Issue 4/2021
Content (45 Articles)
Synthesis and properties of strong and tough Diels–Alder self-healing crosslinked polyamides
Jinnan Zhao, Shuo Chen, Jingbo Zhao, Zhiyuan Zhang, Junying Zhang
Effect of epoxy resin healing agent viscosity on the self-healing performance of capsules reinforced polymer composite
Raj Kumar Pittala, Satish Ben B, Avinash Ben B
Polystyrene brushes/TiO2 nanoparticles prepared via SI-ATRP on polypropylene and its superhydrophobicity
Cintia Belén Contreras, Daniel Eduardo Weibel, Miriam Cristina Strumia
Evaluation of a rapid and long-effective pickling method for iron rust removal on metallic surfaces using carboxylic acid-based polymers
Antonio Guerra-Contreras, Abygail Camacho-Ramírez, Miguel Olvera-Sosa, Raúl González-García, Gabriela Palestino
Preparation and dispersion properties of polycarbonate superplasticizers based on RAFT polymerization
Mei Ding, Xiuzhi Zhang, Xiangyun Mi, Ming Zhang, Wenjuan Guo, Meishan Pei
Influence of natural crosslinker and fibre weightage on waste kibisu fibre reinforced wheatgluten biocomposite
Papiya Bhowmik, Ravi Kant, Rahul Nair, Harpreet Singh
Kinetic and mechanistic aspects during a styrene-based Pickering emulsion polymerization: Importance of the co-aid adsorption
Maricruz Solís-López, Iván Puente-Lee, Benoit Fouconnier, Francisco López-Serrano
Activation of electrospun carbon fibers: the effect of fiber diameter on CO2 and steam reaction kinetics
Johannes Erben, Alenica Heußner, Simon Thiele, Sven Kerzenmacher
A multiscale simulation of amorphous polystyrene
Kamonthira Wichai, Visit Vao-soongnern
Poly(ethylene 2,6-naphthalate) blends containing a phenylphosphonic acid salts compound with a highly enhanced crystallization rate
Jiajie Yin, Faliang Luo, Mengke Wang
Rosin-modified o-cresol novolac based vinyl ester thermosets containing methacrylated lignin model compounds: synthesis, curing and thermo-mechanical analysis
Shipra Jaswal, Tamanna Thakur, Bharti Gaur
Evaluation of the mechanical properties and blood compatibility of Polycarbonate Urethane and fluorescent self-colored Polycarbonate Urethane as Polymeric Biomaterials
Ehsan Zamani, Hossein Yahyaei, Majid Zamani
“One-pot direct synthesis of novel antibacterial diblock copolymers-based-vinyl acetate via RAFT polymerization”
Iram Asif, Syeda Rubina Gilani, Phool Shahzadi, Shaista Sabir
Preparation, characterization, and performance of bio-based polyester composites derived from renewable distillers grains and shellfish
Chin-San Wu, Dung-Yi Wu, Shan-Shue Wang
Layer-by-layer polyamide thin film nanocomposite membrane: synthesis, characterization and using as pervaporation membrane to separate methyl tertiary butyl ether/methanol mixture
Farzaneh Alibakhshian, Mahdi Pourafshari Chenar, Morteza Asghari, Mohammad Reza Moradi
The effect of phase separation on crystallization of polyethylene/poly(ethylene-alt-propylene) blend
Hengyu Luo, Houfang Chi, Yong Tao, Junyu Li, Zhen Liu, Haiqing Hu
Segmental evolution of ultraviolet weathered polyurea
Aryan Blourchian, Atif Mohammed Shaik, Nha Uyen Huynh, George Youssef
PEGylation of poly(hydroxybutyrate) into multicomponent nanostructures and loading thereon with bioactive molecules for potential biomedical applications
Zulfiqar Ali Raza, Safa Noor, Muhammad Irfan Majeed
Covalent triazine based polymer with high nitrogen levels for removal of copper (II) ions from aqueous solutions
Mohammad Dinari, Nazanin Mokhtari, Mohammad Hatami
Physicochemical characterization of SnO2 grafted Poly p-phenylenediamine hybrid Nanocomposites and their enhanced antibacterial properties
Shyamal Baruah, Bharat Nayak, Amrit Puzari
Preparation and physical properties of transparent foldable poly(methyl methacrylate) based materials using reactive poly(vinyl butyral)
Hideki Sugimoto, Yuya Aoki
A novel kind of room temperature self-healing poly(urethane-urea) with robust mechanical strength based on aromatic disulfide
Jin He, Fangfang Song, Xiong Li, Liyi Chen, Xingyu Gong, Weiping Tu
Production and characterization of carbon/carbon composites from thermoplastic matrices
Luiza dos Santos Conejo, Hermes Rocha de Meneses Neto, Juliana Bovi de Oliveira, Luis Felipe de Paula Santos, Roberto Zenhei Nakazato, Luis Rogerio de Oliveira Hein, Winand Kok, Edson Cocchieri Botelho
Effect of the lanthanum and cerium phenylphosphonates on the crystallization and mechanical properties of isotactic polypropylene
Xixiang Zhang, Xiaofeng Jiang, Wei Qin, Ke Zhang, Zhong Xin, Shicheng Zhao
Sulfonated poly (Ester-Urethane) / ionic liquids systems: synthesis, characterization and properties
Yosra Hadj kacem, Abdelkader Bougarech, Guilhem Quintard, Souhir Abid, Majdi Abid, Etienne Fleury
Alkynyl-functionalization of carbon nanotubes to promote anchoring potential in glycidyl azide polymer-based binders via Huisgen reaction for solid propellant application
Wen Hu, Chun Qi, Xiang Guo, Ai-min Pang, Na Zhou, Jun Lu, Gen Tang, Lin Gan, Jin Huang
Development of thermoresponsive poloxamer in situ gel loaded with gentamicin sulfate for cavity wounds
Jitti Niyompanich, Piyachat Chuysinuan, Prasit Pavasant, Pitt Supaphol
Compatibility effect of r-ABS/r-HIPS/r-PS blend recovered from waste keyboard plastics: evaluation of mechanical, thermal and morphological performance
Jaidev K, Manoranjan Biswal, Smita Mohanty, Sanjay K. Nayak
Poly (phenyl sulfone)/graphite composite as a robust low-cost, comb-type interdigited sensor for detection of organic solvent vapors
Dolunay Sakar Dasdan
Development and simplification of a micromechanic model for conductivity of carbon nanotubes-reinforced nanocomposites
Yasser Zare, Kyong Yop Rhee
Cross-linking induced thermo-responsive self-healing hydrogel with gel-sol–gel transition constructed on dynamic covalent bond
Jiafu Shen, Limin Chang, Danyang Chen, Yong Wang, Wenjuan Li, Yingna He, Jianglei Qin
Mechanical and barrier properties of LLDPE/TPS/OMMT packaging film in the presence of POE-g-IA or POE-g-MA
Amir Kazemi, Saied Nouri Khorasani, Mohammad Dinari, Shahla Khalili
Ultrahigh sensitivity and wide strain range of porous pressure sensor based on binary conductive fillers by in-situ polymerization
Zhiqiang Hu, Yangyang Xin, Qiang Fu
Optimization of zero-shear viscosity for HPAM-Polystyrene microspheres formulations through experimental design approach
Seif El Islam Lebouachera, Mohammed Abdelfetah Ghriga, Ghada Ben Salha, Hind El Hadri, Mahdi Hasanzadeh, Nadjib Drouiche, Stéphanie Reynaud, Bruno Grassl
Evaluation of the synthesis variables’ effect on the properties of PUF/ENB microcapsules using experimental design
Thais Maria Alves Marinho, Vinicius Silva Pontes, José Daniel Diniz Melo, Maria Carolina Burgos Costa
A polymer hybrid film based on poly(vinyl cinnamate) and poly(2-hydroxy ethyl methacrylate) for controlled flurbiprofen release
Mamoon Alokour, Elvan Yilmaz
Influences of processing conditions on the glass transition of soft poly(vinyl chloride) compounds filled with calcium carbonate
Hang Li, Juan Zhang, Feng Wei, Juan Yan, Zhen Da, Yijian Chu, Xuehui Wang, Zhigang Wang
Effect of CeO2-Fe2O3 coated SiO2 nanoparticles on the thermal stability and UV resistance of polyurethane films
Ngoc Nhiem Dao, Thi Ha Chi Nguyen, Trung Dung Doan, Ngoc Chuc Pham, Quang Bac Nguyen, Thi Lim Duong, Ngo Nghia Pham, Vu Ngoc Mai Nguyen, Dai Lam Tran
Modification of carbon nanotube with poly(amidoamine) dendritic structures to prepare a multifunctional hybrid curing component for epoxidized polyurethane and novolac resins
Mohammadreza Izadi, Hanieh Mardani, Hossein Roghani-Mamaqani, Mehdi Salami-Kalajahi
Thermo-oxidative degradation of vulcanized SBR: A comparison between ultraviolet (UV) and microwave as recovery techniques
Mostafa G. Aboelkheir, Jose Gonçalves Lima Junior, Romildo Dias Toledo Filho, Fernando Gomes Souza Junior, Celeste Yara dos Santos Siqueira
Preparation and study on properties of dual responsive block copolymer-grafted polypyrrole smart Janus nanoparticles
Farnaz Amani, Elham Dehghani, Mehdi Salami-Kalajahi
Improving the low-temperature toughness of PPR pipe by compounding with PERT
Yunqi Wu, Qian Ge, Feng Yang, Tong Wu, Ming Xiang
Chemically modified poly(lactic acid): structural approach employing two distinct monomers
Talita Rocha Rigolin, Lidiane Cristina Costa, Sílvia Helena Prado Bettini
Reinforcing potential of recycled carbon fibers in compatibilized polypropylene composites
Abbas Ghanbari, Shayan Seyedin, Seyyed Arash Haddadi, Mohammadreza Nofar, Amir Ameli