Skip to main content


Metallurgical and Materials Transactions A

Metallurgical and Materials Transactions A 3/2020

Issue 3/2020

Table of Contents ( 40 Articles )

01-01-2020 | 5th World Congress on Integrated Computational Materials Engineering | Issue 3/2020

Phase-Field Modeling of Microstructure Evolution in the Presence of Bubble During Solidification

Ang Zhang, Jinglian Du, Xiaopeng Zhang, Zhipeng Guo, Qigui Wang, Shoumei Xiong

20-12-2019 | Communication | Issue 3/2020

Heat Treatment Design to Modify the Martensite Misorientation and Obtain Superior Strength–Toughness Combinations

D. M. Field, J. S. Montgomery, K. R. Limmer, K. Cho

10-01-2020 | Communication | Issue 3/2020

Unravelling Microstructure Evolution and Grain Boundary Misorientation in Coarse-Grained Heat-Affected Zone of EH420 Shipbuilding Steel Subject to Varied Welding Heat Inputs

Xiaodong Zou, Jincheng Sun, Hiroyuki Matsuura, Cong Wang

07-01-2020 | Communication | Issue 3/2020

Nanostructured NiTi Shape Memory Alloy Via Ni/Ti Nanolamination

Jintao Zhang, Hua Ding, Minghui Cai, Ning Zhang, Haitao Qu, Shuxia Li, Hongliang Hou, Peng Cao

06-01-2020 | Communication | Issue 3/2020

Additive Manufacturing of Co-Ni-Ga High-Temperature Shape Memory Alloy: Processability and Phase Transformation Behavior

C. Lauhoff, A. Fischer, C. Sobrero, A. Liehr, P. Krooß, F. Brenne, J. Richter, M. Kahlert, S. Böhm, T. Niendorf

06-01-2020 | Communication | Issue 3/2020

Creep Deformation Behavior of a Novel Precipitate-Hardened Ni-Fe-Base Superalloy at 750 °C

P. Zhang, Y. Yuan, Y. F. Gu, Y. Y. Dang, J. B. Yan, J. T. Lu, J. C. Wang

06-12-2019 | Issue 3/2020

Migration Pinning and Roughening Transition of a Ni Grain Boundary

Sung Bo Lee, Jinwook Jung, Seung Jo Yoo, Heung Nam Han

09-12-2019 | Issue 3/2020

Dissolution Behavior and Kinetics of γ′ Phase During Solution Treatment in Powder Metallurgy Nickel-Based Superalloy

Hailiang Huang, Guoquan Liu, Hao Wang, Asad Ullah, Benfu Hu

03-01-2020 | Issue 3/2020

Excess Solute Carbon and Tetragonality in As-Quenched Fe-1Mn-C (C:0.07 to 0.8 Mass Pct) Martensite

Naoki Maruyama, Shinichiro Tabata, Hiroyuki Kawata

13-12-2019 | Issue 3/2020

The Effects of Process Temperatures on the Microstructure and Tensile Properties of Warm-Stamped Nb-Bearing Medium-Mn Steel

Jae-Hoon Nam, Jeongho Han, Young-Kook Lee

11-12-2019 | Issue 3/2020

Grain Boundary Sliding and Strain Rate Sensitivity of Coarse and Fine/Ultrafine Grained 5083 Aluminum Alloys

A. Goyal, V. Doquet, A. Pouya

17-12-2019 | Issue 3/2020

An Investigation of the Deep Drawing Behavior of Automotive Aluminum Alloys at Very Low Temperatures

R. Schneider, R. J. Grant, J. M. Schlosser, W. Rimkus, K. Radlmayr, F. Grabner, Ch. Maier

17-12-2019 | Issue 3/2020

Creep Performance Modeling of Modified 9Cr-1Mo Steels with Oxidation

X. J. Wu, X. Z. Zhang, R. Liu, M. X. Yao

17-12-2019 | Issue 3/2020

A Fatigue Life Model for Predicting Crack Nucleation at Inclusions in Ni-Based Superalloys

Kwai S. Chan

18-12-2019 | Issue 3/2020 Open Access

Three-Dimensional Reconstruction of Planar Deformation Features from Single Electron Micrographs

F. D. León-Cázares, C. Kienl, C. M. F. Rae

20-12-2019 | Issue 3/2020

Sub-zero Temperature Dependence of Tensile Response of Friction Stir Welded Al-Cu-Li (AA2198) Alloy

Niraj Nayan, Manasij Yadava, Nilesh P. Gurao, S. V. S. Narayana Murty, Sivasambu Mahesh, M. J. N. V. Prasad, I. Samajdar

19-12-2019 | Issue 3/2020

Microstructure Evolution of a Simulated Coarse-Grained Heat-Affected Zone of T23 Steel During Aging

Yong Li, Xue Wang

13-12-2019 | Issue 3/2020

High-Resolution Residual Stress Mapping of Magnesium AZ80 Friction Stir Welds for Three Processing Conditions

J. Hiscocks, M. R. Daymond, B. J. Diak, A. P. Gerlich

23-12-2019 | Issue 3/2020 Open Access

Modeling Solid-State Phase Transformations of 13Cr-4Ni Steels in Welding Heat-Affected Zone

J. B. Lévesque, J. Lanteigne, H. Champliaud, D. Paquet

03-01-2020 | Issue 3/2020

Temperature Dependence of Elastic–Plastic Properties of Fine-Pitch SAC 0307 Solder Joint Using Nanoindentation Approach

Azman Jalar, Maria Abu Bakar, Roslina Ismail

02-01-2020 | Issue 3/2020

Solidification Characteristics and Segregation Behavior of Cu-15Ni-8Sn Alloy

Zhongkai Guo, Jinchuan Jie, Shichao Liu, Jiaming Liu, Shipeng Yue, Yubo Zhang, Tingju Li

03-01-2020 | Issue 3/2020

Combined Effects of High Undercooling and Large Cooling Rate on the Microstructure Evolution and Hardening Mechanism of Rapidly Solidified Ti-Al Alloys

Z. C. Luo, H. P. Wang

03-01-2020 | Issue 3/2020

Numerical Prediction and Experimental Validation of the Microstructure of Bearing Steel Ball Formation in Warm Skew Rolling

Yuanming Huo, Tao He, Baoyu Wang, Zhenhua Zheng, Yong Xue

19-12-2019 | Issue 3/2020

Nanocrystalline NiWO4-WO3-WO2.9 Composite Strings: Fabrication, Characterization and their Electrocatalytic Performance for Hydrogen Evolution Reaction

Shaheen Fatima Anis, Ahmad O. Mostafa, Nidal Hilal, Raed Hashaikeh

17-12-2019 | Issue 3/2020

Further Analysis of Dynamic Strain Aging in Context of an Internal State Variable Constitutive Formalism

Paul S. Follansbee

06-01-2020 | Issue 3/2020

Mesoscale Modeling of Dynamic Recrystallization: Multilevel Cellular Automaton Simulation Framework

Fei Chen, Huajia Zhu, Haiming Zhang, Zhenshan Cui

23-12-2019 | Issue 3/2020

Ablation Behavior of SiC/ZrB2 Multilayer Coating Prepared by Plasma Spray Method

Shahla Torabi, Zia Valefi, Naser Ehsani

17-12-2019 | Issue 3/2020

Ultrasonic-Induced Phase Redistribution and Acoustic Hardening for Rotary Ultrasonic Roller Burnished Ti-6Al-4V

Jian Zhao, Zhanqiang Liu, Luanxia Chen, Yang Hua

10-01-2020 | Issue 3/2020

Micro-abrasive Wear Behavior of Nitrided and Multilayer Coated High Vanadium Powder Metallurgy Alloy

E. A. dos S. de Almeida, B. F. Zappelino, R. K. Salvador, F. Correa, B. Nunes, A. P. Krelling, C. E. da Costa, J. C. G. Milan

23-12-2019 | Issue 3/2020

3D Visualization of Top Surface Structure and Pores of 3D Printed Ti-6Al-4V Samples Manufactured with TiC Heterogeneous Nucleation Site Particles

Yoshimi Watanabe, Masafumi Sato, Tadachika Chiba, Hisashi Sato, Naoko Sato, Shizuka Nakano

23-12-2019 | Issue 3/2020

Sintering and Joining of Ni-Based Superalloys via FAST for Turbine Disc Applications

Charis I. Lin, Sebastian J. Niuman, Anil K. Kulkarni, Derek S. King, Jogender Singh, Namiko Yamamoto

01-01-2020 | Issue 3/2020 Open Access

The Effect of Powder Characteristics on Build Quality of High-Purity Tungsten Produced via Laser Powder Bed Fusion (LPBF)

A. C. Field, L. N. Carter, N. J. E. Adkins, M. M. Attallah, M. J. Gorley, M. Strangwood

06-01-2020 | Issue 3/2020

In-Situ High-Energy X-ray Diffraction During a Linear Deposition of 308 Stainless Steel via Wire Arc Additive Manufacture

D. W. Brown, A. Losko, J. S. Carpenter, B. Clausen, J. C. Cooley, V. Livescu, P. Kenesei, J.-S. Park, T. J. Stockman, M. Strantza

03-01-2020 | Issue 3/2020

Devitrification of Mechanically Alloyed Fe-Nb System: Mössbauer Study of the Intermetallic Phases

A. F. Manchón-Gordón, P. Svec, J. J. Ipus, M. Kowalczyk, J. S. Blázquez, C. F. Conde, A. Conde, P. Svec Sr., T. Kulik

06-12-2019 | Issue 3/2020

On the Equilibrium Intermetallic Phase in Mg-Nd-Ag Alloys

Xiaojun Zhao, Zhiqiao Li, Houwen Chen, Rainer Schmid-Fetzer, Jian-Feng Nie

02-01-2020 | Issue 3/2020

Influence of Pore Size and Crystallography on the Small Crack HCF Behavior of an A357-T6 Cast Aluminum Alloy

I. Serrano-Munoz, S. Dancette, C. Verdu, J.-Y. Buffiere

06-01-2020 | Issue 3/2020

In Situ Electron Diffraction and Resistivity Characterization of Solid State Reaction Process in Cu/Al Bilayer Thin Films

Evgeny T. Moiseenko, Roman R. Altunin, Sergey M. Zharkov

23-12-2019 | Correction | Issue 3/2020

Correction to: Network-Strengthened Ti-6Al-4V/(TiC+TiB) Composites: Powder Metallurgy Processing and Enhanced Tensile Properties at Elevated Temperatures

Shaolou Wei, Lujun Huang, Xinting Li, Yang Jiao, Wei Ren, Lin Geng

10-01-2020 | Correction | Issue 3/2020

Correction to: Evolution of Substructure of a Non-equiatomic FeMnCrCo High Entropy Alloy Deformed at Ambient Temperature

A. K. Chandan, S. Tripathy, M. Ghosh, S. G. Chowdhury

13-01-2020 | Correction | Issue 3/2020

Correction to: Advancement in the Pressureless Sintering of CP Titanium Using High-Frequency Induction Heating

Stella Raynova, Yan Collas, Fei Yang, Leandro Bolzoni

Current Publications

Premium Partners

    Image Credits