Top

Strength of Materials

Published in:

01-01-2015

Mechanical Behavior of the Weld Joints of Thick Steel Plates Produced by Various Welding Processes

Authors: HanSur Bang, HeeSeon Bang, ChanSeung Ro, SuOk Jeong

Published in: Strength of Materials | Issue 1/2015

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The effect of a welding process [electrogas welding (EGW) and flux cored arc welding (FCAW)] on the fracture toughness, CTOD (crack tip opening displacement), and mechanical properties (tensile, bending, impact strengths and hardness) of thick weld joints is examined. The CTOD value of the FCAW weld joints was higher than that of the EGW ones. The fractured welded specimen after the CTOD test reveals ductile and cleavage fractures of the weld joint faces after flux cored arc and electrogas weldings, respectively. The mechanical properties of the EGW welded specimens satisfied relevant classification rules. These results suggest that the EGW process is an effective substitute for the current welding process (FCAW) used for high-strength thick steel plates.

previous article Nonlinearity of the Rock Joint Shear Strength

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

D. J. Park, H. Kim, and K. C. Nam, “An empirical study on the economical benefit of space chartering,” J. Kor. Nav. Port Res., 30, No. 8, 663–668 (2006).CrossRef

C. G. Kim, “A study on the trend and its limitation of building large container ship to reduce the logistics cost,” in: The Korean Association of Shipping and Logistics (2002).

http://www.intport.org/html/sub2_2.html.

C. I. Hsu and Y. P. Hsieh, “Shipping economic analysis for ultra large container ship,” J. East. Asia Soc. Transport. Stud., 6, 936–951 (2005).

K. K. Um, S. H. Kim, et al., “High performance steel plates for shipbuilding applications,” in: Proc. of 18th International Offshore and Polar Engineering Conference (July 6–11, 2008, Vancouver, Canada), International Society of Offshore and Polar Engineers (2008), ISOPE-I-08-317.

S. H. Kim, I. S. Suh, and K. B. Kan, Development of TMCP Steel Plate for Shipbuilding Application, Posco Technical Report, No. 10 (2006).

S. Suzuki, R. Muraoka, T. Obinata, et al., Steel Products for Shipbuilding, JFE Technical Report, No. 2 (2004).

M. Minagawa, K. Ishida, Y. Funatsu, et al., 390 MPa Yield Strength Steel Plate for Large Heat-Input Welding for Large Container Ships, Nippon Steel Technical Report, No. 90 (2004), pp. 7–10.

K. Sasaki, K. Suda, R. Motomatsu, et al., Development of Two-Electrode Electrogas Arc Welding Process, Nippon Steel Technical Report, No. 90 (2004), pp. 67–74.

10.

S. Suzuki, K. Ichimiya, and T. Akita, High Tensile Strength Steel Plates with Excellent HAZ Toughness for Shipbuilding, JFE Technical Report, No. 5 (2005).

11.

C. M. Kim, J. B. Lee, and W. Y. Choo, “Characteristics of single pass welds in 50 kJ/mm of heavy thickness shipbuilding steel,” in: Proc. of 13rd Int. Offshore and Polar Engineering Conference (May 25–30, 2003, Honolulu, Hawaii, USA) (2003).

12.

H. C. Jeong, Y. H. Park, Y. H. An, and J. B. Lee, “Mechanical properties and micro structures of high heat input welded tandem EGW joint in EH36-TM steel,” J. Korean Weld. Join. Soc., 25, No. 1, 57–62 (2007).CrossRef

13.

J. S. Park, G. B. An, B. Y. Jung, and J. B. Lee, “Effect of welding heat input on the crack arrestability of thick steel plate welds,” in: Proc. of 18th Int. Offshore and Polar Engineering Conference (July 6–11, 2008, Vancouver, Canada) (2008).

14.

T. Inoue, T. Ishikawa, S Imai, et al., “Long crack arrestability of heavy-thick shipbuilding steels,” in: Proc. of 18th Int. Offshore and Polar Engineering Conference (July 6–11, 2008, Vancouver, Canada) (2008).

Title: Mechanical Behavior of the Weld Joints of Thick Steel Plates Produced by Various Welding Processes
Authors: HanSur Bang
HeeSeon Bang
ChanSeung Ro
SuOk Jeong
Publication date: 01-01-2015
Publisher: Springer US
Published in: Strength of Materials / Issue 1/2015
Print ISSN: 0039-2316
Electronic ISSN: 1573-9325
DOI: https://doi.org/10.1007/s11223-015-9650-2

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 1/2015

Surface Treatment with the Cold Roll Bonding Process for an Aluminum Alloy and Mild Steel

Mechanical Properties of GF/pCBT Composites and Their Fusion-Bonded Joints: Influence of Process Parameters

Dynamic and Postdeformation Recrystallization of Nuclear-Grade 316LN Stainless Steel

Experimental Study on the Heterogeneity of Mechanical Properties of Friction Stir Welded Joints with the Digital Image Correlation Method

Effect of Carburizing and Shot Peening on the Microstructure and Surface Properties of 17-CrNi6-Mo Steel

Compressive Properties of SiC Particle-Reinforced Aluminum Matrix Composites Under Repeated Impact Loading

Premium Partners