Issue 5/2010
Content (38 Articles)
Evidence for a threshold in the biosolubility of aluminosilicate vitreous fibers
François Devreux, Céline Cailleteau, Philippe Barboux
Structural and textural study of electrodeposited zinc from alkaline non-cyanide electrolyte
M. S. Chandrasekar, Shanmugasigamani Srinivasan, Malathy Pushpavanam
Tailoring the tensile/compressive response of magnesium alloy ZK60A using Al2O3 nanoparticles
P. Jayaramanavar, M. Paramsothy, A. Balaji, M. Gupta
Ultra-long SiO2 and SiO2/TiO2 tubes embedded with Pt nanoparticles using magnus green salt as templating structures
Catherine Aresipathi, Armin Feldhoff, Michael Wark
A novel method for preparation of organic resins reinforced geopolymer composites
Yao Jun Zhang, Sheng Li, De Long Xu, Bao Qiang Wang, Guo Ming Xu, Dong Feng Yang, Nan Wang, Hou Cun Liu, Ya Chao Wang
The toughness of epoxy polymers and fibre composites modified with rubber microparticles and silica nanoparticles
T. H. Hsieh, A. J. Kinloch, K. Masania, J. Sohn Lee, A. C. Taylor, S. Sprenger
Microstructural effects on the phase transitions and the thermal evolution of elastic and piezoelectric properties in highly dense, submicron-structured NaNbO3 ceramics
A. Moure, T. Hungría, A. Castro, L. Pardo
An etching characterization method for revealing the plastic deformation zone in a SUS303 stainless steel
Mitsuhiro Okayasu, Kazuto Sato, Satoshi Takasu
A comparison of results obtained using different methods to assess the elastic properties of ceramic materials exemplified for Ba0.5Sr0.5Co0.8Fe0.2O3−δ
J. Malzbender, B. Huang, J. Mönch, R. W. Steinbrech
Heterogeneous crystallization and composition dependence of optical parameters in Sn–Sb–Bi–Se chalcogenides
Muneer Ahmad, R. Thangaraj, T. Stephen Sathiaraj
The room temperature photoluminescence properties of Eu3+-doped bi-phase calcium phosphate under visible light
Han Wang, Jun Yu, Jianqiu Li, Xiaokun Cheng, Zhiliang Huang
Structural and electrical conductivity studies on undoped and copper-doped nanocrystalline zinc sulphide
S. Chellammal, S. Sankar, S. Selvakumar, E. Viswanathan, R. Murugaraj, K. Sivaji
Effect of welding heat input on microstructure and mechanical properties of simulated HAZ in Cu containing microalloyed steel
Amer E. Amer, Min Y. Koo, Kyong H. Lee, Sang H. Kim, Soon H. Hong
Mesoporous titania–silica composite from sodium silicate and titanium oxychloride. Part I: grafting method
Askwar Hilonga, Jong-Kil Kim, Pradip B. Sarawade, Hee Taik Kim
Mesoporous titania–silica composite from sodium silicate and titanium oxychloride. Part II: one-pot co-condensation method
Askwar Hilonga, Jong-Kil Kim, Pradip B. Sarawade, Hee Taik Kim
Electronic characterization and photocatalytic properties of TiO2/CdO electrospun nanofibers
Muzafar A. Kanjwal, Nasser A. M. Barakat, Faheem A. Sheikh, Hak Yong Kim
Mechanical studies on poly(vinyl chloride)–poly(methyl methacrylate)-based polymer electrolytes
S. Ramesh, Tan Winie, A. K. Arof
In vitro degradation and drug release from polymer blends based on poly(dl-lactide), poly(l-lactide-glycolide) and poly(ε-caprolactone)
Paul F. McDonald, John G. Lyons, Luke M. Geever, Clement L. Higginbotham
Dry rolling and sliding friction and wear of organophilic layered silicate/hydrogenated nitrile rubber nanocomposite
Dan Xu, József Karger-Kocsis
Solvent control of cellulose acetate nanofibre felt structure produced by electrospinning
Daniel Haas, Stefan Heinrich, Peter Greil
Self-assembly of coordination polymers constructed from CuCN and unidentate pyridine bases
Safaa El-din H. Etaiw, Said A. Amer, Mohamed M. El-bendary
1,3,4-Oxadiazole epoxy resin-based liquid crystalline thermosets and their cure kinetics
R. Balamurugan, P. Kannan
Isothermal crystallization kinetics of poly(vinylidene fluoride) in the α-phase in the scope of the Avrami equation
V. Sencadas, C. M. Costa, J. L. Gómez Ribelles, S. Lanceros-Mendez
Utilization of olive mill sludge in manufacture of lignocellulosic/polypropylene composite
Nadir Ayrilmis, Umit Buyuksari
Functional geraniol-Ca(OH)2 composite/sodium acetate alginate film on nonwoven polyethylene sheet: acetic acid gas production in response to acid
Hideaki Ichiura, Yoshitsugu Kaneda, Yoshito Ohtani
Microstructures formed during devitrification of Na2O·Al2O3·B2O3·SiO2·Fe2O3 glasses
Ruzha Harizanova, Günter Völksch, Christian Rüssel
High strength bio-composite films of poly(vinyl alcohol) reinforced with chemically modified-fly ash
Dilip Chandra Deb Nath, Sri Bandyopadhyay, Aibing Yu, Darryl Blackburn, Chris White
Investigation on preparation of nano-size Gd0.2Ce0.8O2−δ material and its humidity sensing properties
Yu Wen Hao, Jing Wang, Zhou Ye Chen
The effects of temperature on the molecular orientation of zinc phthalocyanine films
Luciana Gaffo, Márcia R. Cordeiro, Adonilson R. Freitas, Wania C. Moreira, Emerson M. Girotto, Valtencir Zucolotto
Study of tensile deformation behaviour of M250 grade maraging steel using acoustic emission
C. K. Mukhopadhyay, K. V. Rajkumar, T. Jayakumar, Baldev Raj
Improved structural stability of titanium-doped β-Bi2O3 during visible-light-activated photocatalytic processes
Yan Wang, Yanyuan Wen, Hanming Ding, Yongkui Shan
Development of pitch-based carbon–copper composites
Anil Kumar, Mandeep Kaur, Rajeev Kumar, Pinaki Ranjan Sengupta, Vasantha Raman, Gopal Bhatia, Kedar Nath Sood
Effects of short aging on thickening anisotropy of θ′ precipitate and mechanical properties of severe cold-rolled 2519A aluminum alloy plate
Xin-ming Zhang, Zhi-guo Gao, Yi-sheng Zhao
A preliminary study of calcium containing plasma electrolytic oxidation coatings on AM50 magnesium alloy
P. Bala Srinivasan, J. Liang, C. Blawert, M. Störmer, W. Dietzel
A non-destructive method for thickness measurement of thin electrospun membranes using white light profilometry
Nor Dalila Nor Affandi, Yen Bach Truong, Ilias Louis Kyratzis, Rajiv Padhye, Lyndon Arnold
Controlled synthesis of MnFe2O4–Ni core–shell nanoparticles
Su-Chul Yang, Cheol-Woo Ahn, Chee-Sung Park, Yaodong Yang, Dwight Viehland, Shashank Priya