Skip to main content
main-content
Top

Journal

Metallurgical and Materials Transactions A

Metallurgical and Materials Transactions A 11/2017

Issue 11/2017

Table of Contents ( 60 Articles )

05-09-2017 | Topical Collection: Characterization of Minerals, Metals, and Materials 2017 | Issue 11/2017

Characterizing the Effect of Laser Power on Laser Metal Deposited Titanium Alloy and Boron Carbide

E. T. Akinlabi, M. F. Erinosho

23-08-2017 | Topical Collection: Carl Koch Symposium: Mechanical Behavior of Nanomaterials | Issue 11/2017

In Situ Studies on the Irradiation-Induced Twin Boundary-Defect Interactions in Cu

C. Fan, Jin Li, Zhe Fan, H. Wang, X. Zhang

01-09-2017 | Topical Collection: Carl Koch Symposium: Mechanical Behavior of Nanomaterials | Issue 11/2017

Bulk Nanostructured Materials

C. C. Koch, T. G. Langdon, E. J. Lavernia

31-08-2017 | Communication | Issue 11/2017 Open Access

Determination of Crystal Orientation by Ω-Scan Method in Nickel-Based Single-Crystal Turbine Blades

Kamil Gancarczyk, Robert Albrecht, Hans Berger, Dariusz Szeliga, Andrzej Gradzik, Jan Sieniawski

11-09-2017 | Communication | Issue 11/2017

Characterizing Grain-Oriented Silicon Steel Sheet Using Automated High-Resolution Laue X-ray Diffraction

Peter Lynch, Matthew Barnett, Andrew Stevenson, Bevis Hutchinson

15-09-2017 | Communication | Issue 11/2017

Hydrogen Permeation in Cold-Rolled High-Mn Twinning-Induced Plasticity Steels

Do Kyeong Han, A In Hwang, Woo Jun Byeon, Seung Jeong Noh, Dong-Woo Suh

23-09-2017 | Communication | Issue 11/2017

Influence of Heating Rate on Annealing and Reverse Transformation Behavior of TRIP Steels Having Martensite as Starting Microstructure

Jeong In Kim, Yong Hoon Choi, Joo Hyun Ryu, Sea Woong Lee, Kyooyoung Lee, Dong-Woo Suh

24-09-2017 | Communication | Issue 11/2017

Elasticity of Ni x W1−x (x ≤ 0.1875) Alloys from First Principles Calculations

Arnaud Metsue, Xavier Feaugas

25-09-2017 | Communication | Issue 11/2017 Open Access

On a Testing Methodology for the Mechanical Property Assessment of a New Low-Cost Titanium Alloy Derived from Synthetic Rutile

L. L. Benson, L. A. Benson Marshall, N. S. Weston, I. Mellor, M. Jackson

19-09-2017 | Issue 11/2017 Open Access

Retained Austenite Transformation during Heat Treatment of a 5 Wt Pct Cr Cold Work Tool Steel

M. Arbab Rehan, Anna Medvedeva, Lars-Erik Svensson, Leif Karlsson

28-08-2017 | Issue 11/2017

On the Stability of Reversely Formed Austenite and Related Mechanism of Transformation in an Fe-Ni-Mn Martensitic Steel Aided by Electron Backscattering Diffraction and Atom Probe Tomography

Hamidreza Koohdar, Mahmoud Nili-Ahmadabadi, Mohammad Habibi-Parsa, Hamid Reza Jafarian, Tilak Bhattacharjee, Nobuhiro Tsuji

23-08-2017 | Issue 11/2017

Validation and Analysis of the Parameters for Reconstructing the Austenite Phase from Martensite Electron Backscatter Diffraction Data

L. Sanz, B. Pereda, B. López

05-09-2017 | Issue 11/2017

Influence of the Heterogeneous Nucleation Sites on the Kinetics of Intermetallic Phase Formation in Aged Duplex Stainless Steel

Elis Almeida Melo, Rodrigo Magnabosco

11-09-2017 | Issue 11/2017

Effect of Temperature and Composition on NiAl Precipitation and Morphology in Fe-Ni-Al Alloys

C. Ferreira-Palma, E. Contreras-Piedras, N. Cayetano-Castro, M. L. Saucedo-Muñoz, V. M. Lopez-Hirata, J. L. González-Velázquez, H. J. Dorantes-Rosales

14-09-2017 | Issue 11/2017 Open Access

Widening of Laths in Bainite

Jiaqing Yin, Mats Hillert, Annika Borgenstam

25-09-2017 | Issue 11/2017 Open Access

Kinetics of the fcc → hcp Phase Transformation in Cu-Ge Solid Solutions Upon Isothermal Aging

E. Polatidis, N. Zotov, E. Bischoff, E. J. Mittemeijer

16-08-2017 | Issue 11/2017

Relating Residual Stress and Substructural Evolution During Tensile Deformation of an Aluminum-Manganese Alloy

Arijit Lodh, Tawqeer Nasir Tak, Aditya Prakash, P. J. Guruprasad, Christopher Hutchinson, Indradev Samajdar

14-08-2017 | Issue 11/2017

Effect of Extrusion Temperature on the Plastic Deformation of an Mg-Y-Zn Alloy Containing LPSO Phase Using In Situ Neutron Diffraction

G. Garces, P. Perez, S. Cabeza, S. Kabra, W. Gan, P. Adeva

31-08-2017 | Issue 11/2017

Effect of Boron on the Strength and Toughness of Direct-Quenched Low-Carbon Niobium Bearing Ultra-High-Strength Martensitic Steel

Jaakko Hannula, Jukka Kömi, David A. Porter, Mahesh C. Somani, Antti Kaijalainen, Pasi Suikkanen, Jer-Ren Yang, Shao-Pu Tsai

21-08-2017 | Issue 11/2017

The Radial Temperature Gradient in the Gleeble® Hot-Torsion Test and Its Effect on the Interpretation of Plastic-Flow Behavior

S. L. Semiatin, D. W. Mahaffey, N. C. Levkulich, O. N. Senkov

28-08-2017 | Issue 11/2017

Strain-Rate and Temperature Dependences of Deformation Behavior of AZ61Mg Alloy Processed by Multi-directional Forging Under Decreasing Temperature Conditions

C. Watanabe, R. Monzen, R. Ueji, H. Miura

16-08-2017 | Issue 11/2017 Open Access

Influence of Filler Alloy Composition and Process Parameters on the Intermetallic Layer Thickness in Single-Sided Cold Metal Transfer Welding of Aluminum-Steel Blanks

Zahra Silvayeh, Rudolf Vallant, Christof Sommitsch, Bruno Götzinger, Werner Karner, Matthias Hartmann

06-09-2017 | Issue 11/2017

Effect of Heat Treatment on Liquation Cracking in Continuous Fiber and Pulsed Nd:YAG Laser Welding of HASTELLOY X Alloy

M. Pakniat, F. Malek Ghaini, M. J. Torkamany

11-09-2017 | Issue 11/2017 Open Access

The Influence of Thermal Cycles on the Microstructure of Grade 92 Steel

X. Xu, G. D. West, J. A. Siefert, J. D. Parker, R. C. Thomson

12-09-2017 | Issue 11/2017

Thermal Modeling of Resistance Spot Welding and Prediction of Weld Microstructure

M. Sheikhi, M. Valaee Tale, GH. R. Usefifar, Arash Fattah-Alhosseini

16-08-2017 | Issue 11/2017 Open Access

The Role of Recrystallization in Spontaneous Grain Refinement of Rapidly Solidified Ni3Ge

Nafisul Haque, Robert F. Cochrane, Andrew M. Mullis

14-09-2017 | Issue 11/2017 Open Access

New Experimental Technique for Nodularity and Mg Fading Control in Compacted Graphite Iron Production on Laboratory Scale

Juan Carlos Hernando, Björn Domeij, Daniel González, José Manuel Amieva, Attila Diószegi

07-09-2017 | Issue 11/2017

Eutectic Formation During Solidification of Ni-Based Single-Crystal Superalloys with Additional Carbon

Fu Wang, Dexin Ma, Andreas Bührig-Polaczek

16-08-2017 | Issue 11/2017

Development of High-Strength Bulk Ultrafine-Grained Low Carbon Steel Produced by Equal-Channel Angular Pressing

Raj Bahadur Singh, N. K. Mukhopadhyay, G. V. S. Sastry, R. Manna

16-08-2017 | Issue 11/2017

Hot Stamping of Boron Steel Using Partition Heating for Tailored Properties: Experimental Trials and Numerical Analysis

Yanhong Mu, Baoyu Wang, Jing Zhou, Xu Huang, Xuetao Li

18-08-2017 | Issue 11/2017

On the Driving Forces of Magnetically Induced Martensitic Transformation in Directionally Solidified Polycrystalline Ni-Mn-In Meta-Magnetic Shape Memory Alloy with Structural Anisotropy

Qiaodan Hu, Zhenni Zhou, Liang Yang, Yujin Huang, Jun Li, Jianguo Li

10-08-2017 | Issue 11/2017

Comparison of SPS Processing Behavior between As Atomized and Cryomilled Aluminum Alloy 5083 Powder

Frank Kellogg, Brandon McWilliams, Jennifer Sietins, Anit Giri, Kyu Cho

31-08-2017 | Issue 11/2017

An Atom Probe Study of κ-carbide Precipitation in Austenitic Lightweight Steel and the Effect of Phosphorus

L. N. Bartlett, D. C. Van Aken, J. Medvedeva, D. Isheim, N. Medvedeva, K. Song

24-08-2017 | Issue 11/2017 Open Access

Weibull Modulus Estimated by the Non-linear Least Squares Method: A Solution to Deviation Occurring in Traditional Weibull Estimation

T. Li, W. D. Griffiths, J. Chen

13-09-2017 | Issue 11/2017 Open Access

From Solidification Processing to Microstructure to Mechanical Properties: A Multi-scale X-ray Study of an Al-Cu Alloy Sample

D. Tourret, J. C. E. Mertens, E. Lieberman, S. D. Imhoff, J. W. Gibbs, K. Henderson, K. Fezzaa, A. L. Deriy, T. Sun, R. A. Lebensohn, B. M. Patterson, A. J. Clarke

23-08-2017 | Issue 11/2017

Formation of the Ni3Nb δ-Phase in Stress-Relieved Inconel 625 Produced via Laser Powder-Bed Fusion Additive Manufacturing

Eric A. Lass, Mark R. Stoudt, Maureen E. Williams, Michael B. Katz, Lyle E. Levine, Thien Q. Phan, Thomas H. Gnaeupel-Herold, Daniel S. Ng

18-09-2017 | Issue 11/2017

Influence of Powder Outgassing Conditions on the Chemical, Microstructural, and Mechanical Properties of a 14 wt% Cr Ferritic ODS Steel

D. Sornin, P.-F. Giroux, E. Rigal, D. Fabregue, R. Soulas, D. Hamon

25-09-2017 | Issue 11/2017

The Kinetics of Precipitate Dissolution in a Nickel-Base Superalloy

S. L. Semiatin, N. C. Levkulich, A. E. Saurber, D. W. Mahaffey, E. J. Payton, O. N. Senkov

18-09-2017 | Issue 11/2017

The Effect of Ultrasonic Melt Treatment on Macro-Segregation and Peritectic Transformation in an Al-19Si-4Fe Alloy

C. J. Todaro, M. A. Easton, D. Qiu, G. Wang, D. H. StJohn, M. Qian

21-08-2017 | Issue 11/2017

Extension of the Mechanical Threshold Stress Model to Static and Dynamic Strain Aging: Application to AA5754-O

Yu Feng, Sudipto Mandal, Brian Gockel, Anthony D. Rollett

16-08-2017 | Issue 11/2017

A Crystal Plasticity Approach for Shear Banding in Hot Rolled High-Strength Steels

Matti Lindroos, Anssi Laukkanen, Veli-Tapani Kuokkala

15-09-2017 | Issue 11/2017 Open Access

Coupling of Acoustic Cavitation with Dem-Based Particle Solvers for Modeling De-agglomeration of Particle Clusters in Liquid Metals

Anton Manoylov, Bruno Lebon, Georgi Djambazov, Koulis Pericleous

24-08-2017 | Issue 11/2017

Aging Strengthening Mechanism of the Cu-1.0Zr Alloy

Ka Tian, Baohong Tian, Yi Zhang, Yong Liu, Alex A. Volinsky

05-09-2017 | Issue 11/2017

Phase Stability of Intermetallic Compound Ce3Al in Mechanical Milling

Yan-ping Zhang, Hiroyuki Takeya, Kenji Sakurai

05-09-2017 | Issue 11/2017

Different Effect of Co on the Formation of Topologically Close-Packed Phases in Ni-Cr-Mo and Ni-Cr-Re Alloys

Qianying Shi, Ning An, Jiajie Huo, Xianfei Ding, Yunrong Zheng, Qiang Feng

19-09-2017 | Issue 11/2017 Open Access

The Role of Ni-P Coating Structure on Fly Ash Cenospheres in the Formation of Magnesium Matrix Composites

Katarzyna N. Braszczyńska-Malik, Jacek Kamieniak

14-08-2017 | Issue 11/2017

Epitaxial Fe Thin Films on {100} Y2Ti2O7: Model Interfaces for Nano-Oxide Dispersion Strengthened Steels

T. Stan, Y. Wu, P. B. Wells, H. D. Zhou, G. R. Odette

29-08-2017 | Issue 11/2017

Effect of Precipitation During Quenching on the Prediction of the Mechanical Properties of Al-5 Pct Cu Alloy After T6 Treatment

Yisen Hu, Gang Wang, Wenguang Wang, Yiming Rong

23-08-2017 | Issue 11/2017

Vacuum Tribological Properties of Ti-20Zr-6.5Al-4V Alloy as Influenced by Sliding Velocities

H. Zhong, L. Y. Dai, Y. J. Yang, Y. Yue, B. A. Wang, X. Y. Zhang, M. Z. Ma, R. P. Liu

14-09-2017 | Issue 11/2017 Open Access

The Effect of Sr Modifier Additions on Double Oxide Film Defects in 2L99 Alloy Castings

Qi Chen, W. D. Griffiths

05-09-2017 | Issue 11/2017

Constitutive Analysis and Hot Deformation Behavior of Fine-Grained Mg-Gd-Y-Zr Alloys

R. Alizadeh, R. Mahmudi, O. A. Ruano, A. H. W. Ngan

14-09-2017 | Issue 11/2017

Stress-Relaxation Behavior of Magnesium-3Gadolinium-2Calcium-Based Alloys at Elevated Temperatures

Ning Mo, Qiyang Tan, Bin Jiang, Fusheng Pan, Ming-Xing Zhang

14-09-2017 | Issue 11/2017

Comprehensive Understanding of Ductility Loss Mechanisms in Various Steels with External and Internal Hydrogen

Osamu Takakuwa, Junichiro Yamabe, Hisao Matsunaga, Yoshiyuki Furuya, Saburo Matsuoka

31-08-2017 | Issue 11/2017

Magnetocaloric Effect with Very Small Magnetic Hysteresis Losses of CoMn1−x Ti x Ge Alloys

Oguz Yildirim, Onur Tozkoparan, Ercument Yuzuak, Yalcin Elerman, Ilker Dincer

01-09-2017 | Issue 11/2017

Influence of Heavy Fermion Ytterbium Substitution on the Electronic and Crystal Properties of the Frustrated Magnet CuFeO2 Oxide

Osman Murat Ozkendir

22-08-2017 | Issue 11/2017 Open Access

Microstructure and Texture Evolutions of Biomedical Ti-13Nb-13Zr Alloy Processed by Hydrostatic Extrusion

K. Ozaltin, A. Panigrahi, W. Chrominski, A. G. Bulutsuz, M. Kulczyk, M. J. Zehetbauer, M. Lewandowska

18-09-2017 | Erratum | Issue 11/2017

Erratum to: Evaluation of Caustic Embrittlement Susceptibility of Steels by Slow Strain Rate Testing

R. K. Singh Raman

18-09-2017 | Erratum | Issue 11/2017

Erratum to: A Novel Approach to Determination of Threshold for Stress Corrosion Cracking (KISCC) using Round Tensile Specimens

R. K. Singh Raman, R. Rihan, R. N. Ibrahim

14-09-2017 | Erratum | Issue 11/2017

Erratum to: Influence of Laser Processing Parameters on Microstructure and Corrosion Kinetics of Laser-Treated ZE41 Magnesium Alloy

P. Chakraborty Banerjee, R. K. Singh Raman, Y. Durandet, G. McAdam

14-09-2017 | Erratum | Issue 11/2017

Erratum to: Environment-Assisted Cracking of Twinning Induced Plasticity (TWIP) Steel: Role of pH and Twinning

R. K. Singh Raman, Muhammed Khalissi, Shahin Khoddam

Current Publications

Premium Partners

    Image Credits