita Sarkar, Shitanshu Shekhar Chakraborty, Nilrudra Mandal
High-Speed Impact Behavior of Extruded AlCrFeCoNip/AZ91D Composites at Various Deformation Temperatures
- Original Research Article
Xiaomei Sun, Yongsheng Chen
Effect of Incremental Addition of ZrO2 on the Densification, Phase Formation, Microstructure, and Strength Development of Pre-reacted Magnesium Aluminate Spinel
- Original Research Article
Biswajit Baruah, Naveen Kumar Yadav, Ritwik Sarkar
Corrosion of Copper with Nickel or Zinc Addition in a Typical Marine Atmospheric Environment
- Original Research Article
Xiaoqing Ni, Decheng Kong, Chaofang Dong
Electro-Spark Deposition Coating of AISI 4140 and AISI 1040 Steels by WC, Ni and M42 Electrodes and their Wear Properties
- Original Research Article
Yusuf Kayali, Yılmaz Yalçin, Şükrü Talaş
Microstructure and Mechanical Properties of a Novel Powder Metallurgy Nickel-Base Superalloy
- Original Research Article
Jinlong Yang, Jinyan Cui, Junyi Cheng, Lei Xiao, Jianzheng Guo
Experimental and Crystal Plasticity Finite Element Model Characterization of the Formability and Anisotropy of ShAPE Extruded AA7075 Tubes
- Original Research Article
Sobhan Nazari Tiji, Amir Asgharzadeh, Taejoon Park, Farhang Pourboghrat
Studies on Impedance and Dielectric Properties of Bi2/3Cu3Ti4−xSixO12 (x = 0.05 and 0.1) Ceramics Synthesized by the Semi-wet Method
- Original Research Article
Vishnu Shankar Rai, Dinesh Prajapati, Vinod Kumar, Harish Verma, Shail Upadhyay, Manish Kumar Verma, Anup Kumar, N. B. Singh, K. D. Mandal
Microstructural Characteristics of Al4C3 Phase and the Interfaces in Al/Graphene Nanoplatelet Composites and their Effect on the Mechanical Properties
- Original Research Article
Yana Mourdjeva, Daniela Karashanova, Diana Nihtianova, Rumyana Lazarova
Oxidation Performance of Inconel 718 Alloy Fabricated by Directed Energy Deposition
- Original Research Article
Abdulrahman AlGahtani, Sultan AlMutairi, Akeem Y. Adesina, Bandar AlMangour
Mechanical Properties of Fine-Grained Low Alloy Steel Investigated by Crystal Plasticity Finite Element Method
- Original Research Article
Xiaowei Feng, Zezhou Yang, Xiaoli Zhang, Yongfeng Shen
Effect of Welding Inclination Angle on Strain Distribution of X80 Pipeline Steel Welded Joint in Mountain Environment
- Original Research Article
Ruinan Lin, Bing Feng, Lisheng Liu, Cao Yu, Junjie Huang, Xiaohong Wang, Mei Yang
Influence of Electrodeposition Process Parameters and Si3N4 Nanoparticle Concentration on Microhardness and Wettability of Ni-Co-Si3N4 Nanocomposite Coatings
- Original Research Article
Yin Zhang, Liang Yao, Hengzheng Li, Yuanhua Lin
Comparative Analysis on Corrosion Behavior of Si-Based Weathering Steels in a Simulated Industrial Atmosphere
- Original Research Article
Raphael F. Assumpção, Victor C. Campideli, Vanessa F. C. Lins, Dalila C. Sicupira
Slurry Erosion Behavior of Ni-Al and Fe-Cr Coatings Deposited by Arc Wire Spray on Hydro Machinery SS316 Steel
- Original Research Article
Rajat Vipra, Vikrant Singh, Indraj Singh, Ankita Omer, Anuj Bansal, Jonny Singla, Anil Kumar Singla, Akash Tiwari, Deepak Kumar Goyal
Study on Galvanic Corrosion Behavior of AH36 Steel and TC4 Alloy Processed by Plasma Electrolytic Oxidation
- Original Research Article
Xin Li, Qiaoqin Guo, Huishan Jin, Mingxu Li, Zhong Yang, Yajian Wang
Effect of Microstructure on Oxidation and Micro-mechanical Behavior of Arc Consolidated Mo-Ti-Si-(B) Alloys
- Open Access
- Original Research Article
Bhaskar Paul, Shubham Kumar, J. Kishor, Sanjib Majumdar
Simulated Mechanical Properties of NbC-Fe Composite Material under Tensile Load
- Original Research Article
Zhao Nana, Ren Congcong, Xu Yunhua, Cui Zhen, Zhong Lisheng
Experimental Analysis and Artificial Neural Network Teaching–Learning-Based Optimization Modeling on Electrical Discharge Machining Characteristics of AZ91 Composites
- Original Research Article
Dhanunjay Kumar Ammisetti, S. S. Harish Kruthiventi
Bending, Material Flow, and Microstructural Analyses of Friction Stir Spot Welded AA/Steel Joints using a Consumable Sheet through Experiments and Finite Element Simulations
- Original Research Article
Sukanta Das, R. Ganesh Narayanan
Wear Behavior of a Novel Hybrid Aluminium Based Nanocomposite
- Original Research Article
Md. Imran Rizwi, Shubhadip Paul, Biplab Hazra, Durbadal Mandal, Bijay Kumar Show
Effect of Printing Parameters on Mechanical Properties and Dimensional Accuracy of 316L Stainless Steel Fabricated by Fused Filament Fabrication
- Original Research Article
Chenyu Wang, Wei Mai, Qile Shi, Ziqi Liu, Qingqing Pan, Jingguang Peng
Preparation and Properties of Sulfur/Activated Carbon/Carbon Nanotube Composite Cathode Materials for Lithium–Sulfur Batteries
- Original Research Article
Wanzheng Lu, Hui Xu, Jie Wu, Mingzhe Xue, Zhixiang Xing
Silver-Decorated Reduced Graphene Oxide–Sulfonated Polyaniline Ternary Nanocomposite: A Highly Reliable Anti-Corrosion Coating Material for Mild Steel
- Original Research Article
Saurav Ramesh Nayak, Kikkeri Narasimha Shetty Mohana, Kamalon Rajitha, Ambale Murthy Madhusudhana, Satishkumar R. Naik
Experimental Study on Evolution Law of Self-Magnetic Leakage Field during the Fatigue Process of Steel Weld
- Original Research Article
Zhenfeng He, Hong Zhang, Hu Ma, Yang Zou, Jianting Zhou, Bo Chen, Leng Liao
Ionic Copolymers Including Iodide and Dihydrogen Phosphate Anions for Increased Adsorption and Anticorrosion on Copper in Sulfuric Acid
- Original Research Article
Weiping Luo, Yueting Shi, Lingli Chen, Sijun Xu, Junle Xiong, Fang Gao, Hongru Li, Shengtao Zhang
A Cobalt-Free High-Entropy Alloy with Excellent Mechanical Properties at Ambient and Cryogenic Temperatures
- Original Research Article
Wei Liu, Dan Liu, Xuejiao Wang, Yucheng Wu, Junwei Qiao
Microbial Corrosion of X60 Pipeline Steel in Groundwater Containing Sulfate-Reducing Bacteria/Iron-Oxidizing Bacteria Mixed Colonies
- Original Research Article
Di Xiaojing, Pan Haodan, Yan Maocheng, Victor Malachy Udowo, Li Xiaoxu
Effect of Printing Parameters on the Surface Roughness and Dimensional Accuracy of Digital Light Processing Fabricated Parts
- Original Research Article
Ashish Kaushik, Ramesh Kumar Garg
Room Temperature Stamping of High-Strength Aluminum for Lightweight Structural Automotive Components
- Original Research Article
Wahaz Nasim, Shank S. Kulkarni, Ayoub Soulami, Mert Efe, Aashish Rohatgi
Multi-elemental Synergistic Optimization of Mg-Ge-In-Zn as a Promising Anode for Primary Mg-Air Batteries
- Original Research Article
Ming Yin, Yaqi Pang, Bingbing Yang, Minchi Wang, Yan Li
Influence of Artificial Pit on Corrosion Fatigue Behavior of 316LN SS and Its Weldment
- Open Access
- Original Research Article
A. Poonguzhali, S. Ningshen, G. Amarendra
Finite Element Analysis and Surface Performance Study of High-Speed Precision Bearing Ultrasonic Surface Rolling Processing
- Original Research Article
Xianmeng Xue, Shubo Xu, Yuefei Pan, Wei Zheng, Juanjuan Han, Jianing Li
Microstructure Evolution of Vacuum-Brazed Ti/Mo Joints with Ti- and Zr-Based Filler Metals
- Original Research Article
A. A. Ivannikov, N. S. Popov, A. V. Abramov, S. M. Terekhova, E. A. Chuvaeva
Microstructural and Mechanical Properties of Laser Cladding-Deposited AISI 1060 Steel with a Mixture of 410L Alloy and 4140 Alloy Powders
- Original Research Article
C. Roussos, S. Deligiannis, D. Ioannidou, G. Papapanos, P. E. Tsakiridis
Investigation of Surface Integrity of Ti-6Al-4V Using Graphite Nanopowder Mixed Electrical Discharge Machining
- Original Research Article
Saket Saurabh, Amit Kumar, Biplab Kumar Roy
Formation Mechanism of Transition Layer/Base Layer Weld Interface of S32304/Q390C Composite Material
- Original Research Article
Yulan Feng, Zhisheng Wu, Cuirong Liu, Luxia Zhang, Xin Wang
The Effect of Rolling Reduction on the Microstructure, Mechanical, and Damping Properties of Mg-1.0 wt.% Al Alloy
- Original Research Article
Huashen Liu, Youping Sun, Jiangmei He, Junming Li, Guojian Luo, Mengyu Pei
Structural Lightweight Design of Thermoplastic Polyurethane Elasticity Fabricated by Fused Deposition Modeling
- Original Research Article
Hao Zhang, Xinying Wang, Liang Yang, Lu Feng, David Hui, Yun Zhai
Reducing Mechanical Anisotropy in Dual-Phase Mg-9Li-1Zn Alloy by Control of Single-Pass Reduction during Asymmetric Rolling
- Original Research Article
Jinsheng Li, Hao Hu, Lingxiao Li, Junli Wang, Zhongxue Feng, Baoshuai Xue
Microstructure and Mechanical Properties of High-Strength Steel 22SiMn2TiB by Pulsed Melt Inert-Gas Welding with Activated Nitrogen Arc
- Original Research Article
Cong Li, Haobo Xue, Xiaoyong Zhang, Yong Peng, Kehong Wang
Augmented Laser Impact Welding: A New Process Demonstration in Welding Aluminum Alloy 2024-T3
- Original Research Article
Brian Thurston, Troy Lewis, Jianxiong Li, Anupam Vivek, Glenn Daehn
Effects of Nanosecond Laser Scanning Paths on Weld Formation, Microstructure and Mechanical Properties of Dissimilar Ultra-Thin Al/Cu Foil Nanosecond Laser Welded Joints
- Original Research Article
Xiao-Nan Wang, Jia-Le Wang, Qian Sun, Xiao-Xia Tang, Xiang Li, Kato Akira, Peng-Cheng Huan
Metallurgical and Mechanical Characteristics of AA2014-T6 Alloy Cladding over Mild-Steel IS2062 Substrate through Friction-Stir-Surfacing Process
- Original Research Article
A. Naresh, K. Veera Venkata Nagaraju, G. Venkatesh, B. Vijaya Kumar
Activated Tungsten Inert Gas Weld Characteristics of P91 Joint for Advanced Ultra Supercritical Power Plant Applications
- Original Research Article
Vishwa Bhanu, Dariusz Fydrych, Shailesh M. Pandey, Ankur Gupta, Chandan Pandey
On Novel 3D-Printed Diaphragmatic Hernia Solution for Bubalus bubalis
- Original Research Article
Rupinder Singh, Gurwinder Singh, Arun Anand
Research on Finite Element Simulation and Recrystallization of Laser Shock Peened Nickel-Based Single-Crystal Superalloy
- Original Research Article
Xia Dong, Zhanghan Tang, Gang Zhang, Kedian Wang
Parametric Analysis and Multi-objective Optimization for Machining Complex Features on D2 and DC53 Steels for Tooling Applications
- Original Research Article
Sana Hassan, Muhammad Asad, Muhammad Sana, Muhammad Umar Farooq, Saqib Anwar
