Skip to main content
main-content
Top

Journal

Journal of Materials Engineering and Performance

Journal of Materials Engineering and Performance 9/2018

Issue 9/2018

Table of Contents ( 61 Articles )

01-08-2018 | Issue 9/2018

Effects of Nb on the Microstructure and Properties of Ti-Added Hypereutectic High-Cr Cast Iron

J. P. Lai, Q. L. Pan, X. D. Wang, H. R. Cui, Y. W. Sun

31-07-2018 | Issue 9/2018

Effect of Deep Cryogenic Treatment on Mechanical Properties and Microstructure of the Tool Steel CR7V for Hot Stamping

Yi Liu, Jianping Lin, Junying Min, Zhijun Ma, Binbin Wu

10-08-2018 | Issue 9/2018

Investigation on Microstructural Evolutions and Mechanical Properties of P92 Steel During Thermal Processing

Jichao Wang, Pulin Nie, Shangfei Qiao, O. A. Ojo, Chengwu Yao, Zhuguo Li, Jian Huang

17-08-2018 | Issue 9/2018

Effect of Heat Treatment and Combination of Cold Rolling and Heat Treatment on Microstructure and Mechanical Properties of Titanium Alloy Ti6Al2V2Zr1.5Mo

R. K. Gupta, V. Anil Kumar, Rishi Gaur, Bhavanish Kumar Singh

27-08-2018 | Issue 9/2018

Effect of Heat Treatment Conditions on Mechanical Properties and Precipitates in Sheet Metal Hot Stamping of 7075 Aluminum Alloy

Qi Liu, Shichao Chen, Ruiying Gu, Wurong Wang, Xicheng Wei

27-08-2018 | Issue 9/2018

Microstructure and Mechanical Properties of Spray-Formed 7075 Alloy During Retrogression

Rongde Li, Tong Liu, Ruiming Su, Yingdong Qu

14-08-2018 | Issue 9/2018

Novel Fabrication of a TiB2 Grain Refiner and its Effect on Reducing Hot Tearing in AZ91D Magnesium Alloy

T. A. Davis, L. Bichler

27-07-2018 | Issue 9/2018

Impact of Nanofillers Incorporation on Laminated Nanocomposites Performance

Abdel-Hamid Ismail Mourad, Nizar Zaaroura

24-07-2018 | Issue 9/2018

Improving Corrosion Resistance and Corrosive Wear Resistance of Aluminum Alloy Drill Pipe by Surface Nanocrystallization and Micro-arc Oxidation

Jian Liang, Wen Yue, Yanhong Gu, Junxiu Liu, Chengbiao Wang, Huijuan Ma

27-07-2018 | Issue 9/2018

Influence of Braking Conditions on Tribological Performance of Copper-Based Powder Metallurgical Braking Material

Xin Zhang, Yongzhen Zhang, Sanming Du, Tiantian He, Zhenghai Yang

01-08-2018 | Issue 9/2018

Understanding the Effect of Tungsten on Corrosion Behavior of AlCuCrFeMnWx High-Entropy Alloys in 3.5 wt.% NaCl Solution

Devesh Kumar, Ornov Maulik, V. K. Sharma, Y. V. S. S. Prasad, Vinod Kumar

01-08-2018 | Issue 9/2018

Corrosion Behavior of Q235 Steel Exposed in Deepwater of South China Sea

Kangkang Ding, Weimin Guo, Ri Qiu, Jian Hou, Lin Fan, Likun Xu

07-08-2018 | Issue 9/2018

Comparative Atmospheric Corrosion Behavior of a Mild Steel and an Interstitial Free Steel

Pratik Murkute, Ravi Kumar, S. Choudhary, H. S. Maharana, J. Ramkumar, K. Mondal

01-08-2018 | Issue 9/2018

Microstructure and Electrochemical Performance of CeMg12/Ni/TiF3 Composites for Hydrogen Storage

Feng Hu, Yongzhi Li, Jianyi Xu, Yanghuan Zhang

01-08-2018 | Issue 9/2018

Effect of Plane Strain Compression and Subsequent Recrystallization Annealing on Microstructures and Phase Transformation of NiTiFe Shape Memory Alloy

Yulong Liang, Shuyong Jiang, Yanqiu Zhang, Chengzhi Zhao

27-07-2018 | Issue 9/2018

Influence of Oxygen Partial Pressure Variation on Oxidation Resistance of Ti-46.7Al-1.9W-0.5Si at 750, 850 and 950 °C

H. L. Du, T. Dudziak

10-08-2018 | Issue 9/2018

Influence of Thermomechanically Controlled Processing on Microstructure and Hydrogen Induced Cracking Susceptibility of API 5L X70 Pipeline Steel

Enyinnaya Ohaeri, Joseph Omale, Ahmed Tiamiyu, K. M. Mostafijur Rahman, Jerzy Szpunar

10-08-2018 | Issue 9/2018

The Influence of Galvanizing Parameters on the Structural Development of Zn-Al-Based Coatings

E. L. Tiron, A. Crisan, T. Bedő, M. Stoicanescu, M. A. Pop, D. Cristea

09-08-2018 | Issue 9/2018

Corrosion Behavior of Wire Electrical Discharge Machined Surfaces of P91 Steel

S. Bhattacharya, Geogy J. Abraham, Abhishek Mishra, Vivekanand Kain, G. K. Dey

10-08-2018 | Issue 9/2018 Open Access

Residual Stresses in Explosively Welded Plates Made of Titanium Grade 12 and Steel with Interlayer

A. Karolczuk, H. Paul, Z. Szulc, K. Kluger, M. Najwer, G. Kwiatkowski

27-08-2018 | Issue 9/2018

Microstructure and Ratcheting Behavior of Additive Manufactured 4043 Aluminum Alloy

Yuan Wang, Shanglei Yang, Chaojie Xie, Haobo Liu, Qi Zhang

13-08-2018 | Issue 9/2018 Open Access

Microstructure Analysis and Rheological Behavior of Magnesium Alloys at Semi-solid Temperature Range

Marta Ślęzak, Piotr Bobrowski, Łukasz Rogal

14-08-2018 | Issue 9/2018

Optimization of Hot Deformation Parameters and Constitutive Analysis for As-Cast Mg-5Li-3Zn-0.3Y Alloy Using Processing Maps

Yucheng Zhou, Zhaoyun Chen, Jinqhan Ji, Zhijie Sun

24-08-2018 | Issue 9/2018

Experimental Study on the Hot Deformation Characterization of Low-Carbon Nb-V-Ti Microalloyed Steel

Wenfei Shen, Chi Zhang, Liwen Zhang, Qianhong Xu, Yan Cui

27-08-2018 | Issue 9/2018

Synthesis and Characterization of Zeolites for Anti-corrosion Application: The Effect of Precursor and Hydrothermal Treatment

L. Rassouli, R. Naderi, M. Mahdavian, A. M. Arabi

24-08-2018 | Issue 9/2018

Thermal Wear Sensing System: Proof of the Concept

M. M. Sakka, A. Bahri, Z. Antar, K. Elleuch, P. Ponthiaux, D. Drees, J. P. Celis

14-08-2018 | Issue 9/2018

Tribological Behavior and Wear Mechanism of TZ20 Titanium Alloy After Various Treatments

S. X. Liang, L. X. Yin, L. Y. Zheng, H. L. Xie, J. X. Yao, M. Z. Ma, R. P. Liu

17-08-2018 | Issue 9/2018

Influence of Laser Nitriding on the Surface and Corrosion Properties of Ti-20Nb-13Zr Alloy in Artificial Saliva for Dental Applications

Mohamed A. Hussein, Bekir Yilbas, A. Madhan Kumar, Robin Drew, Nasser Al-Aqeeli

13-08-2018 | Issue 9/2018

Microstructure and Friction-Wear Behavior of Multi-arc Ion Plating TiAlNC Ceramic Coating on WC-6%Co Substrate

Wangping Wu, Jianwen Liu, Tongshu Hua, Zhou Chen, Jinjin Jiang, Hui Wang, Lin Liu, Xuedong Liu

20-08-2018 | Issue 9/2018

Contradictory Feature Size Effects in the Tensile Yield Strength of Cu Sheets Produced Using Different Sequences Involving Annealing, Rolling, and Grinding

Jiuming Lv, Xiaofei Zhan, Xinping Zhang, Xuehua Dong

20-08-2018 | Issue 9/2018

Facile and Green Preparation of Three-Dimensionally Nanoporous Copper Films by Low-Current Electrical Field-Induced Assembly of Copper Nanoparticles for Lithium-Ion Battery Applications

Lehao Liu, Meicheng Li, Jing Lyu, Tingkai Zhao, Tiehu Li

20-08-2018 | Issue 9/2018

Texture Effect on Fatigue Crack Propagation Behavior in Annealed Sheets of an Al-Cu-Mg Alloy

Peng Xia, Zhiyi Liu, Wenting Wu, Qi Zhao, Puyou Ying, Song Bai

13-08-2018 | Issue 9/2018

Effect of Laser Shock Peening on Residual Stress, Microstructure and Hot Corrosion Behavior of Damage-Tolerant TC21 Titanium Alloy

Yongxiang Geng, Xuesong Mei, Kedian Wang, Xia Dong, Xin Yan, Zhengjie Fan, Wenqiang Duan, Wenjun Wang

09-08-2018 | Issue 9/2018

Nano-Deformation Behavior of a Thermally Aged Duplex Stainless Steel Investigated by Nanoindentation, FIB and TEM

Gang Liu, Yanli Wang, Shilei Li, Xitao Wang

27-08-2018 | Issue 9/2018

Microstructure and Electromagnetic Shielding Properties of Mg-Zn-Ce-Y-Zr Alloys

Lizi Liu, Xianhua Chen, Hui Wang, Fusheng Pan, Jingfeng Wang

09-08-2018 | Issue 9/2018

Microstructural Analysis and Texture Evolution of the CVCEDed AZ31 Magnesium Alloy by Hot Rolling

Xu Bo Li, Feng Li, Xue Wen Li

31-07-2018 | Issue 9/2018

Structural Evolution in Mechanically Alloyed and Spark Plasma Sintered Iron–0.15 wt.% MWCNT Composite

Priyanka Sharma, Akshay Kumar, M. K. Banerjee

27-07-2018 | Issue 9/2018

Effect of Final Cooling Temperature on Microstructure and Mechanical Properties of a Cr-Ni-Mo-V Bainite Steel

Jian Zhang, Chang-Sheng Li, Bin-Zhou Li, Zhen-Xing Li, Qi-Wen Wang

24-07-2018 | Issue 9/2018

Pulse MIG Welding of 6061-T6/A356-T6 Aluminum Alloy Dissimilar T-joint

Peng Li, Fuheng Nie, Honggang Dong, Shuai Li, Guoshun Yang, Hai Zhang

24-07-2018 | Issue 9/2018

Dynamic Recrystallization and Grain Refinement of Fe-P-C-Si and Fe-P-C-Si-N Steels

Yashwant Mehta, S. K. Rajput, G. P. Chaudhari, Vikram V. Dabhade

02-08-2018 | Issue 9/2018

Microstructure and Mechanical Properties of Al-Mg-Sc-Zr Alloy Variable Polarity Plasma Arc Welding Joint

Pian Xu, Feng Jiang, Song Meng, Keke Yi, Jingyu Jiang, Qinxuan Cao, Yongyi Peng

27-08-2018 | Issue 9/2018

Hot Deformation Behavior of the 20 vol.% TiC/Cu-Al2O3 Composites

Yong Liu, Zhiqiang Yang, Baohong Tian, Yi Zhang, Zhengbin Gu, Alex A. Volinsky

20-08-2018 | Issue 9/2018

Surface Modification of 304 Stainless Steel by Electro-Spark Deposition

Z. Jiao, S. Peterkin, L. Felix, R. Liang, J. P. Oliveira, N. Schell, N. Scotchmer, E. Toyserkani, Y. Zhou

27-08-2018 | Issue 9/2018

Surface Integrity Analysis of Ti6Al4V After Semi-finishing Turning Under Different Low-Temperature Cooling Strategies

S. Sartori, L. Pezzato, M. Dabalà, T. Maurizi Enrici, A. Mertens, A. Ghiotti, S. Bruschi

31-07-2018 | Issue 9/2018

Enhancing Formability of AA2219 Aluminum Alloy Friction Stir Welded Blanks with Preheating Treatment

Wei Liu, Wangjun Cheng, Yongchao Xu, Shijian Yuan

09-08-2018 | Issue 9/2018

Research on Resistance Heating Behavior of High-Strength Steel and its Hot-Stamping Forming

Hui Fang, Guofeng Wang, Siyu Liu, Xiao Li

20-08-2018 | Issue 9/2018

Effect of Tool Temperature on Microstructure and Properties of Tailored Hot Stamping Components

Zhiqiang Zhang, Jianhao Yu, Songfeng Meng, Yong Zhao, Dongye He

17-08-2018 | Issue 9/2018

Sagging Mechanisms of Three-Layer Aluminum Clad Foils used in the Heat Exchanger in the Brazing Process

Chao-lan Tang, Qiu-ping Xu, Xiao-feng Guo, Xin Chen, Can-wei Liu, Long Li, De-jing Zhou

24-08-2018 | Issue 9/2018

Mechanism of Decrease in Impact Toughness in a Low-Carbon MnCrMoNiCu Plate Steel with Increasing Austenitizing Temperature

Mi Luo, Dongsheng Liu, Binggui Cheng, Rui Cao, Jianhong Chen

09-08-2018 | Issue 9/2018

Effect of Rolling Temperature on Fracture Properties of INRAFMS at Different Temperatures

M. Nani Babu, Atul Prajapati, G. Sasikala, S. K. Albert, C. R. Das, Thomas Paul

02-08-2018 | Issue 9/2018 Open Access

Fatigue and Fracture Behavior of Induction-Hardened and Superimposed Mechanically Post-treated Steel Surface Layers

Martin Leitner, Florian Grün, Zafer Tuncali, Wei Chen

13-08-2018 | Issue 9/2018

A Simplified Procedure to Determine Post-necking True Stress–Strain Curve from Uniaxial Tensile Test of Round Metallic Specimen Using DIC

Surajit Kumar Paul, Satish Roy, S. Sivaprasad, S. Tarafder

13-08-2018 | Issue 9/2018

Deformation Behavior of AM30 Magnesium Alloy

A. Bisht, V. Yadav, S. Suwas, U. S. Dixit

27-08-2018 | Issue 9/2018

Effect of Tempered Martensite and Ferrite/Bainite on Corrosion Behavior of Low Alloy Steel Used for Flexible Pipe Exposed to High-Temperature Brine Environment

Dazheng Zhang, Xiuhua Gao, Guanqiao Su, Zhenguang Liu, Ningning Yang, Linxiu Du, R. D. K. Misra

20-08-2018 | Issue 9/2018

Variation of the Corrosion Behavior Prior to Crack Initiation of E690 Steel Fatigued in Simulated Seawater with Various Cyclic Stress Levels

Tianliang Zhao, Zhiyong Liu, Liu Chao, Chunduo Dai, Cuiwei Du, Xiaogang Li

06-08-2018 | Issue 9/2018

Physics-based Constitutive Model for the Hot Deformation of 2Cr11Mo1VNbN Martensitic Stainless Steel

Rui Wang, Menghan Wang, Zhi Li, Cheng Lu

13-08-2018 | Issue 9/2018

High-Temperature Deformation Behavior of Ti-6Al-2Sn-4Zr-2Mo Alloy with Lamellar Microstructure Under Plane-Strain Compression

Yu Xiao, Huiqun Liu, Danqing Yi, Jianwen Le, Hangwei Zhou, Yong Jiang, Xiaolong Zhao, Zhanqian Chen, Jian Wang, Qi Gao

24-08-2018 | Issue 9/2018

Cellular Automaton Modeling of Dynamic Recrystallization of Nimonic 80A Superalloy Based on Inhomogeneous Distribution of Dislocations Inside Grains

Qianhong Xu, Chi Zhang, Liwen Zhang, Wenfei Shen, Qing Yang

16-08-2018 | Issue 9/2018

Effect of Coherent Lattice Mismatch on the Morphology and Kinetics of Ordered Precipitates

Chengwei Liu, Yongsheng Li, Lihui Zhu, Shujing Shi

01-08-2018 | Correction | Issue 9/2018

Correction to: Effect of Sintering Temperature on Density and Mechanical Properties of Solid-State Sintered Silicon Carbide Ceramics and Evaluation of Failure Origin

Dulal Chandra Jana, Prasenjit Barick, Bhaskar Prasad Saha

26-07-2018 | Correction | Issue 9/2018

Correction to: On the Effects of the Rejuvenation Treatment on Mechanical and Microstructural Properties of IN-738 Superalloy

Cosimo Monti, Alessandro Giorgetti, Leonardo Tognarelli, Francesco Mastromatteo

Current Publications

Premium Partner

    Image Credits