Issue 5/2026
Content (74 Articles)
Advances in Defect Analysis and Performance of Laser-Metal Inert Gas Hybrid Welded Aluminum Alloy Joints
- Review
Xiaocui Wu, Changjun Liu, Ting Zou, Tianyu Liu, Xiyue Du
Al/Steel Tubular Bimetallic Structure Fabricated by Rotary Wire Arc Surfacing
- Original Research Article
Gaoyang Yu, Guochao Yin, Shuhai Chen, Zhiyi Zhao, Jihua Huang, Jian Yang
Refill Friction Stir Spot Welding 6063/2060 Al Alloys: Effect of Tool Plunging Speed on Microstructure and Properties of the Welded Joints
- Original Research Article
Xuesong Liu, Zhengwei Li
Microstructure Evolution of 6061 Aluminum Alloy Sheet Produced by CARB and Subsequent Aging Treatment
- Original Research Article
Ling Ou, Guan-hong Li, Lin-yan Li, Cai-he Fan, Jun-wei Liu, Jian-jun Yang, Zai-jun Su, Yu-jie Zhao, Wu-dan Ma, Da Gao, Si-qi Wu
A Multilevel-Structured Multifunctional Superhydrophobic Surface Prepared by Nanosecond Laser
- Original Research Article
Bingyang Yuan, Jiale Zhang, Weijie Yu, Juan Song, Ye Dai
Microstructure Evolution and Mechanical Properties of Stirred Zone on Multi-pass High Speed Friction Stir Processed Al-Mg-Si Alloy: Revealing the Effect of Processing Passes
- Original Research Article
Yan Ji, Yue Mao, Fenjun Liu
Study on the Strengthening Mechanism of Shot Peening Process of 2024-T351 Aluminium Alloy for Aviation
- Original Research Article
Peng Zhang, Anqiang Zhu, Jian Ning, Liying Zhang, Zhiyang He, Ziyu Wang, Benqi Jiao
Research on the Microstructure and Mechanical Properties of Hot-Rolled Fe-Mn-Al-C Nickel-Free Cryogenic Steel
- Original Research Article
Xiaofeng Zhang, Zhongyong Yang, Xinlei Zhao, Lele Dai, Yong Yang
Correction: Research on the Microstructure and Mechanical Properties of Hot-Rolled Fe-Mn-Al-C Nickel-Free Cryogenic Steel
- Correction
Xiaofeng Zhang, Zhongyong Yang, Xinlei Zhao, Lele Dai, Yong Yang
Effect of C Content on Microstructure and Mechanical Performance of Carbide Reinforced Ni-Co-Cr-Mo Matrix Composites
- Original Research Article
Chao Li, Ziming Zeng, Jianwei Teng, Xiaojuan Gong, Yunping Li
Self-organized Titania Nanotubes on Curved Surfaces for Bioimplant Applications
- Original Research Article
Surya Prakash Singh, Priyabrata Sahoo, Karali Patra
Effect of Rolling Temperature on the Microstructure, Texture, and Mechanical Properties of 1060/SiCnw-Al/1060 Sandwich Composites
- Original Research Article
Zhijie Wang, Jiaqi Wang, Wenchang Liu, Jigang Chen, Sha Liu
Investigation of an Environmentally Friendly EDM Process for Nitinol: A Comparative Study of Dielectrics and Tool Electrodes
- Original Research Article
M. Muniraju, Gangadharudu Talla
Research on the Preparation Process of Superhydrophobic Titanium Alloy Surface Using Picosecond Laser
- Original Research Article
Xiaoling Sun, Yuyao Li, Linfeng Xie, Chunying Pang, Yanjun Sun, Kuan Luo, Ming Tian, Fei Wang
The Influence of Different Oscillation Paths on the Microstructure and Properties of Laser-Welded Joints of Al-Si-Coated 22MnB5 Steel
- Original Research Article
Wei Xu, Shanglu Yang, Wu Tao, Xuzhi Zhang, Kaikui Zheng, Guijie Wu
Investigation of Cr21Co21Fe21Ni21Mn11Nb5 High Entropy Alloy for Intermediate Temperature Solid Oxide Fuel Cell Interconnect
- Original Research Article
Naveen Kumar, Sujit Das, Nitesh Kumar Jha, Sheela Singh
Influence of Process Parameters on Forming Quality and Microstructural Evolution in Shear Spinning of 6061 Aluminum Alloy Conical Parts
- Original Research Article
Shunxin Liu, Fujun Wu, Kaixuan Li, Guang Zeng, Wenguang Liu, Chunjiang Zhao, Menghao Bao
On 3D Printing of Polylactic Acid-17-4 Precipitate Hardened Stainless Steel Composite for Orthodontic Applications
- Original Research Article
Minhaz Husain, Gurwinder Singh, Ajit Kumar, Vinay Kumar, Ranvijay Kumar, Rupinder Singh
Droplet Transfer and Formation in Aluminum Alloy CMT-PADV Additive Manufacturing
- Original Research Article
Hang Yin, Yongquan Han, Zhenbang Sun, Maohua Du, Liguo Zhang, Linghong Meng
Processing and Characterization of Al Metal Matrix Composites with W-Fe-Ti-Based Reinforcements
- Original Research Article
Ipsita Madhumita Das, Animesh Mandal, Srikant Gollapudi
Tensile Strength Assessment of FDM-PLA/CF Specimens Fabricated Using Orthogonal Experimental Design and Artificial Neural Network Approach
- Original Research Article
Mengyu Cao, Dehao Tian, Xu Zhang, Chaoyu Li, Xue Guo, Baojin Wang
Investigation of Printing Temperature on Microstructure and Mechanical Performance of PLA Components Fabricated by Fused Filament Fabrication
- Original Research Article
Lei Qiang, Dehao Tian, Xu Zhang, Hao Gao, Xue Guo, Baojin Wang
Optimization of Welding Parameters to Prevent Angular Distortion of Mild Steel Wire Arc Additive Manufacturing Parts
- Original Research Article
Ezgi Dogan, Mustafa Ay, Memduh Kurtulmus
Thermal in-situ Monitoring and Predictive Control for Wire-Laser DED Using Feedforward–Feedback Coupling
- Original Research Article
Ruifang Ye, Feng Chen, Yi Li, Chaofan Liu, Yuhang Pan, Zhenzhong Wang
Influence of Peak Current and Duration on Droplet Transfer of High-Nitrogen Austenitic Stainless Steel Wire in Cold Metal Transfer Welding
- Original Research Article
Dejun Yan, Zhongliang Jiang, Wenjian Liao, Dongqing Yang, Xiaopeng Li
Effect of Laser Remelting Power on Microstructural Evolution and Tribological Behavior of CuPb10Sn10 Anti-Friction Coatings
- Original Research Article
Gangliang Zhao, Chunjing Liu, Tianlu Wei, Linting Chen
The Effect of Overtemperature on the Microstructure and High-Cycle Fatigue Property of DD32 Single Crystal Alloy
- Original Research Article
Chang-tai Jiang, Jin-lai Liu, Jin-jiang Yu, Yi-zhou Zhou, Xiao-feng Sun
Effect of Oil Contamination on the Quenching Properties of 45 Steel
- Original Research Article
Yaohua Dong, Mingmou Han, Dongyang Wu, Jinjin Wei, Yuanyuan Shen
Effect of Initial Aging on the Precipitation and Corrosion Behavior in the Heat-Affected Zone of 7085 Alloy Friction Stir Welded Joints
- Original Research Article
Jianan Yang, Zhiqiang Ru, Ming Liu, Zhimin Pi, Lili Wei, Hongfeng Huang, Shuhui Liu, Degui Li
A Grain Growth Model for GH625 Alloy with Wide Temperature Range
- Original Research Article
Liqun Niu, Kaixiong Cheng, Xuming Wang, Bingzheng Wang, Quanzhen Sun, Shengmao Dong, Zhenglong Liang
Effects of Trace Antimony and Heat Treatment on the Microstructures and Wear Properties of 4Y32-T6 Wrought Alloys
- Original Research Article
Chin-Wei Hsu, Wei-Hsin Chen, Chen-Chieh Hsiung, Mien-Chung Chen, Sheng-Long Lee, Yang-Chun Chiu
Study on the Self-sintering behavior of Uncalcined Materials toward Outstanding Mechanical Seal Performance
- Original Research Article
Mingyang Li, Zhang Wu, Kun Luo
Effect of Heat Treatment on the Properties of Pulsed Electrodeposited Ni-P/Ni-Mo Bilayer Coatings
- Original Research Article
Jiachen Liu, Changhao Qi, Yi Luo, Zekun Gao, Yuting Zhang, Jiyang Ying, Yiku Xu, Qinyang Zhao, Yongnan Chen, Qinqin Li, Wenzhong Luo
Evaluation of Alternative Heat Treatments for the Improvement of Tempcore Method in Reinforcing Steel Production
- Original Research Article
Ugur Avci, Abdulkadir Gulec
Effect of Solution Time on κ-Carbide Precipitation and Mechanical Properties in Fe-30Mn-8Al-0.9C Low-Density Steel
- Original Research Article
Mei Xing, Xiao-feng Zhang, Jia-wang Xu, Yong Yang
Effect of Cold-Rolling on Microstructure Variations and Strength Enhancement of High-Strength Mg-12.2Gd-2.2Y-1.2Zn-0.5Mn (wt.%) Alloy
- Original Research Article
Ning Su, Chenyang Ding, Qianye Wu, Yujuan Wu, Liming Peng
Microstructural Evolution and Cracking Mechanism of K423A Alloy in Aeroengine Inner Casing
- Original Research Article
Jianjun He, Di Yang, Biqing Yao, Weiping Li, Zhihui Gong
The Glass-Free Grain Boundary in HIP-Processed Silicon Nitride Ceramic Balls
- Original Research Article
Feng Sun, Jia-Xing Bao, Song Chen, Ming-Liang Zhao, Zai-Yi Wang, De-Chang Jia, Wei-Ru Zhang, Wei-Guo Wang
Study of Mechanical, Tribological and Electrochemical Behavior of CrN Coating Deposited by Magnetron Cathodic Spray
- Original Research Article
Salah Bouaicha, Mohamed Zine Touhami, Riad Badji, Mounira Bourebia, Khaled Laggoune
Effect of Double-Acid Etching (HNO3/HCl) Temperature on the Surface and Electrochemical Properties of TixNbySn Alloys (x = 35; 45% and y = 0; 2.5; 5.0; 7.5%) for Biomedical Applications
- Original Research Article
Mayesk Alves Rocha, Myllena Vieira Silva, Emanoel Carlos Simas Barboza, Alana Santos Oliveira, Eduarda Vieira Lima, Sandro Griza, Carlos Otavio Damas Martins
Influence of Secondary Ceramic Additives on the Tribological Performance of Plasma Sprayed Cr2O3 Composite Coating
- Original Research Article
P. Manojkumar, B. Kalyani, D. Vijaya Lakshmi, P. Suresh Babu, G. Sivakumar
Experimental Investigation of CeO2 Coatings with Variation in Deposition Time on Grade V Titanium Alloy by Radio Frequency Sputtering
- Original Research Article
C. Bala Manikandan, N. Selvakumar
Influence of Cooling and Post-weld Aging on Mechanical and Fatigue Properties of Friction Stir Welded Al-Cu-Mg Alloy
- Original Research Article
Ratnesh Kumar Raj Singh, Sachin Rathore, Mandeep Kumar
Simultaneously Enhanced Strength and Plasticity of 2024 Aluminum Alloy Fusion Welds by Sc/Zr Microalloyed AlMg6 Filler
- Original Research Article
Renyao Qin, Guohui Zhang, Zhiqi Qu, Bingqing Chen, Bingbing Sun, Jian Zhang, Yipeng Wang, Hongbin Zhu, Jie Ren
Effect of Cold Deformation on Mechanical and Corrosion Properties of SS316L Gyroid Structures Fabricated through Selective Laser Melting
- Original Research Article
Rajkumar R. Shashank, K. Praveenkumar, Cheirmadurai Kalirajan, S. Solomon Bobby, Geetha Manivasagam, Rajeshkannan Ananthanarayanan, A. K. Jeevanantham
Multi-scale Optimization and Computational Validation for Enhancing the Microstructure, Mechanical Properties, and Physical Performance of Wire Arc Additive Manufacturing-Fabricated SS309L Stainless Steel
- Original Research Article
S. Tamil Prabakaran, Saravanakumar Sengottaiyan, D. Yogaraj, V. S. Shaisundaram
Preparation and Corrosion Resistance of Zinc–Nickel Superhydrophobic Coatings by Surface Etching of Magnesium Alloy
- Original Research Article
Qingrong Tan, Jiyuan Zhu, Lei Cheng
Optimization of Nitinol Wire Reinforcement in Al5083 Composites: Influence of Wire Diameter and Volume Fraction
- Original Research Article
Shivam Mishra, Mukesh Kumar, Amar Patnaik
Temperature-Dependent Mechanical Properties and Interfacial Microstructural Evolution of a 2-ply Clad Sheet
- Original Research Article
Bijendra Prasad, Vijay Gautam
Multi-Objective Optimization of Cold-Rolled Al-Li Alloy Produced via Powder Metallurgy Using Taguchi-Based Grey Relational Analysis
- Original Research Article
Divnesh Lingam, Rajeshkannan Ananthanarayanan, A. K. Jeevanantham
Effect of Multi-layer and Multi-pass Welding on the Microstructure and Properties of V-N-Cr Weathering Steel
- Original Research Article
Yue Liu, Xiao-Ming Zheng, Ao Yang, Meng-Ze Ma, Lin-Xiu Du
Sinter-Melting Composite Process for the Preparation of Al-V-B Refiners
- Original Research Article
Zhiqiang Guo, Jiawei Zhu, Wenda Zhang, Peikang Bai, Jun Liu
Influence of Heat Exposure Post-Laser Surface Melting on the Microstructure, Tribological, and Mechanical Behavior of New Modified AlSiMg Powder Alloy
- Original Research Article
Mohammad Alshah, Alexey S. Prosviryakov, Alexey N. Solonin, Asmaa M. Khalil
Machine Learning-Based Design and Optimization of Rotary Friction Welds in Dissimilar Inconel 625/825 Alloys Using Novel Joint Geometries
- Original Research Article
M. Krishna, A. Mathivanan
Influence of Geometry and Infill Density on the Mechanical Performance of Additively Manufactured Ti6Al4V Triply Periodic Minimal Surface Lattice Structures for Biomedical Implants
- Original Research Article
R. Murali Krishnan, Rajesh Ranganathan, A. Saiyathibrahim
Microscopic Mechanism for the Interfacial Diffusion in Mo/Si Multilayers from Molecular Dynamics Simulations
- Original Research Article
Meifeng Qiu, Chuan-Xin Cui, Yu Li, Jin-Wu Jiang
Integrated Computational Framework for Prediction of Porosity during Continuous Casting of Copper
- Original Research Article
Sandeep Pusuluri, Shahin Ahmad, Himanshu Nirgudkar, Surya Ardham, Bhavin Desai, Vilas Tathavadkar, Subhankar Saha, Linu Panchaman, Umesh Singh, B. P. Gautham, Gerald Tennyson
Predicting the Individual Heat-Affected Zone Properties of Laser Welded DP980 Using the Bayesian Approach
- Original Research Article
Yonghao Zhao, Kaiyuan Chen, Yu Zhang, Guang Cheng
Design of Biodegradable Magnesium Alloy Using Bi-objective Genetic Programming and Multi-objective Genetic Algorithm in Tandem
- Original Research Article
Rahul Mukherjee, Shubhabrata Datta
Relationship Between Properties and Alloy Design Parameters of Multicomponent Titanium Alloys Analyzed by Gray System Model
- Original Research Article
Xin Li, Liyao Wang, Hui Wang, Zhanlin Hou, Rui Huang
Impact of Twin Spacing and Thickness on Mechanical Properties and Nanostructure Evolution in Fe-Cr-Ni Alloy: A Molecular Dynamics Study
- Original Research Article
Arun Kumar, Ashok Kumar, Sunil Kumar
Experimental and Numerical Investigation of Industrial-Grade AA6061 T6 for Improved Forming Qualities in Incremental Forming
- Original Research Article
Viren Mevada, Rakesh Bose, Harit Raval
Tribological Performance of 304 Stainless Steel with Surface Texture Fabrication in CuSO4 Liquid Using Laser Method
- Original Research Article
Hui Yang, Zhenjiang Li, Cuiya Feng, Minghua Pang
Insensitivity of Fatigue Lives to Stress Gradient in Additive Manufacturing TC4 Alloy
- Original Research Article
Yining Zhang, Jiapeng Hou, Xiaotao Li, Zhan Qu, Yankun Zhu, Xin Bai, Hanzhong Liu, Zhenkai Zhao, Lijia Chen, Zhenjun Zhang, Zhefeng Zhang
A Comparing Study on Low-Velocity Impact Properties of Basalt and Carbon Fibers Reinforced Asymmetrical Laminates/Aluminum Alloy 6061-T651 by Self-pierce Riveting
- Original Research Article
Zhi-Chao Huang, Hai-Zhou Li, Yu-Qiang Jiang
Study on the Properties of High-Temperature and High-Strength Copper Alloy Matrix Friction Materials
- Original Research Article
Mingjuan Zhao, Wenjia Li, Longzhi Zhao, Gen Li, Yong Hu, Haitao Jiao, Hongbing Yu
Research on Corrosion Fatigue Life of Zr-Mo Titanium Alloy Affected by Hydrochloric Acid Concentration Based on Support Vector Machine Method
- Original Research Article
Lihong Han, Shangyu Yang, Jing Cao, Wenlan Wei
Friction-Wear Synergies of Hybrid Carbon Fiber-Aramid Pulp in Cu-Free Phenolic Friction Composites and the Favorable Tribosurface
- Original Research Article
Dongxin He, Zhongwei Li, Bing Yang, Xiuhu Guo, Fan Xu
Sustainable Lubrication Strategies in Eco-friendly Machining of AISI 4140 Steel: Performance and Environmental Impact Analysis Using Machine Learning
- Original Research Article
Mustafa Kuntoğlu, Havva Demirpolat, Rüstem Binali, Mehmet Erdi Korkmaz, Mayur Makhesana, Kübra Kaya
Effect of Interfacial Reaction Layer on Functional and Mechanical Characteristics of Fe-Co/Al-Si Composites
- Original Research Article
Yudai Ishigami, Koshi Iki, Yasuhiro Egawa, Tadaaki Satake, Fumio Narita, Go Murasawa
Correction on the Stress–Strain Curve in the Split-Hopkinson Tensile Bar Test with Clamped Flat Specimen: Copper as an Example
- Original Research Article
Shuopeng Xu, Shuqing Yang, Guisen Liu, Yao Shen
Effect of Alloy Composition, Solidification Rate, Porosity Level, Grain Refining and Modification on the Performance of Aluminum-Based Alloys
- Original Research Article
H. W. Doty, H. R. Ammar, A. M. Samuel, V. Songmene, F. H. Samuel
Optimization of FDM-PLA Process Parameters and Additive Manufacturing of Skull Defect Protective Cover
- Original Research Article
Jiangang Chen, Jiahao Shi, Siyu Mao, Wei Zhao, Yanlong Peng
Experimental Investigation and Optimization of the Machining Properties of Aluminum AL5356 Deposited with Cold Metal Transfer Wire Arc Additive Manufacturing
- Original Research Article
Sachin Kumar, Vishal S. Sharma, Gurraj Singh, Shiva Sekar
