Top

Published in:

2017 | OriginalPaper | Chapter

3. Micro-additive Manufacturing Technology

Authors : Felip Esteve, Djamila Olivier, Qin Hu, Martin Baumers

Published in: Micro-Manufacturing Technologies and Their Applications

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Additive Manufacturing (AM) offers capabilities for producing accurate features in a genuine three dimensional mode in a growing number of technological disciplines, such as regenerative medicine, medical devices, bionics, micro- and opto-electronics. Biochips, MEMS, micro-fluidic devices, photonic crystals, scaffolds for tissue engineering and carriers for drug-delivery devices are some common applications of growing interest. This chapter critically discusses five AM methodologies that were developed initially for deployment in general manufacturing applications and that have demonstrated promise for manufacturing at the micro/nano scale: photopolymerisation processes, powder bed fusion processes, 3D printing via binder jetting, 3D printing via material jetting, filament deposition.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Micro-injection Moulding

next chapter Manufacturing Technology: Micro-machining

MINDS@UW-Madison, International conference on micromanufacturing (ICOMM). Available: http://minds.wisconsin.edu/handle/1793/64713. Accessed 12 May 2015

ASTM F2792—12a, Standard terminology for additive manufacturing technologies. Available: http://www.astm.org/Standards/F2792.htm. Accessed 2 Oct 2015

Tuck CJ, Hague RJM, Ruffo M, Ransley M, Adams P (2008) Rapid manufacturing facilitated customization. Int J Comput Integr Manuf 21(3):245–258CrossRef

Ruffo M, Hague R (2007) Cost estimation for rapid manufacturing—simultaneous production of mixed components using laser sintering. Proc Inst Mech Eng Part B J Eng Manuf 221(11):1585–1591CrossRef

Vaezi M, Seitz H, Yang S (2013) A review on 3D micro-additive manufacturing technologies. Int J Adv Manuf Technol 67:1721–1754CrossRef

Hull CW, Apparatus for production of three-dimensional objects by stereolithography. US 4575330 A, 11 Mar 1986

Ikuta K, Hirowatari K (1993) Real three dimensional micro fabrication using stereo lithography and metal molding. In: Proceedings IEEE micro electro mechanical systems, 1993, pp 42–47

Rapid Prototyping—Stereolithography (SLA). Available: http://www.custompartnet.com/wu/stereolithography. Accessed 2 Oct 2015

Yang H, Ratchev S, Turitto M, Segal J (2009) Rapid manufacturing of non-assembly complex micro-devices by microstereolithography. Tsinghua Sci Technol 14(suppl 1):164–167CrossRef

10.

Stampfl J, Baudis S, Heller C, Liska R, Neumeister A, Kling R, Ostendorf A, Spitzbart M (2008) Photopolymers with tunable mechanical properties processed by laser-based high-resolution stereolithography. J Micromechan Microeng 18(12):125014CrossRef

11.

Limaye AS, Rosen DW (2007) Process planning method for mask projection micro-stereolithography. Rapid Prototyp J 13(2):76–84CrossRef

12.

Xia C, Fang NX (2009) 3D microfabricated bioreactor with capillaries. Biomed Microdevices 11(6):1309–1315CrossRef

13.

Small 3D Printer, Unirapid III. Available: http://www.unirapid.com/eng_ur3.html. Accessed 2 July 2015

14.

Photonic Professional GT—Nanoscribe GmbH. Available: http://www.nanoscribe.de/en/products/photonic-professional-gt/. Accessed 1 July 2015

15.

Zhang YL, Chen QD, Xia H, Sun HB (2010) Designable 3D nanofabrication by femtosecond laser direct writing. Nano Today 5(5):435–448CrossRef

16.

Savla Associates, Photopolymers for additive manufacturing, 2008. Available: http://www.photopolymer.com/stereolithography.htm. Accessed 5 May 2015

17.

Schizas C, Melissinaki V, Gaidukeviciute A, Reinhardt C, Ohrt C, Dedoussis V, Chichkov BN, Fotakis C, Farsari M, Karalekas D (2009) On the design and fabrication by two-photon polymerization of a readily assembled micro-valve. Int J Adv Manuf Technol 48(5–8):435–441

18.

Chichkov BN, Ostendorf A (2006) Two-photon polymerization: a new approach to micromachining. Photonics Spectra 40:72–79

19.

Lin C-L, Lee Y-H, Lin C-T, Liu Y-J, Hwang J-L, Chung T-T, Baldeck PL (2011) Multiplying optical tweezers force using a micro-lever. Opt Express 19(21):20604–20609CrossRef

20.

Deckard CR, Method and apparatus for producing parts by selective sintering, US4863538 A, 5 Sept 1989

21.

Yadroitsev I, Smurov I (2011) Surface morphology in selective laser melting of metal powders. Phys Procedia 12:264–270CrossRef

22.

Kruth J, Levy G, Schindel R, Craeghs T, Yasa E (2008) Consolidation of polymer powders by selective laser sintering. In: International conference on polymers and moulds innovations, 2008

23.

Selective Laser Sintering. Available: http://www.additive3d.com/sls_int.htm. Accessed 2 Oct 2015

24.

Cloots M, Spierings B, Wegener K (2013) Assessing new support minimizing strategies for the additive manufacturing technology SLM. In: International solid freeform fabrication symposium. 12–14 Aug 2013

25.

Spierings AB, Schneider M, Eggenberger R (2011) Comparison of density measurement techniques for additive manufactured metallic parts. Rapid Prototyp J 17(5):380–386CrossRef

26.

Laser C, MLab laser cusing. Available: http://www.concept-laser.de/en/industry/jewellery/machines.html. Accessed 6 July 2015

27.

GmbH, Available: http://www.realizer.com/en/startseite/products. Accessed 6 July 2015

28.

Goebner J (2014) A peek into the EOS Lab : micro laser sintering

29.

Sachs EM, Haggerty JS, Cima MJ, Williams PA (1993) Three-dimensional printing techniques

30.

Three Dimensional Printing. Available: http://www.additive3d.com/3dp.htm. Accessed 8 July 2015

31.

Höganäs 3D Printing Minutiae Precision—TCT—3D Printing, Additive manufacturing and product development technology. Available: http://www.tctmagazine.com/euromold-news/hoganas-minutiae/. Accessed 8 July 2015

32.

Custom_part_net, Ink-jet-printing. Available: http://www.custompartnet.com/wu/ink-jet-printing

33.

Chen C (1998) Inkjet printing of microcomponents : theory, design, characteristics and applications

34.

Stratasys Hearing Aids. Available: http://usglobalimages.stratasys.com/Main/Secure/MaterialSpecsMS/PolyJet-Material-Specs/HAids_3Dmodeling_Letterlow.pdf?v=635011192407864638. Accessed 2 Oct 2015

35.

Rapid Prototyping Laboratory, India. Available: http://ed.iitm.ac.in/~gsaravana/rplab.htm. Accessed 2 Oct 2015

36.

Project Case Study: ProJetTM HD 3000 Success at Sant’Anna. Available: http://www.senztech.cc/showsuccessfulstories.aspx?caseid=88. Accessed 10 July 2015

37.

Additive3d (2014) New Veroglaze Dental Material for Stratasys 3D Printers. Available: http://www.additive3d.com/news/inr2312.htm

38.

Ahn S-H, Montero M, Odell D, Roundy S, Wright PK (2002) Anisotropic material properties of fused deposition modeling ABS. Rapid Prototyp J 8(4):248–257CrossRef

39.

Turner BN, Strong R, Gold SA (2014) A review of melt extrusion additive manufacturing processes: I. Process design and modeling. Rapid Prototyp J 20(3):192–204CrossRef

40.

Duty C (2012) Carbon fiber reinforced polymer additive manufacturing

41.

Ahn S-H, Lee CS, Jeong W (2004) Development of translucent FDM parts by post-processing. Rapid Prototyp J 10(4):218–224CrossRef

42.

nScrypt, Micro Dispense Pump 3Dn Series. Available: http://www.nscrypt.com/micro-dispensing-systems-equipment/direct-print-3dn-machines/index.php. Accessed 1 July 2015

43.

Arafat MT, Gibson I, Li X (2013) State of the art and future direction of additive manufactured scaffolds-based bone tissue engineering. Rapid Prototyp J 20(1):13–26CrossRef

44.

Cloud Color Media, Layered micro-battery created using FDM 3D printing technology, 2014. Available: http://tobuya3dprinter.com/3d-printer-extrusion-made-easy/

Title: Micro-additive Manufacturing Technology
Authors: Felip Esteve
Djamila Olivier
Qin Hu
Martin Baumers
Publisher: Springer International Publishing
Book: Micro-Manufacturing Technologies and Their Applications
Print ISBN: 978-3-319-39650-7

Electronic ISBN: 978-3-319-39651-4

Copyright Year: 2017
DOI: https://doi.org/10.1007/978-3-319-39651-4_3

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners