Skip to main content
main-content
Top

Journal

Metallurgical and Materials Transactions A

Metallurgical and Materials Transactions A 3/2006

Issue 3/2006

Table of Contents ( 58 Articles )

01-03-2006 | Issue 3/2006

Symposium on computational aspects of mechanical properties of materials

Kwai S. Chan, Diana Farkas

01-03-2006 | Issue 3/2006

First-principles computations of mechanical properties of Ni2Cr and Ni2Mo

K. S. Chan, Y. -D. Lee, Y. -M. Pan

01-03-2006 | Issue 3/2006

Dislocation simulation of brittle-ductile transition in ferritic steels

S. J. Noronha, N. M. Ghoniem

01-03-2006 | Issue 3/2006

Microstructural effects in modeling the flow behavior of single-crystal superalloys

Y. S. Choi, T. A. Parthasarathy, D. M. Dimiduk, M. D. Uchic

01-03-2006 | Issue 3/2006

Simulation of the mechanical properties of an aluminum matrix composite using X-ray microtomography

I. G. Watson, P. D. Lee, R. J. Dashwood, P. Young

01-03-2006 | Issue 3/2006

Modeling the tensile properties in β-processed α/β Ti alloys

S. Kar, T. Searles, E. Lee, G. B. Viswanathan, H. L. Fraser, J. Tiley, R. Banerjee

01-03-2006 | Issue 3/2006

Evidence of transformation bursts during thermal cycling of a Pu-Ga alloy

K. J. M. Blobaum, C. R. Krenn, J. J. Haslam, M. A. Wall, A. J. Schwartz, J. N. Mitchell, T. B. Massalski

01-03-2006 | Issue 3/2006

Use of electrical resistance testing to redefine the transformation kinetics and phase diagram for shape-memory alloys

Z. He, K. R. Gall, L. C. Brinson

01-03-2006 | Issue 3/2006

Phase-field model prediction of nucleation and coarsening during austenite/ferrite transformation in steels

Cheng-Jiang Huang, David J. Browne

01-03-2006 | Issue 3/2006

An analysis of grain boundaries and grain growth in cemented tungsten carbide using orientation imaging microscopy

Vineet Kumar, Zhigang Zak Fang, S. I. Wright, M. M. Nowell

01-03-2006 | Issue 3/2006

Dynamic recrystallization of ferrite in a low-carbon steel

Li Longfei, Yang Wangyue, Sun Zuqing

01-03-2006 | Issue 3/2006

Nucleation and growth modes deduced from particle density distributions: Nanocrystallization of fcc Al in amorphous Al85Ni8Y5Co2

Heiko Nitsche, Ferdinand Sommer, Eric Jan Mittemeijer

01-03-2006 | Issue 3/2006

Effects of heat treatment on wear resistance and fracture toughness of duo-cast materials composed of high-chromium white cast iron and low-chromium steel

Chang Kyu Kim, Sunghak Lee, Jae-Young Jung

01-03-2006 | Issue 3/2006

Failure mechanisms in superplastic AA5083 materials

Mary-Anne Kulas, W. Paul Green, Eric M. Taleff, Paul E. Krajewski, Terry R. McNelley

01-03-2006 | Issue 3/2006

Plastic deformation in a multifunctional Ti-Nb-Ta-Zr-O alloy

S. Kuramoto, T. Furuta, J. H. Hwang, K. Nishino, T. Saito

01-03-2006 | Issue 3/2006

Correlation of microstructure with hardness and wear resistance in (CrB, MoB)/steel surface composites fabricated by high-energy electron beam irradiation

Kyuhong Lee, Duk-Hyun Nam, Sunghak Lee

01-03-2006 | Issue 3/2006

Controlled dissolution of colossal quantities of nitrogen in stainless steel

Thomas Christiansen, Marcel A. J. Somers

01-03-2006 | Issue 3/2006

The effects of alloy microstructure refinement on the short-term thermal oxidation of NiCoCrAlY alloys

T. J. Nijdam, C. Kwakernaak, W. G. Sloof

01-03-2006 | Issue 3/2006

Microstructure refinement of NiCoCrAIY alloys by laser surface melting

C. Kwakernaak, W. G. Sloof, T. J. Nijdam

01-03-2006 | Issue 3/2006

Thermal strain in the mushy zone related to hot tearing

Aage Stangeland, Asbjørn Mo, Mohammed M’Hamdi, David Viano, Cameron Davidson

01-03-2006 | Issue 3/2006

Master sintering curve concepts as applied to the sintering of molybdenum

Deborah C. Blaine, John D. Gurosik, Seong Jin Park, Randall M. German, Donald F. Heaney

01-03-2006 | Issue 3/2006

Thermal stability in bulk cryomilled ultrafine-grained 5083 Al alloy

Indranil Roy, Manish Chauhan, Farghalli A. Mohamed, Enrique J. Lavernia

01-03-2006 | Issue 3/2006

Long-term material balance of iron in aluminum reduction cells

František Šimko, Vladimír Daněk

01-03-2006 | Issue 3/2006

Evolution of crystallographic texture during equal channel angular extrusion of copper: The role of material variables

Satyam Suwas, Roxane Arruffat-Massion, László S. Tóth, André Eberhardt, Jean-Jacques Fundenberger, Werner Skrotzki

01-03-2006 | Issue 3/2006

A comparative study of the porous TiNi shape-memory alloys fabricated by three different processes

B. Yuan, X. P. Zhang, M. Zhu, M. Q. Zeng, C. Y. Chung

01-03-2006 | Issue 3/2006

Effects of rapid heating on solutionizing characteristics of Al-Si-Mg alloys using a fluidized bed

S. K. Chaudhury, D. Apelian

01-03-2006 | Issue 3/2006

Semisolid processing characteristics of AM series Mg alloys by rheo-diecasting

S. Ji, Ma Qian, Z. Fan

01-03-2006 | Communications | Issue 3/2006

Development of a new bond coat “EQ coating” system

Akihiro Sato, Hiroshi Harada, Kyoko Kawagishi

01-03-2006 | Communications | Issue 3/2006

Effect of iron purity on oxidation kinetics at 600 °C to 900 °C

Yongfu Zhu, Kouji Mimura, Hiroki Chujo, Sang-Hwui Hong, Jae-Won Lim, Minoru Isshiki, Qing Jiang

01-03-2006 | Erratum | Issue 3/2006

Reaction products of Al/TiC composites fabricated by the pressureless infiltration technique

K. B. Lee, H. S. Sim, H. Kwon

01-03-2006 | Issue 3/2006

Hume-rothery symposium on structure and diffusional growth mechanisms of irrational interphase boundaries foreword

George Spanos

01-03-2006 | Issue 3/2006

Influence of crystallography and bonding on the structure and migration of irrational interphase boundaries

H. I. Aaronson

01-03-2006 | Issue 3/2006

The nature and role of incoherent interphase interfaces in diffusional solid-solid phase transformations

T. B. Massalski, D. E. Laughlin, W. A. Soffa

01-03-2006 | Issue 3/2006

Edge-to-edge matching—The fundamentals

P. M. Kelly, M. -X. Zhang

01-03-2006 | Issue 3/2006

Edge-to-edge matching of lattice planes and coupling of crystallography and migration mechanisms of planar interfaces

J. F. Nie

01-03-2006 | Issue 3/2006

Edge-to-edge matching in thin films

C. Detavernier, C. Lavoie

01-03-2006 | Issue 3/2006

Edge-to-edge plane matching as a criterion for interphase boundaries of low energy

Gary R. Purdy

01-03-2006 | Issue 3/2006

Edge-to-edge interfaces in Ti-Al modeled with the embedded atom method

W. T. Reynolds Jr., D. Farkas

01-03-2006 | Issue 3/2006

A high-resolution time-resolved study of incoherent interface motion during the massive transformation in TiAl alloy

Nastaran Raffler, James M. Howe

01-03-2006 | Issue 3/2006

Investigation of the structure and composition of a {111} incoherent Zr/ZrN interface containing ledges by high-resolution transmission electron microscopy, image simulation, electron energy-loss spectroscopy, energy-filtering transmission electron microscopy, and near-coincidence-site analysis

P. Li, J. M. Howe, W. T. Reynolds Jr.

01-03-2006 | Issue 3/2006

Atomic structure of a {110} Zr/ZrN interface

P. Li, J. M. Howe, W. T. Reynolds Jr.

01-03-2006 | Issue 3/2006

Accommodation of angular incompatibilities between interfacial facets during precipitate growth

R. C. Pond, H. Jiao, L. C. Zhang, M. Aindow

01-03-2006 | Issue 3/2006

Structures in irrational singular interfaces

W. -Z. Zhang, D. Qiu, X. -P. Yang, F. Ye

01-03-2006 | Issue 3/2006

Calculation of the interfacial energies between α and γ iron and equilibrium particle shape

T. Nagano, M. Enomoto

01-03-2006 | Issue 3/2006

Orientation relationships associated with austenite formation from ferrite in a coarse-grained duplex stainless steel

E. F. Monlevade, I. G. S. Falleiros

01-03-2006 | Issue 3/2006

Crystallography and interphase boundary of (MnS + VC) complex precipitate in austenite

T. Furuhara, T. Maki, T. Kimori

01-03-2006 | Issue 3/2006

General discussion session of the 2004 hume-rothery symposium on “the structure and diffusional growth mechanisms of irrational interphase boundaries”

H. I. Aaronson, W. T. Reynolds Jr.

01-03-2006 | Issue 3/2006

Phase equilibria in the Mg-Al-Ca ternary system at 773 and 673 K

A. Suzuki, N. D. Saddock, J. W. Jones, T. M. Pollock

01-03-2006 | Issue 3/2006

Kinetics of the peritectic phase transformation: In-situ measurements and phase field modeling

Dominic Phelan, Mark Reid, Rian Dippenaar

01-03-2006 | Issue 3/2006

Thermally stable nanomultilayer films of Cu/Mo

Dheepa Srinivasan, Suchismita Sanyal, Reed Corderman, P. R. Subramanian

01-03-2006 | Issue 3/2006

Theoretical and practical implications of creep curve shape analyses for 7010 and 7075

H. Burt, B. Wilshire

01-03-2006 | Issue 3/2006

In-situ observation on microfracture behavior ahead of the crack tip in 63Sn37Pb solder alloy

Ying Ding Ph.D. Candidate, Chunqing Wang, Yanhong Tian, Binbin Zhang

01-03-2006 | Issue 3/2006

The effect of solution annealing on the microstructural behavior of alloy 22 welds

Bassem S. El-Dasher, Tammy S. Edgecumbe, Sharon G. Torres

01-03-2006 | Issue 3/2006

Synchrotron microradiography of temperature gradient zone melting in directional solidification

B. Li, H. D. Brody, A. Kazimirov

01-03-2006 | Issue 3/2006

Production of Ni3Ti-TiC x intermetallic-ceramic composites employing combustion synthesis reactions

Douglas E. Burkes, John J. Moore, Guglielmo Gottoli, Hu Chun Yi

01-03-2006 | Issue 3/2006

Orientation imaging microscopy studies of recrystallization in interstitial-free steel

Y. Y. Tse, B. J. Duggan

01-03-2006 | Issue 3/2006

Microstructural characterization of warm-worked commercially pure aluminum

S. X. Ding, J. L. Lin, C. P. Chang, P. W. Kao

01-03-2006 | Issue 3/2006

Modeling of microporosity formation in A356 aluminum alloy casting

J. D. Zhu, S. L. Cockcroft, D. M. Maijer

Current Publications

Premium Partners

    Image Credits