Issue 16-17/2004
Special Section: Mechanochemistry and Mechanical Alloying 2003 (Guest Editors: V. Sepelák, K. D. Becker and Zuhair A. Munir)
Content (134 Articles)
Contents by Keyword
Finite size effect in spinodal decomposition of nanograined materials
Yu. N. Gornostyrev, I. K. Razumov, A. Ye. Yermakov
Phase transformations in nanocrystalline alloys synthesized by mechanical alloying
C. Bansal, S. Sarkar
Dispersed materials for rechargeable lithium batteries: Reactive and non-reactive grinding
N. Kosova, E. Devyatkina, D. Osintsev
Microalloying of molybdenum disilicide with magnesium through mechanical and field activation
J. N. Woolman, J. J. Petrovic, Z. A. Munir
The magnetic behaviour of nanostructured zinc ferrite
M. Hofmann, S. J. Campbell, H. Ehrhardt, R. Feyerherm
Glass-forming ability determined from inter-atomic potentials for some miscible/immiscible binary metal systems
B. X. Liu, H. R. Gong, H. B. Guo, L. T. Kong
Mechanical alloying in binary Fe-M (M = C, B, Al, Si, Ge, Sn) systems
E. P. Yelsukov, G. A. Dorofeev
Mechanically activated synthesis of ultrafine rods of HfB2 and milling induced phase transformation of monocrystalline anatase particles
S. Bégin-Colin, G. Le Caër, E. Barraud, O. Humbert
Mechanochemical reductive dehalogenation of hazardous polyhalogenated contaminants
V. Birke, J. Mattik, D. Runne
A quantitative approach to mechanochemical processes
F. Delogu, C. Deidda, G. Mulas, L. Schiffini, G. Cocco
Amorphous solid electrolytes in the system Li2S-Al2S3-SiS2 prepared by mechanical milling
Akitoshi Hayashi, Takahiro Fukuda, Hideyuki Morimoto, Tsutomu Minami, Masahiro Tatsumisago
Modelling accelerated solid-state diffusion under the action of intensive plastic deformation
B. B. Khina, I. Solpan, G. F. Lovshenko
Friction mode and shock mode effect on magnetic properties of mechanically alloyed Fe-based nanocrystalline materials
R. Hamzaoui, O. Elkedim, E. Gaffet
Comparison of Fe-Ni based alloys prepared by ball milling and rapid solidification
J. J. Suñol, A. González, L. Escoda
Characterization of nanocrystalline Mn-Zn ferrites obtained by mechanosynthesis
T. Verdier, V. Nivoix, M. Jean, B. Hannoyer
Synthesis of nanocrystalline/quasicrystalline Mg32(Al,Zn)49 by melt spinning and mechanical milling
N. K. Mukhopadhyay, Jatin Bhatt, A. K. Pramanick, B. S. Murty, P. Paufler
Factors influencing the kinetics of electrochemical reactions in milling
V. Varghese, K. Chattopadhyay, A. Narayanasamy
Mechanochemically activated aluminium: Preparation, structure, and chemical properties
A. N. Streletskii, I. V. Kolbanev, A. B. Borunova, P. Yu. Butyagin
Features of the procedures to obtain ultrafine zirconium dioxide by mechanochemical method
E. G. Avvakumov, L. G. Karakchiev
Influence of milling conditions on the segregation-induced instability of Pd3Zr
M. Kis-Varga, D. L. Beke, A. Csik
Influence of the mechanical treatment on the structure and the thermal stability of alkaline-earth carbonates
J. M. Criado, M. J. Diánez, J. Morales
Mechanochemical effects on the kinetics of zinc titanate formation
P. M. Botta, E. F. Aglietti, J. M. Porto López
Phase formation study of PZT nanopowder by mechanical activation method at various conditions
A. Beitollahi, M. Moravej
The effect of ultrasound treatment on the particle-size of Wyoming bentonite in aqueous suspensions
Isaak Lapides, Shmuel Yariv
Mechanically driven decomposition of intermetallics
Young-Soon Kwon, Ji-Soon Kim, Dong-Wook Choi, K. B. Gerasimov, S. S. Avramchuck
Planetary mills of periodic and continuous action
E. L. Fokina, N. I. Budim, V. G. Kochnev, G. G. Chernik
Production of sub-micron particles by wet comminution in stirred media mills
S. Mende, F. Stenger, W. Peukert, J. Schwedes
Role of mechanical activation in SHS synthesis of TiC
F. Maglia, U. Anselmi-Tamburini, C. Deidda, F. Delogu, G. Cocco, Z. A. Munir
Formation of metal matrix composite by magnetic pulsed compaction of partially oxidized Al nanopowder
V. V. Ivanov, S. V. Zajats, A. I. Medvedev, A. K. Shtol'ts, I. A. Pereturina, C. K. Rhee, G. H. Lee
Microstructural and chemical properties of AlN-Cu nanocomposite powders prepared by planetary ball milling
Kwang-Min Lee, T. Weissgärber, B. Kieback
The influence of grinding conditions on the mechanochemical synthesis of zinc stannate
N. Nikolic, Z. Marinkovic, T. Sreckovic
Hydrogen storage properties of Mg-based mixtures elaborated by reactive mechanical grinding
J.-L. Bobet, B. Chevalier
Hydriding processes of Mg and Zr alloys by reactive milling
G. Mulas, L. Schiffini, G. Tanda, G. Cocco
Hard magnetic nanocrystalline alloys of Fe-O system
Yu. D. Yagodkin, A. S. Lileev, E. N. Grishina, M. Reissner, W. Steiner
Mechanism and kinetics of mechanically induced transformation of titanium and titanium hydride: Effect of reaction medium on microstructure, morphology and hydrogen-uptake properties
Ch. Borchers, A. V. Leonov, T. I. Khomenko, O. S. Morozova
The behaviour of highly over-stoichiometric LaNi5 Mn2 alloy as negative electrode for Ni/MH batteries
F. Cuevas, A. Miard, A. Percheron-Guégan
The B-site order-disorder transformation in Pb(Sc1/2Ta1/2)O3 triggered by mechanical activation
Gao Xingsen, Junmin Xue, John Wang
Mechanical alloying of copper with niobium and molybdenum
E. Botcharova, J. Freudenberger, L. Schultz
Dielectric and piezoelectric properties of the mechanochemically prepared PZT ceramics
Z. Branković, G. Branković, F. Moura Filho, J. A. Varela
Synthesis and thermal stability of ball-milled and melt-quenched amorphous and nanostructured Al-Ni-Nd-Co alloys
M. Calin, H. Grahl, M. Adam, J. Eckert, L. Schultz
Mechanochemical activation assisted synthesis of bismuth layered-perovskite SrBi4Ti4O15
P. Ferrer, J. E. Iglesias, A. Castro
In situ characterisation of mechanically-induced self-propagating reactions
C. Deidda, F. Delogu, G. Cocco
Mechanically induced self-propagating combustions: Experimental findings and numerical simulation results
G. Manai, F. Delogu, L. Schiffini, G. Cocco
Microstructure changes in TiB2-Cu nanocomposite under sintering
Y.-S. Kwon, D. V. Dudina, M. A. Korchagin, O. I. Lomovsky
Unconventional synthesis of Mg x C y Ni3: Synergic combination of mechanical alloying, SHS and isothermal heating
M. Ferretti, G. Bruzzone, E. Magnone, S. Rubino, C. Bernini, A. Martinelli
Influence of mechanochemical pretreatment on leaching of silver in cyanide and non-cyanide medium
J. Ficeriová, P. Baláž, E. Boldižárová
Comparative study of ground and sonicated vermiculite
Luis A. Pérez-Maqueda, María C. Jiménez de Haro, Juan Poyato, José Luis Pérez-Rodríguez
Mechanochemical reduction of lead sulphide by elemental iron
E. Godočí Ková, P. Baláž, E. Boldižárová, I. Škorvánek, J. Kováč, W. Choi
The solubility of nanocrystalline mechanocomposites with biologically active substances in the aqueous medium
I. Vorsina, V. Tarasova, A. Barinova, N. Lyakhov
Mechanochemical synthesis of SnO-B2O3 glassy anode materials for rechargeable lithium batteries
A. Hayashi, M. Nakai, H. Morimoto, T. Minami, M. Tatsumisago
Formation of textures and microstructures in asymmetrically cold rolled and subsequently annealed aluminum alloy 1100 sheets
Jong-Kook Kim, Young-Kyu Jee, Moo-Young Huh, Hyo-Tae Jeong
Evolution of strain states and textures during roll-cladding in STS/Al/STS sheets
Jong-Kook Kim, Moo-Young Huh, Jae-Chul Lee, Kwang-Koo Jee, Olaf Engler
Mechanochemically assisted synthesis of FeVO4 catalysts
D. Klissurski, R. Iordanova, D. Radev, St. Kassabov, M. Milanova, K. Chakarova
Structure and magnetic properties of mechanically synthesized nanocrystalline Co52Fe26Ni22 alloy
E. Jartych, D. Oleszak, M. Pe¸kała, J. Sarzyński, M. Budzyński
Mechanochemical interaction of Ca silicate and aluminosilicate minerals with carbon dioxide
A. M. Kalinkin, E. V. Kalinkina, A. A. Politov, V. N. Makarov, V. V. Boldyrev
Structure and mechanical properties of mechanically alloyed Al/Al-Cu-Fe composites
S. D. Kaloshkin, V. V. Tcherdyntsev, A. I. Laptev, A. A. Stepashkin, E. A. Afonina, A. L. Pomadchik, V. I. Bugakov
Mechanochemical synthesis of B82 phases by ball-milling of Fe60 − x Co x Ge40 mixtures
L. M. Kubalova, V. I. Fadeeva, I. A. Sviridov, A. Ye. Bogdanov
On the analysis of mechanism of supersaturation of metal powders with interstitial impurities during mechanical activation
L. S. Vasil'ev, S. F. Lomayeva
Nanosized mechanocomposites and solid solution in immiscible metal systems
N. Lyakhov, T. Grigorieva, A. Barinova, S. Lomayeva, E. Yelsukov, A. Ulyanov
Processing of nanocrystalline FeAlX (X = Ni, Mn) intermetallics using a mechanical alloying and hot pressing techniques
W. Maziarz, J. Dutkiewicz, J. Senderski
Synthesis and piezoelectric properties of nanocrystalline PZT-based ceramics prepared by high energy ball milling process
C. Miclea, C. Tanasoiu, A. Gheorghiu, C. F. Miclea, V. Tanasoiu
On the mechanism of mechanochemical synthesis of phthalylsulphathiazole
M. A. Mikhailenko, T. P. Shakhtshneider, V. V. Boldyrev
Synthesis and characterisation of nanostructured FeCo alloys
H. Moumeni, S. Alleg, C. Djebbari, F. Z. Bentayeb, J. M. Grenèche
Effect of the ball mass to sample mass relation in the magnetic and structural properties of Fe0.6Mn0.1Al0.3 alloys prepared by mechanical alloying
J. F. Valderruten, G. A. Pérez Alcázar, L. Civale
Mechanochemically activated nano-aluminium: Oxidation behaviour
A. Pivkina, A. Streletskii, I. Kolbanev, P. Ul'yanova, Yu. Frolov, P. Butyagin, J. Schoonman
Influence of inorganic soil components and humic substances on the mechanochemical removal of pentachlorophenol
M. D. R. Pizzigallo, A. Napola, M. Spagnuolo, P. Ruggiero
Mechanical alloying of Fe-transition metal systems: The analysis of different stages
I. V. Povstugar, P. Yu. Butyagin
Reactivity of mechanical activated coals for special utilization
L'. Turčániová, J. Kádárová, P. Imrich, T. Liptaj, J. Vidlář, J. Vašek, F. Foldyna, J. Sitek, P. Baláž
Thermal stability and phase formation of mechanically alloyed Ti-Al-Si-C powders
K. P. Rao, J. B. Zhou
Formation of quasicrystals in ball-milled amorphous Zr-Ti-Nb-Cu-Ni-Al alloys with different Nb content
S. Scudino, U. Kühn, L. Schultz, H. Breitzke, K. Lüders, J. Eckert
Mechanochemical reaction at the interface between a metal plate and oxide powders
A. Torosyan, L. Takacs
RE-oxide doped alkaline hydrogen storage materials prepared by mechanical activation
N. Okada, R. Genma, Y. Nishi, H.-H. Uchida
Synthesis of boron-rich solids of light metals in mechanochemical reactors
F. Kh. Urakaev, V. S. Shevchenko
Microstructure and mechanical properties of NiAl produced in the SHS process induced by low-temperature hydrostatic extrusion
Z. Witczak, P. Witczak, R. Jemielniak, A. Mazur
Mechanochemical synthesis and reactivity of La1 − x Sr x FeO3 − y perovskites (0 ≤ x ≤ 1)
I. S. Yakovleva, L. A. Isupova, S. V. Tsybulya, A. V. Chernysh, N. N. Boldyreva, G. M. Alikina, V. A. Sadykov
The structural and magnetic properties of Fe-Si and Fe-C solid solutions as a function of milling times
Yong-Goo Yoo, Seong-Cho Yu, J. M. Greneche
Dependency of mechanochemical reactions forming complex oxides on the crystal structures of starting oxides
Qiwu Zhang, Jinfeng Lu, Jun Wang, F. Saito
Effect of CH4 partial pressure on the microstructure and mechanical properties of magnetron sputtered TiC films
Nan Shao, Lan Feng, Fanghua Mei, Geyang Li
Kinetics of cellular precipitation in a 24Cr-15Ni-4Mn-0.03C-0.35N steel
M. E. Rodriguez-Castillo, V. M. Lopez-Hirata, M. L. Saucedo-Muñoz, H. J. Dorantes-Rosales
Cross-linkage of hydroxyapatite/gelatin nanocomposite using EGDE
Myung Chul Chang, T. Ikoma, J. Tanaka
Crystallization kinetics analysis of poly(trimethylene terephthalate) including the secondary crystallization process
Yong Xu, Sheng-Rong Ye, Jie Bian, Jin-Wen Qian
Preparation of high-quality ß-SiC nanowhiskers by using carbon fibres as carbon source
Y. J. Wu, W. Qin, Z. X. Yang, J. S. Wu, Y. F. Zhang
Effect of compact density on the fabrication of in situ Mg-TiC composites
Q. F. Guan, H. Y. Wang, X. L. Li, Q. C. Jiang
Synthesis of amorphous calcium phosphates for hard tissue repair using conventional melting technique
Racquel Z. Legeros, Yong-Keun Lee
Anti-Stokes photoluminescence in TiO2 nano-particle films at room temperature
Chunxia Wang, Qi Li, Guiguang Xiong
Characterization of the brazed joint interface between Al2O3 and (Ag-Cu-Ti)
S. Mandal, V. Rao, A. K. Ray
Phase changes of newly synthesized Co-coated Ni cathode in MCFC cathodic conditions
H. S. Lee, M. Z. Hong, E. J. Park, K. Kim
Preparation of composite carbon-zeolite membranes using a simple method
Xiongfu Zhang, Tonghua Wang, Haiou Liu, King Lun Yeung
Preparation and tensile property of a high-strength, anticorrosion functionally graded 2024/3003 composite
Yuan-Yuan Li, Wei-Wen Zhang, Wei-Ping Chen, Jin Fei, Ngai-Tungwai Leo
In situ synthesis of Zn x Cd1−x S nanorod by a hydrothermal route
Qiulin Nie, Qiuli Yuan, Qingsheng Wang, Zhude Xu
Preparation of hydrophobic thin films based on PTFE/acrylic resin/SiO2 complex
Guotuan Gu, Zhijun Zhang, Hongxin Dang, Zhishen Wu
Organic vapor sensibility of carbon black/polyethylene wax composites
Ming Qiu Zhang, Min Zhi Rong, Zhi Wei Zhang