Journal of Materials Engineering and Performance

Journal of Materials Engineering and Performance Editorial Committee Members Named Fellows of ASM International

• Announcement

Functionally Graded Materials Fabrication Using Wire Arc Additive Manufacturing: A Review of Recent Research Progress

• Review

Ehsan Gerashi, Xili Duan, Sima A. Alidokht

Modulation the Properties of Chitosan/Ce-V Conversion Film Composite Coating on Mg-8.5Li-6.5Zn-1.2Y by KMnO4 and pH

• Original Research Article

Chen Xu, Song Shen, Jia-xiu Wang, Rui-zhi Wu, Le-gan Hou, Jing-huai Zhang

Optimizing Mechanical Properties of Selective Laser Sintering-Printed Nylon-Glass Fiber Composites through Controlled Annealing Parameters

• Original Research Article

Abhinav Mukundan, Abraham Shine, V. M. Adhil, Geo G Vithayathil, Juby Joseph, Vipin Vijayan, V. V. Manikandan

Investigating the Surface Characteristics of Complex Geometrical Features on Ti-6Al-4V Alloy Processed through WEDM

• Open Access
• Original Research Article

Muhammad Umar Farooq, Muhammad Asad Ali, Saqib Anwar, Muhammad Usman, Zulfiqar Ali

Study on Surface Quality Formation Mechanism of Laser-Assisted Turning Si3N4 Ceramic

• Original Research Article

Minghai Wang, Yanan Li, Xianjun Kong, Xiaole Liu, Yinghu Sun

Enhanced Mechanical and Electrochemical Performance of Al/Mg Dissimilar Friction Stir Butt Welds Using AZ61 Magnesium Alloy

• Original Research Article

Usman Abdul Khaliq, Mohd Ridha Muhamad, Meor Faisal Zulkifli, Farazila Yusof, Suriani Ibrahim, Zbigniew Brytan, Takuya Miura, Tetsuo Suga, Yoshiaki Morisada, Hidetoshi Fujii

Influence of Weak Pulse Peak Current on Weld Formation during Aluminum Alloy Double-Wire Double-Pulsed Gas Metal Arc Welding

• Original Research Article

Kaiyuan Wu, Haoran Yang, Jing Lin, Taoyuan Tao, Xiaobin Hong

Impact of Deformation Force by Vibration-Centrifugal Hardening on the Properties of the Surface Nanostructure of Steel 40Kh

• Original Research Article

Yaroslav Kyryliv, Olha Maksymiv, Volodymyr Kyryliv, Bohdan Tsizh, Vasyl Vynar, Sergiy Yemelyanenko

Study on the Preparation of NiCoFeCrxAl High-Entropy Alloy and Its Mechanical Properties and Corrosion Behavior

• Original Research Article

Wang Xin, Liu Cong, Yu Zhaoxu, Kong Tiantian, Li Qingning, Bian Zhiruo

Improved Mechanical Properties of Reciprocating Friction Stir Welded LZ91 Mg-Li Alloy at Low Rotation Speed

• Original Research Article

Shiquan Cui, Weilong Liu, Zhipeng Liu, Li Ye, Wenbo Cao, Yufeng Sun, Shaokang Guan

Effect of Rotary Swaging on the Mechanical Properties of 90W-7Ni-3Fe High-Density Tungsten Alloy

• Original Research Article

Yang Yu, Mengna Chen, Haonan Wu, Jianlei Yang

Evaluation of Mechanical, Microstructural, and Tribological Characteristics of Cooling-Assisted Self-Reactive Friction Stir-Welded AA6061 Joints

• Original Research Article

Vishal Bhojak, Jinesh Kumar Jain, M. K. Banerjee, Tejendra Singh Singhal

Microstructural and Mechanical Characterization of Plasma-Sprayed Cu36Ni5In Coatings on Dual-Phase Ti8Mn Substrate

• Original Research Article

G. Mavropoulou, D. Ioannidou, A. Kaldellis, S. Deligiannis, V. Stergiou, P. Skarvelis, P. E. Tsakiridis

On Sensing Capabilities of Partially Absorbable 3D-Printed PLA Composite-Based Implant under Flexural Loading in Canine

• Original Research Article

Gurwinder Singh, Rupinder Singh, Amrinder Pal Singh, Minhaz Husain, Vinsay Kumar

Surface Integrity of AA6061-T6 Sheets Formed by Single Point Incremental Forming Process

• Original Research Article

Maninder Singh, Arshpreet Singh, Simranjit Singh Sidhu, Jagjeet Singh Chatha

Cracking Reduction and Texture Control in Laser Powder Bed Fusion Additive Manufactured Non-weldable Nickel Alloy

• Original Research Article

Wenhu Lin, Zhenbo Zhang

Microstructure and Mechanical Properties of Mg/Al Dissimilar Metal Diffusion Bonding Joints Using Zn-Bi Alloys as Interlayer

• Original Research Article

Tianbao Tan, Gang Chen, Baoshuan Liu, Hong Wang, Zijun Rong, Houhong Pan

Mutual Influence of Parameters Affecting the Quality of Oxygen-Free Copper Tubes Produced by Upcast Process

• Original Research Article

Diba Javidi, Ramin Raiszadeh, Arsalan Nazari, Hamid Payandeh, Mohammad Mehdi Khaleghian, Mohsen Saffari Pour

Experimental Investigation of CuO Nanofluid Minimum Quantity Lubrication Grinding Process

• Original Research Article

Rahul Chakule, Sharad Chaudhari, Kailas Chandratre, Poonam Talmale

Effect of Solution Heat Treatment on Corrosion Performance of Multi-pass Friction Stir Processed AA6061/Ceria-Stabilized Zirconia Composites for Marine Applications

• Original Research Article

Nisar Ahamad Khan, Dipayan Chakraborty, Ajay Kumar

Mitigation of Porosity and Surface Defects in Wire Arc Additive Manufactured Aluminium Alloy through Heat Input and Inert Gas Flow Control

• Original Research Article

Kumar Ujjwal, Chanchal Chauhan, R. K. Singh Raman, Alok Kumar Das

Development of Aluminizing Coatings on Additively Manufactured Inco 939 Alloy by High-Temperature Low-Activity Process

• Original Research Article

Ece Canan Karabastık, Cevat Sarıoğlu

Machinability of Mg-Al2O3 Nanocomposites: Effects of Volume Percentage and Cutting Inserts

• Original Research Article

K. S. Vijay Sekar, K. Gobivel, J. Shrinath, S. Rohit Kumar, P. Shreenivasan

Molten Salt Shielding Sintering of Porous Ti and Ti-Nb Alloys Fabricated from Metal Injection Molding Feedstocks

• Original Research Article

F. Signor, S. Noal Alves, D. D. Lima, W. L. Bevilaqua, P. H. Mareze, N. F. Daudt

Microstructural and Mechanical Implications of Tool Speed Variations in Dissimilar Friction Welding of Steel Tubes and Aluminum Plates Using FWTPET

• Original Research Article

K. T. Sabu, Amal V. Purushothaman, S. Muthukumaran, Sunilkumar Dhasan

Fabrication of a Superhydrophobic Nickel Surface with Superior Corrosion Resistance Using Electrodeposition from Choline Chloride-Ethylene Glycol Deep Eutectic Solvent

• Original Research Article

Hui Xu, Shaofu Li, Fan Jiang, Tongyu Song, Tiange Lou, Ziyi Xu

Investigation of Microstructure-Mechanical Property Relationship in Dissimilar Laser Welded P92 and AISI 316 Steels for Ultra-Supercritical Boiler Application

• Original Research Article

Maneesh Kumar Yadav, Shailesh M. Pandey

Effect of Casting-Forging Integrated Forming Technology on the Microstructure and Properties of a 6061 Aluminum Alloy Automobile Brake Caliper Housing

• Original Research Article

Xiaochun Sheng, Tianfeng Zhang, Keming Liu, Zhi Shen, Yong Peng, Hongli Xu, Haitao Zhou, Andrej Atrens

Study of Forming Accuracy and Surface Finish in Multi-Stage Robot-Assisted Incremental Sheet Hydroforming of AA6061

• Open Access
• Original Research Article

Ravi Prakash Singh, Santosh Kumar, Sudarshan Choudhary, Edward James Brambley, Pankaj Kumar Singh, Amrut Mulay

Effect of Heat Treatment on Microstructure and Mechanical Properties of GHS785L Alloy Steel Fabricated by Laser and Wire Additive Manufacturing

• Original Research Article

Chunhuan Guo, Dongsheng Guo, Fengchun Jiang, Xiangwei Xi, Peng Li

Recrystallization Mechanism of Refractory High-Entropy Alloy (Hf15Nb22Ti33Zr30)100−xAlx

• Original Research Article

Wei Zhang, Yuanyuan Zhang, Xinlong Zhang, Yanjun Wang, Shuzhi Zhang, Shouzhen Cao, Jianchao Han

Effect of Zr on Microstructure Evolution, Precipitation Behavior, and Mechanical Properties of Ti Microalloyed Low-Carbon High-Strength Steel during the Coiling Process

• Original Research Article

Hanyu Luo, Chao Lu, Xuegang Xiong, Chuangwei Wang, Jianchun Cao

Microstructure Evolution and High-Temperature Oxidation Mechanism of Press-Hardening Steel

• Original Research Article

Zixian Li, Chao Wang, Huibin Wu, Chengqian Sun, Youyou Zhang

Corrosion and Tribological Behaviors of Fe-28Al-5Cr Intermetallics in Molten FLiNaK Salt

• Original Research Article

Rongzhen Xiao, Siqi Zhang, Jun Cheng, Jie Guo, Juanjuan Chen, Hui Tan, Shengyu Zhu, Jun Yang

Phase Transformation Kinetics of Austenite in DIN 1.5025 Steel under Controlled Slow Cooling Conditions

• Original Research Article

Shima Pashangeh, Seyyed Sadegh Ghasemi Banadkouki, Mohammad Hadi Moradi Ardekani

Effect of Heat Treatment on the Microstructural Characteristics and Mechanical Properties of Steel-Aluminum Interpenetrating Dual-Phase Interface

• Original Research Article

Chengze Li, Yu Wang, Haotian Fan, Hong Xu, Heqian Song, Dan Zhang, Chenglong Bi, Wenpeng Shi

Effect of Zn Content on Homogenization Process and Mechanical Properties of 7075 Aluminum Alloy

• Original Research Article

Feng-feng Chen, Jia-wen He, Jun-lin Zhu, Bei-yue Deng, Hong-mei Yang

Hot Deformation Behavior, Microstructure Evolution and 3D Processing Map of a Novel Al-Mg-Zn Alloy with Sc and Zr Microalloying

• Original Research Article

Lei Xu, Bo Li, Han Yang, Long Xu, Xiuyu Yu

Effect of Heat and Cryogenic Treatments on Microstructure and Properties of 12% Tin Bronze

• Open Access
• Original Research Article

Peter Jurči, Jana Ptačinová, Zuzana Šándorová, Roman Moravčík, Matej Pašák

Effects of Laser Quenching on Ti-Cu Alloy Prepared via Wire-Powder Synchronous Arc Additive Manufacturing

• Original Research Article

Weimin Wu, Xizhang Chen, Tiehui Fang, Shasha He, Yanhu Wang

Preparation and Corrosion Behavior of Ni-Co-Si3N4-Al2O3 Nanocomposite Coatings Using Jet Electrodeposition with Varying Jet Voltages and Pulse Parameters

• Original Research Article

Yin Zhang, Haishun Deng, Liang Yao, Nyambura Samuel Mbugua, Hengzheng Li

Composition, Mechanical Properties, Shape Memory Effects, and Biocompatibility of NiTiW Alloys

• Original Research Article

Ekaterina S. Marchenko, Gulsharat A. Baigonakova, Kirill M. Dubovikov, Maxim D. Khomenko, Valentin I. Shtin, Denis E. Kulbakin, Alex A. Volinsky

Microstructure and Mechanical Property Characterization of Additively Manufactured Maraging Steel 18Ni(300) Built Part

• Original Research Article

Sudipta Swain, Saurav Datta, Tarapada Roy

Influence of Cr Segregation on Zn-Induced Embrittlement for Galvanized Advanced High-Strength Steel

• Original Research Article

Jiayi Zhou, Yu Sun, Rongxun Hu, Ming Lei, Hua Pan, Yulai Gao

Effect of Mn Content on Microstructure and Properties of 20Cr Lean Duplex Stainless Steel

• Original Research Article

Kai Chen, Mingkun Jiang, Weiwei Zhu, Guoqing Zu, Jingshi Zhang, Ying Han, Xu Ran

Exploring the Microstructural Features and Mechanical Performance of 21-4N Steel Fabricated via Vacuum Hot Pressing and Spark Plasma Sintering

• Original Research Article

R. Mariappan, J. Chandradass, T. Mohandas, S. B. Chandrasekhar

Microstructure and High-Temperature Performance of (TiB + La2O3)/Ti Matrix Composites Fabricated by Selective Laser Melting

• Original Research Article

Dingjin Zou, Liang Zhang, Chuhan Gao, Dong Zhu, Xinxin Liu, Wenheng Wu, Tao Wang, Xiaoqing Ni, Qiyun Yang, Shilei Li

Influence of the Ni/Al Ratio on the Microstructure and Mechanical Properties of NiAl-Based Eutectic High-Entropy Alloys

• Original Research Article

Dongdong Xia, JianKun Yang, Li Sun, GuoXin Wu, JiaJia Guo, Ding Li, Yiren Rong, Xicong Ye

Microstructures and Mechanical Properties of NbC-12Ni Cermets Strengthened by SiCw

• Original Research Article

Jianlong Yuan, Siwen Tang, Xinpeng Chong, Ji Lu, Hailang Liu

Iron-Aluminide-Alumina Coating on Reduced Activation Ferritic Martensitic Steel for Nuclear Fusion Reactor Applications

• Original Research Article

N. V. Vineeth, Kulwant Singh, Suntharavel Muthaiah, Athira K. V. Raj

Characterizations, Residual Stress and Corrosion Resistance of Nickel Coatings Printed by Meniscus-Confined Electrochemical Additive Manufacturing Process

• Original Research Article

Xin Li, Guang He, Wangping Wu, Yongcheng Geng, Meng Wu

Effect of Current Waveform Characteristics on the Double-Pulse Metal lnert Gas Welded Joint for 6082 Aluminum Alloy

• Original Research Article

Weihan Wang, Xiaopeng Gu, Jiaxu Shao, Xiaoyan Gu, Lijuan Zhu

Synthesis of (Ti,Me)(C,N)-Co-Ni Composite Powders Produced via Polycompound Co-reduction and Properties of Their Cermets

• Original Research Article

Xin Tao, Houan Zhang, Siyong Gu, Dongxu Qiao, Peng Xia, Yunhao Zhang, Wei Dang, Xiao Wen

Performance of Polycrystalline Boron Nitride Tools during Orbital Friction Stir Welding of Clad Pipes

• Original Research Article

F. D. Ramos, C. V. Amavisca, L. Bergmann, G. V. B. Lemos, A. Reguly, B. Klusemann

Effect of Multi-pass Warm Rolling and Annealing on Microstructure and Mechanical Properties of an Austenitic Steel

• Original Research Article

Sergey Akkuzin, Igor Litovchenko, Nadezhda Polekhina, Anna Kim, Kseniya Spiridonova, Evgeny Moskvichev

Microstructural Characterization and Mechanical Behavior of Sandwiched Alloy of Al7075 and AlSi10Mg Produced through Direct Metal Laser Sintering

• Original Research Article

S. Karthi, V. Senthilkumar, C. Velmurugan

Influence of Different Cooling Modes on the Microstructure and Wear Resistance of Iron-Based Ceramic WC Composite Coatings by High-Speed Laser Cladding

• Original Research Article

Y. H. Cui, S. Z. Tang, W. Chen, S. R. Guo, L. J. Yang, B. Zheng, Y. Y. Gao, Y. Zhao

Investigation on 3D-Printed Mesoporous Silica/Photocurable Resin-Based Nanocomposites: Mechanical, Morphological, and Thermal Properties

• Original Research Article

Sofiane Lasmi, Boussaha Bouchoul, Ángel Antonio Marcos-Fernández, Leila Lamiri, Mohamed Hamidouche, Fouzia Zoukrami, Hadjira Guerba

Multi-objective Optimization of the Surface Roughness of Ti-SiC Composites Using NSGA-II Based on TOPSIS and Box–Behnken Design

• Original Research Article

Jun Fang, Yong Chai Tan, Vin Cent Tai, Shamini Janasekaran, Dongsheng Wang, Youwen Yang, Yingmang Fan

Correction to: Multi-objective Optimization of the Surface Roughness of Ti-SiC Composites Using NSGA-II Based on TOPSIS and Box–Behnken Design

• Correction

Jun Fang, Yong Chai Tan, Vin Cent Tai, Shamini Janasekaran, Dongsheng Wang, Youwen Yang, Yingmang Fan

Effect of Normal Load on the Tribo-Corrosion Behavior of AZ31B Magnesium Alloy

• Original Research Article

Jianan Hu

Preparation, Microstructure, and Electrical Contact Performance of Ag/LaNixCo1-xO3 Electrical Contact Materials

• Original Research Article

Xiaohua Zheng, Chenhai Shen, Ji Zhang, Zhenwu Liu, Zijun Wang, Shuyan Yang

Cold Rolling of Friction Stir Welded Aluminum/Copper Joints: Microstructure Study, Mechanical Behavior, and Numerical Simulation

• Original Research Article

Reza Beygi, Farzad Badkoobeh, Ali Sonboli, Amir Ghiasvand, Mohammad Hossein Alirezaei, Ashkan Nouri, Eduardo A. S. Marques, Lucas F. M. da Silva

Unveiling the Role of Grain Boundary Engineering on Liquation Cracking Susceptibility in 304HCu Superaustenitic Stainless Steel

• Original Research Article

Vikram Kumar S. Jain, K. V. Phani Prabhakar, V. Subramanya Sarma

Impact of Defects on the Formability of Aluminum Alloys

• Original Research Article

Xiaoming Wang, Fengjie Yan, Jiesong Tu, Dan Jia, Guozheng Li, Zhengdong Yang

Study on the Influence of Electrochemical Charging Conditions on the Hydrogen Embrittlement Behavior of X65MS Pipeline Steel

• Original Research Article

Guo Yi, Yang Xu, Chuanbo Zheng, Han Ma, Dianchun Ju, Jiming Zhang, Xianjun Hu

Study of Influence of Heat Treatment on the Quenching Residual Stress, Hardness, Tensile Properties, and Microstructure of Mg-Gd-Y-Zr-Ag Alloy Conical Parts

• Original Research Article

Qiumin Xie, Yunxin Wu, Yuanzhi Wu

Friction-Induced Graphitization and Friction Wear Mechanism of Nongraphitic Carbon

• Original Research Article

Zonghe Yang, Hongxiang Yin, Xueping Liu, Yao Ma, Zhanjun Liu, Pengfei Lian

Interfacial Behavior of NiP Coatings on Fused Filament-Fabricated 17-4PH: Insights into Corrosion and Erosion

• Original Research Article

G. Prabu ram, K. Lingadurai

Investigation of Process Parameters of Inconel 625 Fabricated Parts by Wire Arc Additive Manufacturing

• Original Research Article

Suresh Gain, Dhinakaran Veeman, Murugan Vellaisamy

Impact of Heat Treatments on Residual Stress in Additively Manufactured AISI H13 Tool Steel

• Original Research Article

Fabio Faria Conde, Eduardo B. Fonseca, Suyanny A. Freire, Éder S. N. Lopes

Characterization and Mechanical Properties of As-Deposited Inconel-625 Tungsten Inert Gas Weld Cladding

• Original Research Article

Neeraj Kamboj, Rajiv Kumar, Harvinder Singh, Avtar Singh

Compatibility Study of Oxide Dispersion Strengthened Steel with Lead and Bismuth for Thermal Energy Storage Application in Non-toxic Thrusters

• Original Research Article

Sixiang Wang, Ronglu Zhang, Bi Wu, Shuai Yang, Deli Duan

Experimental and Numerical Investigation of Multi-pass Equal Channel Angular Rolling Effects on the Mechanical Properties of Aluminum Alloy

• Original Research Article

Shahin Azizi Abbasabad, Mohammad Zadshakoyan, Abuzar Es’haghi Oskui

Graphene-Reinforced Copper Composite Foils with Simultaneous Improvement of Hardness and Corrosion Resistance

• Original Research Article

Jinglong Jia, Changsong Liu, Yongqiang Fu, Xinming Li, Yuzhen Zhan, Zhiyong Zhang

Exploring Corrosion Pathways in Wire-Arc Direct Energy Deposited Grade 2 Titanium in Chloride-Enriched Systems

• Open Access
• Original Research Article

Tony Thomas, Blanca Palacios, Katrina Rodriguez, Sohail M. A. K. Mohammed, Sean Langan, Arvind Agarwal

On the Chemical Composition and Shear Strength of Electron Beam Welded Cu-ETP and AISI304 Dissimilar Metals Using a Statistical Approach

• Open Access
• Original Research Article

Marián Pavlík, Miroslav Sahul, Martin Sahul, Janette Kotianová, Maroš Martinkovič, Barbora Ludrovcová, Pavel Kovačócy

Molecular Dynamics Simulated In Situ Electron Backscatter Diffraction for Investigating Deformation Mechanisms in Polycrystalline Magnesium

• Original Research Article

Bin-Jiang Lv, Jun-Jiang Lv

Mesoscopic Modeling and Simulation of Microscopic Residual Stress for 8Cr4Mo4V Steel Bearing Ring After Heat Treatment

• Original Research Article

Tao Xia, Ziqian Chen, Tianpeng Song, Puchang Cui, Yong Liu, Jingchuan Zhu

Study on the Microstructural Evolution Mechanisms of TC4 Titanium Alloy during Hot Rolling Based on DEFORM-3D Simulation

• Original Research Article

Xuezhao Wang, Ping Zhang, Tengfei Zhang, Shuai Ge

Finite Element Simulation of Dynamic Crack Growth of Plasma-Sprayed Thermal Barrier Coatings under Thermal Cycling Condition

• Original Research Article

Q. Y. Shang, J. H. Zu, D. Liu, Y. Gao, W. F. Luo, M. Liu, H. D. Wang, Y. Bai, Y. Wang

Formability of AA5052-O Aluminum Alloy Sheet during Non-eddy Electromagnetic Forming

• Original Research Article

Wei Liu, Jianghong Bai, Min Zhang, Shangyu Huang

SOLID-MAP: Development of a Materials Acceleration Platform for High-Entropy Alloys

• Open Access
• Original Research Article

Atte Antikainen, Tuomas Jokiaho, Kimmo Kaunisto, Aloshious Lambai, Anssi Laukkanen, Tomi Lindroos, Lassi Linnala, Marko Mäkipää, Supriya Nandy, Janne Pakarinen, Tatu Pinomaa, Mikko Tahkola, Akhtar Zeb

Experimental and Numerical Analysis of Springback of AA1050-Fly Ash Green Composite Produced by Stir Casting Technique

• Original Research Article

Pankaj Kumar Sharma, Vijay Gautam, Subhajit Konar, Vinita Bhardwaj, Amit Kumar Sharma, Shashi Prakash Dwivedi

A Comprehensive Study on Fatigue Strength Prediction of a Broad Range of Steels Using Machine Learning

• Original Research Article

Mohammed Shahbaz Quraishy, Tarun Kumar Kundu

MPFEM Simulation of W-Cu Composites with Different W Particle Size Ratios under Thermal Shock

• Original Research Article

Yufeng Fu, Xizhong An, Junnan Li, Peng Han, Kun Liu, Jianchun Shi, Yongwen Fan

Corrosion Resistance Analysis of AlCrCuFe2NiTix High-Entropy Alloy Deposited Metal in NO32− Root Molten Salt

• Original Research Article

Guiqing Zhang, Cunzhen Xing, Jihou Qiang, Xiaoqi Kang, Yunhai Su

Microstructural Tailoring for Enhanced Wear Resistance and Improved Mechanical Properties in High-Carbon Rail Steel

• Original Research Article

Arun Rajput, Gulshan Verma, A. P. Harsha, J. Ramkumar, K. Mondal, K. Vishwanath

Current–Carrying Wear Characteristics of Al-Cu Alloys with Different Al-5Ti-B Additions

• Original Research Article

Yongxin Zhang, Junwen Zhao, Xingyu Tao, Lei Xu, Jing Han

Study on Oxidation Resistance and Corrosion Resistance of Laser Cladding WC-Fe-Based Coating on Steel Rolling Conveyor Roller

• Original Research Article

Chuncheng Yan, Ziqiang Yin, Youhong Cao, Dianxiu Xia

Effect of Cu Content on Microstructure and Properties of 7xxx Series Alloy

• Original Research Article

Haitao Zhang, Zheng Wang, Donghui Yang, Zibin Wu, Hiromi Nagaumi, Ke Qin, Cheng Guo, Chengbin Yu, Ziping Li

Effect of Temperature on Stress Corrosion Cracking of AerMet 100 Ultra-High-Strength Steel in Simulated Marine Environments

• Original Research Article

Jiajun Fan, Lijin Dong, Shuang Li, Hongli Wang, Huaibei Zheng, Tingyao Liu, Li Liu, Qinying Wang

Effects of Shewanella algae on Corrosion Behavior of 316L Stainless Steel

• Original Research Article

Zixuan Shao, Jianhua Tang, Zhizhong Dong, Xin Zhang

Cavitation Erosion Behavior of C-Alloyed Fe-25Cr-5Ni Duplex Steels

• Original Research Article

Emanuelle Machado Amaral, Jonathan Lentz, Sebastian Weber, Katia Cristiane Gandolpho Candioto, Angelo Fernando Padilha

Mechanical and Metallurgical Properties of SS304L–IN718 Bimetallic Wall Deposited using Cold Metal Transfer

• Original Research Article

D. Vinoth Kumar, A. Karpagaraj, T. G. Loganathan

Study on the Microstructure and Properties of CMT-Wire Arc Additive Austenitic Stainless Steel under Different Liquid Nitrogen Rapid Cooling Conditions

• Original Research Article

Chunjiang Zhu, Deyang Zhang, Xuetian Ding, Yong Zhao, Feiyun Wang, Juan Fu

The Effect of Zirconia Toughened Alumina (ZTA) Content on the Three-Body Abrasive Wear Behaviors of ZTA Reinforced Iron Matrix Composites

• Original Research Article

Xia Yang, Mojin Zhou, Yudong Sui, Pengfei Li, Yehua Jiang

Effect of Initial Orientation and Modified Layer on the Corrosion Behavior of ZK60 Magnesium Alloy in Simulated Body Fluid

• Original Research Article

Ying Xiong, Wei Liao, Zimu Wang, Tongjin Sun

Synergistic Inhibition Effect of Quinoline Quaternary Ammonium Salt and Sb2O3 as Corrosion Inhibitor for High Temperature Acidization

• Original Research Article

Yuan Lu

Evaluating the Mechanical Properties and Process Capability Analysis of Acrylonitrile Butadiene Styrene Components Produced by Fused Deposition Modeling Technology

• Original Research Article

Ibrahim Sabry, Abdel-Hamid Ismail Mourad, Majid Naseri, Ahmed Mohamed Mahmoud Ibrahim, Sanan H. Khan, Mohamed ElWakil

Mechanical Properties and Microstructure Characterization of Stainless Steel 316l and Maraging Steel 1.2709 Bimetallic Structures Fabricated by Laser Powder Bed Fusion

• Original Research Article

S. Ravi, V. Satheeshkumar, M. Kumaran

Mechanical and Corrosion Resistance Properties of the Inconel 718 Alloy Laser Welded to the Surface of 17CrNiMo6

• Original Research Article

Daqi Li, Bingtao Hu, Bailibing Jiang, Yujie Song

Utilizing Thermodynamic Phase Diagram Calculations to Study the Effects of Different Ni:Co Ratios on Ultra-Coarse-Grained WC-8(Co,Ni) Cemented Carbides

• Original Research Article

Xiaoyu Gu, Zhiping Sun, Zhiming Wang, Shan Gao

Effect of Processing Route and Antimony Content on the Thermoelectric Properties of Nb2FeCoSnSb Double Half-Heusler Alloy

• Original Research Article

Soumya Ranjan Mishra, Umasankar Rout, Vikrant Trivedi, Manjusha Battabyal, Karl Peter Davidson, D. Aravindha Babu, M. Navaneethan, Ramesh Chandra Mallik, R. V. Ramanujan, B. S. Murty

Optimizing Friction Stir Processing for Al-Fe Composites: Enhancing Mechanical Properties through Statistical Analysis

• Original Research Article

Varun Singhal, Vivek Kumar Jain, Vivek Kumar, Abhishek Saxena, Kunal Arora, Ashish Goyal

Experimental Analysis and Modeling of the Mechanical Behavior of an A9M Steel during Rolling

• Original Research Article

Amina Grairia, Walid Ghennai, Billel Smili, Afef Azzi, Alima Mebrek, Mounir Sakmeche, El Fahem Sakher, Mohammed Zaaf, Mosbah Zidani

Damping Performance of Open-Cell Zn Alloy Foams Prepared by Vacuum Infiltration Casting

• Original Research Article

Guoliang Lv, Yongliang Mu

Effect of the Rolling Process and Intercritical Annealing Temperature on the Mechanical Behavior of 0.06C-9Mn Steel

• Original Research Article

Chengcheng Yu, Qiannan Zhen, Chengsi Zheng, Yuehua Sun, Mingya Zhang, Shilei Li

Pyrolysis Characteristics and Reaction Mechanism of Thin Intumescent Fire-Retardant Coating for Steel Structures by Thermogravimetry/Fourier Transform Infrared Spectrometry

• Original Research Article

Jiaqing Zhang, Yubiao Huang, Lingxin He, Yuan Wu, Fengju Shang, Yanming Ding

A Phenomenological Study of the Influence of Temperature and Strain Rate on the Fracture Behavior of Double-Sided Laser-Welded Al-Mg-Si Alloy Butt Joint

• Original Research Article

Pedram Farhadipour, Narges Omidi, Noureddine Barka, Asim Iltaf, Mohamad Idriss, François Nadeau, Abderrazak El Ouafi

Preparation, Mechanical Properties, and Wear Resistance of Non-Asbestos Organic Brake Pads with Waste Shell Powder

• Original Research Article

Lixin Yang, Nengbin Hua, Zhenlong Liao

Effect of Elastomer Filling on the Tensile, Compressive, and Flexural Strength of Cross-Lattice Structured Acrylonitrile Styrene Acrylate Specimens Fabricated via Fused Filament Fabrication

• Original Research Article

Kubilay Han, Muhammed Asım Kesercioğlu, Yasin Akın, Yusuf Çay, Burak Tanyeri

Oxidation Performance of ZrO2 Sol–Gel Coatings on P91 Steel in a High-Temperature Vapor Atmosphere

• Open Access
• Original Research Article

C. A. Picón, I. J. Gutiérrez, C. Nieves, C. A. Hernández-Barrios, F. Viejo, A. E. Coy

Effect of Ultrasonic Impact Treatment on the Residual Stress and Mechanical Properties of Naval Grade High-Strength Low-Alloy Steel Welded Joints

• Original Research Article

I. R. Sugumaran, G. B. Bhaskar, G. K. Janani, S. R. Koteswara Rao

Investigation on Fracture Behavior of Modified 9Cr-1Mo Steel Base and Welded Joint in As-Weld and Post-Weld Heat-Treated Condition

• Open Access
• Original Research Article

Brajesh Kumar Singh, S. A. Krishnan, B. Shashank Dutt, R. Nikhil, A. Moitra

Immersion Corrosion Resistance of Binary High-Strength Cu-Mg Alloys

• Open Access
• Original Research Article

Paweł Strzępek, Małgorzata Zasadzińska, Piotr Noga, Monika Walkowicz, Piotr Osuch

Deep Learning Approach for Damage Detection on Composite Structures

• Open Access
• Original Research Article

S. Merola, M. Guida, F. Marulo

A Study of the Effect of Aging on Uniaxial Tensile Deformation and Fracture Resistance of SS 316 LN Welds

• Open Access
• Original Research Article

B. Shashank Dutt, M. Nani Babu, G. Shanthi, P. K. Parida, A. Moitra