Metallurgical and Materials Transactions A 7/2020

Nelson Delfino de Campos Neto, Renan Freire de Carvalho Lopes Rocha, Flavio Soares Pereira, Carolina Soares, Felipe Henrique Santa Maria, Marcelo Falcão de Oliveira

05-05-2020 | Issue 7/2020

σ-Phase Formation in Super Austenitic Stainless Steel During Directional Solidification and Subsequent Phase Transformations

Raphaël Marin, Hervé Combeau, Julien Zollinger, Moukrane Dehmas, Bernard Rouat, Aude Lamontagne, Natalia Loukachenko, Lucile Lhenry-Robert

24-04-2020 | Issue 7/2020

A Comprehensive Study on Texture Development and Twin-Related Domain Evolution Following Hot Compression in a Super Austenitic Stainless Steel

K. Arun Babu, C. N. Athreya, Yahya H. Mozumder, V. Subramanya Sarma, Sumantra Mandal

24-04-2020 | Issue 7/2020

Effect of Pre-deformation on Decomposition and Spheroidization of M2C Carbide in High-Speed Steel

Xuefeng Zhou, Weichao Zhang, Zhixia Zheng, Di Liu, Feng Fang, Yiyou Tu, Jianqing Jiang

23-04-2020 | Issue 7/2020

Achievement of High Ductility and Ultra-high Strength of V-Nb Microalloyed Spring Steel by Austempered Multiphase Microstructure

Kui Chen, Zhouhua Jiang, Fubin Liu, Huabing Li, Congpeng Kang, Wenchao Zhang, Ao Wang

04-05-2020 | Issue 7/2020

Corrosion Behavior of Ti-Si-B-C Nanocomposite Hard Coating with Different Si Contents on 4130 Steel

Aparna Shukla, B. Sivakumar, S. K. Mishra

08-05-2020 | Issue 7/2020

In Situ Al-TiC Composites Fabricated by Self-propagating High-Temperature Reaction: Insights on Reaction Pathways and Their Microstructural Signatures

C. W. Reese, A. Gladstein, J. M. Fedors, V. De Andrade, B. Mishra, A. J. Shahani, A. I. Taub

30-04-2020 | Issue 7/2020

Improving High-Temperature Strength of Ti-6Al-2.5Mo-1.5Cr-0.5Fe-0.3Si Titanium Alloy by Cryogenic Pre-treatment and Laser Peening

Jie Sheng, Shu Huang, Muxi Liu, Fengze Dai

14-05-2020 | Issue 7/2020

Influence of Microstructure on the Mechanical Properties of a Pearlitic Steel

B. Bhattacharya, T. Bhattacharyya, A. Haldar

06-05-2020 | Issue 7/2020

In Situ Investigation of the Bainitic Transformation from Deformed Austenite During Continuous Cooling in a Low Carbon Mn-Si-Cr-Mo Steel

William Lemos Bevilaqua, Jérémy Epp, Heiner Meyer, Alexandre Da Silva Rocha, Hans Roelofs

22-04-2020 | Issue 7/2020

A Novel Approach to the Synthesis of Alloy: PEG400 Containing ZnNi and ZnNiCr Alloy Coatings and Their Anticorrosion Performance

A. Tuncay Ozyilmaz, M. Kemal Sangun, Ibrahim Filazi, Cagla Surmelioglu, Gul Ozyilmaz

12-05-2020 | Issue 7/2020

05-05-2020 | Issue 7/2020

Suppression of Discontinuous Precipitation in Cu-Ti Alloys by Aging in a Hydrogen Atmosphere

Satoshi Semboshi, Yasuyuki Kaneno, Takayuki Takasugi, Naoya Masahashi

28-04-2020 | Issue 7/2020

Spatiotemporal Analysis of Nonaffine Displacements in Disordered Solids Sheared Across the Yielding Point

Nikolai V. Priezjev

07-05-2020 | Issue 7/2020

Effect of Electrodeposition Current and Pulse Parameter on Surface Mechanical and Electrochemical Behavior of Ni–W Alloy Coatings

Mahesh Kumar Kolle, Shaik Shajahan, A. Basu

Current Publications

Metallurgical and Materials Transactions A 1/2021

Premium Partners

Image Credits

Springer Professional

Table of Contents ( 40 Articles )

New Opportunities in Refractory Alloys

Challenges and Opportunities in the Selective Laser Melting of Biodegradable Metals for Load-Bearing Bone Scaffold Applications

A Novel High-Strength Zn-3Ag-0.5Mg Alloy Processed by Hot Extrusion, Cold Rolling, or High-Pressure Torsion

Grain Refinement in Surficial Cryogenic Grinding

Influence of Static Magnetic Field on the Microstructure of Nickel-Based Superalloy by Laser-Directed Energy Deposition

Massive Ferrite Causes Toughness Decrease in Low Cr-Mo Steel Weld

Preparation, Properties, and Applications of Lamellar Ni3Si

In Situ Observation of Phase Transformations in the Coarse-Grained Heat-Affected Zone of P91 Heat-Resistant Steel During Simulated Welding Process

Toughening of AISI 410 Stainless Steel Through Quenching and Partitioning and Effect of Prolonged Aging on Microstructure and Mechanical Properties

Forecast of Adiabatic Shear Band Formation in Two Commercial Ultra-high-Strength Armor Steels by Split Hopkinson Pressure Bar

Profiling Microstructure Evolution Roadmap in Heat-Affected Zones of EH36 Shipbuilding Steel Under Controlled Thermal Simulation

Development of Processing Maps for Hot Deformation: Algorithm and Common Errors

Occurrence and Morphology of Martensite in β-Cu-Zn Alloys with Minor Al Additions

Quench Temperature-Dependent Phase Transformations During Nonisothermal Partitioning

Ultrafast Atomic Diffusion Paths in Fine-Grained Nickel Obtained by Spark Plasma Sintering

Effect of Austenite Conditioning on Martensitic Transformation in Commercial Grade Interstitial-Free Steel

Different Evolutions of the Microstructure, Texture, and Mechanical Performance During Tension and Compression of 316L Stainless Steel

Structural Evolution and Micromechanical Properties of Ternary Ni-Fe-Ti Alloy Solidified Under Microgravity Condition

Distribution of Grain Boundary Carbides in Inconel 617 Subjected to Creep at 900 °C and 950 °C

In-Situ SEM Fracture Analysis of W-Eurofer Brazed Joints Under Three-Point Bending Test Configuration

On Constituents of the Periodic Layered Microstructure Developed in the Solid-State Reaction Between Zinc and Co2Si

Microstructure, Crystallographic Orientation and Mechanical Property in AlCoCrFeNi2.1 Eutectic High-Entropy Alloy Under Magnetic Field-Assisted Directional Solidification

Effective Method to Enhance the Glass-Forming Ability of Vitreloy 105 Containing High Oxygen Concentrations

σ-Phase Formation in Super Austenitic Stainless Steel During Directional Solidification and Subsequent Phase Transformations

A Comprehensive Study on Texture Development and Twin-Related Domain Evolution Following Hot Compression in a Super Austenitic Stainless Steel

Effect of Pre-deformation on Decomposition and Spheroidization of M2C Carbide in High-Speed Steel

Achievement of High Ductility and Ultra-high Strength of V-Nb Microalloyed Spring Steel by Austempered Multiphase Microstructure

Corrosion Behavior of Ti-Si-B-C Nanocomposite Hard Coating with Different Si Contents on 4130 Steel

In Situ Al-TiC Composites Fabricated by Self-propagating High-Temperature Reaction: Insights on Reaction Pathways and Their Microstructural Signatures

Improving High-Temperature Strength of Ti-6Al-2.5Mo-1.5Cr-0.5Fe-0.3Si Titanium Alloy by Cryogenic Pre-treatment and Laser Peening

Influence of Microstructure on the Mechanical Properties of a Pearlitic Steel

In Situ Investigation of the Bainitic Transformation from Deformed Austenite During Continuous Cooling in a Low Carbon Mn-Si-Cr-Mo Steel

A Novel Approach to the Synthesis of Alloy: PEG400 Containing ZnNi and ZnNiCr Alloy Coatings and Their Anticorrosion Performance

The Mechanism of Grain Boundary Serration and Fan-Type Structure Formation in Ni-Based Superalloys

Deformation Behavior and Strengthening Mechanisms of Multilayer SUS304/Cr17 Steels with Laminate/Network Interface

Hertzian Indentation Behavior of Electroless Ni-P-Ti Composite Coatings

The Effectiveness of Grain Refinement by Machine Hammer Peening in High Deposition Rate Wire-Arc AM Ti-6Al-4V

Suppression of Discontinuous Precipitation in Cu-Ti Alloys by Aging in a Hydrogen Atmosphere

Spatiotemporal Analysis of Nonaffine Displacements in Disordered Solids Sheared Across the Yielding Point

Effect of Electrodeposition Current and Pulse Parameter on Surface Mechanical and Electrochemical Behavior of Ni–W Alloy Coatings

Current Publications

Issue 1/2021

Issue 12/2020

Issue 11/2020

Issue 10/2020

Issue 9/2020

Issue 8/2020

Issue 7/2020

Issue 6/2020

Issue 5/2020

Issue 4/2020

Premium Partners