Issue 22/2024
Content (56 Articles)
- Original Research Article
Influence of Sulfur on the Splitting Fracture and Machining Performance of Microalloyed Medium-Carbon Steel 36MnVS4 Connecting Rods
Jiansheng Yan, Lie Chen, Chaolei Zhang, Hongsheng Miao, Shuize Wang, Guilin Wu, Junheng Gao, Honghui Wu, Haitao Zhao
- Original Research Article
Structural, Optical, and Dielectric Properties of Zirconium Titanate Ceramic Composite Synthesized by Solid-State Reaction
M. Naga Sravanthi, J. Sudagar
- Original Research Article
Microstructure and Mechanical Properties of 3D-Printed 316L Stainless Steel at Different Shot Peening Durations
Haijun Pan, Wenyu Tao, Bin Zhang, Peng Jiang, Zhizhi Wang, Wangping Wu, Lin Liu, Jing Li, Zhiqiang Wu, Zhihui Cai
- Original Research Article
Direct Writing of Reactive Inks Based on Electroless Nickel Deposition on Pure Aluminium Powders
Meghna Narayanan, Aarju Mathew Koshy, P. Swaminathan
- Original Research Article
An Insight into Microstructure and Mechanical Response of Mg-Li-Based Composites Prepared Using Glass Microballoons as Starting Reinforcement
Gururaj Parande, De Jin Eugene Chow, Akshay Padnuru Sripathy, Vyasaraj Manakari, Mrityunjay Doddamani, Manoj Gupta
- Original Research Article
Microstructure and Mechanical Properties of Friction Stir Welded LAZ931 Duplex Mg-Li Alloy Plates
Qi Zhang, Haitao Xie, Lele Huang, Liguo Wang, Yufeng Sun, Shaokang Guan
- Original Research Article
Investigation of the Effects of Spark Plasma Sintering Parameters on Equiatomic CoCrFeNiMo High Entropy Alloy
Aybuke Izci, Baris Yavas, Iulian Antoniac, Gultekin Goller
- Original Research Article
Interdependency between Electron Backscatter Diffraction-Based Misorientation Parameters and Coincidence Site Lattice Boundaries in 316LN Stainless steel
D. P. Rao Palaparti, V. D. Vijayanand, K. Mariappan, V. Ganesan, G. V. Prasad Reddy, A. Nagesha
- Original Research Article
Surface Morphology Investigations during Multi-walled Carbon Nanotubes and Nanographene Mixed Electrical Discharge Machining of Inconel 825
Pankaj Sharma, Vishal Singh, Manoj Kumar Sinha
- Original Research Article
Influence of Interlayer Temperature on Microstructure and Mechanical Properties of Additively Manufactured Inconel 625
Dongbo Guo, Tianqi Wang, Jinbao Tang, Mingli Wang, Liangyu Li
- Original Research Article
Influence of Thermogenetic Effect on Machinability of IN718 Alloy Made by Additive–Subtractive Integrated Manufacturing
Yanhua Zhao, Xiuping Han, Zhixu Xu, Yujing Sun, Wei Meng
- Original Research Article
Anisotropy of Hastelloy X Prepared by Selective Laser Melting After Hot Isostatic Pressuring and Heat Treatment
Zhanwei Yuan, Jie Bai, Fengchun Chang, Fuguo Li, Rui Ma, Junchao Zheng, Junyu Ren
- Original Research Article
Effects of Thermal Laser Shock Peening on Stress Corrosion Susceptibility of 304 Stainless Steel
Zhiming Lu, Shangkun Lin, Huan Liang, Chaobin Xu, Song Wei
- Original Research Article
Recycling Ti1.0Nb0.3Ta0.07Zr0.05 Conventional Alloys: Production of Non-equimolar TiZrCrNb0.3Ta0.07 Medium Entropy Alloys with the Addition of Cr for Improved In Vitro Corrosion Resistance
Omer Guler, Yakup Say, Burak Dikici, Iskender Ozkul, Mitsuo Niinomi
- Original Research Article
Effect of Heat Treatment on Microstructure, Mechanical and Corrosion Behavior of Ti-7Mo-8Nb Alloy for Biomedical Applications
Modar Saood, Khaled M. Ibrahim, Imad Al-Kashef, Madiha Shoeib, Mamdouh S. Mohamed
- Original Research Article
Interface Structure Change and Carbon Diffusion of Stainless Steel-Carbon Steel-Laminated Composite under High-Temperature Condition
Hao Li, Qingdong Zhang, Mingyang Yu
- Original Research Article
Effect of Induction Quenching and Tempering Temperature on the Mechanical Properties and Microstructure Evolution of 45 Steel for Linear Guide
Ying Sun, Lianfang He, Yuyang Gao, Shuo Fang, Zhichao Li, Huiping Li
- Original Research Article
Optimization of Induction Cladding Parameters Based on Parameter Sensitivity Analysis
Chengkai Li, Xianghua Zhan, Changfeng Fan, Xiaoli Yin, Jianghao Xie, Guidong Sun
- Original Research Article
Modeling the Precipitation Kinetics and Yield Strength of Mg-Gd-Y-Zr Alloys Based on An Improved Kampmann–Wagner Numerical Model and Modified Orowan Strengthening
Nan Zhang, Jiale Ma, Xiongling Zheng, Shaoxiang Li, Zhiqiang Han
- Original Research Article
Microstructure Evolution of 7005 Alloy Semisolid Billets Fabricated by Large Deformation-Induced Isothermal Spheroidization
Jufu Jiang, Shanyong Tang, Ying Zhang, Qiang Chen, Ying Wang, Hua Li
- Original Research Article
Thermoelectric Properties of Zr-Doped FeV0.64Hf0.16Ti0.2Sb Half-Heusler Alloys
Hany M. Abd El-Lateef, A. M. Adam, A. K. Diab, Mohamed Asran Hassan, E. M. Elsehly, V. Khovaylo, A. El-Khouly
- Original Research Article
Effect of Rolling Temperature and Annealing on Grain Refinement in TiNiCu Shape Memory Alloys
Shashi Mohan Rao Varukuti, K. N. Chaithanya Kumar, K. S. Suresh
- Original Research Article
Experimental Analysis and Surface Morphology of Holes Made by Electrical Discharge Machining on MoSi2-SiC Composite
L. Selvarajan, R. Rajavel, C. Arun, C. Raju
- Original Research Article
Comparative Study on the Microstructure, Wear Behavior, and Corrosion Performance of Iron-Based and Cobalt-Based Coatings Fabricated by Laser Cladding
F. Jin, S. Zhang, C. L. Wu, C. H. Zhang, X. Y. Sun, X. L. Bai
- Original Research Article
Microstructure and Mechanical Properties of CoCrFeNiSix (x = 0, 0.25, 0.5, 0.75) High-Entropy Alloys Based on Powder Plasma Arc Additive Manufacturing
Jinle Luo, Jiankun Wang, Chuanchu Su, Yanfei Geng, Xizhang Chen
- Original Research Article
Characterization of the Microstructure and Residual Stress in Quenched and Tempered AISI 4135 Steel Using Magnetic Nondestructive Testing Techniques
Jun-hui Chai, Jun-ping Zhong, Zheng-xiang Shen, Bo Xu, Zi-jian Zhang, Xiao-long Zhang, Jian-min Shen
- Original Research Article
Effect of NbC Addition on the Microstructure and Wear Resistance of Laser Cladding Nickel-Based Alloy Coatings
Yingpeng Liu, Kaiming Wang, Hanguang Fu, Xiaojun Yang, Jian Lin
- Original Research Article
Effect of Keyhole Gas Tungsten Arc Welding and Post-welding Heat Treatment on Microstructure and Hardness of Inconel 740H
K. S. Athira, S. Chatterjee
- Original Research Article
An Experimental Study on the Creep Behavior of Al 1050/Mg AZ31B Bilayer Sheet Fabricated via Roll Bonding
F. Raisie, M. Sedighi, A. Rouzbeh
- Original Research Article
Effect of Boron and Carbon on the Surface-Alloyed Layers with Fe(15−x)MoTiBxMn2C (x = 0,1,2,3)-Based Covered Electrodes
Hocaoğlu Recep, Kocaman Engin, Kılınç Bülent, Şen Şaduman, ŞEN Uğur
- Original Research Article
Effect of Sn Alloying on the Microstructural Features and Mechanical Properties of Gray Cast Iron
Himanshu Shekhar Mishra, Rina Sahu, D. S. Padan
- Original Research Article
Study on Microstructure and Tribological Behavior of Additively Manufactured Graphene/AlSi10Mg Composite
Sunil Patidar, Jitendar Kumar Tiwari, Abhradeep Das, N. Sathish, Srinibash Mishra, Mohammad Ashiq, Avanish Kumar Srivastava
- Original Research Article
Experimental Study on the Performance of Composite Gradient Reinforced Cladding Layer of Ductile Iron IN625/Co12
Chang Li, Mingyang Zhang, Menghui Yu, Xing Han
- Original Research Article
A Novel Hybrid Additive Manufacturing Methodology for the Development of Ti6Al4V Parts
Garvit Singh, Shailendra Kumar, Pawan Sharma
- Original Research Article
Strain-Induced Precipitation Behavior and Microstructure Evolution of Ti-V-Mo Complex Microalloyed Steel
Wensheng Liu, Hongyu Wei, Ke Zhang, Mingya Zhang, Jinghui Li, Shiyu Zhao, Peilin Zhao, Xiaoyu Ye, Zhaodong Li, Yuxi Ma
- Original Research Article
Facile Synthesis of Recyclable Silver-Decorated Magnetic Fe3O4@TA-Ag Composite: Mechanism and Catalytic and Antibacterial Activities
Changcheng Lin, Xiang Huang, Chenlong Shi, Yanting Yang
- Original Research Article
Quantitative Characterization of Strength Properties of Girth Welded Joints Based on Small Punch Test
Yuguang Cao, Chenyi Ren, Yizhen Zu, Ying Zhen
- Original Research Article
Lateral Evolution and Modeling of Garoua-Boulaï Soil Properties for Use in Earthen Constructions
Darman Japhet Taypondou, Jules Hermann Keyangue Tchouata, Yannick Tchedele Langollo, Albertine Alarba Sam-Tunsa, Michael Bodang Moudoh, Gilbert François Ngon Ngon
- Open Access
- Original Research Article
Influence of High Current Impulses on Element Distribution in Creep-Deformed Single-Crystal Ni-Based Superalloys
Silvia Reschka, Gregory Gerstein, Sebastian Herbst, Alexander Epishin, Hans Jürgen Maier
- Open Access
- Original Research Article
Tailoring Deformation Homogeneity of WE43 Alloy through Strain Rate Sensitivity and Back Pressure during Equal Channel Angular Pressing
Milad Daghigh, Maryam Mohri, Mahmoud Nili-ahmadabadi
- Original Research Article
Numerical Analyses of Underwater Friction Stir Welding Using Computational Fluid Dynamics for Dissimilar Aluminum Alloys
Nishant, S. K. Jha, P. Prakash
- Original Research Article
Metaheuristic Approach to Enhance Wear Characteristics of Novel AA7178/nSiC Metal Matrix Composites
Nikhil Bharat, Gugulothu Akhil, P. S. C. Bose
- Original Research Article
Physical Mechanism and Resistance Characteristics of Nacre-Like Composites for Two-Point Impact
Dongyang Gao, Pengcheng Chen, Yunchuan Zhao, Guoyun Lu, Huiwei Yang
- Original Research Article
Printing High-Strength High-Elongation Al4043 Alloy Using UNS A94043 Welding Wires through Wire Arc Additive Manufacturing
T. Ramkumar, D. Nathan, M. Selvakumar, V. Vigneshkumar, P. Narayanasamy
- Original Research Article
Study on Short-Term Corrosion of Stainless Steels 201 and 304 in Urban Atmosphere
Zelun Ouyang, Jun Wang, Hui Su, Xuankai Wang, Yi Xie, Tangqing Wu
- Original Research Article
Effects of Notch Position and Notch Length on the Fatigue Crack Growth Behavior of 6061-T6 Aluminum Alloy
Aditya Gope, Arushi Kumar, Prakash Chandra Gope, Sonika Chauhan
- Original Research Article
Direction, Shape, and Scale Dependence of Ice Adhesion on Topographical Wetting Gradients
Kirill Misiiuk, Richard Blaikie, Andrew Sommers, Sam Lowrey
- Original Research Article
Effect of Tensile Pre-strain on Mechanical Properties of Austenitic 301 Stainless Steel
JingSheng Xu, ManFu Wang
- Original Research Article
Comparing the Predictability of Soft Computing and Statistical Techniques for the Prediction of Tensile Strength of Additively Manufactured Carbon Fiber Polylactic Acid Parts
Abhishek Raj, Bobby Tyagi, Ashish Goyal, Ankit Sahai, Rahul Swarup Sharma
- Original Research Article
Preparation and Water Lubrication Behaviors of Al-Cu Alloy-Based Si3N4 Composites
Yanan Peng, Chenbo Ma, Qinqwen Dai, Wei Huang, Xiaolei Wang
- Original Research Article
Study on Microstructure and Interfacial Properties of n-Type Segmented Skutterudite/Half-Heusler Thermoelectric Material by Low-Temperature Bonding
Yefeng Bao, Chenyang Fan, Weian Wang, Yu Liu, Xiaoya Li
- Original Research Article
Effect of Synergistic Alloying of Co and Mo on Solidification Microstructure and Properties of NiAl-Based Eutectic High-Entropy Alloy
Jiaxing Feng, Xicong Ye, Haofeng Lei, Junchao Chen, Zhongheng Diao, Guangwei Zhao, Bo Li, Dong Fang
- Original Research Article
Constitutive Modeling and Microstructural Investigations for Evaluating Hot Deformation Behavior of Additively Manufactured Inconel 718 Superalloy
Marzieh Saremi, Hossein Arabi, Bagher Mohammad Sadeghi, Bahman Mirzakhani, Kian Yousefipour
- Original Research Article
Corrosion Behavior of 2A97 Al–Li Alloy in Cl− and SO42− Mixed Salt Spray
Yao Tan, Zi-xue Jiang, Jun-hang Chen, Zhi-hao Hu, Hao Zhang, Xin Zhang, Chao-fang Dong, Kui Xiao
- Original Research Article
Twinning Deformation and Yield Asymmetry Improvement of Magnesium Alloys by Free-End Torsion
Hongbing Chen, Zhikang Shen, Bo Song, Jia She
- Open Access
- Original Research Article
Effect of Laser Sintering Parameters on the Microstructure, Mechanical Properties and Corrosion Behavior of Titanium Grade 5 Alloy
Amit Kumar Singh Chauhan, Mukul Shukla, Abhishek Kumar
