Journal of Materials Engineering and Performance 6/2022

22-01-2022 | Technical Article

Simultaneous Enhancement of Strength and Toughness in a Medium-Carbon Martensitic Steel by Ti-Mo Addition

Jisheng Guan, Qing Yuan, Qi Zhang, Wenwei Qiao, Guang Xu

03-01-2022 | Technical Article

Effect of Retrogression and Re-aging Treatment on Properties and Microstructure of a New Type of Al–Zn–Mg–Er–Zr Alloy

H. Wu, Z. K. Zheng, W. C. Li, J. T. Lu, S. P. Wen, H. Huang, Z. R. Nie

06-01-2022 | Technical Article

Effects of Heat Treatment on Microstructure and Wear Behavior of Modified Aluminum Bronze Coatings Fabricated by Laser Cladding

T. Y. Yin, S. Zhang, F. Q. Zhou, R. J. Huo, C. H. Zhang, J. Chen

10-01-2022 | Technical Article

Effect of Ferrite/Martensite on Microstructure Evolution and Mechanical Properties of Ultrafine Vanadium Dual-Phase Steel

Bilal Nawaz, Xiaoyan Long, Yanguo Li, Zhinan Yang, Fucheng Zhang

25-01-2022 | Technical Article

The Effect of Cold Work and Thermal Aging on Intergranular and Transgranular Corrosion Failure of High Manganese Austenitic Stainless Steel

Sourabh Shukla, Awanikumar P. Patil, Ankur Bansod

23-01-2022 | Technical Article

Nanoindentation and Tribological Behavior of TiN-TiCN-TiAlN Multilayer Coatings on AISI D3 Tool Steel

A. R. Naghashzadeh, A. Shafyei, F. Sourani

27-01-2022 | Technical Article

Research on Impact–Abrasion–Corrosion Behavior of Three Typical Wear-Resistant Steels under High Impact Energy

J. L. Zou, S. L. Liu, Z. B. Zheng, J. Long, Y. Huang, K. H. Zheng, Z. Tian

07-02-2022 | Technical Article

Mechanical and Tribological Response of [CoN/AlN]n Multilayers Obtained from Laser Ablation

J. C. Caicedo, W. Aperador, H. Riascos

22-01-2022 | Technical Article

Effect of Nd on the Microstructure and Mechanical Properties of Hot Extruded Mg-2.0Sm-0.4Zn-0.4Zr Alloy

Kun Liu, Sicong Zhao, Zhiwei Wang, Yicheng Feng, Changliang Wang, Lei Wang, Dongrong Liu, Jingfang Li

27-01-2022 | Technical Article

Influence of Different Ultraviolet Radiation Intensities on the Corrosion Behavior of Type 316 Stainless Steel in a Simulated Salt-Lake Atmospheric Environment

Mingxiao Guo, Hui Feng, Naeem ul Haq Tariq, Xiaohan Li, Junrong Tang, Chen Pan, Zhenyao Wang

29-01-2022 | Technical Article

Study on the Effect of the Grain Refinement on Mechanical Properties of the P92 Welded Joint

C. Pandey, Naveen Kumar, S. Sirohi, T. Rajasekaran, S. Kumar, P. Kumar

04-03-2022 | Correction

Correction to: Study on the Effect of the Grain Refinement on Mechanical Properties of the P92 Welded Joint

C. Pandey, Naveen Kumar, S. Sirohi, T. Rajasekaran, S. Kumar, P. Kumar

11-03-2022 | Technical Article

Evaluation of Thermal Cycling Performance of Plasma Sprayed Alumina Coating on Inconel 600 with Different Bond Coats

A. Ravi Shankar, R. P. George, John Philip

Open Access 04-01-2022 | Technical Article

The Impact of Retained Austenite on the Mechanical Properties of Bainitic and Dual Phase Steels

Bogusława Adamczyk-Cieślak, Milena Koralnik, Roman Kuziak, Kamil Majchrowicz, Tomasz Zygmunt, Jarosław Mizera

Download PDF-version View full text

11-02-2022 | Technical Article

Metallurgical and Mechanical Properties of Fibrous Laser Welded Thick Q890 High Strength Low Alloy Steel with Varying Weld Geometries

Yunxia Chen, Yanjing Liu, Chenxi Chen, Haichao Cui

10-01-2022 | Technical Article

Precipitation Behavior and Elemental Distribution of MC Carbides in High Carbon and Vanadium High-Speed Steel

Yulong Cao, Zhengrong Zhao, Chongsheng Ma, Guangqiang Li

28-01-2022 | Technical Article

Study on Corrosion Behavior of Q235 Steel in a Simulated Marine Tidal Environment

Xiaobao Zhou, Xuankai Wang, Qin Wang, Tangqing Wu, Cong Li, Jun Luo, Fucheng Yin

24-01-2022 | Technical Article

Comparative Study of Mechanical and Corrosion Behaviors of Cost-Effective AlCrFeNi High Entropy Alloys

Hao Wu, Jun Xie, Huai-Yu Yang, De-Long Shu, Gui-Chen Hou, Jin-Guo Li, Yi-Zhou Zhou, Xiao-Feng Sun

31-01-2022 | Technical Article

Fracture Behavior of Low-Pressure Sand-Cast Mg–Gd–Y Magnesium Alloy Under Different Types of Loads

Wencai Liu, Hongjie Liu, Xin Tong, Dehao Meng, Song Pang, Lv Xiao, Longkang Jiang, Guohua Wu

06-01-2022 | Technical Article

Effects of Cu and Ti Contents on Microstructure and Properties of Al-8.8Zn-2.2Mg-xCu-0.2Zr-0.1Sr-yTi Aluminum Alloy

Yuntian Luo, Yuan Zhuang, Chen Li, Xiaojing Xu

17-01-2022 | Technical Article

Internal Morphology Evolution of Mg Wire/Poly(Lactic Acid) Composites during Degradation Process Characterized by X-Ray Computed Tomography

Hong Cai, Feng Xue, Chenglin Chu, Jing Bai, Hongxing Wang, Ding Zhu, Xuan Li, Bing Han, Wentong Gao, Zusheng Hang

03-01-2022 | Technical Article

Tribological Performance of Bearing Steel with Bi-triangular and Circular Textures under Lubricated Sliding

Manish Kumar, Rajnesh Tyagi

22-02-2022 | Technical Article

Mechanical Properties and Corrosion Resistance of Cold Metal Transfer Small-Bore Thin-Walled Tube Butt Welded Joints of UNS S32205 Duplex Stainless Steel

Zhou Zhou, Wenjian Zheng, Daochen Feng, Tingting Xu, Jianguo Yang

03-02-2022 | Technical Article

New Insight on the Effect of Yttria-Based Secondary Phases on Sintering and Electrical Behavior of Aluminum Nitride Ceramics

M. Coëffe-Desvaux, T. Tabares-Medina, N. Pradeilles, P. Marchet, M. Joinet, A. Maitre

06-01-2022 | Technical Article

Assessment of 3D Printings Produced in Fused Deposition Modeling Printer Using Polylactic Acid/TiO2/Hydroxyapatite Composite Filaments

Mikail Olam, Nihat Tosun

Open Access 23-02-2022 | Technical Article

Titanium Electrical Resistivity in Hydrogen and Deuterium

A. Pozio, A. Aurora, L. Della Seta, A. Santucci, S. Tosti

Download PDF-version View full text

17-01-2022 | Technical Article

Microstructural Configuration and Impact Toughness of Graphite Ductile Iron Reinforced by Trace Amount of TiC-TiB2 Nanoparticles

Wei-Wei Cui, Bing-Xu Wang, Feng Qiu, Yu Zhang, Jing Yang, Zhaoxia Zhang, Gary C. Barber, Ming Hu

21-01-2022 | Technical Article

Investigation of the Effects of Deformation Aging Applied to AA 7075 Aluminum Alloy on Mechanical and Metallographic Properties

Yahya Taşgın, Ramazan Ergin

04-01-2022 | Technical Article

Microstructure Evolution and Properties of In Situ Micro/Nanoscale Mo2C Reinforced Copper Composite Synthesized by Hot-Pressing Consolidation of Mechanical Alloying Powders

Yu Bian, Junjie Ni

31-01-2022 | Technical Article

Comparative Capabilities of Conventional and Ultrasonic-Assisted-Electrical Discharge Machining of Nimonic Alloy 75

Maninder Singh, Shankar Singh

14-03-2022 | Technical Article

Microstructure, Mechanical Properties, and Cytotoxicity of β-Type Ti-Nb-Cr Alloys Designed by Electron Parameter

Qiang Li, Fei Li, Junjie Li, Zhi Gao, Ke Zhang, Mitsuo Niinomi, Takayoshi Nakano

08-02-2022 | Technical Article

Forming Appearance Analysis of 2205 Duplex Stainless Steel Fabricated by Cold Metal Transfer (CMT) Based Wire and Arc Additive Manufacture (WAAM) Process

Kai Qi, Ruifeng Li, Zhenxing Hu, Xiaolin Bi, Taotao Li, Hangyu Yue, Baosen Zhang

27-01-2022 | Technical Article

Effect of Pre-strain on Microstructure, Texture, and Strengthening of Fully Pearlitic Steel

Mohammad Masoumi, Rodrigo de Carvalho Paes Loureiro, Pedro Pinheiro, Jorge Luiz Cardoso, Miloslav Béreš, Hamilton Ferreira Gomes de Abreu

17-03-2022 | Technical Article

Fretting Characterization of Carbon-Fiber-Reinforced Polyetheretherketone Composites with Different Fiber Orientations

Chenglong Xue, Shouren Wang, Mingyuan Zhang, Gaoqi Wang, Xiaoyu Shi, Jinkun Li

Open Access 07-02-2022 | Technical Article

Quasi-Non-destructive Characterization of Carburized Case Depth by an Application of Centerless X-ray Diffractometers

Mate Sepsi, Peter Szobota, Valeria Mertinger

Download PDF-version View full text

31-01-2022 | Technical Article

Optimization of Electrochemical Performance for Activated Carbon and Functionalized Graphene Composite-Based Supercapacitor

Kyu Seok Lee, Hyeon Taek Jeong

31-01-2022 | Technical Article

In Situ SEM Investigation of Local Deformation and Failure Behavior of Ti6Al4V under Tensile and Shear Loading

Hao Zhang, Xunpeng Li, Lingyu Zhao, Haipeng Song, Ganyun Huang

27-01-2022 | Technical Article

Machine Learning-Based Mechanical Behavior Optimization of 3D Print Constructs Manufactured Via the FFF Process

Paschalis Charalampous, Nikolaos Kladovasilakis, Ioannis Kostavelis, Konstantinos Tsongas, Dimitrios Tzetzis, Dimitrios Tzovaras

06-01-2022 | Technical Article

Microstructure Evolution and Constitutive Analysis of Al-Mg-Si-Ce-B Alloy during Hot Deformation

Yi Yu, Qinglin Pan, Weiyi Wang, Zhiqi Huang, Shengqian Xiang, Geng Lin, Jijun Yan, Bing Liu

31-01-2022 | Technical Article

Experimental and Simulation Study on Wear Behavior of ZK60 Alloy with 3 wt.% Yttrium Addition

Seyed Masih Banijamali, Mahta Shariat Razavi, Yahya Palizdar, Soroush Najafi, Alireza Sheikhani, Hadi Torkamani

04-01-2022 | Technical Article

An Improved Prediction Model on Fatigue Crack Growth Rate under Variable Amplitude Loads for Metallic Materials

Hao Gong, Feng-Peng Yang, Te Chen

04-01-2022 | Technical Article

Modeling and Optimization of Solidification Cracking of 4043 Aluminum Alloys Produced by Cold Metal Transfer Welding

Lei Huang, Xizhang Chen, Sergey Konovalov, Mi Wang, Chuanchu Su, Lei Han, Yanhu Wang

02-03-2022 | Technical Article

Microstructure-Based MultiStage Fatigue Modeling of NiTi Alloy Fabricated via Direct Energy Deposition (DED)

Allen Bagheri, Aref Yadollahi, Mohammad J. Mahtabi, Yubraj Paudel, Ethan Vance, Nima Shamsaei, Mark F. Horstemeyer

01-02-2022 | Technical Article

A Predictive Methodology for High-Cycle Fatigue Behavior of Machined Metallic Parts

Adnen Laamouri, Habib Sidhom, Chedly Braham

03-02-2022 | Technical Article

Investigation of Ultra-High Vacuum Compatible Weld Joints of AA5083 and AA6061 Materials for Synchrotron Radiation Source

Sushil K. Sharma, Honey Gupta, Vikas K. Jain, P. Ganesh, Ram K. Gupta, Digamber P. Yadav, Rakesh Kaul

14-04-2022

Wear Behavior of Silicon-Cobalt Composite Coating Deposited on TiAl Alloy by Pack Cementation Process

Jin Tian, Conghui Zhang, Xuan Li, Sheng Lai, Wenling Xie, Wei Tian

19-01-2022 | Technical Article

CO2-O2-SRB-Cl− Multifactor Synergistic Corrosion in Shale Gas Pipelines at a Low Liquid Flow Rate

Min Qin, Guoxi He, Kexi Liao, Qing Zou, Shuai Zhao, Xinhui Jiang, Shijian Zhang

28-01-2022 | Technical Article

Tribological Performance Assessment of Porous Copper-Based Composite under Dry and Lubricated Conditions

Hemant Nautiyal, Rajnesh Tyagi, Pooja Verma, Sudesh Singh, R. S. Walia, Om P. Khatri

14-01-2022 | Technical Article

Experimental Investigation and Prediction of Mild Steel Turning Performances Using Hybrid Deep Convolutional Neural Network-Based Manta-Ray Foraging Optimizer

Thangavel Palaniappan, Prakasam Subramaniam

03-01-2022 | Technical Article

Role of Trace Dissolved Oxygen Content in Corrosion Scale of 3Cr Steel in CO2 Aqueous Environment

Longjun Chen, Wei Liu, Baojun Dong, Peng Zhang, Qinghe Zhao, Tianyi Zhang, Pengcheng Fan, Hai Li

06-01-2022 | Technical Article

Mechanical Properties and Characterization of Polylactic Acid/Carbon Fiber Composite Fabricated by Fused Deposition Modeling

K. Ravi Kumar, V. Mohanavel, K. Kiran

02-03-2022 | Technical Article

Microstructure, Mechanical Properties and Tribological Behavior of A380/Nano-Hexagonal Boron Nitride Metal Matrix Composite

Jaivir Singh, Noe Alba-Baena, Rajeev Trehan, Vishal S. Sharma

28-01-2022 | Technical Article

Probing High-Temperature Electrochemical Corrosion of 316 Stainless Steel in Molten Nitrate Salt for Concentrated Solar Power Plants

Mahander Pratap Singh, Bikramjit Basu, Kamanio Chattopadhyay

28-01-2022 | Technical Article

Effect of Hydrogen on Microstructure and Mechanical Behavior of High-Strength Bainitic Steel in Marine Application

Zhen Zhang, Anzhe Wang, Wei Zhao, Zhixin Ba, Zhengfei Hu, Shan Gao, Yuping Li

03-01-2022 | Technical Article

Wear Behavior of Hot Rolled AZ31B and AZ31B-Nd-La Mg Alloys Tested at Different Angles to Rolling Direction

İsmail Hakkı Kara

06-01-2022 | Technical Article

Microstructure and Properties of Lightweight Al2NbTixV2Zr High Entropy Alloy

Qian Zhi, Xinrong Tan, Jilin Xie, Yang Liu, Kai Yang, Qiong Zhang, Wenhui Liu, Zhongxia Liu

13-01-2022 | Technical Article

Research on Adding Nano-SiC Reinforced Wire Arc Additive Manufacturing Stainless Steel

Jin Liu, Jili Liu, Han Wang, Changlang Jiang, Wei Huang

03-03-2022 | Technical Article

Tribological Properties and Electrical Conductivity of Carbon Nanotube-Reinforced Copper Matrix Composites

Shaoli Fu, Xiaohong Chen, Ping Liu, Haipo Cui, Honglei Zhou, Fengcang Ma, Wei Li

31-01-2022 | Technical Article

Effect of Tempering Treatment on Atmospheric Corrosion Behavior of 3Cr13 Martensitic Stainless Steel in Marine Environment

Yong Lian, Jin Zhang, Pengfei Ji, Zunjun Zhang, Minyu Ma, Chao Zhao, Jinfeng Huang

18-01-2022 | Technical Article

Grain Refinement and Mechanical Property Improvements in Ultrasound-Assisted Brazing of SiCp/Al Composite Materials

Qinghe Cui, Lin Ma, Chao Zhu, Changzhuang Zhou, Yujian Song, Jindi Liang

05-04-2022

Microstructure and Microhardness of H13 and Cr8 Die Steels in Control Forging and Cooling Process

Changsheng Li, Yahui Han, En Li, Shuai He, Jinyi Ren

22-01-2022 | Technical Article

On Rheological, Thermal, Mechanical, Morphological, and Piezoelectric Properties and One-Way Programming Features of Polyvinylidene Fluoride–CaCO3 Composites

Vinay Kumar, Rupinder Singh, Inderpreet Singh Ahuja

21-01-2022 | Technical Article

Study of the Microstructure, Mechanical Properties, Residual Stresses, and Distortion in Type 316LN Stainless Steel Medium Thickness Plate Weld Joints

M. Ragavendran, M. Vasudevan, Naveed Hussain

28-01-2022 | Technical Article

Experimental Investigation on Microwave Sintered Composite Tool for Electro-Discharge Machining of Titanium Alloy

Anshuman Kumar Sahu, Siba Sankar Mahapatra, Neeraj Kumar Bhoi, Harpreet Singh, Marco Leite, Saurav Goel

04-01-2022 | Technical Article

Nanocrystallization of Mg-Y-Zn Alloy Containing Long-Period Stacking-Ordered Phase during Cold Rotary Swaging

Meng Fang, Chuming Liu, Shunong Jiang, Hongchao Xiao, Gang Zeng, Xin Chen, Yingchun Wan

06-01-2022 | Technical Article

Microstructure and Tribological Behavior of Ti2AlN MAX Phase Synthesized through Mechanical Activation–Spark Plasma Sintering Method

E. Gholami nejad, M. Farvizi, A. Habibolahzadeh

27-01-2022 | Technical Article

Phase Transformation-Induced Strain-Rate Dependence Effect in Economical Transformation-Induced Plasticity-Aided Duplex Stainless Steel

Qingxuan Ran, Xiaoru Yang, Yage Meng, Xiaojun Jiang, Rihong Han, Shaoqing Wang, Yinan Jiao, Yabin Cao, Zhihao Feng

11-01-2022 | Technical Article

Influences of Directions and Magnitudes of Static Electrical Field on Microstructure and Mechanical Properties for Al–Si Eutectic Alloy

Semih Birinci, Sercan Basit, Necmettin Maraşlı

17-01-2022 | Technical Article

Effect of Homogenization on Microstructure and Hardness of Arc-Melted FeCoNiMn High Entropy Alloy During High-Pressure Torsion (HPT)

Fatemeh Alijani, Mohsen Reihanian, Khalil Gheisari, Kaveh Edalati, Hiroyuki Miyamoto

18-01-2022 | Technical Article

Effect of the WC Composition Ratio on the Microstructure and Properties of WC-10Ni+AgCuTi Coatings

Xiangping Xu, Chi Liu, Chunzhi Xia, Yi Wang, Jiasheng Zou, Xiaoguo Song

07-02-2022 | Correction

Correction to: Effect of the WC Composition Ratio on the Microstructure and Properties of WC-10Ni+AgCuTi Coatings

Xiangping Xu, Chi Liu, Chunzhi Xia, Yi Wang, Jiasheng Zou, Xiaoguo Song

02-02-2022 | Technical Article

Embedding Quality in Extrusion-Based Additive Manufacturing Technologies

Imran Siraj, Pushpendra S. Bharti

22-04-2022 | Technical Article

Effect of Initial Microstructure and Strain Rate on the Hot Deformation Behavior of ATI425 Alloy in Two-Phase α/β Region

R. Mahdavi, E. Emadoddin, S. M. Abbasi

06-01-2022 | Technical Article

Effect of Thickness Reduction on Residual Stress and Microstructure Inhomogeneity of Radial Forged Ni-Cr-Mo High-Strength Steel Tube

Weisheng Xu, Jinghan Yang, Pengfei Ji, Yong Lian, Jin Zhang

25-01-2022 | Technical Article

Investigation of the Effect of Pressureless Microwave Sintering Parameters on the Corrosion Behavior of Pure Iron Biodegradable Scaffolds

Pawan Sharma, Dayanidhi Krishana Pathak, Pulak M. Pandey

17-01-2022 | Technical Article

Comparison of 3D Printed Underwater Propeller Using Polymers and Conventionally Developed AA6061

H. M. T. Khaleed, Irfan Anjum Badruddin, Yaser H. Alahmadi, Amin A. G. Haider, Vineet Tirth, Ali A. Rajhi, Ali Algahtani, Ali E. Anqi, Sagr Alamri, Sarfaraz Kamangar, T. M. Yunus Khan, Abou Bakr Elshalakany

24-03-2022 | Correction

Correction to: Effect of Laser Energy Density on Surface Morphology, Microstructure, and Magnetic Properties of Selective Laser Melted Fe-3wt.% Si Alloys

Shuohong Gao, Xingchen Yan, Cheng Chang, Eric Aubry, Min Liu, Hanlin Liao, Nouredine Fenineche

19-04-2022 | Correction

Correction to: Boron-Doped Hydroxyapatite Coatings on NiTi Alloys Using the Electrophoretic Deposition Method: Enhanced Corrosion and Adhesion Performances

M. E. Aksoy, B. Aksakal, N. Aslan, B. Dikici

Springer Professional

Table of Contents (78 Articles)

Simultaneous Enhancement of Strength and Toughness in a Medium-Carbon Martensitic Steel by Ti-Mo Addition

Effect of Retrogression and Re-aging Treatment on Properties and Microstructure of a New Type of Al–Zn–Mg–Er–Zr Alloy

Effects of Heat Treatment on Microstructure and Wear Behavior of Modified Aluminum Bronze Coatings Fabricated by Laser Cladding

Effect of Ferrite/Martensite on Microstructure Evolution and Mechanical Properties of Ultrafine Vanadium Dual-Phase Steel

The Effect of Cold Work and Thermal Aging on Intergranular and Transgranular Corrosion Failure of High Manganese Austenitic Stainless Steel

Nanoindentation and Tribological Behavior of TiN-TiCN-TiAlN Multilayer Coatings on AISI D3 Tool Steel

Research on Impact–Abrasion–Corrosion Behavior of Three Typical Wear-Resistant Steels under High Impact Energy

Mechanical and Tribological Response of [CoN/AlN]n Multilayers Obtained from Laser Ablation

Effect of Nd on the Microstructure and Mechanical Properties of Hot Extruded Mg-2.0Sm-0.4Zn-0.4Zr Alloy

Influence of Different Ultraviolet Radiation Intensities on the Corrosion Behavior of Type 316 Stainless Steel in a Simulated Salt-Lake Atmospheric Environment

Study on the Effect of the Grain Refinement on Mechanical Properties of the P92 Welded Joint

Correction to: Study on the Effect of the Grain Refinement on Mechanical Properties of the P92 Welded Joint

Evaluation of Thermal Cycling Performance of Plasma Sprayed Alumina Coating on Inconel 600 with Different Bond Coats

The Impact of Retained Austenite on the Mechanical Properties of Bainitic and Dual Phase Steels

Metallurgical and Mechanical Properties of Fibrous Laser Welded Thick Q890 High Strength Low Alloy Steel with Varying Weld Geometries

Precipitation Behavior and Elemental Distribution of MC Carbides in High Carbon and Vanadium High-Speed Steel

Study on Corrosion Behavior of Q235 Steel in a Simulated Marine Tidal Environment

Comparative Study of Mechanical and Corrosion Behaviors of Cost-Effective AlCrFeNi High Entropy Alloys

Fracture Behavior of Low-Pressure Sand-Cast Mg–Gd–Y Magnesium Alloy Under Different Types of Loads

Effects of Cu and Ti Contents on Microstructure and Properties of Al-8.8Zn-2.2Mg-xCu-0.2Zr-0.1Sr-yTi Aluminum Alloy

Internal Morphology Evolution of Mg Wire/Poly(Lactic Acid) Composites during Degradation Process Characterized by X-Ray Computed Tomography

Tribological Performance of Bearing Steel with Bi-triangular and Circular Textures under Lubricated Sliding

Mechanical Properties and Corrosion Resistance of Cold Metal Transfer Small-Bore Thin-Walled Tube Butt Welded Joints of UNS S32205 Duplex Stainless Steel

New Insight on the Effect of Yttria-Based Secondary Phases on Sintering and Electrical Behavior of Aluminum Nitride Ceramics

Assessment of 3D Printings Produced in Fused Deposition Modeling Printer Using Polylactic Acid/TiO2/Hydroxyapatite Composite Filaments

Titanium Electrical Resistivity in Hydrogen and Deuterium

Microstructural Configuration and Impact Toughness of Graphite Ductile Iron Reinforced by Trace Amount of TiC-TiB2 Nanoparticles

Investigation of the Effects of Deformation Aging Applied to AA 7075 Aluminum Alloy on Mechanical and Metallographic Properties

Microstructure Evolution and Properties of In Situ Micro/Nanoscale Mo2C Reinforced Copper Composite Synthesized by Hot-Pressing Consolidation of Mechanical Alloying Powders

Comparative Capabilities of Conventional and Ultrasonic-Assisted-Electrical Discharge Machining of Nimonic Alloy 75

Microstructure, Mechanical Properties, and Cytotoxicity of β-Type Ti-Nb-Cr Alloys Designed by Electron Parameter

Forming Appearance Analysis of 2205 Duplex Stainless Steel Fabricated by Cold Metal Transfer (CMT) Based Wire and Arc Additive Manufacture (WAAM) Process

Effect of Pre-strain on Microstructure, Texture, and Strengthening of Fully Pearlitic Steel

Fretting Characterization of Carbon-Fiber-Reinforced Polyetheretherketone Composites with Different Fiber Orientations

Quasi-Non-destructive Characterization of Carburized Case Depth by an Application of Centerless X-ray Diffractometers

Optimization of Electrochemical Performance for Activated Carbon and Functionalized Graphene Composite-Based Supercapacitor

In Situ SEM Investigation of Local Deformation and Failure Behavior of Ti6Al4V under Tensile and Shear Loading

Machine Learning-Based Mechanical Behavior Optimization of 3D Print Constructs Manufactured Via the FFF Process

Microstructure Evolution and Constitutive Analysis of Al-Mg-Si-Ce-B Alloy during Hot Deformation

Experimental and Simulation Study on Wear Behavior of ZK60 Alloy with 3 wt.% Yttrium Addition

An Improved Prediction Model on Fatigue Crack Growth Rate under Variable Amplitude Loads for Metallic Materials

Modeling and Optimization of Solidification Cracking of 4043 Aluminum Alloys Produced by Cold Metal Transfer Welding

Microstructure-Based MultiStage Fatigue Modeling of NiTi Alloy Fabricated via Direct Energy Deposition (DED)

A Predictive Methodology for High-Cycle Fatigue Behavior of Machined Metallic Parts

Investigation of Ultra-High Vacuum Compatible Weld Joints of AA5083 and AA6061 Materials for Synchrotron Radiation Source

Wear Behavior of Silicon-Cobalt Composite Coating Deposited on TiAl Alloy by Pack Cementation Process

CO2-O2-SRB-Cl− Multifactor Synergistic Corrosion in Shale Gas Pipelines at a Low Liquid Flow Rate

Tribological Performance Assessment of Porous Copper-Based Composite under Dry and Lubricated Conditions

Experimental Investigation and Prediction of Mild Steel Turning Performances Using Hybrid Deep Convolutional Neural Network-Based Manta-Ray Foraging Optimizer

Role of Trace Dissolved Oxygen Content in Corrosion Scale of 3Cr Steel in CO2 Aqueous Environment

Mechanical Properties and Characterization of Polylactic Acid/Carbon Fiber Composite Fabricated by Fused Deposition Modeling

Microstructure, Mechanical Properties and Tribological Behavior of A380/Nano-Hexagonal Boron Nitride Metal Matrix Composite

Probing High-Temperature Electrochemical Corrosion of 316 Stainless Steel in Molten Nitrate Salt for Concentrated Solar Power Plants

Effect of Hydrogen on Microstructure and Mechanical Behavior of High-Strength Bainitic Steel in Marine Application

Wear Behavior of Hot Rolled AZ31B and AZ31B-Nd-La Mg Alloys Tested at Different Angles to Rolling Direction

Microstructure and Properties of Lightweight Al2NbTixV2Zr High Entropy Alloy

Research on Adding Nano-SiC Reinforced Wire Arc Additive Manufacturing Stainless Steel

Tribological Properties and Electrical Conductivity of Carbon Nanotube-Reinforced Copper Matrix Composites

Effect of Tempering Treatment on Atmospheric Corrosion Behavior of 3Cr13 Martensitic Stainless Steel in Marine Environment

Grain Refinement and Mechanical Property Improvements in Ultrasound-Assisted Brazing of SiCp/Al Composite Materials

Microstructure and Microhardness of H13 and Cr8 Die Steels in Control Forging and Cooling Process

On Rheological, Thermal, Mechanical, Morphological, and Piezoelectric Properties and One-Way Programming Features of Polyvinylidene Fluoride–CaCO3 Composites

Study of the Microstructure, Mechanical Properties, Residual Stresses, and Distortion in Type 316LN Stainless Steel Medium Thickness Plate Weld Joints

Experimental Investigation on Microwave Sintered Composite Tool for Electro-Discharge Machining of Titanium Alloy

Nanocrystallization of Mg-Y-Zn Alloy Containing Long-Period Stacking-Ordered Phase during Cold Rotary Swaging

Microstructure and Tribological Behavior of Ti2AlN MAX Phase Synthesized through Mechanical Activation–Spark Plasma Sintering Method

Phase Transformation-Induced Strain-Rate Dependence Effect in Economical Transformation-Induced Plasticity-Aided Duplex Stainless Steel

Influences of Directions and Magnitudes of Static Electrical Field on Microstructure and Mechanical Properties for Al–Si Eutectic Alloy

Effect of Homogenization on Microstructure and Hardness of Arc-Melted FeCoNiMn High Entropy Alloy During High-Pressure Torsion (HPT)

Effect of the WC Composition Ratio on the Microstructure and Properties of WC-10Ni+AgCuTi Coatings

Correction to: Effect of the WC Composition Ratio on the Microstructure and Properties of WC-10Ni+AgCuTi Coatings

Embedding Quality in Extrusion-Based Additive Manufacturing Technologies

Effect of Initial Microstructure and Strain Rate on the Hot Deformation Behavior of ATI425 Alloy in Two-Phase α/β Region

Effect of Thickness Reduction on Residual Stress and Microstructure Inhomogeneity of Radial Forged Ni-Cr-Mo High-Strength Steel Tube

Investigation of the Effect of Pressureless Microwave Sintering Parameters on the Corrosion Behavior of Pure Iron Biodegradable Scaffolds

Comparison of 3D Printed Underwater Propeller Using Polymers and Conventionally Developed AA6061

Correction to: Effect of Laser Energy Density on Surface Morphology, Microstructure, and Magnetic Properties of Selective Laser Melted Fe-3wt.% Si Alloys

Correction to: Boron-Doped Hydroxyapatite Coatings on NiTi Alloys Using the Electrophoretic Deposition Method: Enhanced Corrosion and Adhesion Performances