Skip to main content
Top
Published in: Journal of Materials Science 18/2021

Open Access 17-03-2021 | Review

Mechanics of the small punch test: a review and qualification of additive manufacturing materials

Authors: Jonathan Torres, Ali P. Gordon

Published in: Journal of Materials Science | Issue 18/2021

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The small punch test (SPT) was developed for situations where source material is scarce, costly or otherwise difficult to acquire, and has been used for assessing components with variable, location-dependent material properties. Although lacking standardization, the SPT has been employed to assess material properties and verified using traditional testing. Several methods exist for equating SPT results with traditional stress–strain data. There are, however, areas of weakness, such as fracture and fatigue approaches. This document outlines the history and methodologies of SPT, reviewing the body of contemporary literature and presenting relevant findings and formulations for correlating SPT results with conventional tests. Analysis of literature is extended to evaluating the suitability of the SPT for use with additively manufactured (AM) materials. The suitability of this approach is shown through a parametric study using an approximation of the SPT via FEA, varying material properties as would be seen with varying AM process parameters. Equations describing the relationship between SPT results and conventional testing data are presented. Correlation constants dictating these relationships are determined using an accumulation of data from the literature reviewed here, along with novel experimental data. This includes AM materials to assess the fit of these and provide context for a wider view of the methodology and its interest to materials science and additive manufacturing. A case is made for the continued development of the small punch test, identifying strengths and knowledge gaps, showing need for standardization of this simple yet highly versatile method for expediting studies of material properties and optimization.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Manahan MP, Argon AS, Harling OK (1981) The development of a miniaturized disk bend test for the determination of postirradiation mechanical properties. J Nucl Mater 104:1545–1550CrossRef Manahan MP, Argon AS, Harling OK (1981) The development of a miniaturized disk bend test for the determination of postirradiation mechanical properties. J Nucl Mater 104:1545–1550CrossRef
2.
go back to reference Manahan M, Browning A, Argon A, Harling O (1986) Miniaturized disk bend test technique development and application. The use of small-scale specimens for testing irradiated material. ASTM International, West Conshohocken, PA, pp 17–49CrossRef Manahan M, Browning A, Argon A, Harling O (1986) Miniaturized disk bend test technique development and application. The use of small-scale specimens for testing irradiated material. ASTM International, West Conshohocken, PA, pp 17–49CrossRef
3.
go back to reference Corwin WR, Lucas GE (eds) (1986) The use of small-scale specimens for testing irradiated material: a symposium sponsored by ASTM committee E-10 on nuclear technology and applications, albuquerque, NM, 23 Sept. 1983. ASTM International, West Conshohocken, PA Corwin WR, Lucas GE (eds) (1986) The use of small-scale specimens for testing irradiated material: a symposium sponsored by ASTM committee E-10 on nuclear technology and applications, albuquerque, NM, 23 Sept. 1983. ASTM International, West Conshohocken, PA
4.
go back to reference Eto M, Takahashi H, Misawa T, Suzuki M, Nishiyama Y, Fukaya K, Jitsukawa S (1993) Development of a miniaturized bulge test (small punch test) for post-irradiation mechanical property evaluation. Small specimen test techniques applied to nuclear reactor vessel thermal annealing and plant life extension. ASTM International, West Conshohocken, PA, pp 241–255CrossRef Eto M, Takahashi H, Misawa T, Suzuki M, Nishiyama Y, Fukaya K, Jitsukawa S (1993) Development of a miniaturized bulge test (small punch test) for post-irradiation mechanical property evaluation. Small specimen test techniques applied to nuclear reactor vessel thermal annealing and plant life extension. ASTM International, West Conshohocken, PA, pp 241–255CrossRef
5.
go back to reference Linse T, Kuna M, Schuhknecht J, Viehrig H (2009) Application of the small-punch test to irradiated reactor vessel steels in the brittle-ductile transition region. small specimen test techniques: 5th Volume. ASTM International, West Conshohocken, PA Linse T, Kuna M, Schuhknecht J, Viehrig H (2009) Application of the small-punch test to irradiated reactor vessel steels in the brittle-ductile transition region. small specimen test techniques: 5th Volume. ASTM International, West Conshohocken, PA
6.
go back to reference Lucas GE (1990) Review of small specimen test techniques for irradiation testing. Metall Trans A 21(5):1105–1119CrossRef Lucas GE (1990) Review of small specimen test techniques for irradiation testing. Metall Trans A 21(5):1105–1119CrossRef
7.
go back to reference Rabenberg EM, Jaques BJ, Sencer BH, Garner FA, Freyer PD, Okita T, Butt DP (2014) Mechanical behavior of AISI 304SS determined by miniature test methods after neutron irradiation to 28dpa. J Nucl Mater 448(1–3):315–324CrossRef Rabenberg EM, Jaques BJ, Sencer BH, Garner FA, Freyer PD, Okita T, Butt DP (2014) Mechanical behavior of AISI 304SS determined by miniature test methods after neutron irradiation to 28dpa. J Nucl Mater 448(1–3):315–324CrossRef
8.
go back to reference Suzuki M, Eto M, Fukaya K, Nishiyama Y, Kodaira T, Oku T, Adachi M, Umino A, Takahashi I, Misawa T, Hamaguchi Y (1991) Evaluation of toughness degradation by small punch (SP) tests for neutron-irradiated 214Cr-1Mo steel. J Nucl Mater 179:441–444CrossRef Suzuki M, Eto M, Fukaya K, Nishiyama Y, Kodaira T, Oku T, Adachi M, Umino A, Takahashi I, Misawa T, Hamaguchi Y (1991) Evaluation of toughness degradation by small punch (SP) tests for neutron-irradiated 214Cr-1Mo steel. J Nucl Mater 179:441–444CrossRef
9.
go back to reference Ishii T, Ohmi M, Saito J, Hoshiya T, Ooka N, Jitsukawa S, Eto M (2000) Development of a small specimen test machine to evaluate irradiation embrittlement of fusion reactor materials. J Nucl Mater 283–287(2):1023–1027CrossRef Ishii T, Ohmi M, Saito J, Hoshiya T, Ooka N, Jitsukawa S, Eto M (2000) Development of a small specimen test machine to evaluate irradiation embrittlement of fusion reactor materials. J Nucl Mater 283–287(2):1023–1027CrossRef
10.
go back to reference Hurst R, Bicego V, Foulds J (2007) Small punch testing for creep: progress in Europe. In: Proceedings of the ASME pressure vessels and piping conference. American Society of Mechanical Engineers, San Antonio, TX Hurst R, Bicego V, Foulds J (2007) Small punch testing for creep: progress in Europe. In: Proceedings of the ASME pressure vessels and piping conference. American Society of Mechanical Engineers, San Antonio, TX
11.
go back to reference Hurst R, Matocha K (2012) Where are we now with the European code of practice for small punch testing. Determination of mechanical properties of materials by small punch and other miniature testing techniques. Ostrava, OCELOT sro, pp 4–18 Hurst R, Matocha K (2012) Where are we now with the European code of practice for small punch testing. Determination of mechanical properties of materials by small punch and other miniature testing techniques. Ostrava, OCELOT sro, pp 4–18
12.
go back to reference Rodríguez C, Arencón D, Belzunce J, Maspoch ML (2014) Small punch test on the analysis of fracture behaviour of PLA-nanocomposite films. Polym Test 33:21–29CrossRef Rodríguez C, Arencón D, Belzunce J, Maspoch ML (2014) Small punch test on the analysis of fracture behaviour of PLA-nanocomposite films. Polym Test 33:21–29CrossRef
13.
go back to reference Calaf Chica J, Bravo Díez PM, Preciado Calzada M (2018) Development of an improved prediction method for the yield strength of steel alloys in the small punch test. Mater Des 148:153–166CrossRef Calaf Chica J, Bravo Díez PM, Preciado Calzada M (2018) Development of an improved prediction method for the yield strength of steel alloys in the small punch test. Mater Des 148:153–166CrossRef
14.
go back to reference Moreno MF, Bertolino G, Yawny A (2016) The significance of specimen displacement definition on the mechanical properties derived from small punch test. Mater Des 95:623–631CrossRef Moreno MF, Bertolino G, Yawny A (2016) The significance of specimen displacement definition on the mechanical properties derived from small punch test. Mater Des 95:623–631CrossRef
15.
go back to reference Klevtsov I, Dedov A, Molodtsov A (2008) Using of small punch test for determination of tensile properties for power plant steels. In: 6th International DAAAM baltic conference. Tallinn, Estonia Klevtsov I, Dedov A, Molodtsov A (2008) Using of small punch test for determination of tensile properties for power plant steels. In: 6th International DAAAM baltic conference. Tallinn, Estonia
16.
go back to reference Klevtsov I, Dedov A, Molodtsov A (2009) Measurement of the tensile and yield strength of boiler steels by small punch and tensile test methods. Estonian J Eng 15(2):99–107CrossRef Klevtsov I, Dedov A, Molodtsov A (2009) Measurement of the tensile and yield strength of boiler steels by small punch and tensile test methods. Estonian J Eng 15(2):99–107CrossRef
17.
go back to reference Abendroth M, Kuna M (2003) Determination of deformation and failure properties of ductile materials by means of the small punch test and neural networks. Comput Mater Sci 28(3):633–644CrossRef Abendroth M, Kuna M (2003) Determination of deformation and failure properties of ductile materials by means of the small punch test and neural networks. Comput Mater Sci 28(3):633–644CrossRef
18.
go back to reference Prakash R, Arunkumar S (2014) Evaluation of damage in materials due to fatigue cycling through static and cyclic small punch testing. Small specimen test techniques: 6th volume. ASTM International, West Conshohocken, PA, pp 168–186 Prakash R, Arunkumar S (2014) Evaluation of damage in materials due to fatigue cycling through static and cyclic small punch testing. Small specimen test techniques: 6th volume. ASTM International, West Conshohocken, PA, pp 168–186
19.
go back to reference Coleman M, Alshehri H, Banik R, Harrison W, Birosca S (2016) Deformation mechanisms of IN713C nickel based superalloy during Small Punch Testing. Mater Sci Eng A 650:422–431CrossRef Coleman M, Alshehri H, Banik R, Harrison W, Birosca S (2016) Deformation mechanisms of IN713C nickel based superalloy during Small Punch Testing. Mater Sci Eng A 650:422–431CrossRef
20.
go back to reference Cicero S, Lacalle R, Gutiérrez-Solana F (2011) Application of small punch techniques for the determination of gold mechanical properties. Strain 47:e484–e492CrossRef Cicero S, Lacalle R, Gutiérrez-Solana F (2011) Application of small punch techniques for the determination of gold mechanical properties. Strain 47:e484–e492CrossRef
21.
go back to reference Moor J, Debiccari A, Lagow B, Tewari S, Kinsella M (2010) Additive manufacturing for superalloys-producibility and cost validation. 7th international symposium on superalloy 718 and derivatives. TMS, Pittsburgh, Pennsylvania, pp 521–537CrossRef Moor J, Debiccari A, Lagow B, Tewari S, Kinsella M (2010) Additive manufacturing for superalloys-producibility and cost validation. 7th international symposium on superalloy 718 and derivatives. TMS, Pittsburgh, Pennsylvania, pp 521–537CrossRef
22.
go back to reference ASTM (2004) ASTM E8–04, standard test methods for tension testing of metallic materials ASTM (2004) ASTM E8–04, standard test methods for tension testing of metallic materials
23.
go back to reference Ha JS, Fleury E (1998) Small punch tests to estimate the mechanical properties of steels for steam power plant: II fracture toughness. Int J Press Vessels Pip 75(9):707–713CrossRef Ha JS, Fleury E (1998) Small punch tests to estimate the mechanical properties of steels for steam power plant: II fracture toughness. Int J Press Vessels Pip 75(9):707–713CrossRef
24.
go back to reference Suzuki M, Eto M, Nishiyama Y, Fukaya K, Isozaki T (1993) Estimation of toughness degradation by microhardness and small punch tests. Small specimen test techniques applied to nuclear reactor vessel thermal annealing and plant life extension. ASTM International, West Conshohocken, PA, pp 217–227CrossRef Suzuki M, Eto M, Nishiyama Y, Fukaya K, Isozaki T (1993) Estimation of toughness degradation by microhardness and small punch tests. Small specimen test techniques applied to nuclear reactor vessel thermal annealing and plant life extension. ASTM International, West Conshohocken, PA, pp 217–227CrossRef
25.
go back to reference Baik J-M, Kameda J, Buck O (1986) Development of small punch tests for ductile-brittle transition temperature measurement of temper embrittled Ni-Cr steels. The use of small-scale specimens for testing irradiated material. ASTM International, West Conshohocken, PA, pp 92–11CrossRef Baik J-M, Kameda J, Buck O (1986) Development of small punch tests for ductile-brittle transition temperature measurement of temper embrittled Ni-Cr steels. The use of small-scale specimens for testing irradiated material. ASTM International, West Conshohocken, PA, pp 92–11CrossRef
26.
go back to reference Bruchhausen M, Holmström S, Simonovski I, Austin T, Lapetite JM, Ripplinger S, de Haan F (2016) Recent developments in small punch testing: tensile properties and DBTT. Theor Appl Fract Mech 86:2–10CrossRef Bruchhausen M, Holmström S, Simonovski I, Austin T, Lapetite JM, Ripplinger S, de Haan F (2016) Recent developments in small punch testing: tensile properties and DBTT. Theor Appl Fract Mech 86:2–10CrossRef
27.
go back to reference Hayashi A, Iwamoto T (2017) An experimental evaluation of energy absorption of TRIP steel by small punch test. Key Eng Mater 725:60–65CrossRef Hayashi A, Iwamoto T (2017) An experimental evaluation of energy absorption of TRIP steel by small punch test. Key Eng Mater 725:60–65CrossRef
28.
go back to reference Husain A, Sharma R, Sehgal DK (2017) Small punch and indentation tests for structural health monitoring. Procedia Eng 173:710–717CrossRef Husain A, Sharma R, Sehgal DK (2017) Small punch and indentation tests for structural health monitoring. Procedia Eng 173:710–717CrossRef
29.
go back to reference ASTM (2013) ASTM F2977 standard test method for small punch testing of polymeric biomaterials used in surgical implants. ASTM International, West Conshohocken, PA ASTM (2013) ASTM F2977 standard test method for small punch testing of polymeric biomaterials used in surgical implants. ASTM International, West Conshohocken, PA
30.
go back to reference ASTM (2020) ASTM E3205–20, standard test method for small punch testing of metallic materials. ASTM International, West Conshohocken, PA ASTM (2020) ASTM E3205–20, standard test method for small punch testing of metallic materials. ASTM International, West Conshohocken, PA
31.
go back to reference Torres J and Gordon AP (2020) Expedited optimization of AM materials using miniaturized testing. In: TMS 2020. Springer, San Diego, CA Torres J and Gordon AP (2020) Expedited optimization of AM materials using miniaturized testing. In: TMS 2020. Springer, San Diego, CA
32.
go back to reference Rezaei A, Rezaeian A, Kermanpur A, Badrossamay M, Foroozmehr E, Marashi M, Foroozmehr A, Han J (2020) Microstructural and mechanical anisotropy of selective laser melted IN718 superalloy at room and high temperatures using small punch test. Mater Charact 162:110200CrossRef Rezaei A, Rezaeian A, Kermanpur A, Badrossamay M, Foroozmehr E, Marashi M, Foroozmehr A, Han J (2020) Microstructural and mechanical anisotropy of selective laser melted IN718 superalloy at room and high temperatures using small punch test. Mater Charact 162:110200CrossRef
33.
go back to reference Dao VH, Yu JM, Yoon KB (2020) Anisotropic creep behavior of stainless steel produced by selective laser melting. Mater Sci Eng A 796:140040CrossRef Dao VH, Yu JM, Yoon KB (2020) Anisotropic creep behavior of stainless steel produced by selective laser melting. Mater Sci Eng A 796:140040CrossRef
34.
go back to reference Davies S, Jeffs S, Lancaster R, Baxter G (2017) High temperature deformation mechanisms in a DLD nickel superalloy. Materials 10(5):457CrossRef Davies S, Jeffs S, Lancaster R, Baxter G (2017) High temperature deformation mechanisms in a DLD nickel superalloy. Materials 10(5):457CrossRef
35.
go back to reference Dadbakhsh S, Hao L, Sewell N (2012) Effect of selective laser melting layout on the quality of stainless steel parts. Rapid Prototyp J 18(3):241–249CrossRef Dadbakhsh S, Hao L, Sewell N (2012) Effect of selective laser melting layout on the quality of stainless steel parts. Rapid Prototyp J 18(3):241–249CrossRef
36.
go back to reference Hurst RC, Lancaster RJ, Jeffs SP, Bache MR (2016) The contribution of small punch testing towards the development of materials for aero-engine applications. Theor Appl Fract Mech 86:69–77CrossRef Hurst RC, Lancaster RJ, Jeffs SP, Bache MR (2016) The contribution of small punch testing towards the development of materials for aero-engine applications. Theor Appl Fract Mech 86:69–77CrossRef
37.
go back to reference Lancaster RJ, Banik R, Hurst RC, Bache MR, Baxter G (2014) Application of small punch test methods to advanced manufactured structures. In: 3rd international conference small scale test techniques. Schloss Seggau Seggauberg Lancaster RJ, Banik R, Hurst RC, Bache MR, Baxter G (2014) Application of small punch test methods to advanced manufactured structures. In: 3rd international conference small scale test techniques. Schloss Seggau Seggauberg
38.
go back to reference Altstadt E, Serrano M, Houska M, García-Junceda A (2016) Effect of anisotropic microstructure of a 12Cr-ODS steel on the fracture behaviour in the small punch test. Mater Sci Eng A 654:309–316CrossRef Altstadt E, Serrano M, Houska M, García-Junceda A (2016) Effect of anisotropic microstructure of a 12Cr-ODS steel on the fracture behaviour in the small punch test. Mater Sci Eng A 654:309–316CrossRef
39.
go back to reference Rodríguez C, Cabezas JG, Cárdenas E, Belzunce F, Betegón C (2009) Mechanical properties characterization of heat-affected zone using the small punch test. Weld J 88(9):188–192 Rodríguez C, Cabezas JG, Cárdenas E, Belzunce F, Betegón C (2009) Mechanical properties characterization of heat-affected zone using the small punch test. Weld J 88(9):188–192
40.
go back to reference Gülçimen B, Durmuş A, Ülkü S, Hurst RC, Turba K, Hähner P (2013) Mechanical characterisation of a P91 weldment by means of small punch fracture testing. Int J Press Vessels Pip 105–106:28–35CrossRef Gülçimen B, Durmuş A, Ülkü S, Hurst RC, Turba K, Hähner P (2013) Mechanical characterisation of a P91 weldment by means of small punch fracture testing. Int J Press Vessels Pip 105–106:28–35CrossRef
41.
go back to reference Zhao L, Jing H, Xu L, Han Y, Xiu J, Qiao Y (2013) Evaluating of creep property of distinct zones in P92 steel welded joint by small punch creep test. Mater Des 47:677–686CrossRef Zhao L, Jing H, Xu L, Han Y, Xiu J, Qiao Y (2013) Evaluating of creep property of distinct zones in P92 steel welded joint by small punch creep test. Mater Des 47:677–686CrossRef
42.
go back to reference Fernández M, Rodríguez C, Belzunce FJ, García TE (2015) Use of small punch test to estimate the mechanical properties of powder metallurgy products employed in the automotive industry. Powder Metall 58(3):171–177CrossRef Fernández M, Rodríguez C, Belzunce FJ, García TE (2015) Use of small punch test to estimate the mechanical properties of powder metallurgy products employed in the automotive industry. Powder Metall 58(3):171–177CrossRef
43.
go back to reference Fernández M, Rodríguez C, Belzunce FJ, García TE (2016) Use of small punch test to estimate the mechanical properties of sintered products and application to synchronizer hubs. Met Powder Rep 72(5):355–360CrossRef Fernández M, Rodríguez C, Belzunce FJ, García TE (2016) Use of small punch test to estimate the mechanical properties of sintered products and application to synchronizer hubs. Met Powder Rep 72(5):355–360CrossRef
44.
go back to reference Standardisation, E.C.f. (2006) CEN CWA 15627: small punch test method for metallic materials. European Committee for Standardisation Standardisation, E.C.f. (2006) CEN CWA 15627: small punch test method for metallic materials. European Committee for Standardisation
45.
go back to reference Matocha K (2015) Small-punch testing for tensile and fracture behavior: experiences and way forward. In: Small specimen test techniques: 6th volume. ASTM International, West Conshohocken, PA Matocha K (2015) Small-punch testing for tensile and fracture behavior: experiences and way forward. In: Small specimen test techniques: 6th volume. ASTM International, West Conshohocken, PA
46.
go back to reference Alegre JM, Cuesta II, Barbachano HL (2015) Determination of the fracture properties of metallic materials using pre-cracked small punch tests. Fatigue Fract Eng Mater Struct 38(1):104–112CrossRef Alegre JM, Cuesta II, Barbachano HL (2015) Determination of the fracture properties of metallic materials using pre-cracked small punch tests. Fatigue Fract Eng Mater Struct 38(1):104–112CrossRef
47.
go back to reference Andrés D, Lorenzo M, Lacalle R, Álvarez JA, Alegre JM (2016) Application of the small punch creep test to predict times to rupture on magnesium alloys. Theor Appl Fract Mech 86:45–50CrossRef Andrés D, Lorenzo M, Lacalle R, Álvarez JA, Alegre JM (2016) Application of the small punch creep test to predict times to rupture on magnesium alloys. Theor Appl Fract Mech 86:45–50CrossRef
48.
go back to reference Lacalle R, Álvarez JA, GutiÉRrez-Solana F (2008) Analysis of key factors for the interpretation of small punch test results. Fatigue Fract Eng Mater Struct 31(10):841–849CrossRef Lacalle R, Álvarez JA, GutiÉRrez-Solana F (2008) Analysis of key factors for the interpretation of small punch test results. Fatigue Fract Eng Mater Struct 31(10):841–849CrossRef
49.
go back to reference Bruchhausen M, Altstadt E, Austin T, Dymacek P, Holmström S, Jeffs S, Lacalle R, Lancaster R, Matocha K, Petzová J (2018) European standard on small punch testing of metallic materials. Ubiquity Proc 1:11CrossRef Bruchhausen M, Altstadt E, Austin T, Dymacek P, Holmström S, Jeffs S, Lacalle R, Lancaster R, Matocha K, Petzová J (2018) European standard on small punch testing of metallic materials. Ubiquity Proc 1:11CrossRef
50.
go back to reference Karthik V, Visweswaran P, Vijayraghavan A, Kasiviswanathan KV, Raj B (2009) Tensile–shear correlations obtained from shear punch test technique using a modified experimental approach. J Nucl Mater 393(3):425–432CrossRef Karthik V, Visweswaran P, Vijayraghavan A, Kasiviswanathan KV, Raj B (2009) Tensile–shear correlations obtained from shear punch test technique using a modified experimental approach. J Nucl Mater 393(3):425–432CrossRef
51.
go back to reference Kopriva R, Brumovsky M, Kytka M, Lasan M, Siegl J, and Matocha K (2015) Application of miniature small punch test specimen in determination of tensile properties. In: Small specimen test techniques. ASTM International, West Conshohocken, PA Kopriva R, Brumovsky M, Kytka M, Lasan M, Siegl J, and Matocha K (2015) Application of miniature small punch test specimen in determination of tensile properties. In: Small specimen test techniques. ASTM International, West Conshohocken, PA
52.
go back to reference Milička K, Dobeš F (2006) Small punch testing of P91 steel. Int J Press Vessels Pip 83(9):625–634CrossRef Milička K, Dobeš F (2006) Small punch testing of P91 steel. Int J Press Vessels Pip 83(9):625–634CrossRef
53.
go back to reference Jeffs SP, Lancaster RJ (2015) Elevated temperature creep deformation of a single crystal superalloy through the small punch creep method. Mater Sci Eng, A 626:330–337CrossRef Jeffs SP, Lancaster RJ (2015) Elevated temperature creep deformation of a single crystal superalloy through the small punch creep method. Mater Sci Eng, A 626:330–337CrossRef
54.
go back to reference Matocha K, Kander L, Filip M, Dorazil O, Guan K, Xu Y (2014) the effect of stiffness of the loading system on determination of tensile characteristics from the results of small punch tests. Acta Metall Slovaca 20(4):389–396CrossRef Matocha K, Kander L, Filip M, Dorazil O, Guan K, Xu Y (2014) the effect of stiffness of the loading system on determination of tensile characteristics from the results of small punch tests. Acta Metall Slovaca 20(4):389–396CrossRef
55.
go back to reference Abendroth M, Zielke H (2018) Numerical investigation of the influence of friction in SPT experiments. Ubiquity Proc 1:1CrossRef Abendroth M, Zielke H (2018) Numerical investigation of the influence of friction in SPT experiments. Ubiquity Proc 1:1CrossRef
56.
go back to reference Lucon E, Lucon E, Benzing J, Hrabe N (2020) Development and validation of small punch testing at NIST. US Department of Commerce National Institute of Standards and Technology, GaithersburgCrossRef Lucon E, Lucon E, Benzing J, Hrabe N (2020) Development and validation of small punch testing at NIST. US Department of Commerce National Institute of Standards and Technology, GaithersburgCrossRef
57.
go back to reference Foulds JR, Woytowitz PJ, Parnell TK, Jewett CW (1995) Fracture toughness by small punch testing. J Test Eval 23(1):3–10CrossRef Foulds JR, Woytowitz PJ, Parnell TK, Jewett CW (1995) Fracture toughness by small punch testing. J Test Eval 23(1):3–10CrossRef
58.
go back to reference Janča A, Siegl J, Haušild P (2016) Small punch test evaluation methods for material characterisation. J Nucl Mater 481:201–213CrossRef Janča A, Siegl J, Haušild P (2016) Small punch test evaluation methods for material characterisation. J Nucl Mater 481:201–213CrossRef
59.
go back to reference Rodríguez C, Cuesta II, Maspoch ML, Belzunce FJ (2016) Application of the miniature small punch test for the mechanical characterization of polymer materials. Theor Appl Fract Mech 86:78–83CrossRef Rodríguez C, Cuesta II, Maspoch ML, Belzunce FJ (2016) Application of the miniature small punch test for the mechanical characterization of polymer materials. Theor Appl Fract Mech 86:78–83CrossRef
60.
go back to reference García TE, Rodríguez C, Belzunce FJ, Suárez C (2014) Estimation of the mechanical properties of metallic materials by means of the small punch test. J Alloy Compd 582:708–717CrossRef García TE, Rodríguez C, Belzunce FJ, Suárez C (2014) Estimation of the mechanical properties of metallic materials by means of the small punch test. J Alloy Compd 582:708–717CrossRef
61.
go back to reference Simonovski I, Holmström S, Bruchhausen M (2017) Small punch tensile testing of curved specimens: finite element analysis and experiment. Int J Mech Sci 120:204–213CrossRef Simonovski I, Holmström S, Bruchhausen M (2017) Small punch tensile testing of curved specimens: finite element analysis and experiment. Int J Mech Sci 120:204–213CrossRef
62.
go back to reference Mao X, Takahashi H (1987) Development of a further-miniaturized specimen of 3 mm diameter for TEM disk small punch tests. J Nucl Mater 150(1):42–52CrossRef Mao X, Takahashi H (1987) Development of a further-miniaturized specimen of 3 mm diameter for TEM disk small punch tests. J Nucl Mater 150(1):42–52CrossRef
63.
go back to reference Cuesta II, Alegre JM, Lorenzo M (2014) Influence of strain state in mechanical behaviour of aluminium alloys using the small punch test. Mater Des 54:291–294CrossRef Cuesta II, Alegre JM, Lorenzo M (2014) Influence of strain state in mechanical behaviour of aluminium alloys using the small punch test. Mater Des 54:291–294CrossRef
64.
go back to reference Isselin J, Shoji T (2009) Yield strength evaluation by small-punch test. J Test Eval 37(6):531–537 Isselin J, Shoji T (2009) Yield strength evaluation by small-punch test. J Test Eval 37(6):531–537
65.
go back to reference Eskner M, Sandstrom R (2004) Mechanical property evaluation using the small punch test. J Test Eval 32(4):282–289CrossRef Eskner M, Sandstrom R (2004) Mechanical property evaluation using the small punch test. J Test Eval 32(4):282–289CrossRef
66.
go back to reference Lacalle R, García J, Álvarez J, Gutiérrez-Solana F (2009) Obtención mediante el ensayo small punch de las propiedades de tracción de materiales metálicos. An Mec Fract 26:501–506 Lacalle R, García J, Álvarez J, Gutiérrez-Solana F (2009) Obtención mediante el ensayo small punch de las propiedades de tracción de materiales metálicos. An Mec Fract 26:501–506
67.
go back to reference Contreras MA, RodrÍGuez C, Belzunce FJ, BetegÓN C (2008) Use of the small punch test to determine the ductile-to-brittle transition temperature of structural steels. Fatigue Fract Eng Mater Struct 31(9):727–737CrossRef Contreras MA, RodrÍGuez C, Belzunce FJ, BetegÓN C (2008) Use of the small punch test to determine the ductile-to-brittle transition temperature of structural steels. Fatigue Fract Eng Mater Struct 31(9):727–737CrossRef
68.
go back to reference Kamaya M (2018) Numerical investigations of small punch tests for determining tensile properties. Ubiquity Proc 1(S1) Kamaya M (2018) Numerical investigations of small punch tests for determining tensile properties. Ubiquity Proc 1(S1)
69.
go back to reference Kim MC, Lee JB, Kim MW, Lee BS (2007) Empirical correlation between parameters from small punch and tensile curves of Mn-Mo-Ni low alloy steels by using test and FE analysis. Key Eng Mater 353:420–423CrossRef Kim MC, Lee JB, Kim MW, Lee BS (2007) Empirical correlation between parameters from small punch and tensile curves of Mn-Mo-Ni low alloy steels by using test and FE analysis. Key Eng Mater 353:420–423CrossRef
70.
go back to reference Cuesta II, Rodríguez C, García TE, Alegre JM (2015) Effect of confinement level on mechanical behaviour using the small punch test. Eng Fail Anal 58(1):206–211CrossRef Cuesta II, Rodríguez C, García TE, Alegre JM (2015) Effect of confinement level on mechanical behaviour using the small punch test. Eng Fail Anal 58(1):206–211CrossRef
71.
go back to reference Tantideeravit S, Kamaya M (2020) An application of FEM in the determination of tensile properties for work-hardened carbon steel by means of small punch test. Results Mater 8:100142CrossRef Tantideeravit S, Kamaya M (2020) An application of FEM in the determination of tensile properties for work-hardened carbon steel by means of small punch test. Results Mater 8:100142CrossRef
72.
go back to reference Calaf-Chica J, Bravo Díez PM, Preciado Calzada M, Garcia-Tarrago M-J (2020) Optimization of the t/10 offset correlation method to obtain the yield strength with the small punch test. J Nucl Mater 534:152177CrossRef Calaf-Chica J, Bravo Díez PM, Preciado Calzada M, Garcia-Tarrago M-J (2020) Optimization of the t/10 offset correlation method to obtain the yield strength with the small punch test. J Nucl Mater 534:152177CrossRef
73.
go back to reference Calaf-Chica J, Bravo Díez PM, Preciado Calzada M, Ballorca-Juez D (2019) A systematic FEM analysis of the influence of mechanical properties in the reliability of the correlation methods in the small punch test. Int J Mech Sci 153–154:299–309CrossRef Calaf-Chica J, Bravo Díez PM, Preciado Calzada M, Ballorca-Juez D (2019) A systematic FEM analysis of the influence of mechanical properties in the reliability of the correlation methods in the small punch test. Int J Mech Sci 153–154:299–309CrossRef
74.
go back to reference Bravo Díez PM, Preciado Calzada M, Cárdenas Gonzalo D, Calaf Chica J (2016) Change of mechanical properties of AM60B alloy with heat treatments and its correlation with small punch tests. Theor Appl Fract Mech 86:101–108CrossRef Bravo Díez PM, Preciado Calzada M, Cárdenas Gonzalo D, Calaf Chica J (2016) Change of mechanical properties of AM60B alloy with heat treatments and its correlation with small punch tests. Theor Appl Fract Mech 86:101–108CrossRef
75.
go back to reference Kumar K, Pooleery A, Madhusoodanan K, Singh RN, Chakravartty JK, Shriwastaw RS, Dutta BK, Sinha RK (2015) Evaluation of ultimate tensile strength using miniature disk bend test. J Nucl Mater 461:100–111CrossRef Kumar K, Pooleery A, Madhusoodanan K, Singh RN, Chakravartty JK, Shriwastaw RS, Dutta BK, Sinha RK (2015) Evaluation of ultimate tensile strength using miniature disk bend test. J Nucl Mater 461:100–111CrossRef
76.
go back to reference Altstadt E, Houska M, Simonovski I, Bruchhausen M, Holmström S, Lacalle R (2018) On the estimation of ultimate tensile stress from small punch testing. Int J Mech Sci 136:85–93CrossRef Altstadt E, Houska M, Simonovski I, Bruchhausen M, Holmström S, Lacalle R (2018) On the estimation of ultimate tensile stress from small punch testing. Int J Mech Sci 136:85–93CrossRef
77.
go back to reference Kumar P, Dutta BK, Chattopadhyay J, Shriwastaw RS (2016) Numerical evaluation of J-R curve using small punch test data. Theoret Appl Fract Mech 86:292–300CrossRef Kumar P, Dutta BK, Chattopadhyay J, Shriwastaw RS (2016) Numerical evaluation of J-R curve using small punch test data. Theoret Appl Fract Mech 86:292–300CrossRef
78.
go back to reference Auricchio F, Taylor RL (1994) A generalized elastoplastic plate theory and its algorithmic implementation. Int J Numer Meth Eng 37(15):2583–2608CrossRef Auricchio F, Taylor RL (1994) A generalized elastoplastic plate theory and its algorithmic implementation. Int J Numer Meth Eng 37(15):2583–2608CrossRef
79.
go back to reference Cuesta II, Rodriquez C, Belzunce FJ, Alegre JM (2011) Analysis of different techniques for obtaining pre-cracked/notched small punch test specimens. Eng Fail Anal 18(8):2282–2287CrossRef Cuesta II, Rodriquez C, Belzunce FJ, Alegre JM (2011) Analysis of different techniques for obtaining pre-cracked/notched small punch test specimens. Eng Fail Anal 18(8):2282–2287CrossRef
80.
go back to reference Bhavikatti SS (2012) Theory of plates and shells. New Age International, New Delhi Bhavikatti SS (2012) Theory of plates and shells. New Age International, New Delhi
81.
go back to reference Giddings VL, Kurtz SM, Jewett CW, Foulds JR, Edidin AA (2001) A small punch test technique for characterizing the elastic modulus and fracture behavior of PMMA bone cement used in total joint replacement. Biomaterials 22(13):1875–1881CrossRef Giddings VL, Kurtz SM, Jewett CW, Foulds JR, Edidin AA (2001) A small punch test technique for characterizing the elastic modulus and fracture behavior of PMMA bone cement used in total joint replacement. Biomaterials 22(13):1875–1881CrossRef
82.
go back to reference Fleury E, Ha JS (1998) Small punch tests to estimate the mechanical properties of steels for steam power plant: I. Mechanical strength. Int J Press Vessels Pip 75(9):699–706CrossRef Fleury E, Ha JS (1998) Small punch tests to estimate the mechanical properties of steels for steam power plant: I. Mechanical strength. Int J Press Vessels Pip 75(9):699–706CrossRef
83.
go back to reference Chica JC, Bravo Díez PM, Preciado Calzada M (2017) Improved correlation for elastic modulus prediction of metallic materials in the small punch test. Int J Mech Sci 134:112–122CrossRef Chica JC, Bravo Díez PM, Preciado Calzada M (2017) Improved correlation for elastic modulus prediction of metallic materials in the small punch test. Int J Mech Sci 134:112–122CrossRef
84.
go back to reference Rodríguez C, Fernández M, Cabezas J, García TE, Belzunce FJ (2016) The use of the small punch test to solve practical engineering problems. Theor Appl Fract Mech 86:109–116CrossRef Rodríguez C, Fernández M, Cabezas J, García TE, Belzunce FJ (2016) The use of the small punch test to solve practical engineering problems. Theor Appl Fract Mech 86:109–116CrossRef
85.
go back to reference Lindqvist B (1989) Influence of microstructure and porosity on fatigue properties of sintered steels. Met Powder Rep 44(6):443–448 Lindqvist B (1989) Influence of microstructure and porosity on fatigue properties of sintered steels. Met Powder Rep 44(6):443–448
86.
go back to reference Engström U, Larsson C, Frykholm R (2011) Cost effective materials for heat treated gear applications. EURO PM2011, Barcelona Engström U, Larsson C, Frykholm R (2011) Cost effective materials for heat treated gear applications. EURO PM2011, Barcelona
87.
go back to reference Parker, J. and J. James (1993) Disc-bend creep deformation behaviour of 0. 5 Cr 0. 5 Mo 0. 25 V low alloy steel. Creep Fract Eng Mater Struct 651–660 Parker, J. and J. James (1993) Disc-bend creep deformation behaviour of 0. 5 Cr 0. 5 Mo 0. 25 V low alloy steel. Creep Fract Eng Mater Struct 651–660
88.
go back to reference Dobeš F, Milička K (2008) Comparison of conventional and small punch creep tests of mechanically alloyed Al–C–O alloys. Mater Charact 59(7):961–964CrossRef Dobeš F, Milička K (2008) Comparison of conventional and small punch creep tests of mechanically alloyed Al–C–O alloys. Mater Charact 59(7):961–964CrossRef
89.
go back to reference Dobeš F, Milička K (2002) On the monkman-grant relation for small punch test data. Mater Sci Eng, A 336(1–2):245–248CrossRef Dobeš F, Milička K (2002) On the monkman-grant relation for small punch test data. Mater Sci Eng, A 336(1–2):245–248CrossRef
90.
go back to reference Hou F, Xu H, Wang Y, Zhang L (2013) Determination of creep property of 1.25Cr0.5Mo pearlitic steels by small punch test. Eng Fail Anal 28:215–221CrossRef Hou F, Xu H, Wang Y, Zhang L (2013) Determination of creep property of 1.25Cr0.5Mo pearlitic steels by small punch test. Eng Fail Anal 28:215–221CrossRef
91.
go back to reference Zhou Z, Zheng Y, Ling X, Hu R, Zhou J (2010) A study on influence factors of small punch creep test by experimental investigation and finite element analysis. Mater Sci Eng A 527(10–11):2784–2789CrossRef Zhou Z, Zheng Y, Ling X, Hu R, Zhou J (2010) A study on influence factors of small punch creep test by experimental investigation and finite element analysis. Mater Sci Eng A 527(10–11):2784–2789CrossRef
92.
go back to reference Lee T, Ibupoto FA, Lee JH, Kim BJ, Kim MK (2016) A direct methodology for small punch creep test. Exp Mech 56(3):395–405CrossRef Lee T, Ibupoto FA, Lee JH, Kim BJ, Kim MK (2016) A direct methodology for small punch creep test. Exp Mech 56(3):395–405CrossRef
93.
go back to reference Andrés D, Dymacek P, Lacalle R, Álvarez J (2017) Influence of the upper die and of the indenter material on the time to rupture of small punch creep tests. Key Eng Mater 734:119–127CrossRef Andrés D, Dymacek P, Lacalle R, Álvarez J (2017) Influence of the upper die and of the indenter material on the time to rupture of small punch creep tests. Key Eng Mater 734:119–127CrossRef
94.
go back to reference Al-Abedy H, Jones IA, Sun W (2018) FE modelling of small punch creep test using Kocks-Mecking-Estrin model. Ubiquity Proc 1:3CrossRef Al-Abedy H, Jones IA, Sun W (2018) FE modelling of small punch creep test using Kocks-Mecking-Estrin model. Ubiquity Proc 1:3CrossRef
95.
go back to reference Andrés D, Dymáček P, Lacalle R, and Álvarez JA (2016) Influence of different factors on the small punch creep test. In: 4th international small sample test technique. Shanghai Andrés D, Dymáček P, Lacalle R, and Álvarez JA (2016) Influence of different factors on the small punch creep test. In: 4th international small sample test technique. Shanghai
96.
go back to reference Nakata T, Komazaki S, Kohno Y, Tanigawa H (2017) Effects of geometry and dimension of specimen and rig on small punch creep property. Exp Mech 57(3):487–494CrossRef Nakata T, Komazaki S, Kohno Y, Tanigawa H (2017) Effects of geometry and dimension of specimen and rig on small punch creep property. Exp Mech 57(3):487–494CrossRef
97.
go back to reference Dawson H, Richardson M, Gorley M, Surrey E (2018) The effect of testing environment on small punch creep. Ubiquity Proc 1:15CrossRef Dawson H, Richardson M, Gorley M, Surrey E (2018) The effect of testing environment on small punch creep. Ubiquity Proc 1:15CrossRef
98.
go back to reference Dobeš F, Milička K (2009) Application of creep small punch testing in assessment of creep lifetime. Mater Sci Eng A 510–511:440–443CrossRef Dobeš F, Milička K (2009) Application of creep small punch testing in assessment of creep lifetime. Mater Sci Eng A 510–511:440–443CrossRef
99.
go back to reference Chakrabarty J (1970) A theory of stretch forming over hemispherical punch heads. Int J Mech Sci 12(4):315–325CrossRef Chakrabarty J (1970) A theory of stretch forming over hemispherical punch heads. Int J Mech Sci 12(4):315–325CrossRef
100.
go back to reference Yang Z, Wang Z-W (2003) Relationship between strain and central deflection in small punch creep specimens. Int J Press Vessels Pip 80(6):397–404CrossRef Yang Z, Wang Z-W (2003) Relationship between strain and central deflection in small punch creep specimens. Int J Press Vessels Pip 80(6):397–404CrossRef
101.
go back to reference Hyde TH, Sun W, Williams JA (2007) Requirements for and use of miniature test specimens to provide mechanical and creep properties of materials: a review. Int Mater Rev 52(4):213–255CrossRef Hyde TH, Sun W, Williams JA (2007) Requirements for and use of miniature test specimens to provide mechanical and creep properties of materials: a review. Int Mater Rev 52(4):213–255CrossRef
102.
go back to reference Bruchhausen M, Turba K, de Haan F, Hähner P, Austin T, de Carlan Y (2014) Characterization of a 14Cr ODS steel by means of small punch and uniaxial testing with regard to creep and fatigue at elevated temperatures. J Nucl Mater 444(1–3):283–291CrossRef Bruchhausen M, Turba K, de Haan F, Hähner P, Austin T, de Carlan Y (2014) Characterization of a 14Cr ODS steel by means of small punch and uniaxial testing with regard to creep and fatigue at elevated temperatures. J Nucl Mater 444(1–3):283–291CrossRef
103.
go back to reference Ling X, Zheng Y, You Y, Chen Y (2007) Creep damage in small punch creep specimens of type 304 stainless steel. Int J Press Vessels Pip 84(5):304–309CrossRef Ling X, Zheng Y, You Y, Chen Y (2007) Creep damage in small punch creep specimens of type 304 stainless steel. Int J Press Vessels Pip 84(5):304–309CrossRef
104.
go back to reference Dobeš F, Dymáček P (2017) Estimation of anisotropy of creep properties in al and mg alloys by means of small punch test. Key Eng Mater 734:137–143CrossRef Dobeš F, Dymáček P (2017) Estimation of anisotropy of creep properties in al and mg alloys by means of small punch test. Key Eng Mater 734:137–143CrossRef
105.
go back to reference Wen C, Xu T, Guan K (2016) Correlation factor study of small punch creep test and its life prediction. Materials 9(10):796CrossRef Wen C, Xu T, Guan K (2016) Correlation factor study of small punch creep test and its life prediction. Materials 9(10):796CrossRef
106.
go back to reference Holmström S, Auerkari P, Hurst R, Blagoeva D (2013) Using small punch test data to determine creep strain and strength reduction properties for heat affected zones. Mater Sci Technol 30(1):63–66CrossRef Holmström S, Auerkari P, Hurst R, Blagoeva D (2013) Using small punch test data to determine creep strain and strength reduction properties for heat affected zones. Mater Sci Technol 30(1):63–66CrossRef
107.
go back to reference Budzakoska E, Carr DG, Stathers PA, Li H, Harrison RP, Hellier AK, Yeung WY (2007) Predicting the J integral fracture toughness of Al 6061 using the small punch test. Fatigue Fract Eng Mater Struct 30(9):796–807CrossRef Budzakoska E, Carr DG, Stathers PA, Li H, Harrison RP, Hellier AK, Yeung WY (2007) Predicting the J integral fracture toughness of Al 6061 using the small punch test. Fatigue Fract Eng Mater Struct 30(9):796–807CrossRef
108.
go back to reference Mao X, Takahashi H, Kodaira T (1992) Supersmall punch test to estimate fracture toughness JIc and its application to radiation embrittlement of 22.5Cr-1Mo steel. Mater Sci Eng A 150(2):231–236CrossRef Mao X, Takahashi H, Kodaira T (1992) Supersmall punch test to estimate fracture toughness JIc and its application to radiation embrittlement of 22.5Cr-1Mo steel. Mater Sci Eng A 150(2):231–236CrossRef
109.
go back to reference Guan K, Hua L, Wang Q, Zou X, Song M (2011) Assessment of toughness in long term service CrMo low alloy steel by fracture toughness and small punch test. Nucl Eng Des 241(5):1407–1413CrossRef Guan K, Hua L, Wang Q, Zou X, Song M (2011) Assessment of toughness in long term service CrMo low alloy steel by fracture toughness and small punch test. Nucl Eng Des 241(5):1407–1413CrossRef
110.
go back to reference Suzuki M, Eto M, Nishiyama Y, Fukaya K, Saito M, Misawa T (1992) Small specimen test techniques for the evaluation of toughness degradation. J Nucl Mater 191:1023–1027CrossRef Suzuki M, Eto M, Nishiyama Y, Fukaya K, Saito M, Misawa T (1992) Small specimen test techniques for the evaluation of toughness degradation. J Nucl Mater 191:1023–1027CrossRef
111.
go back to reference Lee WK, Metzger DR, Donner A, Lepik OE (1998) The use of a small punch test procedure to determine mechanical properties. In: Small specimen test techniques. ASTM International, West Conshohocken Lee WK, Metzger DR, Donner A, Lepik OE (1998) The use of a small punch test procedure to determine mechanical properties. In: Small specimen test techniques. ASTM International, West Conshohocken
112.
go back to reference Geary W and Dutton JT (1998) The prediction of fracture toughness properties from 3MM diameter punch discs. In: Small specimen test techniques. ASTM International, West Conshohocken Geary W and Dutton JT (1998) The prediction of fracture toughness properties from 3MM diameter punch discs. In: Small specimen test techniques. ASTM International, West Conshohocken
113.
go back to reference Mao X, Saito M, Takahashi H (1991) Small punch test to predict ductile fracture toughness JIC and brittle fracture toughness KIC. Scr Metall Mater 25(11):2481–2485CrossRef Mao X, Saito M, Takahashi H (1991) Small punch test to predict ductile fracture toughness JIC and brittle fracture toughness KIC. Scr Metall Mater 25(11):2481–2485CrossRef
114.
go back to reference Wang Z-X, Shi H-J, Lu J, Shi P, Ma X-F (2008) Small punch testing for assessing the fracture properties of the reactor vessel steel with different thicknesses. Nucl Eng Des 238(12):3186–3193CrossRef Wang Z-X, Shi H-J, Lu J, Shi P, Ma X-F (2008) Small punch testing for assessing the fracture properties of the reactor vessel steel with different thicknesses. Nucl Eng Des 238(12):3186–3193CrossRef
115.
go back to reference Kumar P, Chattopadhyay J, Dutta BK (2016) On the correlation between minimum thickness and central deflection during small punch test. J Nucl Mater 475:37–45CrossRef Kumar P, Chattopadhyay J, Dutta BK (2016) On the correlation between minimum thickness and central deflection during small punch test. J Nucl Mater 475:37–45CrossRef
116.
go back to reference Joo Y, Hashida T, Takahashi H, Shimomura K (1992) The use of small punch (Bulge) tests to estimate fracture stress in the lower shelf regime. J Test Eval 20(5):336–342CrossRef Joo Y, Hashida T, Takahashi H, Shimomura K (1992) The use of small punch (Bulge) tests to estimate fracture stress in the lower shelf regime. J Test Eval 20(5):336–342CrossRef
117.
go back to reference Afzal Khan M, Nazeer MM, Naeem A, Atkins AG (1995) Computer modeling of elasto-plastic fracture mechanics of ball indentation in ductile aluminium sheet. In: Euro-mat 95 conference, symposium D. Padova, Italy Afzal Khan M, Nazeer MM, Naeem A, Atkins AG (1995) Computer modeling of elasto-plastic fracture mechanics of ball indentation in ductile aluminium sheet. In: Euro-mat 95 conference, symposium D. Padova, Italy
118.
go back to reference Ju J-B, Jang J-I, Kwon D (2003) Evaluation of fracture toughness by small-punch testing techniques using sharp notched specimens. Int J Press Vessels Pip 80(4):221–228CrossRef Ju J-B, Jang J-I, Kwon D (2003) Evaluation of fracture toughness by small-punch testing techniques using sharp notched specimens. Int J Press Vessels Pip 80(4):221–228CrossRef
119.
go back to reference Tanaka K, Amita T, Satou T, Koba K, Kusumoto J, Kanaya A (2009) Evaluation on high temperature fracture toughness of CrMoV cast steel by small punch testing. Int J Press Vessels Pip 86(9):643–648CrossRef Tanaka K, Amita T, Satou T, Koba K, Kusumoto J, Kanaya A (2009) Evaluation on high temperature fracture toughness of CrMoV cast steel by small punch testing. Int J Press Vessels Pip 86(9):643–648CrossRef
120.
go back to reference ASTM (2012) ASTM E399–12e3, standard test method for linear-elastic plane-strain fracture toughness kic of metallic materials. ASTM International, West Conshohocken, PA ASTM (2012) ASTM E399–12e3, standard test method for linear-elastic plane-strain fracture toughness kic of metallic materials. ASTM International, West Conshohocken, PA
121.
go back to reference Standards T.S.o.F.M.T. (1992) ESIS P2–92, procedure for determining the fracture behaviour of materials. European Structural Integrity Society, Delft, The Netherlands Standards T.S.o.F.M.T. (1992) ESIS P2–92, procedure for determining the fracture behaviour of materials. European Structural Integrity Society, Delft, The Netherlands
122.
go back to reference Lacalle R, Álvarez JA, Gutiérrez-Solana F (2008) Use of small punch notched specimens in the determination of fracture toughness. In: ASME 2008 pressure vessels and piping conference. American Society of Mechanical Engineers, New York Lacalle R, Álvarez JA, Gutiérrez-Solana F (2008) Use of small punch notched specimens in the determination of fracture toughness. In: ASME 2008 pressure vessels and piping conference. American Society of Mechanical Engineers, New York
123.
go back to reference Alegre JM, Lacalle R, Cuesta II, Álvarez JA (2016) Different methodologies to obtain the fracture properties of metallic materials using pre-notched small punch test specimens. Theor Appl Fract Mech 86:11–18CrossRef Alegre JM, Lacalle R, Cuesta II, Álvarez JA (2016) Different methodologies to obtain the fracture properties of metallic materials using pre-notched small punch test specimens. Theor Appl Fract Mech 86:11–18CrossRef
124.
go back to reference Turba K, Gülçimen B, Li YZ, Blagoeva D, Hähner P, Hurst RC (2011) Introduction of a new notched specimen geometry to determine fracture properties by small punch testing. Eng Fract Mech 78(16):2826–2833CrossRef Turba K, Gülçimen B, Li YZ, Blagoeva D, Hähner P, Hurst RC (2011) Introduction of a new notched specimen geometry to determine fracture properties by small punch testing. Eng Fract Mech 78(16):2826–2833CrossRef
125.
go back to reference Cuesta II, Alegre JM (2011) Determination of the fracture toughness by applying a structural integrity approach to pre-cracked small punch test specimens. Eng Fract Mech 78(2):289–300CrossRef Cuesta II, Alegre JM (2011) Determination of the fracture toughness by applying a structural integrity approach to pre-cracked small punch test specimens. Eng Fract Mech 78(2):289–300CrossRef
126.
go back to reference Álvarez G, Rodríguez C, Belzunce FJ, García TE (2020) Use of notched small punch test specimens for the determination of fracture properties in structural steels. Theoret Appl Fract Mech 106:102442CrossRef Álvarez G, Rodríguez C, Belzunce FJ, García TE (2020) Use of notched small punch test specimens for the determination of fracture properties in structural steels. Theoret Appl Fract Mech 106:102442CrossRef
127.
go back to reference Martínez-Pañeda E, Cuesta II, Peñuelas I, Díaz A, Alegre JM (2016) Damage modeling in small punch test specimens. Theor Appl Fract Mech 86:51–60CrossRef Martínez-Pañeda E, Cuesta II, Peñuelas I, Díaz A, Alegre JM (2016) Damage modeling in small punch test specimens. Theor Appl Fract Mech 86:51–60CrossRef
128.
go back to reference Wang W, Zhong J, Zhang X, Jiang T, Guan K (2020) Study of estimation of ductile-brittle transition temperature using U-notched small punch test specimens. Theor Appl Fract Mech 108:102627CrossRef Wang W, Zhong J, Zhang X, Jiang T, Guan K (2020) Study of estimation of ductile-brittle transition temperature using U-notched small punch test specimens. Theor Appl Fract Mech 108:102627CrossRef
129.
go back to reference Guan K, Wang D, Dobrovská J, Matocha K (2019) Evaluation of the ductile-brittle transition temperature of anisotropic materials by small punch test with un-notched and U-notched specimens. Theor Appl Fract Mech 102:98–102CrossRef Guan K, Wang D, Dobrovská J, Matocha K (2019) Evaluation of the ductile-brittle transition temperature of anisotropic materials by small punch test with un-notched and U-notched specimens. Theor Appl Fract Mech 102:98–102CrossRef
130.
go back to reference Shikalgar TD, Dutta BK, Chattopadhyay J (2019) Determination of J-initiation toughness using pre-cracked small punch test specimens. Procedia Struct Integr 14:529–536CrossRef Shikalgar TD, Dutta BK, Chattopadhyay J (2019) Determination of J-initiation toughness using pre-cracked small punch test specimens. Procedia Struct Integr 14:529–536CrossRef
131.
go back to reference Van Erp LMA, Díaz A, Cuesta II (2019) Fracture analysis of a series 5000 aluminium-magnesium alloy during small punch tests using pre-notched and pre-holed specimens. Theor Appl Fract Mech 103:102271CrossRef Van Erp LMA, Díaz A, Cuesta II (2019) Fracture analysis of a series 5000 aluminium-magnesium alloy during small punch tests using pre-notched and pre-holed specimens. Theor Appl Fract Mech 103:102271CrossRef
132.
go back to reference Misawa T, Nagata S, Aoki N, Ishizaka J, Hamaguchi Y (1989) Fracture toughness evaluation of fusion reactor structural steels at low temperatures by small punch tests. J Nucl Mater 169:225–232CrossRef Misawa T, Nagata S, Aoki N, Ishizaka J, Hamaguchi Y (1989) Fracture toughness evaluation of fusion reactor structural steels at low temperatures by small punch tests. J Nucl Mater 169:225–232CrossRef
133.
go back to reference Abendroth M, Soltysiak S (2016) Assessment of material properties by means of the small punch test. In: Hütter G, Zybell L (eds) Recent trends in fracture and damage mechanics. Springer, New York, pp 127–157CrossRef Abendroth M, Soltysiak S (2016) Assessment of material properties by means of the small punch test. In: Hütter G, Zybell L (eds) Recent trends in fracture and damage mechanics. Springer, New York, pp 127–157CrossRef
134.
go back to reference Bulloch JH (2004) A study concerning material fracture toughness and some small punch test data for low alloy steels. Eng Fail Anal 11(4):635–653CrossRef Bulloch JH (2004) A study concerning material fracture toughness and some small punch test data for low alloy steels. Eng Fail Anal 11(4):635–653CrossRef
135.
go back to reference Abendroth M, Kuna M (2006) Identification of ductile damage and fracture parameters from the small punch test using neural networks. Eng Fract Mech 73(6):710–725CrossRef Abendroth M, Kuna M (2006) Identification of ductile damage and fracture parameters from the small punch test using neural networks. Eng Fract Mech 73(6):710–725CrossRef
136.
go back to reference Abendroth M, Kuna M (2004) Determination of ductile material properties by means of the small punch test and neural networks. Adv Eng Mater 6:536–540CrossRef Abendroth M, Kuna M (2004) Determination of ductile material properties by means of the small punch test and neural networks. Adv Eng Mater 6:536–540CrossRef
137.
go back to reference Baik J-M, Kameda J, Buck O (1983) Small punch test evaluation of intergranular embrittlement of an alloy steel. Scr Metall 17(12):1443–1447CrossRef Baik J-M, Kameda J, Buck O (1983) Small punch test evaluation of intergranular embrittlement of an alloy steel. Scr Metall 17(12):1443–1447CrossRef
138.
go back to reference Misawa T, Adachi T, Saito M, Hamaguchi Y (1987) Small punch tests for evaluating ductile-brittle transition behavior of irradiated ferritic steels. J Nucl Mater 150(2):194–202CrossRef Misawa T, Adachi T, Saito M, Hamaguchi Y (1987) Small punch tests for evaluating ductile-brittle transition behavior of irradiated ferritic steels. J Nucl Mater 150(2):194–202CrossRef
139.
go back to reference Altstadt E, Bergner F, Houska M (2021) Use of the small punch test for the estimation of ductile-to-brittle transition temperature shift of irradiated steels. Nucl Mater Energy 26:100918CrossRef Altstadt E, Bergner F, Houska M (2021) Use of the small punch test for the estimation of ductile-to-brittle transition temperature shift of irradiated steels. Nucl Mater Energy 26:100918CrossRef
140.
go back to reference Yao CF, Dai Y (2021) DBTT shift of optifer-IX, eurofer 97 and MA956 steels after irradiation evaluated with small punch tests. J Nucl Mater 544:152725CrossRef Yao CF, Dai Y (2021) DBTT shift of optifer-IX, eurofer 97 and MA956 steels after irradiation evaluated with small punch tests. J Nucl Mater 544:152725CrossRef
141.
go back to reference Adamech M, Petzová J, Brezina M, Kapusňák M (2018) Using of SPT method for estimation of mechanical properties changes of RPV steels after irradiation in the Halden reactor. Ubiquity Proc 1:2CrossRef Adamech M, Petzová J, Brezina M, Kapusňák M (2018) Using of SPT method for estimation of mechanical properties changes of RPV steels after irradiation in the Halden reactor. Ubiquity Proc 1:2CrossRef
142.
go back to reference Kapusňák M, Petzová J, Brezina M, Adamech M (2018) Interim results of the reactor pressure vessel materials evaluation within the framework of the implemented advanced surveillance specimen programme. Ubiquity Proc 1:28CrossRef Kapusňák M, Petzová J, Brezina M, Adamech M (2018) Interim results of the reactor pressure vessel materials evaluation within the framework of the implemented advanced surveillance specimen programme. Ubiquity Proc 1:28CrossRef
143.
go back to reference Matsushita T, Saucedo ML, Yotsutsuji M, Shoji T, Takahashi H (1989) Correlation between a charpy V-notch impact test and a small punch test in ductile-brittle fracture mode transition behavior. Trans Jpn Soc Mech Eng Ser A 55(515):1619–1622CrossRef Matsushita T, Saucedo ML, Yotsutsuji M, Shoji T, Takahashi H (1989) Correlation between a charpy V-notch impact test and a small punch test in ductile-brittle fracture mode transition behavior. Trans Jpn Soc Mech Eng Ser A 55(515):1619–1622CrossRef
144.
go back to reference Kameda J (1986) A kinetic model for ductile-brittle fracture mode transition behavior. Acta Metall 34(12):2391–2398CrossRef Kameda J (1986) A kinetic model for ductile-brittle fracture mode transition behavior. Acta Metall 34(12):2391–2398CrossRef
145.
go back to reference Ha JS, Fleury E (1998) Small punch tests on steels for steam power plant(I). KSME Int J 12(5):818CrossRef Ha JS, Fleury E (1998) Small punch tests on steels for steam power plant(I). KSME Int J 12(5):818CrossRef
146.
go back to reference Bruchhausen M, Holmström S, Lapetite JM, Ripplinger S (2017) On the determination of the ductile to brittle transition temperature from small punch tests on Grade 91 ferritic-martensitic steel. Int J Press Vessels Pip 155:27–34CrossRef Bruchhausen M, Holmström S, Lapetite JM, Ripplinger S (2017) On the determination of the ductile to brittle transition temperature from small punch tests on Grade 91 ferritic-martensitic steel. Int J Press Vessels Pip 155:27–34CrossRef
147.
go back to reference Misawa T, Suzuki K, Saito M, Hamaguchi Y (1991) Determination of the minimum quantity of irradiated ferritic steel specimens for small punch DBTT testing. J Nucl Mater 179–181:421–424CrossRef Misawa T, Suzuki K, Saito M, Hamaguchi Y (1991) Determination of the minimum quantity of irradiated ferritic steel specimens for small punch DBTT testing. J Nucl Mater 179–181:421–424CrossRef
148.
go back to reference McNaney J, Lucas GE, Odette GR (1991) Application of ball punch tests to evaluating fracture mode transition in ferritic steels. J Nucl Mater 179–181:429–433CrossRef McNaney J, Lucas GE, Odette GR (1991) Application of ball punch tests to evaluating fracture mode transition in ferritic steels. J Nucl Mater 179–181:429–433CrossRef
149.
go back to reference Foulds J, Viswanathan R (2001) Determination of the toughness of in-service steam turbine disks using small punch testing. J Mater Eng Perform 10(5):614–619CrossRef Foulds J, Viswanathan R (2001) Determination of the toughness of in-service steam turbine disks using small punch testing. J Mater Eng Perform 10(5):614–619CrossRef
150.
go back to reference Foulds J, Viswanathan R (1994) Small punch testing for determining the material toughness of low alloy steel components in service. J Eng Mater Technol 116(4):457–464CrossRef Foulds J, Viswanathan R (1994) Small punch testing for determining the material toughness of low alloy steel components in service. J Eng Mater Technol 116(4):457–464CrossRef
151.
go back to reference Shekhter A, Croker ABL, Hellier AK, Moss CJ, Ringer SP (2000) Towards the correlation of fracture toughness in an ex-service power generating rotor. Int J Press Vessels Pip 77(2):113–116CrossRef Shekhter A, Croker ABL, Hellier AK, Moss CJ, Ringer SP (2000) Towards the correlation of fracture toughness in an ex-service power generating rotor. Int J Press Vessels Pip 77(2):113–116CrossRef
152.
go back to reference Gai X, Sato Y, Kokawa H, Ichikawa K (2002) Ductile-brittle transition of steel electron beam weld metal in small punch. Sci Technol Weld Join 7:204–211CrossRef Gai X, Sato Y, Kokawa H, Ichikawa K (2002) Ductile-brittle transition of steel electron beam weld metal in small punch. Sci Technol Weld Join 7:204–211CrossRef
153.
go back to reference Matocha, K., M. Filip, and S. Stejskalova (2012) Determination of critical temperature of brittleness Tk0 by small punch tests. In; COMAT 2012. Plzen Czech Republic Matocha, K., M. Filip, and S. Stejskalova (2012) Determination of critical temperature of brittleness Tk0 by small punch tests. In; COMAT 2012. Plzen Czech Republic
154.
go back to reference Jackson GA, Sun W, McCartney DG (2017) The application of the small punch tensile test to evaluate the ductile to brittle transition of a thermally sprayed CoNiCrAlY coating. Key Eng Mater 734:144–155CrossRef Jackson GA, Sun W, McCartney DG (2017) The application of the small punch tensile test to evaluate the ductile to brittle transition of a thermally sprayed CoNiCrAlY coating. Key Eng Mater 734:144–155CrossRef
155.
go back to reference Chen H, Yang J, Xiao X (2017) Evaluation of the ductile-to-brittle transition temperature in a thermally sprayed CoNiCrAlY coating by small punch multi-step loading tests. Proc Inst Mech Eng Part L J Mater Des Appl 231(1–2):6–13 Chen H, Yang J, Xiao X (2017) Evaluation of the ductile-to-brittle transition temperature in a thermally sprayed CoNiCrAlY coating by small punch multi-step loading tests. Proc Inst Mech Eng Part L J Mater Des Appl 231(1–2):6–13
156.
go back to reference Jackson GA, Sun W, McCartney DG (2019) The influence of microstructure on the ductile to brittle transition and fracture behaviour of HVOF NiCoCrAlY coatings determined via small punch tensile testing. Mater Sci Eng A 754:479–490CrossRef Jackson GA, Sun W, McCartney DG (2019) The influence of microstructure on the ductile to brittle transition and fracture behaviour of HVOF NiCoCrAlY coatings determined via small punch tensile testing. Mater Sci Eng A 754:479–490CrossRef
157.
go back to reference Altstadt E, Bergner F, Das A, Houska M (2019) Effect of anisotropic microstructure of ODS steels on small punch test results. Theor Appl Fract Mech 100:191–199CrossRef Altstadt E, Bergner F, Das A, Houska M (2019) Effect of anisotropic microstructure of ODS steels on small punch test results. Theor Appl Fract Mech 100:191–199CrossRef
158.
go back to reference Jayakumar M, Lucas GE (1984) The determination of flow distribution by analysis of indentation geometry. J Nucl Mater 122(1):840–844CrossRef Jayakumar M, Lucas GE (1984) The determination of flow distribution by analysis of indentation geometry. J Nucl Mater 122(1):840–844CrossRef
159.
go back to reference Lucas G, Odette G, Sheckherd J (1986) Shear punch and microhardness tests for strength and ductility measurements. In: The use of small-scale specimens for testing irradiated material. ASTM International, West Conshohocken, PA Lucas G, Odette G, Sheckherd J (1986) Shear punch and microhardness tests for strength and ductility measurements. In: The use of small-scale specimens for testing irradiated material. ASTM International, West Conshohocken, PA
160.
go back to reference Guduru RK, Darling KA, Kishore R, Scattergood RO, Koch CC, Murty KL (2005) Evaluation of mechanical properties using shear–punch testing. Mater Sci Eng A 395(1–2):307–314CrossRef Guduru RK, Darling KA, Kishore R, Scattergood RO, Koch CC, Murty KL (2005) Evaluation of mechanical properties using shear–punch testing. Mater Sci Eng A 395(1–2):307–314CrossRef
161.
go back to reference Toloczko MB, Hamilton ML, Lucas GE (2000) Ductility correlations between shear punch and uniaxial tensile test data. J Nucl Mater 283–287(2):987–991CrossRef Toloczko MB, Hamilton ML, Lucas GE (2000) Ductility correlations between shear punch and uniaxial tensile test data. J Nucl Mater 283–287(2):987–991CrossRef
162.
go back to reference Toloczko MB, Kurtz RJ, Hasegawa A, Abe K (2002) Shear punch tests performed using a new low compliance test fixture. J Nucl Mater 307–311(2):1619–1623CrossRef Toloczko MB, Kurtz RJ, Hasegawa A, Abe K (2002) Shear punch tests performed using a new low compliance test fixture. J Nucl Mater 307–311(2):1619–1623CrossRef
163.
go back to reference Hamilton ML, Toloczko MB, Lucas GE (1994) Recent progress in shear punch testing, in International symposium on miniaturized specimens for testing of irradiated materials. Pacific Northwest Lab, Julich, Germany, pp 46–58 Hamilton ML, Toloczko MB, Lucas GE (1994) Recent progress in shear punch testing, in International symposium on miniaturized specimens for testing of irradiated materials. Pacific Northwest Lab, Julich, Germany, pp 46–58
164.
go back to reference Toloczko MB, Abe K, Hamilton ML, Garner FA, Kurtz RJ (2000) The effect of test machine compliance on the measured shear punch yield stress as predicted using finite element analysis. Mater Trans JIM 41(10):1356–1359CrossRef Toloczko MB, Abe K, Hamilton ML, Garner FA, Kurtz RJ (2000) The effect of test machine compliance on the measured shear punch yield stress as predicted using finite element analysis. Mater Trans JIM 41(10):1356–1359CrossRef
166.
go back to reference Guduru RK, Scattergood RO, Koch CC, Murty KL, Nagasekhar AV (2006) Finite element analysis of a shear punch test. Metall Mater Trans A 37(5):1477–1483CrossRef Guduru RK, Scattergood RO, Koch CC, Murty KL, Nagasekhar AV (2006) Finite element analysis of a shear punch test. Metall Mater Trans A 37(5):1477–1483CrossRef
167.
go back to reference Ramaekers JAH, Kals JAG (1986) Strain, stresses and forces in blanking. Technische Hogeschool Eindhoven, Eindhoven Ramaekers JAH, Kals JAG (1986) Strain, stresses and forces in blanking. Technische Hogeschool Eindhoven, Eindhoven
168.
go back to reference Karthik V, Laha K, Parameswaran P, Chandravathi KS, Kasiviswanathan KV, Jayakumar T, Raj B (2011) Tensile properties of modified 9Cr-1Mo steel by shear punch testing and correlation with microstructures. Int J Press Vessels Pip 88(10):375–383CrossRef Karthik V, Laha K, Parameswaran P, Chandravathi KS, Kasiviswanathan KV, Jayakumar T, Raj B (2011) Tensile properties of modified 9Cr-1Mo steel by shear punch testing and correlation with microstructures. Int J Press Vessels Pip 88(10):375–383CrossRef
169.
go back to reference Karthik V, Kumar R, Vijayaragavan A, Venkiteswaran CN, Anandaraj V, Parameswaran P, Saroja S, Muralidharan NG, Joseph J, Kasiviswanathan KV, Jayakumar T, Raj B (2013) Characterization of mechanical properties and microstructure of highly irradiated SS 316. J Nucl Mater 439(1–3):224–231CrossRef Karthik V, Kumar R, Vijayaragavan A, Venkiteswaran CN, Anandaraj V, Parameswaran P, Saroja S, Muralidharan NG, Joseph J, Kasiviswanathan KV, Jayakumar T, Raj B (2013) Characterization of mechanical properties and microstructure of highly irradiated SS 316. J Nucl Mater 439(1–3):224–231CrossRef
170.
go back to reference Rabenberg EM, Jaques BJ, Sencer BH, Garner FA, Freyer PD, Okita T, Butt DP (2014) Mechanical behavior of AISI 304SS determined by miniature test methods after neutron irradiation to 28 dpa. J Nucl Mater 448(1–3):315–324CrossRef Rabenberg EM, Jaques BJ, Sencer BH, Garner FA, Freyer PD, Okita T, Butt DP (2014) Mechanical behavior of AISI 304SS determined by miniature test methods after neutron irradiation to 28 dpa. J Nucl Mater 448(1–3):315–324CrossRef
171.
go back to reference Wanjara P, Brochu M (2010) Characterization of electron beam welded AA2024. Vacuum 85(2):268–282CrossRef Wanjara P, Brochu M (2010) Characterization of electron beam welded AA2024. Vacuum 85(2):268–282CrossRef
172.
go back to reference Wanjara P, Jahazi M (2009) Application of shear punch testing to study microstructure-property relationships in electron beam welded 17–4 PH stainless steel. Can Metall Q 48(3):317–326CrossRef Wanjara P, Jahazi M (2009) Application of shear punch testing to study microstructure-property relationships in electron beam welded 17–4 PH stainless steel. Can Metall Q 48(3):317–326CrossRef
173.
go back to reference Lucas GE, Odette GR, Sokolov M, Spätig P, Yamamoto T, Jung P (2002) Recent progress in small specimen test technology. J Nucl Mater 307–311(2):1600–1608CrossRef Lucas GE, Odette GR, Sokolov M, Spätig P, Yamamoto T, Jung P (2002) Recent progress in small specimen test technology. J Nucl Mater 307–311(2):1600–1608CrossRef
174.
go back to reference Hirose T, Sakasegawa H, Kohyama A, Katoh Y, Tanigawa H (2000) Effect of specimen size on fatigue properties of reduced activation ferritic/martensitic steels. J Nucl Mater 283–287(2):1018–1022CrossRef Hirose T, Sakasegawa H, Kohyama A, Katoh Y, Tanigawa H (2000) Effect of specimen size on fatigue properties of reduced activation ferritic/martensitic steels. J Nucl Mater 283–287(2):1018–1022CrossRef
175.
go back to reference Li M, Stubbins JF (2002) Subsize specimens for fatigue crack growth rate testing metallic materials. ASTM Spec Tech Publ 1418:321–338 Li M, Stubbins JF (2002) Subsize specimens for fatigue crack growth rate testing metallic materials. ASTM Spec Tech Publ 1418:321–338
176.
go back to reference Villarraga ML, Edidin A, Herr M, Kurtz SM (2004) Multiaxial fatigue behavior of oxidized and unoxidized UHMWPE during cyclic small punch testing at body temperature. Crosslinked Therm Treat Ultra-high Mol Weight Polyethyl Jt Replace ASTM STP 1445:117–136CrossRef Villarraga ML, Edidin A, Herr M, Kurtz SM (2004) Multiaxial fatigue behavior of oxidized and unoxidized UHMWPE during cyclic small punch testing at body temperature. Crosslinked Therm Treat Ultra-high Mol Weight Polyethyl Jt Replace ASTM STP 1445:117–136CrossRef
177.
go back to reference Jaekel DJ, MacDonald DW, Kurtz SM (2011) Characterization of PEEK biomaterials using the small punch test. J Mech Behav Biomed Mater 4(7):1275–1282CrossRef Jaekel DJ, MacDonald DW, Kurtz SM (2011) Characterization of PEEK biomaterials using the small punch test. J Mech Behav Biomed Mater 4(7):1275–1282CrossRef
178.
go back to reference Prakash RV, Dhaka P, Prasad Reddy GV, Sandhya R (2019) Understanding the fatigue response of small volume specimens through novel fatigue test methods–experimental results and numerical simulation. Theor Appl Fract Mech 103:102304CrossRef Prakash RV, Dhaka P, Prasad Reddy GV, Sandhya R (2019) Understanding the fatigue response of small volume specimens through novel fatigue test methods–experimental results and numerical simulation. Theor Appl Fract Mech 103:102304CrossRef
179.
go back to reference Torres-Caceres J (2018) A framework for miniaturized mechanical characterization of tensile, creep, and fatigue properties of SLM alloys. In: Mechanical and aerospace engineering. University of Central Florida, Orlando Torres-Caceres J (2018) A framework for miniaturized mechanical characterization of tensile, creep, and fatigue properties of SLM alloys. In: Mechanical and aerospace engineering. University of Central Florida, Orlando
180.
go back to reference Lancaster R, Illsley H, Jeffs S, Hurst R, and Baxter G (2018) Application of the small punch test to determine the fatigue properties of additive manufactured aerospace alloys. In: MATEC web of conferences–12th international fatigue congress Lancaster R, Illsley H, Jeffs S, Hurst R, and Baxter G (2018) Application of the small punch test to determine the fatigue properties of additive manufactured aerospace alloys. In: MATEC web of conferences–12th international fatigue congress
181.
go back to reference Madia M, Foletti S, Torsello G, Cammi A (2013) On the applicability of the small punch test to the characterization of the 1CrMoV aged steel: Mechanical testing and numerical analysis. Eng Fail Anal 34:189–203CrossRef Madia M, Foletti S, Torsello G, Cammi A (2013) On the applicability of the small punch test to the characterization of the 1CrMoV aged steel: Mechanical testing and numerical analysis. Eng Fail Anal 34:189–203CrossRef
182.
go back to reference Peñuelas I, Cuesta II, Betegón C, Rodriguez C, Belzunce FJ (2009) Inverse determination of the elastoplastic and damage parameters on small punch tests. Fatigue Fract Eng Mater Struct 32(11):872–885CrossRef Peñuelas I, Cuesta II, Betegón C, Rodriguez C, Belzunce FJ (2009) Inverse determination of the elastoplastic and damage parameters on small punch tests. Fatigue Fract Eng Mater Struct 32(11):872–885CrossRef
183.
go back to reference Jónás, S., S. Szávai, P. Rózsahegyi, and R. Beleznai (2013) Determination of material properties using small punch test. In: microcad 2013: XXVII. International scientific conference. University of Miskolc Jónás, S., S. Szávai, P. Rózsahegyi, and R. Beleznai (2013) Determination of material properties using small punch test. In: microcad 2013: XXVII. International scientific conference. University of Miskolc
184.
go back to reference Zhong J, Song M, Guan K, Dymacek P (2020) Application of a database in the evaluation of strengths of Cr-Mo steels by means of small punch test. Int J Mech Sci 166:105195CrossRef Zhong J, Song M, Guan K, Dymacek P (2020) Application of a database in the evaluation of strengths of Cr-Mo steels by means of small punch test. Int J Mech Sci 166:105195CrossRef
185.
go back to reference Chen G, Zhai PC, Shao A-J (2005) Appraisement of creep properties of 12Cr1MoV steel by Small Punch creep test method. Mater Sci Forum 492:545–550CrossRef Chen G, Zhai PC, Shao A-J (2005) Appraisement of creep properties of 12Cr1MoV steel by Small Punch creep test method. Mater Sci Forum 492:545–550CrossRef
186.
go back to reference Foulds JR, Wu M, Srivastav S, Jewett CW (1998) Fracture and tensile properties of ASTM cross-comparison exercise A 533B steel by small punch testing. In: small specimen test techniques. ASTM International, West Conshohocken, PA Foulds JR, Wu M, Srivastav S, Jewett CW (1998) Fracture and tensile properties of ASTM cross-comparison exercise A 533B steel by small punch testing. In: small specimen test techniques. ASTM International, West Conshohocken, PA
187.
go back to reference Cuesta II, Alegre JM, Lacalle R (2010) Determination of the gurson-tvergaard damage model parameters for simulating small punch tests. Fatigue Fract Eng Mater Struct 33(11):703–713 Cuesta II, Alegre JM, Lacalle R (2010) Determination of the gurson-tvergaard damage model parameters for simulating small punch tests. Fatigue Fract Eng Mater Struct 33(11):703–713
188.
go back to reference Dutta BK, Guin S, Sahu MK, Samal MK (2008) A phenomenological form of the q2 parameter in the gurson model. Int J Press Vessels Pip 85(4):199–210CrossRef Dutta BK, Guin S, Sahu MK, Samal MK (2008) A phenomenological form of the q2 parameter in the gurson model. Int J Press Vessels Pip 85(4):199–210CrossRef
189.
go back to reference Egan P, Whelan MP, Lakestani F, Connelly MJ (2007) Small punch test: an approach to solve the inverse problem by deformation shape and finite element optimization. Comput Mater Sci 40(1):33–39CrossRef Egan P, Whelan MP, Lakestani F, Connelly MJ (2007) Small punch test: an approach to solve the inverse problem by deformation shape and finite element optimization. Comput Mater Sci 40(1):33–39CrossRef
190.
go back to reference Linse T, Kuna M, Schuhknecht J, Viehrig HW (2008) Usage of the small-punch-test for the characterisation of reactor vessel steels in the brittle–ductile transition region. Eng Fract Mech 75(11):3520–3533CrossRef Linse T, Kuna M, Schuhknecht J, Viehrig HW (2008) Usage of the small-punch-test for the characterisation of reactor vessel steels in the brittle–ductile transition region. Eng Fract Mech 75(11):3520–3533CrossRef
191.
go back to reference Yang S, Cao Y, Ling X, Qian Y (2017) Assessment of mechanical properties of Incoloy800H by means of small punch test and inverse analysis. J Alloy Compd 695:2499–2505CrossRef Yang S, Cao Y, Ling X, Qian Y (2017) Assessment of mechanical properties of Incoloy800H by means of small punch test and inverse analysis. J Alloy Compd 695:2499–2505CrossRef
192.
go back to reference Li YZ, Stevens P, Geng JF, Ma DF, Xu L (2017) Determination of creep properties from small punch test with reverse algorithm. Key Eng Mater 734:212–236CrossRef Li YZ, Stevens P, Geng JF, Ma DF, Xu L (2017) Determination of creep properties from small punch test with reverse algorithm. Key Eng Mater 734:212–236CrossRef
193.
go back to reference Husain A, Sehgal DK, Pandey RK (2004) An inverse finite element procedure for the determination of constitutive tensile behavior of materials using miniature specimen. Comput Mater Sci 31(1–2):84–92CrossRef Husain A, Sehgal DK, Pandey RK (2004) An inverse finite element procedure for the determination of constitutive tensile behavior of materials using miniature specimen. Comput Mater Sci 31(1–2):84–92CrossRef
194.
go back to reference Campitelli EN, Spätig P, Bonadé R, Hoffelner W, Victoria M (2004) Assessment of the constitutive properties from small ball punch test: experiment and modeling. J Nucl Mater 335(3):366–378CrossRef Campitelli EN, Spätig P, Bonadé R, Hoffelner W, Victoria M (2004) Assessment of the constitutive properties from small ball punch test: experiment and modeling. J Nucl Mater 335(3):366–378CrossRef
195.
go back to reference Guan K, Xu T, Zhang X, Wang Z (2013) Effect of microdefects on load-deflection of small punch test by experimental investigation and finite element analysis. Int J Press Vessels Pip 110:14–16CrossRef Guan K, Xu T, Zhang X, Wang Z (2013) Effect of microdefects on load-deflection of small punch test by experimental investigation and finite element analysis. Int J Press Vessels Pip 110:14–16CrossRef
196.
go back to reference Hůlka J, Kubík P, Petruška J (2012) Sensitivity analysis of small punch test. Eng Mech 128 Hůlka J, Kubík P, Petruška J (2012) Sensitivity analysis of small punch test. Eng Mech 128
197.
go back to reference Kumar P, Dutta BK, Chattopadhyay J (2017) Implementation of theory of plasticity for parametric study on the relation between thickness change and central deflection and fracture point location during small punch test. Procedia Eng 173:1101–1107CrossRef Kumar P, Dutta BK, Chattopadhyay J (2017) Implementation of theory of plasticity for parametric study on the relation between thickness change and central deflection and fracture point location during small punch test. Procedia Eng 173:1101–1107CrossRef
198.
go back to reference Goyal S, Karthik V, Kasiviswanathan KV, Valsan M, Rao KBS, Raj B (2010) Finite element analysis of shear punch testing and experimental validation. Mater Des 31(5):2546–2552CrossRef Goyal S, Karthik V, Kasiviswanathan KV, Valsan M, Rao KBS, Raj B (2010) Finite element analysis of shear punch testing and experimental validation. Mater Des 31(5):2546–2552CrossRef
199.
go back to reference Torres J, Gordon AP (2017) Characterization and optimization of selective laser melting materials through small punch testing. In: ASME turbo expo 2017: turbomachinery technical conference and exposition. Charlotte, NC Torres J, Gordon AP (2017) Characterization and optimization of selective laser melting materials through small punch testing. In: ASME turbo expo 2017: turbomachinery technical conference and exposition. Charlotte, NC
200.
go back to reference Jahangiri MR, Abedini M (2014) Effect of long time service exposure on microstructure and mechanical properties of gas turbine vanes made of IN939 alloy. Mater Des 64:588–600CrossRef Jahangiri MR, Abedini M (2014) Effect of long time service exposure on microstructure and mechanical properties of gas turbine vanes made of IN939 alloy. Mater Des 64:588–600CrossRef
201.
go back to reference Jahangiri MR, Arabi H, Boutorabi SMA (2014) Comparison of microstructural stability of IN939 superalloy with two different manufacturing routes during long-time aging. Trans Nonferrous Met Soc China 24(6):1717–1729CrossRef Jahangiri MR, Arabi H, Boutorabi SMA (2014) Comparison of microstructural stability of IN939 superalloy with two different manufacturing routes during long-time aging. Trans Nonferrous Met Soc China 24(6):1717–1729CrossRef
202.
go back to reference Gibbons TB, Stickler R (1982) IN939: metallurgy, properties and performance. In: Brunetaud R et al (eds) High temperature alloys for gas turbines 1982. Springer, Netherlands, pp 369–393CrossRef Gibbons TB, Stickler R (1982) IN939: metallurgy, properties and performance. In: Brunetaud R et al (eds) High temperature alloys for gas turbines 1982. Springer, Netherlands, pp 369–393CrossRef
203.
go back to reference The International Nickel Company (2002) Properties of some metals and alloys. Nickel Institute, Canada The International Nickel Company (2002) Properties of some metals and alloys. Nickel Institute, Canada
204.
go back to reference Gu D, Shen Y (2009) Effects of processing parameters on consolidation and microstructure of W-Cu components by DMLS. J Alloy Compd 473(1–2):107–115CrossRef Gu D, Shen Y (2009) Effects of processing parameters on consolidation and microstructure of W-Cu components by DMLS. J Alloy Compd 473(1–2):107–115CrossRef
205.
go back to reference Blackwell PL (2005) The mechanical and microstructural characteristics of laser-deposited IN718. J Mater Process Technol 170(1–2):240–246CrossRef Blackwell PL (2005) The mechanical and microstructural characteristics of laser-deposited IN718. J Mater Process Technol 170(1–2):240–246CrossRef
206.
go back to reference EOS (2014) Material data sheet EOS NickelAlloy IN718, E.O.S. GmbH, Editor EOS (2014) Material data sheet EOS NickelAlloy IN718, E.O.S. GmbH, Editor
207.
go back to reference Stratasys (2015) Inconel 625 direct metal laser sintering material specifications. I. Stratasys Direct, Editor Stratasys (2015) Inconel 625 direct metal laser sintering material specifications. I. Stratasys Direct, Editor
208.
go back to reference Siddiqui SF, O’Nora N, Fasoro AA, Gordon AP (2017) Modeling the influence of build orientation on the monotonic and cyclic response of additively manufactured stainless steel GP1/17–4PH. In: ASME 2017 international mechanical engineering congress & exposition. American Society of Mechanical Engineers, Tampa, Florida Siddiqui SF, O’Nora N, Fasoro AA, Gordon AP (2017) Modeling the influence of build orientation on the monotonic and cyclic response of additively manufactured stainless steel GP1/17–4PH. In: ASME 2017 international mechanical engineering congress & exposition. American Society of Mechanical Engineers, Tampa, Florida
209.
go back to reference Altstadt E, Ge HE, Kuksenko V, Serrano M, Houska M, Lasan M, Bruchhausen M, Lapetite JM, Dai Y (2016) Critical evaluation of the small punch test as a screening procedure for mechanical properties. J Nucl Mater 472:186–195CrossRef Altstadt E, Ge HE, Kuksenko V, Serrano M, Houska M, Lasan M, Bruchhausen M, Lapetite JM, Dai Y (2016) Critical evaluation of the small punch test as a screening procedure for mechanical properties. J Nucl Mater 472:186–195CrossRef
210.
go back to reference Sunjaya D, Wei T, Harrison R, Yeung WY (2007) Finite element modelling of small punch test on 304H stainless steel. Key Eng Mater 345–346:1165–1168CrossRef Sunjaya D, Wei T, Harrison R, Yeung WY (2007) Finite element modelling of small punch test on 304H stainless steel. Key Eng Mater 345–346:1165–1168CrossRef
211.
go back to reference Karl J (2013) Thermomechanical fatigue life prediction of notched 304 stainless steel. In: Mechanical and aerospace engineering. University of Central Florida, Florida Karl J (2013) Thermomechanical fatigue life prediction of notched 304 stainless steel. In: Mechanical and aerospace engineering. University of Central Florida, Florida
212.
go back to reference Keller S (2013) Creep-fatigue crack initiation and propagation of a notched stainless steel. In: Mechanical and aerospace engineering. University of Central Florida, Florida Keller S (2013) Creep-fatigue crack initiation and propagation of a notched stainless steel. In: Mechanical and aerospace engineering. University of Central Florida, Florida
213.
go back to reference Yang SS, Ling X, Qian Y, Ma RB (2015) Yield strength analysis by small punch test using inverse finite element method. Procedia Eng 130:1039–1045CrossRef Yang SS, Ling X, Qian Y, Ma RB (2015) Yield strength analysis by small punch test using inverse finite element method. Procedia Eng 130:1039–1045CrossRef
214.
go back to reference Sanders M, Di Bella F, Liang H (2011) Mechanical behavior of aluminum alloys during small punch test. J Test Eval 39(5):946–953 Sanders M, Di Bella F, Liang H (2011) Mechanical behavior of aluminum alloys during small punch test. J Test Eval 39(5):946–953
215.
go back to reference Foletti S, Madia M, Cammi A, Torsello G (2011) Characterization of the behavior of a turbine rotor steel by inverse analysis on the small punch test. Procedia Eng 10:3628–3635CrossRef Foletti S, Madia M, Cammi A, Torsello G (2011) Characterization of the behavior of a turbine rotor steel by inverse analysis on the small punch test. Procedia Eng 10:3628–3635CrossRef
Metadata
Title
Mechanics of the small punch test: a review and qualification of additive manufacturing materials
Authors
Jonathan Torres
Ali P. Gordon
Publication date
17-03-2021
Publisher
Springer US
Published in
Journal of Materials Science / Issue 18/2021
Print ISSN: 0022-2461
Electronic ISSN: 1573-4803
DOI
https://doi.org/10.1007/s10853-021-05929-8

Other articles of this Issue 18/2021

Journal of Materials Science 18/2021 Go to the issue

Premium Partners