Top

Journal of Materials Science

Published in:

24-05-2021 | Materials for life sciences

Laser-modified Fe–30Mn surfaces with promoted biodegradability and biocompatibility toward biological applications

Authors: Yuanyuan Sun, Lu Chen, Ning Liu, Hongshui Wang, Chunyong Liang

Published in: Journal of Materials Science | Issue 24/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

FeMn alloy is a promising biodegradable metal because of its comparable mechanical properties and biodegradability, but the inadequate degradation and poor surface performance are still an important limitation of its development. In this work, laser surface modification was used to tailor the surface properties of Fe–30Mn alloy. After irradiation using continuous, nanosecond and femtosecond lasers, the Fe–30Mn surface characteristics were investigated, and the effect of surface structure on the corrosion behavior and antimicrobial activity was discussed. A micro-pattern of laser surface melting was obtained on Fe–30Mn by continuous laser and nanosecond laser irradiation, resulting in high roughness values as well as forming oxides on the surface. In contrast, a periodic nanostructure was generated on surface by femtosecond lasers, leading to a great increase in specific surface area. Compared with the others, the femtosecond laser-induced periodic nanostructure surface exhibits a significant improvement of the actual biodegradation rate after 30-day immersion. The antibacterial experimental results demonstrate that bacteria proliferation is not only affected by surface roughness, but also by surface flatness and surface structures. The results imply a great potential in local or complete surface characteristic of medical implants for functionalization by the flexible positioning of the laser beam.

previous article Two-dimensional metallic BP as anode material for lithium-ion and sodium-ion batteries with unprecedented performance

next article Poly(l-lactic acid)/alkali lignin composites: properties, biocompatibility, cytotoxicity and antimicrobial behavior

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Zheng YF, Gu XN, Witte F (2014) Biodegradable metals. Mater Sci Eng R Rep 77:1–34. https://doi.org/10.1016/j.mser.2014.01.001CrossRef

Hanzi AC, Gerber I, Schinhammer M, Loffler JF, Uggowitzer PJ (2010) On the in vitro and in vivo degradation performance and biological response of new biodegradable Mg–Y–Zn alloys. Acta Biomater 6:1824–1833. https://doi.org/10.1016/j.actbio.2009.10.008CrossRef

Qin Y, Wen P, Guo H et al (2019) Additive manufacturing of biodegradable metals: current research status and future perspectives. Acta Biomater 98:3–22. https://doi.org/10.1016/j.actbio.2019.04.046CrossRef

Li HF, Xie XH, Zheng YF et al (2015) Corrigendum: development of biodegradable Zn-1X binary alloys with nutrient alloying elements Mg Ca and Sr. Sci Rep 5:12190. https://doi.org/10.1038/srep12190CrossRef

Li H, Yang H, Zheng Y, Zhou F, Qiu K, Wang X (2015) Design and characterizations of novel biodegradable ternary Zn-based alloys with IIA nutrient alloying elements Mg, Ca and Sr. Mater Des 83:95–102. https://doi.org/10.1016/j.matdes.2015.05.089CrossRef

Chen Y, Xu Z, Smith C, Sankar J (2014) Recent advances on the development of magnesium alloys for biodegradable implants. Acta Biomater 10:4561–4573. https://doi.org/10.1016/j.actbio.2014.07.005CrossRef

Li JN, Cao P, Zhang XN, Zhang SX, He YH (2010) In vitro degradation and cell attachment of a PLGA coated biodegradable Mg–6Zn based alloy. J Mater Sci 45:6038–6045. https://doi.org/10.1007/s10853-010-4688-9CrossRef

Peuster HMJ (2001) A novel approach to temporary stenting: degradable cardiovascular stents produced from corrodible metal-results 6–18 months after implantation into New Zealand white rabbits. Heart 86:563–569. https://doi.org/10.1136/heart.86.5.563CrossRef

Peuster M, Hesse C, Schloo T, Fink C, Beerbaum P, Schnakenburg CV (2006) Long-term biocompatibility of a corrodible peripheral iron stent in the porcine descending aorta. Biomaterials 27:4955–4962. https://doi.org/10.1016/j.biomaterials.2006.05.029CrossRef

10.

Zhang E, Chen H, Shen F (2010) Biocorrosion properties and blood and cell compatibility of pure iron as a biodegradable biomaterial. J Mater Sci Mater Med 21:2151–2163. https://doi.org/10.1007/s10856-010-4070-0CrossRef

11.

Zhu S, Huang N, Xu L, Zhang Y, Liu H, Sun H, Leng Y (2009) Biocompatibility of pure iron: In vitro assessment of degradation kinetics and cytotoxicity on endothelial cells. Mater Sci Eng C 29:1589–1592. https://doi.org/10.1016/j.msec.2008.12.019CrossRef

12.

Martínez J, Aurelio G, Cuello G, Cotes SM, Fernández Guillermet A, Desimoni J (2005) Mössbauer spectroscopy, dilatometry and neutron diffraction detection of the ɛ-phase fraction in Fe–Mn shape memory alloys. Hyperfine Interact 161:221–227. https://doi.org/10.1007/s10751-005-9194-0CrossRef

13.

Liu B, Zheng YF, Ruan LJ (2011) In vitro investigation of Fe30Mn6Si shape memory alloy as potential biodegradable metallic material. Mater Lett 65:540–543. https://doi.org/10.1016/j.matlet.2010.10.068CrossRef

14.

Gorejová R, Haverová L, Oriňaková R, Oriňak A, Oriňak M (2018) Recent advancements in Fe-based biodegradable materials for bone repair. J Mater Sci 54:1913–1947. https://doi.org/10.1007/s10853-018-3011-zCrossRef

15.

Breur G, Jones-Hall Y, Nauman E, Stanciu L, Heiden M, Traverson M (2018) In vivo evaluation of biodegradability and biocompatibility of Fe30Mn alloy. Vet Comp Orthop Traumatol 31:010–016. https://doi.org/10.3415/vcot-17-06-0080CrossRef

16.

Hermawan H, Purnama A, Dube D, Couet J, Mantovani D (2010) Fe–Mn alloys for metallic biodegradable stents: degradation and cell viability studies. Acta Biomater 6:1852–1860. https://doi.org/10.1016/j.actbio.2009.11.025CrossRef

17.

Koyama M, Sawaguchi T, Tsuzaki K (2011) Work hardening and uniform elongation of an ultrafine-grained Fe–33Mn binary alloy. Mater Sci Eng A 530:659–663. https://doi.org/10.1016/j.msea.2011.10.038CrossRef

18.

Wang T, Wan Y, Liu Z (2016) Fabrication of hierarchical micro/nanotopography on bio-titanium alloy surface for cytocompatibility improvement. J Mater Sci 51:9551–9561. https://doi.org/10.1007/s10853-016-0219-7CrossRef

19.

Demir AG, Previtali B, Lecis N (2013) Development of laser dimpling strategies on TiN coatings for tribological applications with a highly energetic Q-switched fibre laser. Opt Laser Technol 54:53–61. https://doi.org/10.1016/j.optlastec.2013.05.007CrossRef

20.

De Giorgi C, Furlan V, Demir AG, Tallarita E, Candiani G, Previtali B (2017) Laser micropolishing of AISI 304 stainless steel surfaces for cleanability and bacteria removal capability. Appl Surf Sci 406:199–211. https://doi.org/10.1016/j.apsusc.2017.02.083CrossRef

21.

Furlan V, Biondi M, Demir AG, Pariani G, Previtali B, Bianco A (2017) Sub-micrometric surface texturing of AZ31 Mg-alloy through two-beam direct laser interference patterning with a ns-pulsed green fiber laser. Appl Surf Sci 423:619–629. https://doi.org/10.1016/j.apsusc.2017.06.138CrossRef

22.

Cei S, Legitimo A, Barachini S et al (2011) Effect of laser micromachining of titanium on viability and responsiveness of osteoblast-like cells. Implant Dent 20:285–291. https://doi.org/10.1097/ID.0b013e31821bfa9fCrossRef

23.

Lee TM, Chang E, Yang CY (2004) Attachment and proliferation of neonatal rat calvarial osteoblasts on Ti6Al4V: effect of surface chemistries of the alloy. Biomaterials 25:23–32. https://doi.org/10.1016/s0142-9612(03)00465-4CrossRef

24.

Liu X, Chu P, Ding C (2004) Surface modification of titanium, titanium alloys, and related materials for biomedical applications. Mater Sci Eng R Rep 47:49–121. https://doi.org/10.1016/j.mser.2004.11.001CrossRef

25.

Goldman M, Juodzbalys G, Vilkinis V (2014) Titanium surfaces with nanostructures influence on osteoblasts proliferation: a systematic review. J Oral Maxillofac Res 5:e1. https://doi.org/10.5037/jomr.2014.5301CrossRef

26.

Jager M, Jennissen HP, Dittrich F, Fischer A, Kohling HL (2017) Antimicrobial and osseointegration properties of nanostructured titanium orthopaedic implants. Materials 10:1302. https://doi.org/10.3390/ma10111302CrossRef

27.

Gokhan Demir A, Furlan V, Lecis N, Previtali B (2014) Laser surface structuring of AZ31 Mg alloy for controlled wettability. Biointerphases 9:029009. https://doi.org/10.1116/1.4868240CrossRef

28.

Chichkov BN, Momma C, Nolte S, Von Alvensleben F, Tünnermann A (1996) Femtosecond, picosecond and nanosecond laser ablation of solids. Appl Phys A 63:109–115. https://doi.org/10.1007/BF01567637CrossRef

29.

Menci G, Demir AG, Waugh DG, Lawrence J, Previtali B (2019) Laser surface texturing of β-Ti alloy for orthopaedics: effect of different wavelengths and pulse durations. Appl Surf Sci 489:175–186. https://doi.org/10.1016/j.apsusc.2019.05.111CrossRef

30.

Chen J, Ulerich JP, Abelev E, Fasasi A, Arnold CB, Soboyejo WO (2009) An investigation of the initial attachment and orientation of osteoblast-like cells on laser grooved Ti–6Al–4V surfaces. Mater Sci Eng C 29:1442–1452. https://doi.org/10.1016/j.msec.2008.11.014CrossRef

31.

Martinez-Calderon M, Manso-Silvan M, Rodriguez A, Gomez-Aranzadi M, Garcia-Ruiz JP, Olaizola SM, Martin-Palma RJ (2016) Surface micro- and nano-texturing of stainless steel by femtosecond laser for the control of cell migration. Sci Rep 6:36296. https://doi.org/10.1038/srep36296CrossRef

32.

Furlan V, Demir AG, Previtali B (2015) Micro and sub-micron surface structuring of AZ31 by laser re-melting and dimpling. Opt Laser Technol 75:164–172. https://doi.org/10.1016/j.optlastec.2015.06.030CrossRef

33.

Manne B, Thiruvayapati H, Bontha S, Motagondanahalli Rangarasaiah R, Das M, Balla VK (2018) Surface design of Mg–Zn alloy temporary orthopaedic implants: tailoring wettability and biodegradability using laser surface melting. Surf Coat Technol 347:337–349. https://doi.org/10.1016/j.surfcoat.2018.05.017CrossRef

34.

Taltavull C, Torres B, Lopez AJ, Rodrigo P, Otero E, Atrens A, Rams J (2014) Corrosion behaviour of laser surface melted magnesium alloy AZ91D. Mater Des 57:40–50. https://doi.org/10.1016/j.matdes.2013.12.069CrossRef

35.

Carluccio D, Xu C, Venezuela J et al (2020) Additively manufactured iron-manganese for biodegradable porous load-bearing bone scaffold applications. Acta Biomater 103:346–360. https://doi.org/10.1016/j.actbio.2019.12.018CrossRef

36.

Sotoudehbagha P, Sheibani S, Khakbiz M, Ebrahimi-Barough S, Hermawan H (2018) Novel antibacterial biodegradable Fe–Mn–Ag alloys produced by mechanical alloying. Mater Sci Eng C 88:88–94. https://doi.org/10.1016/j.msec.2018.03.005CrossRef

37.

Heiden M, Nauman E, Stanciu L (2017) Bioresorbable Fe–Mn and Fe–Mn–HA materials for orthopedic implantation: enhancing degradation through porosity control. Adv Healthc Mater 6:1700120. https://doi.org/10.1002/adhm.201700120CrossRef

38.

Gao L, Liu Z, Ge Y, Feng C, Chu M, Tang J (2019) Synthesis and characterization of manganese ferrite MnxFe3-xO4 from ferruginous manganese ores by multi-step roasting and magnetic separation. Powder Technol 356:373–382. https://doi.org/10.1016/j.powtec.2019.08.032CrossRef

39.

Wen Z, Lu J, Zhang Y et al (2020) Simultaneous oxidation and immobilization of arsenite from water by nanosized magnetic mesoporous iron manganese bimetal oxides (Nanosized-MMIM): Synergistic effect and interface catalysis. Chem Eng J 391:123578. https://doi.org/10.1016/j.cej.2019.123578CrossRef

40.

Chen Y, Zeng Z, Li Y et al (2020) Glucose enhanced the oxidation performance of iron-manganese binary oxides: Structure and mechanism of removing tetracycline. J Colloid Interface Sci 573:287–298. https://doi.org/10.1016/j.jcis.2020.04.006CrossRef

41.

Vorobyev AY, Makin VS, Guo CJ (2007) Periodic ordering of random surface nanostructures induced by femtosecond laser pulses on metals. J Appl Phys 101:034903–034904. https://doi.org/10.1063/1.2432288CrossRef

42.

Zhao QZ, Malzer S, Wang LJ (2007) Formation of subwavelength periodic structures on tungsten induced by ultrashort laser pulses. Opt Lett 32:1932–1934. https://doi.org/10.1364/OL.32.001932CrossRef

43.

Cunha A, Serro AP, Oliveira V, Almeida A, Vilar R, Durrieu M-C (2013) Wetting behaviour of femtosecond laser textured Ti–6Al–4V surfaces. Appl Surf Sci 265:688–696. https://doi.org/10.1016/j.apsusc.2012.11.085CrossRef

44.

Kietzig A-M, Hatzikiriakos SG, Englezos P (2009) Patterned Superhydrophobic Metallic Surfaces. Langmuir 25:4821–4827. https://doi.org/10.1021/la8037582CrossRef

45.

Yong J, Chen F, Yang Q, Huo J, Hou X (2017) Superoleophobic surfaces. Chem Soc Rev 46:4168–4217. https://doi.org/10.1039/c6cs00751aCrossRef

46.

Huang SM, Nauman EA, Stanciu LA (2019) Investigation of porosity on mechanical properties, degradation and in-vitro cytotoxicity limit of Fe30Mn using space holder technique. Mater Sci Eng C Mater Biol Appl 99:1048–1057. https://doi.org/10.1016/j.msec.2019.02.055CrossRef

47.

Sing NB, Mostavan A, Hamzah E, Mantovani D, Hermawan H (2015) Degradation behavior of biodegradable Fe35Mn alloy stents. J Biomed Mater Res B Appl Biomater 103:572–577. https://doi.org/10.1002/jbm.b.33242CrossRef

48.

Heiden M, Walker E, Nauman E, Stanciu L (2015) Evolution of novel bioresorbable iron-manganese implant surfaces and their degradation behaviors in vitro. J Biomed Mater Res A 103:185–193. https://doi.org/10.1002/jbm.a.35155CrossRef

49.

Sharma N, Jandaik S, Kumar S, Chitkara M, Sandhu IS (2015) Synthesis, characterisation and antimicrobial activity of manganese- and iron-doped zinc oxide nanoparticles. J Exp Nanosci 11:54–71. https://doi.org/10.1080/17458080.2015.1025302CrossRef

50.

Cheng Y, Yang Q, Lu Y, Yong J, Fang Y, Hou X, Chen F (2020) A femtosecond Bessel laser for preparing a nontoxic slippery liquid-infused porous surface (SLIPS) for improving the hemocompatibility of NiTi alloys. Biomater Sci 8:6505–6514. https://doi.org/10.1039/d0bm01369bCrossRef

51.

Pogodin S, Hasan J, Baulin VA et al (2013) Biophysical model of bacterial cell interactions with nanopatterned cicada wing surfaces. Biophys J 104:835–840. https://doi.org/10.1016/j.bpj.2012.12.046CrossRef

Title: Laser-modified Fe–30Mn surfaces with promoted biodegradability and biocompatibility toward biological applications
Authors: Yuanyuan Sun
Lu Chen
Ning Liu
Hongshui Wang
Chunyong Liang
Publication date: 24-05-2021
Publisher: Springer US
Published in: Journal of Materials Science / Issue 24/2021
Print ISSN: 0022-2461
Electronic ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-021-06139-y

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 24/2021

Microstructure evolution and mechanical responses of Al–Zn–Mg–Cu alloys during hot deformation process

New observations of the twinning effect and austenite stability in intercritical quenched and tempered steel with high strength

The unstable thermoelectric effect in non-stoichiometric Cu2Se during the non-equilibrium phase transition

Covalent surface functionalization of carbon nanostructures via [2 + 1] cycloaddition microwave-assisted reactions

Nanocellulose intercalation to boost the performance of MXene pressure sensor for human interactive monitoring

Sustainable betalain pigments as eco-friendly film coating over aluminium surface

Premium Partners