Journal of Materials Engineering and Performance 7/2022

10-03-2022 | Review

Residual Stress and Distortion during Quench Hardening of Steels: A Review

Augustine Samuel, K. Narayan Prabhu

02-02-2022 | Technical Article

Effect of Cr3C2 Content on Microstructure and Properties of Laser Cladding Ti(C, B)/Ni Coatings

Liang Yunlong, Fu Hanguang, Xing Zhenguo, Guo Xingye, Lin Jian

31-01-2022 | Technical Article

Effect of Zn/Ga Ratio on Damping and Thermal Behaviors of Fine-Grained Mg-Zn-Ga Sheets

Jiale He, Jihua Chen, Hongge Yan, Weijun Xia, Bin Su, Pengfei Pan, Meng Zhang, Jianling Hu

02-02-2022 | Technical Article

Effect of Titanium Addition on the Neutral Corrosion Resistance of Welding Overlay

Dashuang Liu, Yucheng Wu, Weimin Long, Ping Wei, Rui Wang

16-02-2022 | Technical Article

Study on Microstructure Evolution and Strengthening and Toughening of Friction Stir Processed AA6082-4%Al3Zr In-Situ Composites

Hui Li, Yuanpeng Qiao, Shengbo Lu, Chuying Li, Feng Wang, Caizhi Sun, Lei Jiao

24-02-2022 | Technical Article

Comparative Evaluation of Self-Shielded Flux-Cored Wires Designed for High Strength Low Alloy Steel in Underwater Wet Welding: Arc Stability, Slag Characteristics, and Joints’ Quality

Qiang Ma, Hongliang Li, Shixiong Liu, Duo Liu, Pengfei Wang, Qiang Zhu, Yucheng Lei

09-02-2022 | Technical Article

Effects of Different Forms of Polytetrafluoroethylene Microparticles on Fretting Wear Resistance and Mechanical Properties of Polycarbonate/Acrylonitrile Butadiene Styrene Composites

Xiang Gao, Yuantai Liao, Jian Song, Lun Chen, Guizhen Zhang

14-02-2022 | Technical Article

Austenite Stability and Cryogenic Impact Toughness of a Lamellar Fe-Mn-Al-C Lightweight Structural Steel Subjected to Quenching and Tempering Process

Xiao-feng Zhang, Jia-xing Li, Yong Yang, Ke Zhang, Xue-jun Wu, Zhen-yi Huang

22-02-2022 | Technical Article

Effect of Oxygen Levels in Tent Shielding Atmosphere on Microstructural and Mechanical Properties of Ti-6Al-4V Fabricated by Wire Arc Additive Manufacturing

Siyu Zhou, Jianfei Zhang, Jiayin Wang, Guang Yang, Ke Wu, Lanyun Qin

22-02-2022 | Technical Article

Effect of Stress Wave Propagation on Surface Stress Relaxation in 7050 Aluminum Panel Shocked by a Nanosecond Laser

Yuqi Yang, Hongchao Qiao, Ying Lu, Jibin Zhao, Boyu Sun, Jiaqi He

28-02-2022 | Technical Article

Second-Phase Precipitates and Their Influence on Mechanical and Work Hardening Behavior of Mg-Al-Sn Alloy

P. Vignesh, G. Venkatesh, S. Kumaran

14-02-2022 | Technical Article

Experimental and Numerical Study of Resistance Spot Welding of Galvanized High-Strength Low-Alloy Steel Sheets

Miguel F. Delgado-Pamanes, Luis A. Reyes-Osorio, Miguel Á. Suárez-Rosales, José F. Chávez-Alcala, Simitrio I. Maldonado-Ruiz, Roberto Cabriales-Gómez

22-02-2022 | Technical Article

Retrogression Forming and Reaging of an AA7075-T6 Alclad Sheet Material

Katherine E. Rader, Jon T. Carter, Louis G. Hector Jr., Eric M. Taleff

04-03-2022 | Technical Article

Development of Al-Ni-TiC Composite Coating on Commercially Pure Al Using Tungsten Inert Gas Welding Route and its Wear Behavior

Anand Kumar, Anil Kumar Das

23-03-2022 | Correction

Correction to: Development of Al-Ni-TiC Composite Coating on Commercially Pure Al Using Tungsten Inert Gas Welding Route and its Wear Behavior

Anand Kumar, Anil Kumar Das

17-03-2022 | Technical Article

Fabrication of Superhydrophobic Zn-Ni Coatings on LA43M Magnesium Alloy

Zhihua Wang, Yanchao Li, Guojun Zhang

22-02-2022 | Technical Article

Effect of Boron and Carbon on the Hot Deformation Behavior of a Novel Third Generation Nickel-Based Powder Metallurgy Superalloy WZ-A3

Yuan Li, Junyi Cheng, Xiangdong Ma, Yingjie He, Jianzheng Guo

17-02-2022 | Technical Article

Microstructure Evolution of AZ91 Alloy Processed by Twin Parallel Channel Angular Extrusion Technique

M. Abdi, R. Ebrahimi

18-02-2022 | Technical Article

A Novel Series of Fe8.25CoCrNiMnNb0.1Mox Multi-Component Alloys with Excellent Combined Strength and Ductility

Guojia Zhang, Mingliang Wang, Yiping Lu, Dehua Liu, Tongmin Wang, Tingju Li

24-02-2022 | Technical Article

Analysis of Densification and Consolidation during the Solid-State Recycling of High Purity Titanium Chips

Krzysztof Topolski

31-03-2022 | Correction

Correction to: Analysis of Densification and Consolidation during the Solid-State Recycling of High Purity Titanium Chips

Krzysztof Topolski

11-03-2022 | Technical Article

Effects of Solidification under Ultrasonic Vibrations on Al11Ce3 Phase Fragmentation and Mechanical Properties of Al-10 wt.% Ce Alloy

S. El-Hadad, M. E. Moussa, M. A. Waly

11-02-2022 | Technical Article

Effects of Sc Addition and Retrogression and Re-aging on Microstructure and Mechanical Properties of Al-8Zn-2Mg-2Cu-0.15Zr Alloy

Zhiliu Hu, Zongfan Wei, Baoyu Hou, Yanjun Zhao, Xingzhi Pang, Jingrui Zhang, Lingxiao Li

07-02-2022 | Technical Article

Experimental Study and Optimization on Solution and Artificial Aging of Cold-Rolled 2024 Al Alloy Sheet

Lu Sun, Liang Chen, Yunyue Guo, Guoqun Zhao

11-02-2022 | Technical Article

Microstructural Evolution and Strengthening Behavior of High-Pressure Die-Cast High-Cu Al-Si-Cu-Mg Alloy with T5 Treatment

G. S. Peng, X. Y. Fu, Y. C. Gu, G. S. Song, S. S. Chen, Q. Q. Sun, W. D. Hua

10-02-2022 | Technical Article

Evolutions of Microstructural and Mechanical Properties of Tempered Dual-Phase Steels Influenced by Silicon Content and the Intercritical Annealing Temperature

Ashkan Nouri, Farzad Badkoobeh, Naghmeh Rabiei, Hossein Hassannejad

18-02-2022 | Technical Article

Effect of Quenching and Tempering Treatment on Microstructure and Mechanical Properties of CSS-42L Bearing Steel

Xingfu Yu, Xiangyang Shen, Shisu Wang, Yong Su, Wenzeng Zhao, Yinghua Wei

22-02-2022 | Technical Article

The Effect of Heat Treatment on Fracture Behavior in ENiCrFe-7 Weld Overlay Cladding Materials

Peiliang Guo, Hongguang Han

Open Access 14-02-2022 | Technical Article

Short Duration Heat Treatments before Aging Increase Mechanical Hysteresis of Pseudoelastic NiTi Alloy

Jacopo Romanò, Fabio Lazzari, Lorenzo Garavaglia, Simone Pittaccio

Download PDF-version View full text

23-02-2022 | Technical Article

Assessment of Heat Transfer Characteristics of Transesterified Waste Sunflower Cooking Oil Blends for Quench Hardening

Augustine Samuel, K. Narayan Prabhu

18-02-2022 | Technical Article

Comparison Between Hot Rolled and Powder Metallurgy–Hot Isostatic Pressing (PM-HIP) Processed Duplex Stainless Steel UNS S32205

T. S. Barros, P. H. R. Pecly, J. M. Pardal, A. C. Gonzaga, S. S. M. Tavares

10-02-2022 | Technical Article

Microstructure and Sliding Wear Behavior of High Chromium Cast Iron Strengthened Low Carbon Steel Composite

Guofeng Yuan, Xiaogang Wang, Xiaoyu Zhu, Peisheng Han

08-03-2022 | Technical Article

Synergistic Effect of Amino-Functionalized Multiwalled Carbon Nanotube Incorporated Polyurethane Nanocomposites for High-Performance Smart Materials Applications

Naveed Ahmed, Fatima Iftikhar, Usman Farooq, Basit Niaz, Saad Nauman, Nisar Ahmed, Muhammad Arsalan Dilbraiz, Saad Ahmed

18-03-2022 | Technical Article

Research on the Microstructure Characteristics and Mechanical Properties of Autogenous and Non-autogenous Laser Beam Welded AA2195 Joints Without Removal of Surface Oxide Layers

Ke Hu, Waqas Muneer, Zetao Ye, Dongtao Liu, Xiaohong Zhan, Yanqiu Zhao, Qiaoling Wang

Open Access 08-02-2022 | Technical Article

Influence of Gas Temperature and Heat Treatment on Microstructure and Properties of Cold Sprayed Commercially Pure Titanium

Magdi F Morks, Saden H Zahiri, Xiao-Bo Chen, Stefan Gulizia, Alejandro Vargas-Uscategui, Ivan S Cole

Download PDF-version View full text

04-02-2022 | Technical Article

Microstructure and Wear Properties of TiB2 Reinforced Fe-Based Composite Coating

Weijin Zhu, Min Kang, Joseph Ndiithi Ndumia, Jinran Lin, Fang Huang, Yin Zhang

11-03-2022 | Technical Article

Microstructure Evolution and Improved Surface Properties of Ti-6Al-3Nb-2Zr-1Mo Alloy by Laser Shot Peening

Gaoli Luo, Lingfeng Zhang, Yi Xiong, Baofeng Zhang, Xuepeng Chen, Yongli Wu, Shubo Wang, Wei Cao

14-02-2022 | Technical Article

Synthesis and Characterization of Titanium Carbide and/or Alumina Nanoparticle Reinforced Copper Matrix Composites by Spark Plasma Sintering

Fadel Shaban Hamid, Omayma Abd Elguad El-Kady, Ahmed Ramadan Shaaban Essa, Ahmed Essa Gameh El-Nikhaily, Ayman Elsayed, Walaa Abd-Elaziem

18-02-2022 | Technical Article

Influence of Annealing Temperature on the Microstructure and Hardness of TiN Coatings Deposited by High-Power Impulse Magnetron Sputtering

Anas Ghailane, El Yazid Maadane, Ayyoube Barchid, Sabah Berchane, Soukayna Badre-Eddine, Hicham Larhlimi, Christian B. Fischer, Jones Alami, Mohammed Makha

11-02-2022 | Technical Article

Effects of Al Addition on Tensile Properties and Aqueous Corrosion Behavior of Cantor Alloy

Baolin Pang, Man Wang, Tanying Liu, Xiaoli Xi

16-03-2022 | Technical Article

Investigation on the Effect of Friction Time on Microstructural Characteristics and Mechanical Properties of Linear Friction Welded Ti-6Al-4V Alloy Joints

C. Mukundhan, P. Sivaraj, Vijay Petlay, Shweta Verma, V. Balasubramanian

17-02-2022 | Technical Article

Simultaneously Improving the Corrosion Resistance and Wear Resistance of Internal Surface of Aluminum Pipe by Using Multilayer Diamond-Like Carbon-Si Coatings

Xueqian Cao, Lunlin Shang, Guang’an Zhang, Qi Ding

07-02-2022 | Technical Article

Effect of Salinity, Total Dissolved Solids, Conductivity, and pH on Corrosion Behavior of Different Microstructures Made from High-Carbon Rail Steel

Kirtiratan Godbole, K. Mondal

24-02-2022 | Technical Article

Mo Content Effect on Microstructures and Toughness of the Simulated Coarse-Grained Heat-Affected Zone of Weathering Bridge Steels

L. F. Zhang, Y. F. Wang, L. Zhang, Q. F. Wang, T. S. Wang

14-02-2022 | Technical Article

Microstructure Evolution of GH4742 Ni-Based Superalloy during Hot Forming

Heyong Qin, Qiang Tian, Wenwen Zhang, Qiang Du, Haizhu Li, Xingang Liu, Ping Yu

08-02-2022 | Technical Article

Tailoring Porosity and Microstructure of Alpha-Titanium by Combining Powder Metallurgy and Ultrasonic Impact Treatment to Control Elastic and Fatigue Properties

B. N. Mordyuk, A. I. Dekhtyar, D. G. Savvakin, N. I. Khripta

09-02-2022 | Technical Article

Characterization of a Cast Al-Cu Alloy for Automotive Cylinder Head Applications

Bernoulli Andilab, Eli Vandersluis, Payam Emadi, Comondore Ravindran, Glenn Byczynski, Ricardo Fernández-Gutiérrez

11-02-2022 | Technical Article

Development of Space Qualified High Solar Absorptance Nanostructured Black CuO Coating for Spaceborne Plasma Instruments

V. Venkataraman, R. Satheesh Thampi, J. K. Abhishek, A. N. Aneesh, Anju M. Pillai, Arjun Dey, A. Rajendra

22-02-2022 | Technical Article

Microstructural Stability and Mechanical Property of a Medium-Si 12%Cr Reduced Activation Ferritic/Martensitic Steel at High Temperatures

Sen Ge, Ben Niu, Zhenhua Wang, Qianfu Pan, Chaohong Liu, Qing Wang

18-02-2022 | Technical Article

The Influence of Nb, Zr, and Zr + Hf on the Lattice Parameters and Creep Behavior of β-Solidifying γ-TiAl Alloys

V. M. Imayev, N. Y. Parkhimovich, D. M. Trofimov, R. M. Imayev

24-02-2022 | Technical Article

An Investigation of the Parameters for Characterization and Prediction of Wear of Drum Brake Friction Material

Carlos Abílio Passos Travaglia, José Adilson de Castro, Luiz Carlos Rolim Lopes, Caroline da Silva Terra

03-02-2022 | Technical Article

Numerical Simulation of Sliding Wear in Finite Line Contact Mixed Lubrication

Jiang Zhao, Wei Sheng, Zhengminqing Li, Hong Zhang, Rupeng Zhu

08-02-2022 | Technical Article

Molecular Dynamics Simulation on Friction Properties of Textured Surfaces in Nanoscale Rolling Contacts

Rui-Ting Tong, Xiao Zhang, Tao Zhang, Jing-Tao Du, Geng Liu

17-02-2022 | Technical Article

Multiscale Simulation Based on the Generalized Method of Cells for Shape Memory Alloy Hybrid Composites

Long Zhang, Wenlin Liao, Bingbin Liu

17-02-2022 | Technical Article

Prediction Model and Control Strategy of Hardenability of Gear Steel Based on Production Data

Guoning He, Tianen Peng, Bo Jiang, Zhilin Wang, Chaolei Zhang, Yazheng Liu, Chunjing Wu

25-02-2022 | Technical Article

Investigations on Mechanical Properties of Polyamide Parts Fabricated by Selective Laser Sintering Process

Vishal Sharma, Jaiinderpreet Singh, Vishal S. Sharma, Anish Sachdeva, Munish Kumar Gupta, Sharanjit Singh

07-02-2022 | Technical Article

Microstructure, Texture, and Tensile Properties of Mg-3Li Alloy Extruded at Different Temperatures

Jun Zhao, Bingchun Jiang, Zuocai Dai, Liwei Lu

31-01-2022 | Technical Article

Study on Pre-torsional Loading Influence on Tensile Failure Mechanism of 20 Steel and QT400 under Combined Torsion–Tension Loading

Pengliang Hou, Yujie He, Hongwei Zhao, Fuyuan Wang, Lei Zheng, Jianzhong Cui

22-02-2022 | Technical Article

Binder Jetting of Hydroxyapatite/Carboxymethyl Chitosan/Polyvinylpyrrolidone/Dextrin Composite: The Role of Polymeric Adhesive and Particle Size Distribution on Printability of Powders

Fahimeh Dini, Seyed Amir Ghaffari, Jafar Javadpour, Hamid Reza Rezaie

14-02-2022 | Technical Article

Surface Friction and Wear Behavior of In Situ AlB2 Particle-Reinforced A356 Composites

Lei Jiao, Fan Li, Yutao Zhao, BaoWang Wang, XinPeng Huang, Hui Li, Tao Wu, Likun Cao

09-02-2022 | Technical Article

A Simple Approach for Coarse Particle Stress-Erosion Test with Experimental Validation

Huakun Wang, Yang Yu, Yunze Xu, Sujuan Zhang, Xiubo Li

25-01-2022 | Technical Article

Effects of Curved Microchannel Surfaces with Sn-Ag-Cu and MXene-Ti3C2 on Tribological Performance of M50 Bearing Steel in Solid–Liquid Composite Lubrication System

Feng Peng, Xiaoliang Shi, Chaohua Wu, Yawen Xue, Qipeng Huang

01-02-2022 | Technical Article

Enhanced Corrosion Phenomenon of SAPH440 Steels in 3.5wt.% NaCl Solution by Pre-strain Deformation Behavior

Shuo Weng, Jun Yu, Lihui Zhao, Jinzhi Feng, Songlin Zheng

09-02-2022 | Technical Article

Effect of Deposited Sn-Ag-Cu Solid Lubricant and Grooves on Tribological Properties of 42CrMo Steel under Grease Lubrication

Kaipeng Zhang, Xiaoliang Shi, Yawen Xue, Qipeng Huang

04-02-2022 | Technical Article

The Effect of Applied Load and Rotation Speed on Wear Characteristics of Al-Cu-Li Alloy

Guoai Li, Shijia Hao, Wenli Gao, Zheng Lu

15-02-2022 | Technical Article

Effect of Inert and Active Shielding Gases in the Corrosion Resistance of IN625 Weld Overlays

Bruno Brum Moura, Daniel Souza, Maurício de Oliveira Silva, Alice Goncalves Osorio

09-02-2022 | Technical Article

Improved Tribological Properties of Poly(methyl methacrylate) Based Composites by the Synergistic Effect of Incorporating Ultra-High Molecular Weight Polyethylene and Heat Treatment

Dapeng Gu, Shuaibing Wang, Jingchao Zhang, Ke Liu, Suwen Chen, Xiaofan Chen, Zibo Wang, Jintu Liu

09-02-2022 | Technical Article

Comparative Study of Slurry Erosion and Sliding Wear Properties of Quenched and Tempered Martensitic Steels

Jayanta Mondal, Karabi Das, Siddhartha Das

08-02-2022 | Technical Article

Friction and Abrasion Performance of Polytetrafluoroethylene/Kevlar Braided Liner Under Accelerated Life Tests

Jialun Li, Jian Liu, Sanming Du, Yongzhen Zhang

17-02-2022 | Technical Article

Effect of Nano-Clay Particles and Heat Treating on Pure and Fretting Fatigue Properties of Piston Aluminum Alloy under Stress-Controlled Cyclic Bending Loading

Mohammad Sadegh Aghareb Parast, Mohammad Azadi

22-02-2022 | Technical Article

The Effect of Homogenization Parameters on the Corrosion Rate of Mg-Al-Sn-Mn-La-Gd Alloys

İsmail Hakkı Kara, Esra Özsoy

18-02-2022 | Technical Article

Effect of SiC Content and T6 Heat Treatment on Bending Properties of Al6061/SiCp Composites: Homogenous and Graded

Yong Hu, Yuelun Leng, Tong Wu, Zhe Li, Han Wang, Maosen Wang

02-03-2022 | Technical Article

Effects of Ag Content and Hot-Rolling on Microstructure and Mechanical Properties of Zn-Cu-xAg-Zr Alloy

Hualan Jin, Wang Li, Li Chen, Yonglai Lai, Hongmin Guo, Qi Xing, Xiangjie Yang

15-02-2022 | Technical Article

Effect of Fused Filament Fabrication Process Parameters on Compressive Strength of Thermoplastic Polyurethane and Polylactic Acid Lattice Structures

Nidhi Dixit, Prashant K. Jain

22-02-2022 | Technical Article

Effect of Nb Addition on the Machinability of a Pearlitic Gray Cast Iron

Bárbara Cristina Mendanha Reis, Anderson Júnior dos Santos, Natália Fernanda Santos Pereira, Denílson José do Carmo, Geraldo Lúcio de Faria, Marcelo Araújo Câmara, Paulo Eustáquio de Faria, Alexandre Mendes Abrão

18-02-2022 | Technical Article

Tribological Properties of Aramid Fiber-Microcapsule Modified Ultra-high Molecular Weight Polyethylene Composites for Water Lubrication

Zhiwei Guo, Shengkang Dong, Zhenxiang Yang, Wu Ouyang

25-04-2022 | Correction

Correction to: Correlation between Corrosion Films and Corrosion-Related Defects Formed on 316 Stainless Steel at High Temperatures in Pressurized Water

Jiawei Wu, Yanxin Qiao, Yu Chen, Lanlan Yang, Xingzhong Cao, Shuoxue Jin

11-05-2022 | Correction

Correction to: Effect of Initial Microstructure and Strain Rate on the Hot Deformation Behavior of ATI425 Alloy in Two-Phase α/β Region

R. Mahdavi, E. Emadoddin, S. M. Abbasi

Springer Professional

Table of Contents (78 Articles)

Residual Stress and Distortion during Quench Hardening of Steels: A Review

Effect of Cr3C2 Content on Microstructure and Properties of Laser Cladding Ti(C, B)/Ni Coatings

Effect of Zn/Ga Ratio on Damping and Thermal Behaviors of Fine-Grained Mg-Zn-Ga Sheets

Effect of Titanium Addition on the Neutral Corrosion Resistance of Welding Overlay

Study on Microstructure Evolution and Strengthening and Toughening of Friction Stir Processed AA6082-4%Al3Zr In-Situ Composites

Comparative Evaluation of Self-Shielded Flux-Cored Wires Designed for High Strength Low Alloy Steel in Underwater Wet Welding: Arc Stability, Slag Characteristics, and Joints’ Quality

Effects of Different Forms of Polytetrafluoroethylene Microparticles on Fretting Wear Resistance and Mechanical Properties of Polycarbonate/Acrylonitrile Butadiene Styrene Composites

Austenite Stability and Cryogenic Impact Toughness of a Lamellar Fe-Mn-Al-C Lightweight Structural Steel Subjected to Quenching and Tempering Process

Effect of Oxygen Levels in Tent Shielding Atmosphere on Microstructural and Mechanical Properties of Ti-6Al-4V Fabricated by Wire Arc Additive Manufacturing

Effect of Stress Wave Propagation on Surface Stress Relaxation in 7050 Aluminum Panel Shocked by a Nanosecond Laser

Second-Phase Precipitates and Their Influence on Mechanical and Work Hardening Behavior of Mg-Al-Sn Alloy

Experimental and Numerical Study of Resistance Spot Welding of Galvanized High-Strength Low-Alloy Steel Sheets

Retrogression Forming and Reaging of an AA7075-T6 Alclad Sheet Material

Development of Al-Ni-TiC Composite Coating on Commercially Pure Al Using Tungsten Inert Gas Welding Route and its Wear Behavior

Correction to: Development of Al-Ni-TiC Composite Coating on Commercially Pure Al Using Tungsten Inert Gas Welding Route and its Wear Behavior

Fabrication of Superhydrophobic Zn-Ni Coatings on LA43M Magnesium Alloy

Effect of Boron and Carbon on the Hot Deformation Behavior of a Novel Third Generation Nickel-Based Powder Metallurgy Superalloy WZ-A3

Microstructure Evolution of AZ91 Alloy Processed by Twin Parallel Channel Angular Extrusion Technique

A Novel Series of Fe8.25CoCrNiMnNb0.1Mox Multi-Component Alloys with Excellent Combined Strength and Ductility

Analysis of Densification and Consolidation during the Solid-State Recycling of High Purity Titanium Chips

Correction to: Analysis of Densification and Consolidation during the Solid-State Recycling of High Purity Titanium Chips

Effects of Solidification under Ultrasonic Vibrations on Al11Ce3 Phase Fragmentation and Mechanical Properties of Al-10 wt.% Ce Alloy

Effects of Sc Addition and Retrogression and Re-aging on Microstructure and Mechanical Properties of Al-8Zn-2Mg-2Cu-0.15Zr Alloy

Experimental Study and Optimization on Solution and Artificial Aging of Cold-Rolled 2024 Al Alloy Sheet

Microstructural Evolution and Strengthening Behavior of High-Pressure Die-Cast High-Cu Al-Si-Cu-Mg Alloy with T5 Treatment

Evolutions of Microstructural and Mechanical Properties of Tempered Dual-Phase Steels Influenced by Silicon Content and the Intercritical Annealing Temperature

Effect of Quenching and Tempering Treatment on Microstructure and Mechanical Properties of CSS-42L Bearing Steel

The Effect of Heat Treatment on Fracture Behavior in ENiCrFe-7 Weld Overlay Cladding Materials

Short Duration Heat Treatments before Aging Increase Mechanical Hysteresis of Pseudoelastic NiTi Alloy

Assessment of Heat Transfer Characteristics of Transesterified Waste Sunflower Cooking Oil Blends for Quench Hardening

Comparison Between Hot Rolled and Powder Metallurgy–Hot Isostatic Pressing (PM-HIP) Processed Duplex Stainless Steel UNS S32205

Microstructure and Sliding Wear Behavior of High Chromium Cast Iron Strengthened Low Carbon Steel Composite

Synergistic Effect of Amino-Functionalized Multiwalled Carbon Nanotube Incorporated Polyurethane Nanocomposites for High-Performance Smart Materials Applications

Research on the Microstructure Characteristics and Mechanical Properties of Autogenous and Non-autogenous Laser Beam Welded AA2195 Joints Without Removal of Surface Oxide Layers

Influence of Gas Temperature and Heat Treatment on Microstructure and Properties of Cold Sprayed Commercially Pure Titanium

Microstructure and Wear Properties of TiB2 Reinforced Fe-Based Composite Coating

Microstructure Evolution and Improved Surface Properties of Ti-6Al-3Nb-2Zr-1Mo Alloy by Laser Shot Peening

Synthesis and Characterization of Titanium Carbide and/or Alumina Nanoparticle Reinforced Copper Matrix Composites by Spark Plasma Sintering

Influence of Annealing Temperature on the Microstructure and Hardness of TiN Coatings Deposited by High-Power Impulse Magnetron Sputtering

Effects of Al Addition on Tensile Properties and Aqueous Corrosion Behavior of Cantor Alloy

Investigation on the Effect of Friction Time on Microstructural Characteristics and Mechanical Properties of Linear Friction Welded Ti-6Al-4V Alloy Joints

Simultaneously Improving the Corrosion Resistance and Wear Resistance of Internal Surface of Aluminum Pipe by Using Multilayer Diamond-Like Carbon-Si Coatings

Effect of Salinity, Total Dissolved Solids, Conductivity, and pH on Corrosion Behavior of Different Microstructures Made from High-Carbon Rail Steel

Mo Content Effect on Microstructures and Toughness of the Simulated Coarse-Grained Heat-Affected Zone of Weathering Bridge Steels

Microstructure Evolution of GH4742 Ni-Based Superalloy during Hot Forming

Tailoring Porosity and Microstructure of Alpha-Titanium by Combining Powder Metallurgy and Ultrasonic Impact Treatment to Control Elastic and Fatigue Properties

Characterization of a Cast Al-Cu Alloy for Automotive Cylinder Head Applications

Development of Space Qualified High Solar Absorptance Nanostructured Black CuO Coating for Spaceborne Plasma Instruments

Microstructural Stability and Mechanical Property of a Medium-Si 12%Cr Reduced Activation Ferritic/Martensitic Steel at High Temperatures

The Influence of Nb, Zr, and Zr + Hf on the Lattice Parameters and Creep Behavior of β-Solidifying γ-TiAl Alloys

An Investigation of the Parameters for Characterization and Prediction of Wear of Drum Brake Friction Material

Numerical Simulation of Sliding Wear in Finite Line Contact Mixed Lubrication

Molecular Dynamics Simulation on Friction Properties of Textured Surfaces in Nanoscale Rolling Contacts

Multiscale Simulation Based on the Generalized Method of Cells for Shape Memory Alloy Hybrid Composites

Prediction Model and Control Strategy of Hardenability of Gear Steel Based on Production Data

Investigations on Mechanical Properties of Polyamide Parts Fabricated by Selective Laser Sintering Process

Microstructure, Texture, and Tensile Properties of Mg-3Li Alloy Extruded at Different Temperatures

Study on Pre-torsional Loading Influence on Tensile Failure Mechanism of 20 Steel and QT400 under Combined Torsion–Tension Loading

Binder Jetting of Hydroxyapatite/Carboxymethyl Chitosan/Polyvinylpyrrolidone/Dextrin Composite: The Role of Polymeric Adhesive and Particle Size Distribution on Printability of Powders

Surface Friction and Wear Behavior of In Situ AlB2 Particle-Reinforced A356 Composites

A Simple Approach for Coarse Particle Stress-Erosion Test with Experimental Validation

Effects of Curved Microchannel Surfaces with Sn-Ag-Cu and MXene-Ti3C2 on Tribological Performance of M50 Bearing Steel in Solid–Liquid Composite Lubrication System

Enhanced Corrosion Phenomenon of SAPH440 Steels in 3.5wt.% NaCl Solution by Pre-strain Deformation Behavior

Effect of Deposited Sn-Ag-Cu Solid Lubricant and Grooves on Tribological Properties of 42CrMo Steel under Grease Lubrication

The Effect of Applied Load and Rotation Speed on Wear Characteristics of Al-Cu-Li Alloy

Effect of Inert and Active Shielding Gases in the Corrosion Resistance of IN625 Weld Overlays

Improved Tribological Properties of Poly(methyl methacrylate) Based Composites by the Synergistic Effect of Incorporating Ultra-High Molecular Weight Polyethylene and Heat Treatment

Comparative Study of Slurry Erosion and Sliding Wear Properties of Quenched and Tempered Martensitic Steels

Friction and Abrasion Performance of Polytetrafluoroethylene/Kevlar Braided Liner Under Accelerated Life Tests

Effect of Nano-Clay Particles and Heat Treating on Pure and Fretting Fatigue Properties of Piston Aluminum Alloy under Stress-Controlled Cyclic Bending Loading

The Effect of Homogenization Parameters on the Corrosion Rate of Mg-Al-Sn-Mn-La-Gd Alloys

Effect of SiC Content and T6 Heat Treatment on Bending Properties of Al6061/SiCp Composites: Homogenous and Graded

Effects of Ag Content and Hot-Rolling on Microstructure and Mechanical Properties of Zn-Cu-xAg-Zr Alloy

Effect of Fused Filament Fabrication Process Parameters on Compressive Strength of Thermoplastic Polyurethane and Polylactic Acid Lattice Structures

Effect of Nb Addition on the Machinability of a Pearlitic Gray Cast Iron

Tribological Properties of Aramid Fiber-Microcapsule Modified Ultra-high Molecular Weight Polyethylene Composites for Water Lubrication

Correction to: Correlation between Corrosion Films and Corrosion-Related Defects Formed on 316 Stainless Steel at High Temperatures in Pressurized Water

Correction to: Effect of Initial Microstructure and Strain Rate on the Hot Deformation Behavior of ATI425 Alloy in Two-Phase α/β Region