Metallurgist 7-8/2022

01-11-2022

Metallurgist Volume 66, Number 7

01-12-2022

Use of Ore-Coal Briquettes in Blast Furnaces

A. M. Bizhanov, S. A. Zagainov

30-11-2022

Experience of Using KGOK Iron Ore Raw Materials at the Nizhny Tagil Metallurgical Combine During Smelting of Open-Hearth Cast Iron

V. A. Mikhalyov

30-11-2022

Heat Transfer in High-Power Electric Arc Furnaces. Part I. Calculation of Thermal Radiation Fluxes of Arcs onto Bath and Heat Exchange in Metal Bath

A. N. Makarov

30-11-2022

Influence of the Process Conditions of Continuous Casting of Steel on the Macrostructural Quality of a Continuously Cast Round Billet for the Production of Railroad Wheels and Axles of Locomotives

A. V. Kuklev, V. V. Tinyakov

30-11-2022

Effect of the Deoxidation Conditions on the Titanium Loss During Electroslag Remelting of Corrosion-Resistant Titanium-Alloyed Steel Under AKF235 Flux

A. V. Amezhnov, V. A. Kutorkina, L. Ya. Levkov, O. N. Baklanova, A. A. Pavlov, A. V. Sobolev, S. A. Balashov, P. S. Yakovleva, I. G. Rodionova

01-12-2022

Possibilities of Measurement Digitalization in Metal Science for the Introduction of Quantitative Measurement to the Evaluation of Structures and Fractures

E. A. Sokolovskaya, A. V. Kudrya, V. Yu. Perezhogin, V. P. Tang, D. F. u. Kodirov, M. I. Sergeyev

30-11-2022

Aspects of Changing the Structure and Hardness of Metal of Heat-Affected Zone During Welding of Low-Carbon High-Strength Steels for Pipes with Increased Deformability

L. A. Efimenko, O. E. Kapustin, A. A. Ramus’, R. O. Ramus’

30-11-2022

Investigation of Industrial 1580 Alloy Sheet Weldability by Friction Stir Welding

V. N. Baranov, P. O. Yuryev, I. L. Konstantinov, A. I. Bezrukikh, E. G. Partyko, A. O. Ivanova

30-11-2022

Effect of Electrolytic-Plasma Surface Treatment on Structure, Mechanical, and Tribological Properties of Grade 1 Wheel Steel

I. M. Kossanova, A. T. Kanayev, M. A. Jaksymbetova, A. U. Akhmedyanov, K. Zh. Kirgizbayeva

30-11-2022

Investigation of Nitinol Alloy Deformation Features in Temperature Range from 500 to 950°C

Ya. I. Kosmatskiy, K. Yu. Yakovleva, N. V. Fokin, B. V. Barichko

30-11-2022

Investigation of Influence of Various Plasticizers and Alloying Additives on Technological Properties of Powder Mixture of Steel SP35G2N4D2M

Jh. V. Еremeeva, Y. S. Ter-Vaganyants, G. H. Sharipzyanova, O. V. Korznikov, N. M. Nitkin

30-11-2022

Production of Intermetallic Compounds for Alloying Aluminum Alloys

R. A. Seytenov, V. A. Lipin, S. Yu. Petrovich, M. V. Trotsky

01-12-2022

Simulation of the Thermal Performance of Regenerative Heat Exchanger for Recovering the Heat of Combustion of Converter Gas

S. V. Lukin, N. N. Shestakov, D. V. Porodovsky, A. A. Razinkov

30-11-2022

Modernization of Cooling System for Mandrel of PQF Continuous Rolling Mill at JSC Tagmet

I. T. Bilan, B. A. Romantsev, S. S. Belonozhko, A. A. Mescheryachenko, K. V. Trubnikov, M. P. Baylov

01-11-2022

Metallurgist Volume 66, Number 8

30-11-2022

Prereduction of Chromite Raw Materials by the Höganäs Method

A. E. Shotanov, A. V. Roshchin, V. P. Panfilov, N. Z. Nurgali, M. S. Dossekenov

30-11-2022

Studying the Factors Affecting the Corrosion Resistance of Cold-Rolled Products of HSLA Steels of 340–420 Strength Classes

N. A. Arutyunyan, I. G. Rodionova, A. V. Amezhnov, Yu. S. Gladchenkova, A. S. Mel’nichenko, A. A. Papshev

30-11-2022

Effect of Cooling Rate during Heat Treatment on Martensitic-Bainitic Class Alloy Steel Microstructure and Properties

M. V. Maisuradze, A. A. Kuklina, M. A. Ryzhkov, D. I. Lebedev, E. V. Antakov

30-11-2022

Investigation of Low-Carbon Pipeline Steel Weldability by Welding Thermal Cycle Simulation

L. I. Efron, P. P. Stepanov, S. V. Zharkov, A. V. Chastukhin

01-12-2022

Statistical Comparison of Mechanical Properties of VT6 Alloy Bars with Different Structures

Yu. B. Egorova, S. V. Skvortsova, L. V. Davydenko, O. N. Gvozdeva

30-11-2022

Evaluation of Heat Resistance and Thermal Conductivity of Ni–Cr–Al System Layered Coatings

V. G. Shmorgun, A. I. Bogdanov, A. O. Taube, V. P. Kulevich

30-11-2022

Structure and Properties of Materials Produced by SPS Sintering of Nickel Aluminide Powders PN85U15 and PN75U23V

L. I. Shevtsova, M. A. Esikov, V. S. Lozhkin, A. Yu. Larichkin, D. S. Terentyev, A. Yu. Ognev, V. O. Drozdov, D. A. Nemolochnov

30-11-2022

Influence of Magnesium Alloy Surface Preparation Quality During Plasma Welding with a Reverse Polarity Current on Deposited Metal Structure and Properties

D. S. Belinin, Yu. D. Shchitsyn, E. A. Krivonosova, A. N. Yurchenko, M. V. Pichkalev, Yu. Shengfu

30-11-2022

Study of Properties and Structure of Silicon Bronze CuSi3Mn1 (C65500) Wire at Various Stages of Its Production by Continuous Casting and Subsequent Drawing

S. A. Tavolzhanskii, E. D. Vedenkin, I. V. Plisetskaya, V. E. Bazhenov, A. A. Nikitina

30-11-2022

Influence of Packing and Parameters of Uniaxial Compaction of Spherical Wax Elements on Stress-Strain State of Compact

S. G. Zhilin, N. A. Bogdanova, O. N. Komarov

30-11-2022

The Features of Combining Horizontal Continuous Casting with Simultaneous Metal Deformation in Solid-Liquid State

A. M. Sergeeva, N. S. Lovizin

30-11-2022

Metallurgical Processes at the Recycling of Aluminum Matrix Composites Via Direct Remelting

E. S. Prusov, V. B. Deev, A. V. Aborkin, D. V. Bokaryov, A. V. Kireev

30-11-2022

Reduction of Emissions of Resinous Substances in Extraction of Aluminum by Electrolysis

V. V. Kondrat’ev, A. D. Kolosov, E. A. Guseva, N. V. Martyushev, A. I. Karlina

30-11-2022

Review of Methods for Obtaining Rhenium from Man-Made Waste and Secondary Raw Materials

Zh. B. Shaimerden, N. Zhumakynbai, F. A. Berdikulova, B. G. Ondiris, A. G. Khamidulla

30-11-2022

High-valued and deep utilization technology of copper slag

Hao Xiao-Dong, Zhang Jun, Zhou He-Min

Springer Professional

Table of Contents (31 Articles)

Metallurgist Volume 66, Number 7

Use of Ore-Coal Briquettes in Blast Furnaces

Experience of Using KGOK Iron Ore Raw Materials at the Nizhny Tagil Metallurgical Combine During Smelting of Open-Hearth Cast Iron

Heat Transfer in High-Power Electric Arc Furnaces. Part I. Calculation of Thermal Radiation Fluxes of Arcs onto Bath and Heat Exchange in Metal Bath

Influence of the Process Conditions of Continuous Casting of Steel on the Macrostructural Quality of a Continuously Cast Round Billet for the Production of Railroad Wheels and Axles of Locomotives

Effect of the Deoxidation Conditions on the Titanium Loss During Electroslag Remelting of Corrosion-Resistant Titanium-Alloyed Steel Under AKF235 Flux

Possibilities of Measurement Digitalization in Metal Science for the Introduction of Quantitative Measurement to the Evaluation of Structures and Fractures

Aspects of Changing the Structure and Hardness of Metal of Heat-Affected Zone During Welding of Low-Carbon High-Strength Steels for Pipes with Increased Deformability

Investigation of Industrial 1580 Alloy Sheet Weldability by Friction Stir Welding

Effect of Electrolytic-Plasma Surface Treatment on Structure, Mechanical, and Tribological Properties of Grade 1 Wheel Steel

Investigation of Nitinol Alloy Deformation Features in Temperature Range from 500 to 950°C

Investigation of Influence of Various Plasticizers and Alloying Additives on Technological Properties of Powder Mixture of Steel SP35G2N4D2M

Production of Intermetallic Compounds for Alloying Aluminum Alloys

Simulation of the Thermal Performance of Regenerative Heat Exchanger for Recovering the Heat of Combustion of Converter Gas

Modernization of Cooling System for Mandrel of PQF Continuous Rolling Mill at JSC Tagmet

Metallurgist Volume 66, Number 8

Prereduction of Chromite Raw Materials by the Höganäs Method

Studying the Factors Affecting the Corrosion Resistance of Cold-Rolled Products of HSLA Steels of 340–420 Strength Classes

Effect of Cooling Rate during Heat Treatment on Martensitic-Bainitic Class Alloy Steel Microstructure and Properties

Investigation of Low-Carbon Pipeline Steel Weldability by Welding Thermal Cycle Simulation

Statistical Comparison of Mechanical Properties of VT6 Alloy Bars with Different Structures

Evaluation of Heat Resistance and Thermal Conductivity of Ni–Cr–Al System Layered Coatings

Structure and Properties of Materials Produced by SPS Sintering of Nickel Aluminide Powders PN85U15 and PN75U23V

Influence of Magnesium Alloy Surface Preparation Quality During Plasma Welding with a Reverse Polarity Current on Deposited Metal Structure and Properties

Study of Properties and Structure of Silicon Bronze CuSi3Mn1 (C65500) Wire at Various Stages of Its Production by Continuous Casting and Subsequent Drawing

Influence of Packing and Parameters of Uniaxial Compaction of Spherical Wax Elements on Stress-Strain State of Compact

The Features of Combining Horizontal Continuous Casting with Simultaneous Metal Deformation in Solid-Liquid State

Metallurgical Processes at the Recycling of Aluminum Matrix Composites Via Direct Remelting

Reduction of Emissions of Resinous Substances in Extraction of Aluminum by Electrolysis

Review of Methods for Obtaining Rhenium from Man-Made Waste and Secondary Raw Materials

High-valued and deep utilization technology of copper slag

Current Publications

Issue 9-10/2023

Issue 7-8/2022

Issue 5-6/2022

Issue 3-4/2022

Issue 1-2/2022

Issue 11-12/2022

Issue 9-10/2022

Issue 7-8/2021

Issue 5-6/2021

Issue 3-4/2021

Premium Partners