Skip to main content
Top

2019 | OriginalPaper | Chapter

2. Metallurgy of Steels

Authors : Barıs Çetin, Halim Meço

Published in: Hot Stamping of Ultra High-Strength Steels

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

In hot stamping, typically, C-Mn-B alloyed steels are used and the process involves phase transformations. Thus, a clear understanding of the effects of alloying elements, different phases of steels, and their kinematics are critical for comprehensive understanding of the process.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference K.H. Grote, E.K. Antonsson, Springer Handbook of Mechanical Engineering (Springer, Würzburg, 2009)CrossRef K.H. Grote, E.K. Antonsson, Springer Handbook of Mechanical Engineering (Springer, Würzburg, 2009)CrossRef
2.
go back to reference W.D. Callister, D.G. Rethwisch, Fundamentals of Materials Science and Engineering, vol. 21 (Wiley, New York, 2013) W.D. Callister, D.G. Rethwisch, Fundamentals of Materials Science and Engineering, vol. 21 (Wiley, New York, 2013)
3.
go back to reference B.C. De Cooman, O. Kwon, K.G. Chin, State-of-the-knowledge on TWIP steel. Mater. Sci. Technol. 28(5), 513–527 (2012)CrossRef B.C. De Cooman, O. Kwon, K.G. Chin, State-of-the-knowledge on TWIP steel. Mater. Sci. Technol. 28(5), 513–527 (2012)CrossRef
4.
go back to reference G.E. Totten, Steel Heat Treatment: Metallurgy and Technologies (CRC Press, Boca Raton, 2006) G.E. Totten, Steel Heat Treatment: Metallurgy and Technologies (CRC Press, Boca Raton, 2006)
5.
go back to reference G. Krauss, Deformation and fracture in martensitic carbon steels tempered at low temperatures. Metall. Mater. Trans. B 32(2), 205–221 (2001)CrossRef G. Krauss, Deformation and fracture in martensitic carbon steels tempered at low temperatures. Metall. Mater. Trans. B 32(2), 205–221 (2001)CrossRef
6.
go back to reference D. Deng, FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effects. Mater. Des. 30(2), 359–366 (2009)CrossRef D. Deng, FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effects. Mater. Des. 30(2), 359–366 (2009)CrossRef
7.
go back to reference D.C. Madeleine, The Pearlite Transformation (Springer, Berlin, 2004), pp. 195–208 D.C. Madeleine, The Pearlite Transformation (Springer, Berlin, 2004), pp. 195–208
8.
go back to reference D.R. Askeland, W.J. Wright, Essentials of Materials Science & Engineering (Cengage Learning, Boston, 2013) D.R. Askeland, W.J. Wright, Essentials of Materials Science & Engineering (Cengage Learning, Boston, 2013)
9.
go back to reference M. Maalekian, The effects of alloying elements on steels (i). Christ. Doppler Lab. Early Stages Precip. 23, 221–230 (2007) M. Maalekian, The effects of alloying elements on steels (i). Christ. Doppler Lab. Early Stages Precip. 23, 221–230 (2007)
10.
go back to reference H. Karbasian, A.E. Tekkaya, A review on hot stamping. J. Mater. Process. Technol. 210(15), 2103–2118 (2010)CrossRef H. Karbasian, A.E. Tekkaya, A review on hot stamping. J. Mater. Process. Technol. 210(15), 2103–2118 (2010)CrossRef
11.
go back to reference M. Naderi, Hot Stamping of Ultra High Strength Steels M. Naderi, Hot Stamping of Ultra High Strength Steels
12.
go back to reference S. Bruschi, G. Liu, Hot Stamping-Comprehensive Materials Processing (Elsevier, Amsterdam, 2014)CrossRef S. Bruschi, G. Liu, Hot Stamping-Comprehensive Materials Processing (Elsevier, Amsterdam, 2014)CrossRef
13.
go back to reference American Society of Metals, ASM Handbook of “Welding and Brazing”, vol. 06, , 2nd edn. (ASM International, 1993) American Society of Metals, ASM Handbook of “Welding and Brazing”, vol. 06, , 2nd edn. (ASM International, 1993)
14.
go back to reference S. Graff, T. Gerber, F.J. Lenze, S. Sikora, About the simulation of microstructure evolution in hot sheet stamping process and the correlation of resulting mechanical properties and crash-performance, in 3rd International Conference on Hot Sheet Metal Forming of High Performance Steel, CHS2, Kassel, Germany (2011), pp. 323–330 S. Graff, T. Gerber, F.J. Lenze, S. Sikora, About the simulation of microstructure evolution in hot sheet stamping process and the correlation of resulting mechanical properties and crash-performance, in 3rd International Conference on Hot Sheet Metal Forming of High Performance Steel, CHS2, Kassel, Germany (2011), pp. 323–330
15.
go back to reference ArcelorMittal Flat Carbon Europe S.A. ArcelorMittal Automotive Product Offer Europe, Android App, V1.0 (2015) ArcelorMittal Flat Carbon Europe S.A. ArcelorMittal Automotive Product Offer Europe, Android App, V1.0 (2015)
16.
go back to reference H. Mohrbacher, Martensitic automotive steel sheet - fundamentals and metallurgical optimization strategies, in Innovative Research in Hot Stamping Technology, vol. 1063. Advanced Materials Research (Trans Tech Publications, 2015), pp. 130–142 H. Mohrbacher, Martensitic automotive steel sheet - fundamentals and metallurgical optimization strategies, in Innovative Research in Hot Stamping Technology, vol. 1063. Advanced Materials Research (Trans Tech Publications, 2015), pp. 130–142
17.
go back to reference American Society of Metals, ASM Handbook of "Heat Treating, 3rd printing", vol. 4 (ASM International, 1995) American Society of Metals, ASM Handbook of "Heat Treating, 3rd printing", vol. 4 (ASM International, 1995)
18.
go back to reference H. Aydin, E. Essadiqi, I.H. Jung, S. Yue, Development of 3rd generation AHSS with medium Mn content alloying compositions. Mater. Sci. Eng.: A 564, 501–508 (2013)CrossRef H. Aydin, E. Essadiqi, I.H. Jung, S. Yue, Development of 3rd generation AHSS with medium Mn content alloying compositions. Mater. Sci. Eng.: A 564, 501–508 (2013)CrossRef
19.
go back to reference Q. Han, W. Bi, X. Jin, W. Xu, L. Wang, X. Xiong, J. Wang, P. Belanger, Low temperature hot forming of medium-Mn steel, in 5th International Conference on Hot Sheet Metal Forming of High Performance Steel, CHS2, Toronto, ON, Canada (2015), pp. 381–389 Q. Han, W. Bi, X. Jin, W. Xu, L. Wang, X. Xiong, J. Wang, P. Belanger, Low temperature hot forming of medium-Mn steel, in 5th International Conference on Hot Sheet Metal Forming of High Performance Steel, CHS2, Toronto, ON, Canada (2015), pp. 381–389
20.
go back to reference W. Alqhadafi, Laser welding of boron and bainitic steels (2012) W. Alqhadafi, Laser welding of boron and bainitic steels (2012)
21.
go back to reference Kangying Zhu, Carla Oberbillig, Céline Musik, Didier Loison, Thierry Iung, Effect of b and b+nb on the bainitic transformation in low carbon steels. Mater. Sci. Eng.: A 528(12), 4222–4231 (2011)CrossRef Kangying Zhu, Carla Oberbillig, Céline Musik, Didier Loison, Thierry Iung, Effect of b and b+nb on the bainitic transformation in low carbon steels. Mater. Sci. Eng.: A 528(12), 4222–4231 (2011)CrossRef
22.
go back to reference M. Naderi, M. Ketabchi, Abbasi M., Bleck W., Analysis of microstructure and mechanical properties of different boron and non-boron alloyed steels after being hot stamped. Procedia Eng. 10, 460–465 (2011)CrossRef M. Naderi, M. Ketabchi, Abbasi M., Bleck W., Analysis of microstructure and mechanical properties of different boron and non-boron alloyed steels after being hot stamped. Procedia Eng. 10, 460–465 (2011)CrossRef
23.
go back to reference ArcelorMittal. Extract from the product catalogue (2015). Accessed 10 June 2015 ArcelorMittal. Extract from the product catalogue (2015). Accessed 10 June 2015
24.
go back to reference SSAB, Docol 22MnB5 - cold rolled boron steel for hardening in water or oil. Product Catalogue (2011) SSAB, Docol 22MnB5 - cold rolled boron steel for hardening in water or oil. Product Catalogue (2011)
25.
go back to reference J.R. Davis, Carbon and Alloy Steels (ASM International, 1996) J.R. Davis, Carbon and Alloy Steels (ASM International, 1996)
26.
go back to reference Salzgitter Flachstahl, 22MnB5 boron alloyed quenched and tempered steel. Product catalogue (2014) Salzgitter Flachstahl, 22MnB5 boron alloyed quenched and tempered steel. Product catalogue (2014)
27.
go back to reference C. Wang, M. Wang, J. Shi, W. Hui and H. Dong, Effect of microstructure refinement on the strength and toughness of low alloy martensitic steel. J. Mater. Sci. Technol. 23(05), 659 (2007) C. Wang, M. Wang, J. Shi, W. Hui and H. Dong, Effect of microstructure refinement on the strength and toughness of low alloy martensitic steel. J. Mater. Sci. Technol. 23(05), 659 (2007)
28.
go back to reference J. Wang, C. Enloe, J. Singh, C. Horvath, Effect of prior austenite grain size on impact toughness of press hardened steel. SAE Int. J. Manuf. 9, 488–493, 04 (2016) J. Wang, C. Enloe, J. Singh, C. Horvath, Effect of prior austenite grain size on impact toughness of press hardened steel. SAE Int. J. Manuf. 9, 488–493, 04 (2016)
29.
go back to reference H. Mohrbacher, Influence of alloy modifications and microstructure on properties and crash performance of press hardened steel components, in 6th International Conference on Hot Sheet Metal Forming of High Performance Steel, CHS2, Atlanta, GA, USA (2017), pp. 213–222 H. Mohrbacher, Influence of alloy modifications and microstructure on properties and crash performance of press hardened steel components, in 6th International Conference on Hot Sheet Metal Forming of High Performance Steel, CHS2, Atlanta, GA, USA (2017), pp. 213–222
30.
go back to reference S. Tateyama, R. Ishio, K. Hayashi, T. Sue, Y. Takemoto, T. Senuma, Microstructures and mechanical properties of V and/or Nb bearing ultrahigh strength hot stamped steel components. Tetsu-to-Hagane 100(9), 1114–1122 (2014)CrossRef S. Tateyama, R. Ishio, K. Hayashi, T. Sue, Y. Takemoto, T. Senuma, Microstructures and mechanical properties of V and/or Nb bearing ultrahigh strength hot stamped steel components. Tetsu-to-Hagane 100(9), 1114–1122 (2014)CrossRef
31.
go back to reference L. Vaissiere, J.P. Laurent, A. Reinhardt, Development of pre-coated boron steel for applications on PSA Peugeot Citroën and Renault bodies in white, in SAE Technical Paper, vol. 7. (SAE International, 2002) L. Vaissiere, J.P. Laurent, A. Reinhardt, Development of pre-coated boron steel for applications on PSA Peugeot Citroën and Renault bodies in white, in SAE Technical Paper, vol. 7. (SAE International, 2002)
32.
go back to reference American Society for Metals. Ohio. Atlas of Isothermal Transformation and Cooling Transformation Diagrams (Metals Park, Ohio, 1977) American Society for Metals. Ohio. Atlas of Isothermal Transformation and Cooling Transformation Diagrams (Metals Park, Ohio, 1977)
33.
go back to reference C. Şimşir, C.H. Gür, An FEM based framework for simulation of thermal treatments: application to steel quenching. Comput. Mater. Sci. 44(2), 588–600 (2008)CrossRef C. Şimşir, C.H. Gür, An FEM based framework for simulation of thermal treatments: application to steel quenching. Comput. Mater. Sci. 44(2), 588–600 (2008)CrossRef
34.
go back to reference F.F. Li, M.W. Fu, J.P. Lin, Effect of cooling path on the phase transformation of boron steel 22MnB5 in hot stamping process. Int. J. Adv. Manuf. Technol. 81(5), 1391–1402 (2015)CrossRef F.F. Li, M.W. Fu, J.P. Lin, Effect of cooling path on the phase transformation of boron steel 22MnB5 in hot stamping process. Int. J. Adv. Manuf. Technol. 81(5), 1391–1402 (2015)CrossRef
35.
go back to reference G.-Z. Quan, T. Wang, L. Zhang, Research on the influence of hot stamping process parameters on phase field evolution by thermal-mechanical phase coupling finite element. Int. J. Adv. Manuf. Technol. 89(1), 145–161 (2017)CrossRef G.-Z. Quan, T. Wang, L. Zhang, Research on the influence of hot stamping process parameters on phase field evolution by thermal-mechanical phase coupling finite element. Int. J. Adv. Manuf. Technol. 89(1), 145–161 (2017)CrossRef
36.
go back to reference C. Koroschetz, K. Eriksson, O. Kragt, A. Ademaj, Production method for locally, graded presshardened components through process integration of a heating technology in combination with appropriate process control, in IDDRG 2016, Linz, Austria (2016), pp. 356–362 C. Koroschetz, K. Eriksson, O. Kragt, A. Ademaj, Production method for locally, graded presshardened components through process integration of a heating technology in combination with appropriate process control, in IDDRG 2016, Linz, Austria (2016), pp. 356–362
Metadata
Title
Metallurgy of Steels
Authors
Barıs Çetin
Halim Meço
Copyright Year
2019
DOI
https://doi.org/10.1007/978-3-319-98870-2_2

Premium Partners