Issue 5/2018
Content (58 Articles)
The Effect of Prestrain Temperature on Kinetics of Static Recrystallization, Microstructure Evolution, and Mechanical Properties of Low Carbon Steel
Edris Akbari, Kourosh Karimi Taheri, Ali Karimi Taheri
Microstructures and Mechanical Properties of Inconel 718 Alloy at Ultralow Temperatures
C. G. Yao, H. J. Lv, D. Q. Yi, S. Meng, L. R. Xiao, B. Wang
Effect of the As-Forged and Heat-Treated Microstructure on the Room Temperature Anisotropic Ductile Fracture of Inconel 718
Javad Teimouri, Seyed Rahman Hosseini, Khosro Farmanesh
Mechanical Properties of Advanced Gas-Cooled Reactor Stainless Steel Cladding After Irradiation
Claude Degueldre, James Fahy, Oleg Kolosov, Richard J. Wilbraham, Max Döbeli, Nathalie Renevier, Jonathan Ball, Stefan Ritter
Adhesive and Cohesive Strength in FeB/Fe2B Systems
A. Meneses-Amador, D. Blancas-Pérez, R. Corpus-Mejía, G. A. Rodríguez-Castro, J. Martínez-Trinidad, L. F. Jiménez-Tinoco
Effect of Al on Grain Refinement and Mechanical Properties of Mg-3Nd Casting Alloy
Lei Wang, Yicheng Feng, Liping Wang, Yanhong Chen, Erjun Guo
Effect of Bainitic Microstructure on Ballistic Performance of Armour Steel Weld Metal Using Developed High Ni-Coated Electrode
A. K. Pramanick, H. Das, G. M. Reddy, M. Ghosh, S. Nandy, T. K. Pal
Synthesis and Comparison of Two cBN Composites with Starting Ternary Carbide Binders
Zhenming Yue, Limin Yang, Jianhong Gong, Jun Gao
Enhanced Impact Toughness at Ambient Temperatures of Ultrafine-Grained Al-26 wt.% Si Alloy Produced by Equal-Channel Angular Pressing
Jinghua Jiang, Ting Yuan, Jun Shi, Lingling Zhang, Aibin Ma, Dan Song
Anticorrosive Behavior and Porosity of Tricationic Phosphate and Zirconium Conversion Coating on Galvanized Steel
Camilo S. Velasquez, Egnalda P. S. Pimenta, Vanessa F. C. Lins
Microstructure and Strain Rate-Dependent Tensile Deformation Behavior of Fiber Laser-Welded Butt Joints of Dual-Phase Steels
Yang Liu, Danyang Dong, Zhiqiang Han, Zhibin Yang, Lu Wang, Qingwei Dong
Effect of TiO2 Nanofiller Concentration on the Mechanical, Thermal and Biological Properties of HDPE/TiO2 Nanocomposites
Mohammad Sayem Mozumder, Abdel-Hamid I. Mourad, Anusha Mairpady, Hifsa Pervez, Md Emdadul Haque
Electrochemical Behavior of Sn-9Zn-xTi Lead-Free Solders in Neutral 0.5M NaCl Solution
Zhenghong Wang, Chuantong Chen, Jinting Jiu, Shijo Nagao, Masaya Nogi, Hirotaka Koga, Hao Zhang, Gong Zhang, Katsuaki Suganuma
Mechanical Behavior of Commercially Pure Titanium Weldments at Lower Temperatures
R. K. Gupta, V. Anil Kumar, X. Roshan Xavier
Composites Strengthened with Graphene Platelets and Formed in Semisolid State Based on α and α/β MgLiAl Alloys
Jan Dutkiewicz, Łukasz Rogal, Przemyslaw Fima, Piotr Ozga
Investigation of Corrosion Behavior of Ti/TiN Multilayers on Al7075 Deposited by High-Vacuum Magnetron Sputtering in 3.5% NaCl Solution
Esfandiar Molavi, Ali Shanaghi, Paul K. Chu
X-ray Diffraction Investigation of Annealing Behavior of Peened Surface Deformation Layer on Precipitation Hardening Stainless Steel
Junjie Huang, Zhou Wang, Jin Gan, Ying Yang, Feng Huang, Gang Wu, Qingshuai Meng
Microstructure and Mechanical Properties of Stainless Steel/Brass Joints Brazed by Sn-Electroplated Ag Brazing Filler Metals
Xingxing Wang, Jin Peng, Datian Cui
Effect of the Combined Addition of Y and Ti on the Second Phase and Mechanical Properties of China Low-Activation Martensitic Steel
Yangpeng Zhang, Dongping Zhan, Xiwei Qi, Zhouhua Jiang, Huishu Zhang
Influence of Sodium Silicate/Sodium Alginate Additives on Discharge Performance of Mg–Air Battery Based on AZ61 Alloy
Jingling Ma, Guangxin Wang, Yaqiong Li, Wuhui Li, Fengzhang Ren
Investigation of Mechanical and Electromagnetic Interference Shielding Properties of Nickel–CFRP Textile Composites
Alexandre Tugirumubano, Santhiyagu Joseph Vijay, Sun Ho Go, Lee Ku Kwac, Hong Gun Kim
Phase Transformation and Lattice Parameter Changes of Non-trivalent Rare Earth-Doped YSZ as a Function of Temperature
Shengli Jiang, Xiao Huang, Zhang He, Andrew Buyers
Simulation Analysis and Performance Study of CoCrMo Porous Structure Manufactured by Selective Laser Melting
Zhang Guoqing, Li Junxin, Li Jin, Zhang Chengguang, Xiao Zefeng
Effect of Heat Treatment on the Properties of CoCrMo Alloy Manufactured by Selective Laser Melting
Zhang Guoqing, Li Junxin, Zhou Xiaoyu, Li Jin, Wang Anmin
B2 Grain Growth Behavior of a Ti-22Al-25Nb Alloy Fabricated by Hot Pressing Sintering
Jianbo Jia, Wenchao Liu, Yan Xu, Chen Chen, Yue Yang, Junting Luo, Kaifeng Zhang
Tribological and Corrosion Properties of Coatings Produced by Plasma Electrolytic Oxidation on the ZA27 Alloy
Guangyin Li, Yifan Mao, Zhijian Li, Linlin Wang, Herbert DaCosta
Promising Hard Carbon Coatings on Cu Substrates: Corrosion and Tribological Performance with Theoretical Aspect
A. Madhan Kumar, R. Suresh Babu, I. B. Obot, Akeem Yusuf Adesina, Ahmed Ibrahim, A. L. F. de Barros
Interaction Between Graphene-Coated SiC Single Crystal and Liquid Copper
M. Homa, N. Sobczak, J. J. Sobczak, A. Kudyba, G. Bruzda, R. Nowak, K. Pietrzak, M. Chmielewski, W. Strupiński
Enhanced Hot Tensile Ductility of Mg-3Al-1Zn Alloy Thin-Walled Tubes Processed Via a Combined Severe Plastic Deformation
A. Fata, M. Eftekhari, G. Faraji, M. Mosavi Mashhadi
Influence of Silicate Concentration in Electrolyte on the Growth and Performance of Plasma Electrolytic Oxidation Coatings Prepared on Low Carbon Steel
Wenbin Yang, Zhenjun Peng, Baixing Liu, Weimin Liu, Jun Liang
Microstructural Characteristics and Mechanical Properties of an Electron Beam-Welded Ti/Cu/Ni Joint
Feng Zhang, Ting Wang, Siyuan Jiang, Binggang Zhang, Jicai Feng
Plasma-Sprayed Titania and Alumina Coatings Obtained from Feedstocks Prepared by Heterocoagulation with 1 wt.% Carbon Nanotube
Sudhakar C. Jambagi, Anish Agarwal, Nilmoni Sarkar, P. P. Bandyopadhyay
Effects of Pouring Temperature and Electromagnetic Stirring on Porosity and Mechanical Properties of A357 Aluminum Alloy Rheo-Diecasting
An Guo, Junwen Zhao, Chao Xu, Hu Li, Jing Han, Xu Zhang
Effect of Sputtering Current on the Comprehensive Properties of (Ti,Al)N Coating and High-Speed Steel Substrate
Yongyao Su, Liangliang Tian, Rong Hu, Hongdong Liu, Tong Feng, Jinbiao Wang
Effect of Hot Rolling on the Microstructure and Mechanical Properties of Nitrogen Alloyed Austenitic Stainless Steel
S. Chenna Krishna, N. K. Karthick, Abhay K. Jha, Bhanu Pant, Roy M. Cherian
Effect of Electropulsing-Assisted Ultrasonic Nanocrystalline Surface Modification on the Surface Mechanical Properties and Microstructure of Ti-6Al-4V Alloy
Yongda Ye, Haibo Wang, Guoyi Tang, Guolin Song
Effect of TiN Addition on 3Y-TZP Ceramics with Emphasis on Making EDM-Able Bodies
Mahnoosh Khosravifar, Seyyed Mohammad Mirkazemi, Mahdiar Taheri, Farhad Golestanifard
Ultrafine-Grained Pure Ti Processed by New SPD Scheme Combining Drawing with Shear
A. G. Raab, E. V. Bobruk, G. I. Raab
Grain Refinement by Authigenic Inoculation Inherited from the Medium-Range Order Structure of Ni-Cr-W Superalloy
Zhongtang Gao, Rui Hu, Wei Guo, Chuanwei Zhang
Investigation of Mixed-Type Craters and the Role of Bifluoride Additives to Produce Zirconia-Toughened Alumina-Based PEO Coating
Zeeshan Ur Rehman, Seong Hun Shin, Tanveer Ahmad, Bon Heun Koo
The Effect of Mo Particles Addition in Ag-Cu-Ti Filler Alloy on Ti(C,N)-Based Cermet/45 Steel-Brazed Joints
Hu He, Xueming Du, Xiaokai Huang, Weijian Xu, Zhenhua Yao
Microstructural Evolution of NiCrBSi Coatings Fabricated by Stationary Local Induction Cladding
Xuliang Chen, Xunpeng Qin, Kai Gao, Zhenhua Zhu, Feng Huang
Densification, Microstructural Evolution, Mechanical Properties and Oxidation Study of CrB2 + EuB6 Composite
K. Raju, J. K. Sonber, T. S. R. Ch. Murthy, K. Sairam, S. Majumdar, V. Kain, G. V. S. Nageswar Rao
Constitutive Modeling of the High-Temperature Flow Behavior of α-Ti Alloy Tube
Yanli Lin, Kun Zhang, Zhubin He, Xiaobo Fan, Yongda Yan, Shijian Yuan
Effect of Low-Temperature Sensitization on the Corrosion Behavior of AISI Type 304L SS Weld Metal in Simulated Groundwater
Girija Suresh, T. Nandakumar, A. Viswanath
A Study on the Corrosion Behavior of Carbon Steel Exposed to a H2S-Containing NH4Cl Medium
Hai-bo Wang, Yun Li, Guang-xu Cheng, Wei Wu, Yao-heng Zhang
Low-Velocity Impact Behavior of Sandwich Structures with Additively Manufactured Polymer Lattice Cores
Andrew J. Turner, Mohammed Al Rifaie, Ahsan Mian, Raghavan Srinivasan
Investigation of Hydrogen Embrittlement Susceptibility of X80 Weld Joints by Thermal Simulation
Huangtao Peng, Teng An, Shuqi Zheng, Bingwei Luo, Siyu Wang, Shuai Zhang
Effects of Multiple Rejuvenation Cycles on Mechanical Properties and Microstructure of IN-738 Superalloy
Cosimo Monti, Alessandro Giorgetti, Leonardo Tognarelli, Francesco Mastromatteo
Effects of Stress Ratio and Microstructure on Fatigue Failure Behavior of Polycrystalline Nickel Superalloy
H. Zhang, Z. W. Guan, Q. Y. Wang, Y. J. Liu, J. K. Li
Analyses of Small Punch Creep Deformation Behavior of 316LN Stainless Steel Having Different Nitrogen Contents
J. Ganesh Kumar, K. Laha, V. Ganesan, G. V. Prasad Reddy
The Prediction of Microstructure Evolution of 6005A Aluminum Alloy in a P-ECAP Extrusion Study
Shi Lei, Wen Jiu-Ba, Ren Chang
Prediction of the Stress–Strain Behavior of Open-Cell Aluminum Foam under Compressive Loading and the Effects of Various RVE Boundary Conditions
Behrang Hamidi Ghaleh Jigh, Mohammad Ali Farsi, Hossein Hosseini Toudeshky
Simulation Kinetics of Austenitic Phase Transformation in Ti+Nb Stabilized IF and Microalloyed Steels
Sumit Ghosh, S. M. Dasharath, Suhrit Mula