Issue 22/2007
Content (54 Articles)
Studies on electrodeposition and corrosion behaviour of a Ni–W–Co amorphous alloy
Renato Alexandre C. Santana, Ana Regina N. Campos, Emanuelle A. Medeiros, Aldrighi Luiz M. Oliveira, Liana Maria F. Silva, Shiva Prasad
From Ti–Al- to Ti–Al–N-sputtered 2D materials
Maria Teresa Vieira, Ana S. Ramos, José M. Castanho, João C. Oliveira, Albano Cavaleiro
Electrochemical deposition of Ni and Cu onto monocrystalline n-Si(100) wafers and into nanopores in Si/SiO2 template
Yu. A. Ivanova, D. K. Ivanou, A. K. Fedotov, E. A. Streltsov, S. E. Demyanov, A. V. Petrov, E. Yu. Kaniukov, D. Fink
Influence of novel additive on BMI resin and BMI resin matrix composite
B. Y. Zhang, M. Li, X. B. Chen
Transport study of a novel polyfluorene/poly(p-phenylenevinylene) copolymer by various mobility models
Lin Ke, Ronald Cai Cheng Han, Chellappan Vijila, Soo Jin Chua
Synthesis and characterization of copper sulfide nanocrystal with three-dimensional flower-shape
Jing Zou, Jianxue Zhang, Baohua Zhang, Pingtang Zhao, Xiaofeng Xu, Jun Chen, Kaixun Huang
Effect of bonding variables on TLP bonding of oxide dispersion strengthened superalloy
Ratan Kumar Saha, Tahir I. Khan
Effects of samarium dopant on photocatalytic activity of TiO2 nanocrystallite for methylene blue degradation
Qi Xiao, Zhichun Si, Jiang Zhang, Chong Xiao, Zhiming Yu, Guanzhou Qiu
Synthesis of (Y, Gd)3Al5O12:Ce nanophosphor by co-precipitation method and its luminescence behavior
Kai Zhang, Hezhou Liu, Yating Wu, Wenbin Hu
A facile two-step hydrothermal route for the synthesis of γ-Fe2O3 nanocrystals and their magnetic properties
Hongliang Zhu, Deren Yang, Luming Zhu, Hong Yang, Dalai Jin, Kuihong Yao
Preparation of meixnerite (Mg–Al–OH) type layered double hydroxide by a mechanochemical route
William Tongamp, Qiwu Zhang, Fumio Saito
Microstructure and phase transformations in a Ni50Mn29Ga16Gd5 alloy with a high transformation temperature
Wei Cai, Li Gao, Z. Y. Gao
Synthesis and characterization of LiNi0.9Co0.1O2 for lithium batteries
Daocong Li, Zhenghe Peng, Wenyong Guo, Chaoqun Yuan, Yangmei Liu, Yunhong Zhou
On the feasibility of synthesizing complex perovskite ferroelectric ceramics via a B-site oxide mixing route
Bijun Fang, Renbing Sun, Yuejin Shan, Keitaro Tezuka, Hideo Imoto
Size influence on optical absorption property of ultra-fine nickel hollow spheres
Zhibin Li, Yida Deng, Yating Wu, Bin Shen, Wenbin Hu
Visible-light responsive zinc ferrite doped titania photocatalyst for methyl orange degradation
Ping Cheng, Changsheng Deng, Mingyuan Gu, Wenfeng Shangguan
Microstructure and mechanical properties of Mg–Al–Zn alloy sheets severely deformed by accumulative roll-bonding
M. Y. Zhan, Y. Y. Li, W. P. Chen, W. D. Chen
Synthesis and characterization of morphologically different high purity gallium oxide nanopowders
U. Rambabu, N. R. Munirathnam, T. L. Prakash, B. Vengalrao, S. Buddhudu
Preparation, structure and hydrothermal stability of alternative (sodium silicate-free) geopolymers
David Koloušek, Jiri Brus, Martina Urbanova, Jana Andertova, Vaclav Hulinsky, Jindřich Vorel
Influence of temperature on fracture initiation in PET and PA66 fibres under cyclic loading
Christophe Le Clerc, Bernard Monasse, Anthony Roland Bunsell
The microstructure and mechanical properties of Fe–Cu materials fabricated by pressure-less-shaping of nanocrystalline powders
Rosa Di Maggio, Gloria Ischia, Mauro Bortolotti, Federico Rossi, Alberto Molinari
Effect of the preparation methodology on some physical and electrochemical properties of Ti/IrxSn(1−x)O2 materials
Josimar Ribeiro, Paula D. P. Alves, Adalgisa R. de Andrade
Redox behavior and reduction mechanism of Fe2O3–CeZrO2 as oxygen storage material
Vladimir Galvita, Kai Sundmacher
Synthesis and analysis of CuS with different morphologies using cyclic microwave irradiation
Titipun Thongtem, Anukorn Phuruangrat, Somchai Thongtem
Dielectric and thermal characteristics of gel grown single crystals of ytterbium tartrate trihydrate
Basharat Want, Farooq Ahmad, P. N. Kotru
Production and characterization of metastable Al2O3–TiO2 ceramic materials
Irene G. Cano, Sergi Dosta, Joan Ramon Miguel, Jose Maria Guilemany
Effect of calcium rich and alkaline solutions on the chemical behaviour of hemp fibres
David Sedan, Cécile Pagnoux, Thierry Chotard, Agnès Smith, Danielle Lejolly, Vincent Gloaguen, Pierre Krausz
Effect of Bi2O3 coating on interfacial wettability and tensile properties of Al18B4O33w/Al composite
Z. J. Li, L. D. Wang, H. Y. Yue, W. D. Fei
Synthesis of bulk metallic glass composites using high oxygen containing Zr sponge
Ranadeep Bhowmick, Bhaskar Majumdar, Dinesh K. Misra, Upadrasta Ramamurty, K. Chattopadhyay
A review on the synthesis of in situ aluminum based composites by thermal, mechanical and mechanical–thermal activation of chemical reactions
B. S. B. Reddy, Karabi Das, Siddhartha Das
The effect of caesium on barium hollandites studied by neutron diffraction and magic-angle spinning (MAS) nuclear magnetic resonance
Karl R. Whittle, Sharon E. Ashbrook, Gregory R. Lumpkin, Ian Farnan, Ronald I. Smith, Simon A. T. Redfern
Gas permeation properties of polyamide membrane prepared by interfacial polymerization
S. Sridhar, B. Smitha, Satyajai Mayor, B. Prathab, T. M. Aminabhavi
Oriented immobilization of IgG on hydroxylated Si(001) surfaces via protein-A by a multiple-step process based on a self-assembly approach
G. Demirel, M. O. Çağlayan, B. Garipcan, M. Duman, E. Pişkin
Sintering of ultra-fine tetragonal yttria-stabilized zirconia ceramics
Hwan-Cheol Kim, In-Jin Shon, In-Kyoon Jeong, In-Yong Ko, Z. A. Munir
Effect of Tb substitution on the magnetic properties of exchange-biased Nd2Fe14B/Fe3B
S. Manjura Hoque, M. A. Hakim, F. A. Khan, N. H. Dan
Characterization of Zr-doped TiO2 prepared by homogenous co-precipitation without high-temperature treatment
Jozef Lukáč, Mariana Klementová, Petr Bezdička, Snejana Bakardjieva, Jan Šubrt, Lórant Szatmáry, Anna Grusková
Effects of duty ratio at high frequency on growth mechanism of micro-plasma oxidation ceramic coatings on Ti alloy
Zhongping Yao, Yanli Jiang, Zhaohua Jiang, Fuping Wang
Interfacial energy determination of nano-scale precipitates by CALPHAD description of Gibbs–Thomson effect
Sina Shahandeh, Hamed Arami, S. K. Sadrnezhaad
Covalent attachment of poly (acrylic acid) onto multiwalled carbon nanotubes functionalized with formaldehyde via electrophilic substitution reaction
Zhi Yang, Xiao-Hua Chen, Shang-Zhou Xia, Yu-Xing Pu, Hai-Yang Xu, Wen-Hua Li, Long-Shan Xu, Bin Yi, Wei-Ying Pan
Effect of copper additions in directly quenched titanium–boron steels
S. K. Ghosh, A. Haldar, P. P. Chattopadhyay
Preparation and characterization of Al/AlN composites sintered under high pressure
J. G. Lee, H. A. Ma, X. L. Lee, Y. J. Zheng, G. H. Zuo, X. Jia
Novel critical point drying (CPD) based preparation and transmission electron microscopy (TEM) imaging of protein specific molecularly imprinted polymers (HydroMIPs)
Daniel M. Hawkins, E. Ann Ellis, Derek Stevenson, Andreas Holzenburg, Subrayal M. Reddy
Flower-like Se nanorods synthesized via carbamide-assisted hydrothermal routes
Fanglin Du, Hongni Wang
Enhancement of magnetic losses in hybrid polymer composites with MnZn-ferrite and conductive fillers
Robert Moučka, Alexander V. Lopatin, Natalia E. Kazantseva, Jarmila Vilčáková, Petr Sáha
Preparation of PP-g-PA6 copolymers through reactive blending
Dean Shi, Huabing Chen, R. K. Y. Li
Carbon nanotube: carbon composites with matrix derived from oxidized mesophase pitch
Yongzhong Song, Gengtai Zhai, Jinli Shi, Quangui Guo, Lang Liu