Issue 1/2019
Content (18 Articles)
Metallographic Studies of Dissimilar Al-Cu Laser-Welded Joints Using Various Etchants
Pascal Schmalen, Karthik Mathivanan, Peter Plapper
Effect of Different Nitriding Temperature on Secondary Recrystallization of Hi-B Steel with an Element of Cu
Fangyu Huang, Siqian Bao, Gang Zhao, Chengqun Su
Effect of Applied Energy on the Microstructure, Texture, and Mechanical Properties of Short-Circuit Metal Inert Gas-Welded Modified Cr-Mo Steel Joints
S. Madhavan, M. Kamaraj, B. Arivazhagan
Corrosion Evaluation of Duplex and Superduplex Stainless Steel Friction Stir Welds Using Potentiodynamic Measurements and Immersion Tests in Chloride Environments
Larissa A. Santa Cruz, Igor J. Marques, Severino L. Urtiga Filho, Tahiana F. C. Hermenegildo, Tiago F. A. Santos
A Dynamic Recrystallization (DRX) Constitutive Model for Elevated Temperature Flow Behavior of Cu-0.5Cr-0.1Zr Alloy
Yuanchun Huang, Ming Li, Zhengbing Xiao, Hui Liu, Sanxing Wang
Influence of Tool Tilt Angle on the Formation of Friction Stir Processing Zone in Cast Magnesium Alloy ZK60/SiCp Surface Composites
M. Vigneshkumar, G. Padmanaban, V. Balasubramanian
Abrasive Wear of Compacted Graphite Cast Iron with Added Tin
Yezhe Lyu
A Comparative Study of Inhibitive Effect of Waste Product on Stainless Steel Corrosion in Sodium Chloride/Sulfuric Acid Environments
O. Sanni, A. P. I. Popoola, O. S. I. Fayomi, C. A. Loto
Cavitation Behavior in Superplastic AZ31 Magnesium Alloy During Pulse Current Auxiliary Gas Blow Forming
Chao Li, Yan Zhang, Bao Huai
Optimization of Process Parameters by Taguchi Grey Relational Analysis in Joining Inconel-625 Through Microwave Hybrid Heating
Ravindra I. Badiger, S. Narendranath, M. S. Srinath
Effect of SIMA Process on Microstructure and Wear Behavior of Al-Mg2Si-3% Ni Composite
Hesam Pourfallah, Mohammad Shahmiri
Development of Coating on the Surface of Reduced Activation Ferritic Martensitic Steel (RAFMS) Substrate Using Hot Dip Aluminization and Heat Treatment
Japinder Kaur, Kulwant Singh, Bhaskar Paul, M. R. Gonal
Effect of Martensite Morphology on Tribological Behaviour of a Low-Alloy Steel
C. Trevisiol, A. Jourani, S. Bouvier