Skip to main content
main-content
Top

Journal

Journal of Materials Engineering and Performance

Journal of Materials Engineering and Performance 6/2016

Issue 6/2016

Table of Contents ( 50 Articles )

26-04-2016 | Issue 6/2016 Open Access

Alloying Element Nitride Development in Ferritic Fe-Based Materials Upon Nitriding: A Review

T. Steiner, E. J. Mittemeijer

02-05-2016 | Issue 6/2016

Inverse Thermal Analysis of Steel Welds Using Solidification-Boundary Constraints

S. G. Lambrakos

10-05-2016 | Issue 6/2016

Effect of Material Inhomogeneity on Thermal Performance of a Rheocast Aluminum Heatsink for Electronics Cooling

M. Payandeh, I. Belov, A. E. W. Jarfors, M. Wessén

11-05-2016 | Issue 6/2016

Microstructure Modeling of a Ni-Fe-Based Superalloy During the Rotary Forging Process

A. Loyda, G. M. Hernández-Muñoz, L. A. Reyes, P. Zambrano-Robledo

26-04-2016 | Issue 6/2016

Effects of Heat Treatment on Microstructural Modification of As-Cast Gamma-TiAl Alloy

Mehdi Ahmadi, Seyed Rahman Hosseini, Seyed Mohammad Mehdi Hadavi

11-05-2016 | Issue 6/2016

Effect of Prior and Post-Weld Heat Treatment on Electron Beam Weldments of (α + β) Titanium alloy Ti-5Al-3Mo-1.5V

V. Anil Kumar, R. K. Gupta, Sushant K. Manwatkar, P. Ramkumar, P. V. Venkitakrishnan

01-06-2016 | Issue 6/2016

Bonding Interface and Bending Deformation of Al/316LSS Clad Metal Prepared by Explosive Welding

Xunzhong Guo, Minyu Fan, Liuan Wang, Fuye Ma

01-06-2016 | Issue 6/2016

Microstructure and Properties of FeAlCrNiMo x High-Entropy Alloys

X. C. Li, D. Dou, Z. Y. Zheng, J. C. Li

01-06-2016 | Issue 6/2016 Open Access

A New XRD Method to Quantify Plate and Lath Martensites of Hardened Medium-Carbon Steel

Quanshun Luo

01-06-2016 | Issue 6/2016

Preparation and Thermoelectric Properties of Sn-Based Type VIII Single-Crystalline Clathrate Via a-Sn Flux Method

Feng Cheng, Lanxian Shen, Decong Li, Hongxia Liu, Jinsong Wang, Shukang Deng

01-06-2016 | Issue 6/2016

Microstructure and Mechanical Behavior of Al 7075-T6 Subjected to Shallow Cryogenic Treatment

K. Mohan, J. A. Suresh, Palaniappan Ramu, R. Jayaganthan

01-06-2016 | Issue 6/2016

Effect of Heat Treatment on Microstructure and Hot Impact Toughness of Various Zones of P91 Welded Pipes

C. Pandey, M. M. Mahapatra

25-04-2016 | Issue 6/2016

Performance of New Pb-Bi Alloys for Pb-Acid Battery Applications: EIS and Polarization Study

Leandro C. Peixoto, Ausdinir D. Bortolozo, Amauri Garcia, Wislei R. Osório

25-04-2016 | Issue 6/2016

Effect of Micro- and Nano-SiC Particulate Reinforcements in Magnesium-Based Metal Matrix Composites

Ming-Jie Shen, Tao Ying, Fu-Yu Chen, Jun-Ming Hou

26-04-2016 | Issue 6/2016

Deformation Behavior Immediately After Indentation Load Change in Ultrafine-Grained Al-Mg Solid Solution Alloys

Hidenari Takagi, Masami Fujiwara

28-04-2016 | Issue 6/2016

Grain Boundary Character Distribution of TLM Titanium Alloy During Deformation

X. F. Bai, Y. Q. Zhao, Z. Q. Jia, Y. S. Zhang, B. Li

29-04-2016 | Issue 6/2016 Open Access

Microstructure and Corrosion Behavior of Hot-Deformed and Cold-Strained High-Mn Steels

A. Grajcar, M. Kciuk, S. Topolska, A. Płachcińska

05-05-2016 | Issue 6/2016

Effect of Strain Rate on Deformation Behavior of AlCoCrFeNi High-Entropy Alloy by Nanoindentation

L. Tian, Z. M. Jiao, G. Z. Yuan, S. G. Ma, Z. H. Wang, H. J. Yang, Y. Zhang, J. W. Qiao

05-05-2016 | Issue 6/2016 Open Access

Properties of Light MMCs Modified with Cordierite Synthesized from Fly Ash

Piotr Długosz, Angelika Rączka, Adrian Kopeć, Rudolf Krzyżak, Paweł Darłak, Marek Hebda

10-05-2016 | Issue 6/2016

Constitutive Equations and Flow Behavior of an As-Extruded AZ31 Magnesium Alloy Under Large Strain Condition

Yuanyuan Dong, Cunsheng Zhang, Xing Lu, Cuixue Wang, Guoqun Zhao

11-05-2016 | Issue 6/2016

Influence of Diamond Particles Coated with TiO2 Film on Wettability of Vitrified Bond and Transverse Rupture Strength (TRS) of Vitrified Bond Composites

Dongdong Song, Long Wan, Xiaopan Liu, Weida Hu, Jianwei Li

11-05-2016 | Issue 6/2016

On the Degradation Mechanism of Low-Voltage Underground Cable with Poly(Vinyl Chloride) Insulation

H. M. Tawancy, M. Hassan

01-06-2016 | Issue 6/2016

Formability Evaluation of Sheet Metals Based on Global Strain Distribution

Ling Zhang, Jianping Lin, Junying Min, You Ye, Liugen Kang

01-06-2016 | Issue 6/2016

Effect of Double Aging Heat Treatment on the Short-Term Creep Behavior of the Inconel 718

Felipe Rocha Caliari, Kátia Cristiane Gandolpho Candioto, Antônio Augusto Couto, Carlos Ângelo Nunes, Danieli Aparecida Pereira Reis

25-04-2016 | Issue 6/2016

Magnetic Hysteresis Loop as a Tool for the Evaluation of Microstructure and Mechanical Properties of DP Steels

J. N. Mohapatra, Satendra Kumar, Arbind Kumar Akela, S. Prakash Rao, Marutiram Kaza

28-04-2016 | Issue 6/2016 Open Access

Influence of Binder Adhesion Ability on the Performance of Silicon/Carbon Composite as Li-Ion Battery Anode

Krzysztof Kierzek

02-05-2016 | Issue 6/2016

Influence of Fe3O4 Nanoparticles in Hydroxyapatite Scaffolds on Proliferation of Primary Human Fibroblast Cells

H. Maleki-Ghaleh, E. Aghaie, A. Nadernezhad, M. Zargarzadeh, A. Khakzad, M. S. Shakeri, Y. Beygi Khosrowshahi, M. H. Siadati

04-05-2016 | Issue 6/2016

Effect of Annealing Treatment on Erosion-Corrosion of Zr-Based Bulk Metallic Glass in Saline-Sand Slurry

Xiulin Ji, Yiping Shan, Yueyue Chen, Hui Wang

05-05-2016 | Issue 6/2016

Investigations of Aluminum-Doped Self-Healing Zircaloy Surfaces in Context of Accident-Tolerant Fuel Cladding Research

James Carr, Gokul Vasudevamurthy, Lance Snead, Brian Hinderliter, Caleb Massey

10-05-2016 | Issue 6/2016

Enhancing Thermal Conductivity of Mg-Sn Alloy Sheet by Cold Rolling and Aging

Qiuyan Huang, Aitao Tang, Shida Ma, Hucheng Pan, Bo Song, Zhengyuan Gao, Muhammad Rashad, Fusheng Pan

10-05-2016 | Issue 6/2016

Passivity and Localized Corrosion of AZ31 Magnesium Alloy in High pH Electrolytes

Sultan Alsagabi, Jakraphan Ninlachart, Krishnan S. Raja, Indrajit Charit

10-05-2016 | Issue 6/2016

Microstructure and Scratch Resistance of TaC Dense Ceramic Layer on an Iron Matrix

Nana Zhao, Yunhua Xu, Lisheng Zhong, Honghua Yan, Vladimir E. Ovcharenko

11-05-2016 | Issue 6/2016

Long-Term Anti-Corrosion Performance of a Conducting Polymer-Based Coating System for Steels

Tongyan Pan, Qifeng Yu

01-06-2016 | Issue 6/2016

Effect of Post Weld Heat Treatment on Mechanical and Corrosion Behaviors of NiTi and Stainless Steel Laser-Welded Wires

G. R. Mirshekari, A. Saatchi, A. Kermanpur, S. K. Sadrnezhaad

01-06-2016 | Issue 6/2016

Microstructure and Fatigue Behavior of Friction Stir-welded Noncombustive Mg-9Al-Zn-Ca Magnesium Alloy

L. Zhou, Z. Y. Li, K. Nakata, J. C. Feng, Y. X. Huang, J. S. Liao

01-06-2016 | Issue 6/2016

Microstructure and Tribological Properties of In Situ Synthesized TiN Reinforced Ni/Ti Alloy Clad Layer Prepared by Plasma Cladding Technique

Guo Jin, Yang Li, Huawei Cui, Xiufang Cui, Zhaobing Cai

01-06-2016 | Issue 6/2016

Effect of Hot Coiling Under Accelerated Cooling on Development of Non-equiaxed Ferrite in Low Carbon Steel

H. A. Lanjewar, Pranavkumar Tripathi

25-04-2016 | Issue 6/2016

Precipitation Hardening and Statistical Modeling of the Aging Parameters and Alloy Compositions in Al-Cu-Mg-Ag Alloys

A. M. Al-Obaisi, E. A. El-Danaf, A. E. Ragab, M. S. Soliman

26-04-2016 | Issue 6/2016

Inclusions and Microstructure of Ce-Added Weld Metal Coarse Grain Heat-Affected Zone in Twin-Wire Submerged-Arc Welding

S. F. Yu, N. Yan, Y. Chen

27-04-2016 | Issue 6/2016

Use of Acoustic Emission During Scratch Testing for Understanding Adhesion Behavior of Aluminum Nitride Coatings

R. K. Choudhary, P. Mishra

28-04-2016 | Issue 6/2016

Optimization of Fiber Laser Welding of DP980 Steels Using RSM to Improve Weld Properties for Formability

K. Bandyopadhyay, S. K. Panda, P. Saha

01-06-2016 | Issue 6/2016

Single Point Incremental Forming of an Aged AL-Cu-Mg Alloy: Influence of Pre-heat Treatment and Warm Forming

Amirahmad Mohammadi, Ling Qin, Hans Vanhove, Marc Seefeldt, Albert Van Bael, Joost R. Duflou

05-05-2016 | Issue 6/2016

The Microstructure Evolution and Processing Map of Ni-18.3Cr-6.4Co-5.9W-4Mo Superalloy During Hot Deformation

Shengxue Qin, Jie Liu, Hongbin Zhang, Kaifeng Zhang

06-05-2016 | Issue 6/2016

Tungsten Carbide Grain Size Computation for WC-Co Dissimilar Welds

Dongran Zhou, Haichao Cui, Peiquan Xu, Fenggui Lu

06-05-2016 | Issue 6/2016

Microstructure and Mechanism of Strengthening of Microalloyed Pipeline Steel: Ultra-Fast Cooling (UFC) Versus Laminar Cooling (LC)

J. Zhao, X. Wang, W. Hu, J. Kang, G. Yuan, H. Di, R. D. K. Misra

10-05-2016 | Issue 6/2016

Formation and Microstructure of Ultrafine-Grained Titanium Processed by Multi-Directional Forging

Bingfeng Wang, Xiaoyan Wang, Juan Li

10-05-2016 | Issue 6/2016

Production Process of Biocompatible Magnesium Alloy Tubes Using Extrusion and Dieless Drawing Processes

Piotr Kustra, Andrij Milenin, Bartłomiej Płonka, Tsuyoshi Furushima

10-05-2016 | Issue 6/2016

3D Finite Element Analysis of Spider Non-isothermal Forging Process

Ling Niu, Wei Wei, Kun Xia Wei, Igor V. Alexandrov, Jing Hu

11-05-2016 | Issue 6/2016

Microstructural Characteristics and Mechanical Properties of 7050-T7451 Aluminum Alloy Friction Stir-Welded Joints

L. Zhou, T. Wang, W. L. Zhou, Z. Y. Li, Y. X. Huang, J. C. Feng

12-05-2016 | Issue 6/2016

Effect of Variants of Thermomechanical Working and Annealing Treatment on Titanium Alloy Ti6Al4V Closed Die Forgings

R. K. Gupta, V. Anil Kumar, P. Ram Kumar

Current Publications

Premium Partner

    Image Credits