Top

Published in:

2023 | OriginalPaper | Chapter

Metallic Plate-Lattice-Structures for a Modular and Lightweight Designed Die Casting Tool

Authors : B. Winter, J. Schwab, A. Hürkamp, S. Müller, K. Dröder

Published in: Production at the Leading Edge of Technology

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Conventional die casting tools are often oversized with regard to their mechanical stability, which results in increased energy requirements for kinematic processes and tool temperature control systems. In addition, these die casting tools often lack flexibility and modularity. One way to counter these disadvantages are lightweight structures, which can be built up in a modular manner depending on the application. Due to their larger cross-section compared to conventional lattice structures, plate lattice structures (PLS) offer higher mechanical load-bearing capacity. The aim of this work is to investigate such PLS with regard to their manufacturability in an additive manufacturing process. The specimens made from 1.4545 are first examined for dimensional accuracy and defects using computed tomography. Subsequently, an elastic model of these structures is numerically generated and calculated to obtain the structural stiffnesses. With this knowledge, a simplified numerical feasibility study was carried out.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Investigation of Geometrical and Microstructural Influences on the Mechanical Properties of an Extruded AA7020 Tube

next chapter Impact of Data Sampling on Performance and Robustness of Machine Learning Models in Production Engineering

Müller, S., Müller, A., Rothe, F., Dilger, K., Dröder, K.: An initial study of a lightweight die casting die using a modular design approach. Int. J. Metalcast. 12(4), 870–883 (2018). https://doi.org/10.1007/s40962-018-0218-3CrossRef

Brecher, C., Özdemir, D. (eds.): Integrative production technology. Springer, Cham (2017). https://doi.org/10.1007/978-3-319-47452-6CrossRef

Queudeville, Y., Ivanov, T., Nußbaum, C., Vroomen, U., Bührig-Polaczek, A.: Decision and design methodologies for the layout of modular dies for high-pressure-die-cast-processes. Mat. Sci. Forum 618–619, 345–348 (2009). https://doi.org/10.4028/www.scientific.net/MSF.618-619.345CrossRef

Queudeville, Y., Vroomen, U., Bührig-Polaczek, A.: Modularization methodology for high pressure die casting dies. Int. J. Adv. Manuf. Technol. 71(9–12), 1677–1686 (2014). https://doi.org/10.1007/s00170-013-5582-9CrossRef

Berger, J.B., Wadley, H.N.G., McMeeking, R.M.: Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness. Nature 543, 533–537 (2017). https://doi.org/10.1038/nature21075

Tancogne-Dejean, T., Diamantopoulou, M., Gorji, M.B., Bonatti, C., Mohr, D.: 3D Plate-lattices: an emerging class of low-density metamaterial exhibiting optimal isotropic stiffness, Adv. Mater. 30(45) (2018). https://doi.org/10.1002/adma.201803334

Xue, R., Cui, X., Zhang, P., Liu, K., Li, Y., Wu, W., et al.: Mechanical design and energy absorption performances of novel dual scale hybrid plate-lattice mechanical metamaterials. Extreme Mech. Lett. 40 (2020). https://doi.org/10.1016/j.eml.2020.100918

Tancogne-Dejean, T., Li, X., Diamantopoulou, M., Roth, C.C., Mohr, D.: High strain rate response of additively-manufactured plate-lattices: experiments and modeling. J. Dynam. Behavior Mater. 5(3), 361–375 (2019). https://doi.org/10.1007/s40870-019-00219-6CrossRef

Andrew, J.J., Schneider, J., Ubaid, J., Velmurugan, R., Gupta, N.K., Kumar, S.: Energy absorption characteristics of additively manufactured plate-lattices under low-velocity impact loading. Int. J. Impact Eng. 149 (2021). https://doi.org/10.1016/j.ijimpeng.2020.103768

10.

Andrew, J.J., Verma, P., Kumar, S.: Impact behavior of nanoengineered, 3D printed plate-lattices. Mater. Des. 202 (2021). https://doi.org/10.1016/j.matdes.2021.109516

11.

Crook, C., Bauer, J., Guell Izard, A. et al.: Plate-nanolattices at the theoretical limit of stiffness and strength. Nat. Commun. 11 (2020). https://doi.org/10.1038/s41467-020-15434-2

12.

SLM Solutions Group AG, Material datasheet Stainless steel 15-5PH/1.4545/A564. https://www.slm-solutions.com/fileadmin/Content/Powder/MDS/MDS_Fe-Alloy_15-5PH_0919.pdf. Last accessed 07 May 2022

13.

Monkova, K., Zetkova, I., Kučerová, L., Zetek, M., Monka, P., Daňa, M.: Study of 3D printing direction and effects of heat treatment on mechanical properties of MS1 maraging steel. Arch. Appl. Mech. 89(5), 791–804 (2018). https://doi.org/10.1007/s00419-018-1389-3CrossRef

14.

Rothman, M.F.: High-temperature property data: ferrous alloys. ASM Int. (1988)

Title: Metallic Plate-Lattice-Structures for a Modular and Lightweight Designed Die Casting Tool
Authors: B. Winter
J. Schwab
A. Hürkamp
S. Müller
K. Dröder
Publisher: Springer International Publishing
Book: Production at the Leading Edge of Technology
Print ISBN: 978-3-031-18317-1

Electronic ISBN: 978-3-031-18318-8

Copyright Year: 2023
DOI: https://doi.org/10.1007/978-3-031-18318-8_46

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partners