Issue 5/2004
Content (19 Articles)
Testing of general and localized corrosion of magnesium alloys: A critical review
Edward Ghali, Wolfgang Dietzel, Karl-Ulrich Kainer
Dry and clean age hardening of aluminum alloys by high-pressure gas quenching
A. Irretier, O. Kessler, F. Hoffmann, P. Mayr
Tensile properties of copper alloyed austempered ductile iron: Effect of austempering parameters
U. Batra, S. Ray, S. R. Prabhakar
Built-up edge effect on tool wear when turning steels at low cutting speed
Zulay Cassier, Yidney Prato, Patricia Muñoz-Escalona
Numerical analysis of shear deformation localization using a double-variable damage model
T. C. Lee, C. Y. Tang, L. C. Chan
Low friction stainless steel coatings graphite doped elaborated by air plasma sprayed
A. Harir, H. Ageorges, A. Grimaud, P. Fauchais, F. Platon
Fatigue life improvements of the AISI 304 stainless steel ground surfaces by wire brushing
Nabil Ben Fredj, Mohamed Ben Nasr, Amir Ben Rhouma, Habib Sidhom, Chedly Braham
Role of environmental variables on the stress corrosion cracking of sensitized AISI type 304 stainless steel (SS304) in thiosulfate solutions
S. Roychowdhury, S. K. Ghosal, P. K. De
Correlation between free-volume parameters and physical properties of polyethylene-nitrile rubber blend
E. Gomaa, N. Mostafa, M. Mohsen, M. Mohammed
Mechanical properties of borosilicate glass coated with pure aluminum by sputtering
Toshihiko Hoshide, Maki Akamatsu
Relationship between ultrasonic characteristics and mechanical properties of tempered martensitic stainless steel
Cheng-Hsun Hsu, Hwei-Yuan Teng, Yeong-Jern Chen
Critical level of intergranular fracture to affect the toughness of embrittled 2.25Cr-1Mo steels
M. A. Islam, J. F. Knott, P. Bowen
Enrichment of fine mica originating from rock aggregate production and its influence on the mechanical properties of bituminous mixtures
K. Miskovsky
Fatigue crack growth resistance of SiCp reinforced Al alloys: Effects of particle size, particle volume fraction, and matrix strength
M. T. Milan, P. Bowen
Effect of superheat, mold, and casting materials on the metal/mold interfacial heat transfer during solidification in graphite-lined permanent molds
K. Narayan Prabhu, K. M. Suresha
Carbon restoration for decarburized layer in spring steel
Y. Prawoto, N. Sato, I. Otani, M. Ikeda
Fatigue studies of polyurethane sandwich structures
S. C. Sharma, M. Krishna, H. N. Narasimha Murthy, M. Sathyamoorthy, Debes Bhattacharya
Friction and wear characteristics of polymer-matrix friction materials reinforced by brass fibers
Jia Xian, Ling Xiaomei