Skip to main content
Top

2015 | OriginalPaper | Chapter

4. Minimum Impact Mill Technologies

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The Minimum Impact Mill Technologies which can meet the environmental challenges of the pulp and paper industry are discussed in this chapter. These include Optimised wood handling; Dry Debarking; High Yield Pulping Process; Extended Modified cooking; Efficient Brownstock Washing/Improved Pulp Washing; Oxygen Delignification; Ozone bleaching; ECF and TCF bleaching; Fortification of extraction stages with oxygen and hydrogen peroxide; HexA Removal; Condensate Stripping and Recovery; Minimum SO2 and NOx Emissions; Electrostatic Precipitators; Increase in the dry solids content of black liquor; Installation of scrubbers on the recovery boiler; Incineration of odorous gases in the lime kiln; Installation of low NOx technology in auxiliary boilers and the lime kiln; SNCR on bark boilers; Over Fire Air Technique on recovery boilers; Installation of improved washing of lime mud in recausticizing; Efficient Primary, Secondary and Tertiary Waste Treatment (in some special cases); Partial system closure; Minimum Power Consumption; Waste water Recycling and reuse.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literature
go back to reference Agin SA, Svensson Å (1990) Fibre losses – economic consequences for the wood yard processes. In: Proceedings of the 24th Eucepa conference, Stockholm, pp 47–55 Agin SA, Svensson Å (1990) Fibre losses – economic consequences for the wood yard processes. In: Proceedings of the 24th Eucepa conference, Stockholm, pp 47–55
go back to reference Ahluwalia MR, Coffey JM, Norris A (1992) Emerging technology in kraft pulping with digester additives. In: CPPA Spring conference proceedings, Canada, p 1 Ahluwalia MR, Coffey JM, Norris A (1992) Emerging technology in kraft pulping with digester additives. In: CPPA Spring conference proceedings, Canada, p 1
go back to reference Albert RJ (1995) Worldwide status of effluent-free technology for bleached kraft pulp production. In: Proceedings if the international non-chlorine bleaching conference, Amelia Island, FL, March, Paper 9–2 Albert RJ (1995) Worldwide status of effluent-free technology for bleached kraft pulp production. In: Proceedings if the international non-chlorine bleaching conference, Amelia Island, FL, March, Paper 9–2
go back to reference Albert RJ (1997) Effluent-free pulp mill possible with existing fiberline equipment. In: Advances in bleaching technology. Miller Freeman Books, San Francisco, p 133 Albert RJ (1997) Effluent-free pulp mill possible with existing fiberline equipment. In: Advances in bleaching technology. Miller Freeman Books, San Francisco, p 133
go back to reference Alejandro M, Saldivia G (2003) Two-stage O2 delignification system cuts mill’s chemical use. Boosts Pulp Qual January/February, PaperAge, pp 18–24 Alejandro M, Saldivia G (2003) Two-stage O2 delignification system cuts mill’s chemical use. Boosts Pulp Qual January/February, PaperAge, pp 18–24
go back to reference Alliance for Environmental Technology (AET) (2002a) Trends in world bleached chemical pulp production: 1990–2001 Alliance for Environmental Technology (AET) (2002a) Trends in world bleached chemical pulp production: 1990–2001
go back to reference Alliance for Environmental Technology (AET) (2002b) Eco-system recovery: lifting of fish consumption advisories for dioxin downstream of US Pulp Mills – 2002. Update Alliance for Environmental Technology (AET) (2002b) Eco-system recovery: lifting of fish consumption advisories for dioxin downstream of US Pulp Mills – 2002. Update
go back to reference Alliance for Environmental Technology (AET) (2007) Trends in world bleached chemical pulp production: 1990–2007. Alliance for Environmental Technology, Washington, DC Alliance for Environmental Technology (AET) (2007) Trends in world bleached chemical pulp production: 1990–2007. Alliance for Environmental Technology, Washington, DC
go back to reference Allison RW (1979) Effect of ozone on high-temperature thermo-mechanical pulp. Appita J 32(4):279–284 Allison RW (1979) Effect of ozone on high-temperature thermo-mechanical pulp. Appita J 32(4):279–284
go back to reference Allison RW (1980) Low energy pulping through ozone modification. Appita J 34(3):197–204 Allison RW (1980) Low energy pulping through ozone modification. Appita J 34(3):197–204
go back to reference Amendola GA, Vice K, McCubbin N (1996) Design considerations for cost effective kraft and sulfite pulping liquor spill control systems. In: 1996 Tappi minimum effluent mills symposium proceedings. Tappi Press, Atlanta. Amendola GA, Vice K, McCubbin N (1996) Design considerations for cost effective kraft and sulfite pulping liquor spill control systems. In: 1996 Tappi minimum effluent mills symposium proceedings. Tappi Press, Atlanta.
go back to reference American Forest & Paper Assn (AFPA) (1988) Kraft recovery boiler physical and chemical processes, 1988, Textbook sponsored and published by AF&PA. Washington, DC American Forest & Paper Assn (AFPA) (1988) Kraft recovery boiler physical and chemical processes, 1988, Textbook sponsored and published by AF&PA. Washington, DC
go back to reference Aminoff H (1979) A mechanism for the delignifying effect of the anthraquinone in soda pulping. Pap Puu 61(6):29 Aminoff H (1979) A mechanism for the delignifying effect of the anthraquinone in soda pulping. Pap Puu 61(6):29
go back to reference Andbacka S (1991) Experiences of modified continuous cooking. Presentation at the Kamyr symposium in Portugal, April 1991 Andbacka S (1991) Experiences of modified continuous cooking. Presentation at the Kamyr symposium in Portugal, April 1991
go back to reference Andbacka S (1998) The importance of washing in oxygen delignification and TCF bleaching. Pulp Pap Can 99(3):57–60 Andbacka S (1998) The importance of washing in oxygen delignification and TCF bleaching. Pulp Pap Can 99(3):57–60
go back to reference Andbacka S, Svanberg J (1997) Isothermal cooking and pulp washing in a modern fiber line. In: 51th Appita general conference, proceedings 1, Melbourne, Australia Andbacka S, Svanberg J (1997) Isothermal cooking and pulp washing in a modern fiber line. In: 51th Appita general conference, proceedings 1, Melbourne, Australia
go back to reference Anderson JR (1992) Hydrogen peroxide use in chemical pulp bleaching. In: Tappi bleach plant operations short course notes. Tappi Press, Atlanta, p 123 Anderson JR (1992) Hydrogen peroxide use in chemical pulp bleaching. In: Tappi bleach plant operations short course notes. Tappi Press, Atlanta, p 123
go back to reference Anderson JR, Amini B (1996) Hydrogen peroxide bleaching. In: Dence CW, Reeve DW (eds) Pulp bleaching – principles and practice. Tappi Press, Atlanta, p 411 Anderson JR, Amini B (1996) Hydrogen peroxide bleaching. In: Dence CW, Reeve DW (eds) Pulp bleaching – principles and practice. Tappi Press, Atlanta, p 411
go back to reference Andrew J, Chirat C, Mortha G, Grzeskowiak V (2008) Modified ECF bleaching sequences for South African hardwood kraft pulps. In: International pulp bleaching conference, Quebec City, QC, Canada, 2–5 June 2008, pp 55–60 Andrew J, Chirat C, Mortha G, Grzeskowiak V (2008) Modified ECF bleaching sequences for South African hardwood kraft pulps. In: International pulp bleaching conference, Quebec City, QC, Canada, 2–5 June 2008, pp 55–60
go back to reference Andrews DH, Singh RP (1979) Peroxide bleaching. In: Singh RP (ed) The bleaching of pulp, 3rd edn. Tappi Press, Atlanta, pp 211–253 Andrews DH, Singh RP (1979) Peroxide bleaching. In: Singh RP (ed) The bleaching of pulp, 3rd edn. Tappi Press, Atlanta, pp 211–253
go back to reference Annergren G, Rydholm SA, Vardheim S (1963) Influence of raw material and pulping process on the chemical composition and physical properties of paper pulps. Sven Pap 66(6):196–210 Annergren G, Rydholm SA, Vardheim S (1963) Influence of raw material and pulping process on the chemical composition and physical properties of paper pulps. Sven Pap 66(6):196–210
go back to reference Annola A, Hynninen P, Henricson K (1995) Effect of condensate use on bleaching. Pap Ja Puu 77(3) Annola A, Hynninen P, Henricson K (1995) Effect of condensate use on bleaching. Pap Ja Puu 77(3)
go back to reference Anonymous (1997) Closed loop bleaching’. UpTimes no. 1, 1997, p 8 Anonymous (1997) Closed loop bleaching’. UpTimes no. 1, 1997, p 8
go back to reference Arenander S, Wahren D (1983) Impulse drying adds new dimension to water removal. Tappi J 66(9):123–126 Arenander S, Wahren D (1983) Impulse drying adds new dimension to water removal. Tappi J 66(9):123–126
go back to reference Arpalahti O, Engdahl H, Jäntti J, Kiiskilä E, Liiri O, Pekkinen J, Puumalainen R, Sankala H, Vehmaan-Kreula J (2000) Chemical pulping, white liquor preparation. In: Gullichsen J. Fogelholm C-J (ed) Papermaking science and technology, book 6B. Gummerus Printing, Jyväskylä, pp B178–B202 Arpalahti O, Engdahl H, Jäntti J, Kiiskilä E, Liiri O, Pekkinen J, Puumalainen R, Sankala H, Vehmaan-Kreula J (2000) Chemical pulping, white liquor preparation. In: Gullichsen J. Fogelholm C-J (ed) Papermaking science and technology, book 6B. Gummerus Printing, Jyväskylä, pp B178–B202
go back to reference Aurell R, Hartler N (1963) Sulphate cooking with the addition of reducing agents. Part III. The effect of sodium borohydride. Tappi 46(4):209–215 Aurell R, Hartler N (1963) Sulphate cooking with the addition of reducing agents. Part III. The effect of sodium borohydride. Tappi 46(4):209–215
go back to reference Axegård P (1999) Kretsloppsanpassad massafabrik-Slutrapport, KAM 1 1996–1999, KAMrapport A31, Stiftelsen för Miljöstrategisk forskning Axegård P (1999) Kretsloppsanpassad massafabrik-Slutrapport, KAM 1 1996–1999, KAMrapport A31, Stiftelsen för Miljöstrategisk forskning
go back to reference Axegård P, Norden S, Teder A (1978) Production of pulp for bleaching – some principles. Sven Pap 81(4):97–100, 104 Axegård P, Norden S, Teder A (1978) Production of pulp for bleaching – some principles. Sven Pap 81(4):97–100, 104
go back to reference Axegård P, Carey J, Folke J, Gleadow P, Gullichsen J, Pryke DC, Reeve DW, Swan B, Uloth V (2003) Minimum -impact mills: issues and challenges. In: Stuthridge T, van den Hueval MR (eds) Axegård P, Carey J, Folke J, Gleadow P, Gullichsen J, Pryke DC, Reeve DW, Swan B, Uloth V (2003) Minimum -impact mills: issues and challenges. In: Stuthridge T, van den Hueval MR (eds)
go back to reference Bajpai P (2000) Treatment of pulp and paper mill effluents with anaerobic technology. Pira International, Leatherhead Bajpai P (2000) Treatment of pulp and paper mill effluents with anaerobic technology. Pira International, Leatherhead
go back to reference Bajpai P (2008a) Chemical recovery in pulp and paper making. PIRA International, Leatherhead, 166 pages Bajpai P (2008a) Chemical recovery in pulp and paper making. PIRA International, Leatherhead, 166 pages
go back to reference Bajpai P (2008b) Water recovery in pulp and paper making. PIRA International, Leatherhead Bajpai P (2008b) Water recovery in pulp and paper making. PIRA International, Leatherhead
go back to reference Bajpai (2010) Environmentally friendly production of pulp and paper. Wiley, New York Bajpai (2010) Environmentally friendly production of pulp and paper. Wiley, New York
go back to reference Bajpai P (2012a) Biotechnology in pulp and paper processing. Springer, New York, 412 pp Bajpai P (2012a) Biotechnology in pulp and paper processing. Springer, New York, 412 pp
go back to reference Bajpai P (2012b) Environmentally benign approaches for pulp bleaching, 2nd edn, Elsevier, London Bajpai P (2012b) Environmentally benign approaches for pulp bleaching, 2nd edn, Elsevier, London
go back to reference Bajpai P, Bajpai PK (1999) Recycling of process water in a closed mill systems – an introduction. ISBN 1 85802 277 0, Pira International UK, 104 pages Bajpai P, Bajpai PK (1999) Recycling of process water in a closed mill systems – an introduction. ISBN 1 85802 277 0, Pira International UK, 104 pages
go back to reference Bajpai P, Kumar S, Mishra SP, Mishra OP, Bajpai PK (2005) Improving digester performance through the use of surfactants and AQ. IPPTA Conv Issue 43–53 Bajpai P, Kumar S, Mishra SP, Mishra OP, Bajpai PK (2005) Improving digester performance through the use of surfactants and AQ. IPPTA Conv Issue 43–53
go back to reference Barratt KB (1990) Kraft pulping for the 90s environment. Paper presented at Tappi 90 conference held 5–8 March, 1990 at Atlanta, GA, USA, pp 95–102 Barratt KB (1990) Kraft pulping for the 90s environment. Paper presented at Tappi 90 conference held 5–8 March, 1990 at Atlanta, GA, USA, pp 95–102
go back to reference Beca AMEC (2004) Study report: independent advice on the development of environmental guidelines for any new Bleached Eucalypt Kraft Pulp Mill in Tasmania, prepared for the Resource Planning and Development Commission, Tasmania, Australia Beca AMEC (2004) Study report: independent advice on the development of environmental guidelines for any new Bleached Eucalypt Kraft Pulp Mill in Tasmania, prepared for the Resource Planning and Development Commission, Tasmania, Australia
go back to reference Beca AMEC (2006) Review of ECF and TCF bleaching processes and specific issues raised in the WWF report on Arauco Valdivia. Prepared for Resource Planning and Development Commission, Tasmania, Australia. May 2006 Beca AMEC (2006) Review of ECF and TCF bleaching processes and specific issues raised in the WWF report on Arauco Valdivia. Prepared for Resource Planning and Development Commission, Tasmania, Australia. May 2006
go back to reference Bergnor G, Dahlman O (1998) Influence on pulp quality during the removal of hexenuronic acids In: Proceedings international pulp bleaching conference, Helsinki, Finland, p 185 Bergnor G, Dahlman O (1998) Influence on pulp quality during the removal of hexenuronic acids In: Proceedings international pulp bleaching conference, Helsinki, Finland, p 185
go back to reference Bergnor-Gidnert E (2006) STFI Pac kforsk report, February, 2006 (in Swedish) Bergnor-Gidnert E (2006) STFI Pac kforsk report, February, 2006 (in Swedish)
go back to reference Berry R (1996) Oxidative alkaline extraction. In: Dence CW, Reeve DW (eds) Pulp bleaching – principles and practice. Tappi Press, Atlanta, pp 291–320 Berry R (1996) Oxidative alkaline extraction. In: Dence CW, Reeve DW (eds) Pulp bleaching – principles and practice. Tappi Press, Atlanta, pp 291–320
go back to reference Berthold F, Lindström ME (1997) Polysulfide addition as a means to increase delignification in kraft pulping. Nord Pulp Pap Res J 12(4):230 Berthold F, Lindström ME (1997) Polysulfide addition as a means to increase delignification in kraft pulping. Nord Pulp Pap Res J 12(4):230
go back to reference Bérubé PR, Hall ER (2000) Removal of methanol from evaporator condensate using a high temperature membrane bioreactor: determination of optimal operating temperature and system costs. Pulp Pap Can 101(3):54–58 Bérubé PR, Hall ER (2000) Removal of methanol from evaporator condensate using a high temperature membrane bioreactor: determination of optimal operating temperature and system costs. Pulp Pap Can 101(3):54–58
go back to reference Björk M, Sjögren, Tomas, Lundin T Rickards H, Kochesfahani, SH (2005) Partial borate autocausticizing trial increases capacity at Swedish mill, Tappi J 4(9):15–19 Björk M, Sjögren, Tomas, Lundin T Rickards H, Kochesfahani, SH (2005) Partial borate autocausticizing trial increases capacity at Swedish mill, Tappi J 4(9):15–19
go back to reference Blackwell BR, MacKay WB, Murray FE, Oldham WK (1979) Review of kraft foul condensates, sources, quantities, chemical composition, and environmental effects. Tappi J 62(10):33–37 Blackwell BR, MacKay WB, Murray FE, Oldham WK (1979) Review of kraft foul condensates, sources, quantities, chemical composition, and environmental effects. Tappi J 62(10):33–37
go back to reference Bokström M, Nordén S (1998) Extended oxygen delignification. In: Proceedings of the 1998 international pulp bleaching conference, Helsinki, Finland Bokström M, Nordén S (1998) Extended oxygen delignification. In: Proceedings of the 1998 international pulp bleaching conference, Helsinki, Finland
go back to reference Boman R, Reeves R, Nordgren B (1995) Mills improve bleach results with pressurized peroxide. Pulp Pap 69(10):121–125 Boman R, Reeves R, Nordgren B (1995) Mills improve bleach results with pressurized peroxide. Pulp Pap 69(10):121–125
go back to reference Bonsu AK, Marois J, Rowbottom RS (1986) Standby wet scrubber for kraft digester blow and relief gases. Pulp Paper Can 87(8):T318-T323 (August 1986) Bonsu AK, Marois J, Rowbottom RS (1986) Standby wet scrubber for kraft digester blow and relief gases. Pulp Paper Can 87(8):T318-T323 (August 1986)
go back to reference Borchardt JK, Biancalana RP, Mahoney CL (1997) Improved deresination agents: laboratory and mill results, In: Proceedings of the 1997 Tappi pulping conference, TAPPI Press, Atlanta, pp 395–413 Borchardt JK, Biancalana RP, Mahoney CL (1997) Improved deresination agents: laboratory and mill results, In: Proceedings of the 1997 Tappi pulping conference, TAPPI Press, Atlanta, pp 395–413
go back to reference Botnia Rauma (2009) Air emissions – Botnia Rauma mill. Presentation given during a mission to Finland, 23.02.2009, Botnia Rauma (2009) Air emissions – Botnia Rauma mill. Presentation given during a mission to Finland, 23.02.2009,
go back to reference Bouchard J, Maine C, Berry RM (1996) Kraft pulp bleaching using dimethyldioxirane: stability of the oxidants. Can J Chem 74(2):232 Bouchard J, Maine C, Berry RM (1996) Kraft pulp bleaching using dimethyldioxirane: stability of the oxidants. Can J Chem 74(2):232
go back to reference Bounicore A, Wayne TD (1992) Air pollution engineering manual. Van Nostrand Reinhold, New York Bounicore A, Wayne TD (1992) Air pollution engineering manual. Van Nostrand Reinhold, New York
go back to reference Bowen IJ (1990) Overview of emerging technologies in pulping and bleaching. Tappi J 73(9):205–217 Bowen IJ (1990) Overview of emerging technologies in pulping and bleaching. Tappi J 73(9):205–217
go back to reference Brännland R, Nordén S, Lindström LA (1990) Implementation in full scale – the next step for prenox. Tappi I 73(5):231–237 Brännland R, Nordén S, Lindström LA (1990) Implementation in full scale – the next step for prenox. Tappi I 73(5):231–237
go back to reference Breed D, Shackford LD, Pereira ER, Colodette JL (1995) Cost-effective retrofit of existing bleach plants to ECF and TCF bleached pulp production using a novel peroxide bleaching process. In: 1995 pulping conference, Chicago, IL, USA, 1–5 October, 1995, Book 2, pp 779–788 Breed D, Shackford LD, Pereira ER, Colodette JL (1995) Cost-effective retrofit of existing bleach plants to ECF and TCF bleached pulp production using a novel peroxide bleaching process. In: 1995 pulping conference, Chicago, IL, USA, 1–5 October, 1995, Book 2, pp 779–788
go back to reference Bright D, Hodson P, Lehtinen, K-J, Mckague B, Rodgers J, Solomon K (2003) Evaluation of ecological risks associated with the use of chlorine dioxide for the bleaching of pulp: scientific progress since 1993. In: T Stuthridge, van den Hueval MR, Marvin NA, Slade AH, Gifford J (eds) Environmental impacts of pulp and paper waste streams, SETAC Press, Pensacola Bright D, Hodson P, Lehtinen, K-J, Mckague B, Rodgers J, Solomon K (2003) Evaluation of ecological risks associated with the use of chlorine dioxide for the bleaching of pulp: scientific progress since 1993. In: T Stuthridge, van den Hueval MR, Marvin NA, Slade AH, Gifford J (eds) Environmental impacts of pulp and paper waste streams, SETAC Press, Pensacola
go back to reference Brogdon BN, Hart PW (2012) Chapter 10: Peroxide bleaching. In: Hart PW, Rudie AW (eds) Bleaching of pulp, 5th edn. Tappi Press, Atlanta, pp 273–308 Brogdon BN, Hart PW (2012) Chapter 10: Peroxide bleaching. In: Hart PW, Rudie AW (eds) Bleaching of pulp, 5th edn. Tappi Press, Atlanta, pp 273–308
go back to reference Brown C, Landälv I (2001) The chemrec black liquor recovery technology – a status report. In: International chemical recovery conference, Whistler, Canada, 11–14 June 2001 Brown C, Landälv I (2001) The chemrec black liquor recovery technology – a status report. In: International chemical recovery conference, Whistler, Canada, 11–14 June 2001
go back to reference Buchert J, Teleman A, Harjunpaa V, Tenkanen M, Viikari L, Vuorinen T (1995) Effect of cooking and bleaching on the structure of xylan in conventional pine kraft pulp. Tappi J 78(11):125 Buchert J, Teleman A, Harjunpaa V, Tenkanen M, Viikari L, Vuorinen T (1995) Effect of cooking and bleaching on the structure of xylan in conventional pine kraft pulp. Tappi J 78(11):125
go back to reference Buchert J, Tenkanen M, Tamminen T (2001) Characterization of carboxylic acids during kraft and Superbatch pulping. Tappi J 84(4):1 Buchert J, Tenkanen M, Tamminen T (2001) Characterization of carboxylic acids during kraft and Superbatch pulping. Tappi J 84(4):1
go back to reference Bujanovic B, Cameron J, Yilgor N (2003) Comparative studies of kraft and kraft-borate pulping of black spruce. J Pulp Pap Sci 29(6):190–196 Bujanovic B, Cameron J, Yilgor N (2003) Comparative studies of kraft and kraft-borate pulping of black spruce. J Pulp Pap Sci 29(6):190–196
go back to reference Burgess T (1993) The basics of foul condensate stripping. In: Proceedings of the 1993 kraft recovery operations short course. Tappi J 137–146 Burgess T (1993) The basics of foul condensate stripping. In: Proceedings of the 1993 kraft recovery operations short course. Tappi J 137–146
go back to reference Campo R, Marques P (2009) Celtejo plays in the top division. Results Pulp Pap 3:32–34 Campo R, Marques P (2009) Celtejo plays in the top division. Results Pulp Pap 3:32–34
go back to reference Cannell E, Cockram R (2000) The future of BCTMP. Pulp Pap 74(5):61–76 Cannell E, Cockram R (2000) The future of BCTMP. Pulp Pap 74(5):61–76
go back to reference Canovas RV, Maples GE (1995) Bleach plant closure with the BFR™ process. In: 1995 nonchlorine bleaching conference proceedings. Orlando, Florida Canovas RV, Maples GE (1995) Bleach plant closure with the BFR™ process. In: 1995 nonchlorine bleaching conference proceedings. Orlando, Florida
go back to reference Carre G, Wennerström M (2005) Ozone bleaching – an established technology. IPBC, Stockholm, pp 144–149 Carre G, Wennerström M (2005) Ozone bleaching – an established technology. IPBC, Stockholm, pp 144–149
go back to reference Carreira HJM, Loureiro PEG, Graca M, Carvalho MGVS, Evtuguinet DV (2012) Reductive degradation of residual chromophores in kraft pulp with sodium dithionite. Tappi J 11(3):59–67 Carreira HJM, Loureiro PEG, Graca M, Carvalho MGVS, Evtuguinet DV (2012) Reductive degradation of residual chromophores in kraft pulp with sodium dithionite. Tappi J 11(3):59–67
go back to reference Carter DN, McKenzie DG, Johnson AP, Idner K (1997) Performance parameters of oxygen delignification. TAPPI J 80(10):111–117 Carter DN, McKenzie DG, Johnson AP, Idner K (1997) Performance parameters of oxygen delignification. TAPPI J 80(10):111–117
go back to reference Chai XS, Luo Q, Yoon SH, Zhu JY (2001) The fate of hexanuronic acid groups during kraft pulping of hardwoods. J Pulp Pap Sci 27(12):403 Chai XS, Luo Q, Yoon SH, Zhu JY (2001) The fate of hexanuronic acid groups during kraft pulping of hardwoods. J Pulp Pap Sci 27(12):403
go back to reference Chandra B (1997) Effluent minimization – a little water goes a long way. Tappi J 80(12):37–42 Chandra B (1997) Effluent minimization – a little water goes a long way. Tappi J 80(12):37–42
go back to reference Chen CI (1990) Process for producing kraft pulp for paper using nonionic surface active agents to improve pulp yield, U.S. Patent 4,952,277 Chen CI (1990) Process for producing kraft pulp for paper using nonionic surface active agents to improve pulp yield, U.S. Patent 4,952,277
go back to reference Chen GC (1994) Application of a surfactant as a kraft pulping additive. Tappi 77(2):125–128 Chen GC (1994) Application of a surfactant as a kraft pulping additive. Tappi 77(2):125–128
go back to reference Cheremisinoff NP, Rosenfeld PE (2010) Handbook of pollution prevention and cleaner production vol. 2: best practices in the wood and paper industries, 1st edn. Elsevier, New York Cheremisinoff NP, Rosenfeld PE (2010) Handbook of pollution prevention and cleaner production vol. 2: best practices in the wood and paper industries, 1st edn. Elsevier, New York
go back to reference Chirat C, Lachenal D (1994) Minimizing pulp degradation during totally chlorine free bleaching sequences including an ozone stage. In: 1994 international pulp bleaching conference papers. Canadian Pulp and Paper Association, Montreal Chirat C, Lachenal D (1994) Minimizing pulp degradation during totally chlorine free bleaching sequences including an ozone stage. In: 1994 international pulp bleaching conference papers. Canadian Pulp and Paper Association, Montreal
go back to reference Chirat C, Lachenal D (1997) Pulp producers race to keep up with technology. In: Pate KL (ed) Advances in bleaching technology. Miller Freeman Books, San Francisco, p 20 Chirat C, Lachenal D (1997) Pulp producers race to keep up with technology. In: Pate KL (ed) Advances in bleaching technology. Miller Freeman Books, San Francisco, p 20
go back to reference Chirat C, Nyangiro D, Struga B, Lachenal D (2005) The use of ozone on high kappa softwood and hardwood kraft pulps to improve pulp yield. IPBC, Stockholm, pp 74–80 Chirat C, Nyangiro D, Struga B, Lachenal D (2005) The use of ozone on high kappa softwood and hardwood kraft pulps to improve pulp yield. IPBC, Stockholm, pp 74–80
go back to reference Chirat С (2007). Proceedings of the EFPG days 2007, Grenoble, France Chirat С (2007). Proceedings of the EFPG days 2007, Grenoble, France
go back to reference Cloutier JN, Lecourt M, Petit-Conil M (2009) Ozonisation of TMP – Part I – direct ozone injection in the eye of the secondary refiner In: PACWEST conference, Kamloops, BC, Canada, 10 pages Cloutier JN, Lecourt M, Petit-Conil M (2009) Ozonisation of TMP – Part I – direct ozone injection in the eye of the secondary refiner In: PACWEST conference, Kamloops, BC, Canada, 10 pages
go back to reference Cloutier JN, Lecourt, M, Petit-Conil M (2010) Ozonation of TMP – Part II – interstage treatment of primary TMP in a dedicated reactor In: PACWEST conference, Kamloops, BC, Canada, 9 pages Cloutier JN, Lecourt, M, Petit-Conil M (2010) Ozonation of TMP – Part II – interstage treatment of primary TMP in a dedicated reactor In: PACWEST conference, Kamloops, BC, Canada, 9 pages
go back to reference Colodette JL, Campos AS, Gomide JL (1990) Attempts to use white liquor as the source of alkali in the oxygen delignification of eucalypt kraft pulp. In: 1990 Tappi oxygen delignification symposium notes. Tappi Press, Atlanta, p 145 Colodette JL, Campos AS, Gomide JL (1990) Attempts to use white liquor as the source of alkali in the oxygen delignification of eucalypt kraft pulp. In: 1990 Tappi oxygen delignification symposium notes. Tappi Press, Atlanta, p 145
go back to reference Confederation of European Paper Industries (CEPI) (2009) CEPI Europe’s pulp and paper industry in 2020 and beyond. Carta & Cartiere 14–18 Confederation of European Paper Industries (CEPI) (2009) CEPI Europe’s pulp and paper industry in 2020 and beyond. Carta & Cartiere 14–18
go back to reference Cooper CD, Alley FC (1986) Air pollution control: a design approach. Waveland Press, Prospect Heights Cooper CD, Alley FC (1986) Air pollution control: a design approach. Waveland Press, Prospect Heights
go back to reference Costa MM, Colodette JL (2002) The effect of kraft pulp composition on its bleachability. In: TAPPI international pulp bleaching conference, 2002. Ortland, Oregon, USA Costa MM, Colodette JL (2002) The effect of kraft pulp composition on its bleachability. In: TAPPI international pulp bleaching conference, 2002. Ortland, Oregon, USA
go back to reference Courchene CE (1998) The tried, the true and the new – getting more pulp from chips – modifications to the kraft process for increased yield. In: Proceedings of the breaking the pulp yield barrier symposium, 1998. Tappi Press, Atlanta, pp 11–20 Courchene CE (1998) The tried, the true and the new – getting more pulp from chips – modifications to the kraft process for increased yield. In: Proceedings of the breaking the pulp yield barrier symposium, 1998. Tappi Press, Atlanta, pp 11–20
go back to reference Croon I, Andrews DH (1971) Advances in oxygen bleaching, Part I. Demonstration of its feasibility and scope. Tappi 54(11):1892–1898 Croon I, Andrews DH (1971) Advances in oxygen bleaching, Part I. Demonstration of its feasibility and scope. Tappi 54(11):1892–1898
go back to reference Crotogino RH, Poirier NA, Trinh DT (1987) The principles of pulp washing. Tappi J 70(6):95–103 Crotogino RH, Poirier NA, Trinh DT (1987) The principles of pulp washing. Tappi J 70(6):95–103
go back to reference Dallons VJ, Hoy DR, Messmer RA, Crawford RJ (1990) Chloroform formation and release from pulp bleaching. Results of field measurements. Tappi J 73(6):91–95 Dallons VJ, Hoy DR, Messmer RA, Crawford RJ (1990) Chloroform formation and release from pulp bleaching. Results of field measurements. Tappi J 73(6):91–95
go back to reference De Beer JG (1998) Potential for industrial energy efficiency Improvement in the long term. PhD thesis Utrecht University, Department of Science, Technology, and Society De Beer JG (1998) Potential for industrial energy efficiency Improvement in the long term. PhD thesis Utrecht University, Department of Science, Technology, and Society
go back to reference de Choudens C, Monzie P (1978) Pâtes TMP. Traitement par l’ozone, Atip 32(9):350–359 de Choudens C, Monzie P (1978) Pâtes TMP. Traitement par l’ozone, Atip 32(9):350–359
go back to reference DeMartini Nl (2010) Final summary report on nitrogen oxide emissions from Finnish pulp mills. Finnish Recovery Boiler Committee, 2010 DeMartini Nl (2010) Final summary report on nitrogen oxide emissions from Finnish pulp mills. Finnish Recovery Boiler Committee, 2010
go back to reference Desprez F, Devenyns J, Troughton N (1993) One stage hydrogen peroxide full bleaching of previously delignified soft wood kraft pulp. In: Tappi pulping conference proceedings. Tappi Press, Atlanta, p. 443 Desprez F, Devenyns J, Troughton N (1993) One stage hydrogen peroxide full bleaching of previously delignified soft wood kraft pulp. In: Tappi pulping conference proceedings. Tappi Press, Atlanta, p. 443
go back to reference Devenyns J, Chauveheid E (1997) Uronic acid and metal control. In: 9th international symposium on wood and pulping chemistry. Montreal, QC, Canada, pp M5-1 Devenyns J, Chauveheid E (1997) Uronic acid and metal control. In: 9th international symposium on wood and pulping chemistry. Montreal, QC, Canada, pp M5-1
go back to reference Devenyns J, Desprez FS, Troughton N (1993) Peroxygen bleaching and prebleaching technologies for step wise conversion from conventional chlorine bleaching via ECF to TCF. In: Tappi pulping conference proceedings. Tappi Press, Atlanta, p 341 Devenyns J, Desprez FS, Troughton N (1993) Peroxygen bleaching and prebleaching technologies for step wise conversion from conventional chlorine bleaching via ECF to TCF. In: Tappi pulping conference proceedings. Tappi Press, Atlanta, p 341
go back to reference Diaconescu V, Petrovan S (1976) Kinetics of sulfate pulping with addition of sodium borohydride. Cellul Chem Technol 10(3):357–378 Diaconescu V, Petrovan S (1976) Kinetics of sulfate pulping with addition of sodium borohydride. Cellul Chem Technol 10(3):357–378
go back to reference Dimmel DR (1995) Electron-transfer reactions in pulping systems. (1). Theory and applicability to anthraquinone pulping, Institute of Paper Chemistry. J Wood Chem Technol 5(1):1–14 Dimmel DR (1995) Electron-transfer reactions in pulping systems. (1). Theory and applicability to anthraquinone pulping, Institute of Paper Chemistry. J Wood Chem Technol 5(1):1–14
go back to reference Dimmel DR, Schuller LF (1986) Structural/reactivity studies (II): reactions of lignin model compounds with pulping additives. J Wood Chem Technol 6(4):565 Dimmel DR, Schuller LF (1986) Structural/reactivity studies (II): reactions of lignin model compounds with pulping additives. J Wood Chem Technol 6(4):565
go back to reference Dubé M, McLean R, MacLatchy D, Savage P (2000) Reverse osmosis treatment: effects on effluent quality. Pulp Pap Can 101:8 Dubé M, McLean R, MacLatchy D, Savage P (2000) Reverse osmosis treatment: effects on effluent quality. Pulp Pap Can 101:8
go back to reference Durai-Swamy K, Mansour MN, Warren DW (1991) Pulsed combustion process for black liquor gasification, U.S. DOE report DOE/CE/40893-T1 (DE92003672) Durai-Swamy K, Mansour MN, Warren DW (1991) Pulsed combustion process for black liquor gasification, U.S. DOE report DOE/CE/40893-T1 (DE92003672)
go back to reference Eckert B, Turpin D, Dunn J (2005) Improving fiber yield through borate autocausticizing, Improving fiber yield through borate autocausticizing, Tappi/Solut April 2005, pp 33–34 Eckert B, Turpin D, Dunn J (2005) Improving fiber yield through borate autocausticizing, Improving fiber yield through borate autocausticizing, Tappi/Solut April 2005, pp 33–34
go back to reference EIPPCB (2011) Assessment of the data collection on air emissions from European kraft pulp mills, February – April 2011, 2011. European Commission, Spain EIPPCB (2011) Assessment of the data collection on air emissions from European kraft pulp mills, February – April 2011, 2011. European Commission, Spain
go back to reference Eiras KMM, Colodette JL (2003) Eucalyptus kraft pulp bleaching with chlorine dioxide at high temperature. JPPS 29(2):62–64 Eiras KMM, Colodette JL (2003) Eucalyptus kraft pulp bleaching with chlorine dioxide at high temperature. JPPS 29(2):62–64
go back to reference Ek M, Axegård P, Bergnor E, Ekholm U (1994) The role of metal ions in TCF-bleaching of softwood pulps. In: Tappi pulping conference proceedings. Tappi Press, Atlanta Ek M, Axegård P, Bergnor E, Ekholm U (1994) The role of metal ions in TCF-bleaching of softwood pulps. In: Tappi pulping conference proceedings. Tappi Press, Atlanta
go back to reference Elaahi A, Lowitt HE (1988) The U.S. pulp and paper industry: an energy perspective. U.S. Department of Energy, Washington, DC Elaahi A, Lowitt HE (1988) The U.S. pulp and paper industry: an energy perspective. U.S. Department of Energy, Washington, DC
go back to reference Emilsson K, Håkansson M, Danielsson G (1997) Extended stripping and usage of evaporator condensates at Varo Mill, Sweden. In: 1997 Tappi minimum effluent mills symposium proceedings. Tappi Press, Atlanta Emilsson K, Håkansson M, Danielsson G (1997) Extended stripping and usage of evaporator condensates at Varo Mill, Sweden. In: 1997 Tappi minimum effluent mills symposium proceedings. Tappi Press, Atlanta
go back to reference Engstrom JH (1996) Black liquor impregnation and iso thermal cooking. Pap Asia 12(2):18–21 Engstrom JH (1996) Black liquor impregnation and iso thermal cooking. Pap Asia 12(2):18–21
go back to reference Environment Canada (1992a) Aquatic effects monitoring requirements. Report EPS 1/RM/18, Environment Canada, Ottawa, ON, Canada, 1992 Environment Canada (1992a) Aquatic effects monitoring requirements. Report EPS 1/RM/18, Environment Canada, Ottawa, ON, Canada, 1992
go back to reference Environment Canada (1992b) Reference method for the determination of polychlorinated dibenzo-para-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in pulp and paper mill effluents, Report EPS 1/RM/19, Environment Canada, Ottawa, ON, Canada, 1992 Environment Canada (1992b) Reference method for the determination of polychlorinated dibenzo-para-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in pulp and paper mill effluents, Report EPS 1/RM/19, Environment Canada, Ottawa, ON, Canada, 1992
go back to reference Enz SM, Emmerling F (1987) North America’s first fully integrated, medium. consistency oxygen delignification stage. Tappi J 70(6):105–112 Enz SM, Emmerling F (1987) North America’s first fully integrated, medium. consistency oxygen delignification stage. Tappi J 70(6):105–112
go back to reference EPA, NCASI (1995) Survey of recovery furnaces in the kraft pulp sector, carried out by NCASI in cooperation with EPA in 1994–1995 EPA, NCASI (1995) Survey of recovery furnaces in the kraft pulp sector, carried out by NCASI in cooperation with EPA in 1994–1995
go back to reference Eriksson E, Sjöström E (1968) The influence of acid groups on the physical properties of high-yield pulps. Tappi J 51(1):56 Eriksson E, Sjöström E (1968) The influence of acid groups on the physical properties of high-yield pulps. Tappi J 51(1):56
go back to reference Ernerfeldt B, Södersten PA, Eriksson HO, Näsholm AS (1999) Bleach plant presses reduce chemical consumption. In: 6th international conference on newly available technologies, Stockholm Ernerfeldt B, Södersten PA, Eriksson HO, Näsholm AS (1999) Bleach plant presses reduce chemical consumption. In: 6th international conference on newly available technologies, Stockholm
go back to reference European Commission (2001) Integrated Pollution Prevention and Control (IPPC). Reference document on best available techniques in the pulp and paper industry. Institute for Prospective Technological Studies, Seville European Commission (2001) Integrated Pollution Prevention and Control (IPPC). Reference document on best available techniques in the pulp and paper industry. Institute for Prospective Technological Studies, Seville
go back to reference European Commission (2013) Best Available Techniques (BAT) reference document for the production of pulp, paper and board. Industrial Emissions Directive 2010/75/EU (Integrated Pollution Prevention and Control). JOINT RESEARCH CENTRE, Institute for Prospective Technological Studies Sustainable Production and Consumption Unit European IPPC Bureau European Commission (2013) Best Available Techniques (BAT) reference document for the production of pulp, paper and board. Industrial Emissions Directive 2010/75/EU (Integrated Pollution Prevention and Control). JOINT RESEARCH CENTRE, Institute for Prospective Technological Studies Sustainable Production and Consumption Unit European IPPC Bureau
go back to reference Fatehi P, Malinen RO, Ni Y (2009) Removal of hexenuronic acid from eucalyptus kraft pulps during chlorine dioxide- and ozone-based ECF bleaching sequences. Appita 62(3):212–218 Fatehi P, Malinen RO, Ni Y (2009) Removal of hexenuronic acid from eucalyptus kraft pulps during chlorine dioxide- and ozone-based ECF bleaching sequences. Appita 62(3):212–218
go back to reference Finnish BAT Report (1997) The Finnish background report for the EC documentation of best available techniques for pulp and paper industry. The Finnsih environment 96, Ministry of Environment in Finland, Helsinki 1997, ISBN 952-11-0123-7 Finnish BAT Report (1997) The Finnish background report for the EC documentation of best available techniques for pulp and paper industry. The Finnsih environment 96, Ministry of Environment in Finland, Helsinki 1997, ISBN 952-11-0123-7
go back to reference Fleming BI, Kubes GJ, MacLeod JM, Bolker HI (1978) Soda pulping with anthraquinone. A mechanism. Tappi 61(6):43 Fleming BI, Kubes GJ, MacLeod JM, Bolker HI (1978) Soda pulping with anthraquinone. A mechanism. Tappi 61(6):43
go back to reference Ford M, Sharman P (1996) Performance of high yield hardwood pulp is investigated as it should be the choice of the future. Pulp Pap Int 38(10):29 Ford M, Sharman P (1996) Performance of high yield hardwood pulp is investigated as it should be the choice of the future. Pulp Pap Int 38(10):29
go back to reference FRBC (2010) NOx emissions from recovery boilers – why discrepancy between Finnish and Swedish values, Finnish Recovery Boiler Committee, 22.12.2010, 2010, p 12 FRBC (2010) NOx emissions from recovery boilers – why discrepancy between Finnish and Swedish values, Finnish Recovery Boiler Committee, 22.12.2010, 2010, p 12
go back to reference Fujisaki A, Tateishi M, Baba Y, Arakawa Y (2001) Plugging prevention of recovery boiler by character improvement of the ash which used potassium removal equipment (part II). In: Proceedings of the international chemical recovery conference, Pulp and Paper Technical Association of Canada, Tampa Fujisaki A, Tateishi M, Baba Y, Arakawa Y (2001) Plugging prevention of recovery boiler by character improvement of the ash which used potassium removal equipment (part II). In: Proceedings of the international chemical recovery conference, Pulp and Paper Technical Association of Canada, Tampa
go back to reference Fullerton TJ, Wright LJ (1984) Redox catalysis of alkaline pulping by organometallic complexes. Wood Chem Technol 4(1):61–74 Fullerton TJ, Wright LJ (1984) Redox catalysis of alkaline pulping by organometallic complexes. Wood Chem Technol 4(1):61–74
go back to reference Furtado FP, Evtugin DV, Gomes TM (2001) Effect of the acid stage in ECF bleaching of eucalyptus globulus kraft pulp bleachability and strength. Pulp Pap Can 102(12):93 Furtado FP, Evtugin DV, Gomes TM (2001) Effect of the acid stage in ECF bleaching of eucalyptus globulus kraft pulp bleachability and strength. Pulp Pap Can 102(12):93
go back to reference Gabir S, Khristov T (1973) Kraft cooks of papyrus (Cyperus papyrus L.) stalks in the presence of sodium borohydride. Tselul Khartiya 4(6):12–18 Gabir S, Khristov T (1973) Kraft cooks of papyrus (Cyperus papyrus L.) stalks in the presence of sodium borohydride. Tselul Khartiya 4(6):12–18
go back to reference Gavrilescu D (2005) Best practices in kraft pulping – benefits and costs. Environ Eng Manag J 4:29–46 Gavrilescu D (2005) Best practices in kraft pulping – benefits and costs. Environ Eng Manag J 4:29–46
go back to reference Gebart R (2006) Improvement Potential in chemical pulping: black liquor gasification. In: Paper presented at the IEA-WBCSD workshop on energy efficient technologies and CO2 reduction potentials in the pulp and paper industry, Paris, France Gebart R (2006) Improvement Potential in chemical pulping: black liquor gasification. In: Paper presented at the IEA-WBCSD workshop on energy efficient technologies and CO2 reduction potentials in the pulp and paper industry, Paris, France
go back to reference Gellerstedt G (2003) Condensation in kraft pulping. A reality?. In: 12th International Symposium on Wood and Pulping Chemistry (ISWPC) Madison, USA, June 9–12, 2004, Vol I, 1 Gellerstedt G (2003) Condensation in kraft pulping. A reality?. In: 12th International Symposium on Wood and Pulping Chemistry (ISWPC) Madison, USA, June 9–12, 2004, Vol I, 1
go back to reference Genco JM, van Heiningen A, Miller W (2012) Chapter 2: Oxygen delignification, the bleaching of pulp. In: Hart P, Rudie A (eds) TAPPI Press, Atlanta Genco JM, van Heiningen A, Miller W (2012) Chapter 2: Oxygen delignification, the bleaching of pulp. In: Hart P, Rudie A (eds) TAPPI Press, Atlanta
go back to reference Germer E, Metais A, Hostachy JC (2011) State-of-the-art industrial ozone bleaching. Tappsa J 6:30–37 Germer E, Metais A, Hostachy JC (2011) State-of-the-art industrial ozone bleaching. Tappsa J 6:30–37
go back to reference Germguard U, Steffes F (1996) Pulp washing in a closed bleached plant. In: Proceedings of the Tappi 1996 minimum effluent mills symposium. Tappi Press, Atlanta, pp 115–118 Germguard U, Steffes F (1996) Pulp washing in a closed bleached plant. In: Proceedings of the Tappi 1996 minimum effluent mills symposium. Tappi Press, Atlanta, pp 115–118
go back to reference Gleadow PL, Hastings C (1995) Closed cycle kraft ECF vs. TCF. In: Proceedings international non-chlorine bleaching conference, Amelia Island, FL, March, Paper 9–1 Gleadow PL, Hastings C (1995) Closed cycle kraft ECF vs. TCF. In: Proceedings international non-chlorine bleaching conference, Amelia Island, FL, March, Paper 9–1
go back to reference Gleadow PL,Vice K, Johnson AP, Sorenson DR, Hastings CR (1996) Mill applications of closed cycle technology. In: Proceedings international non-chlorine bleaching conference, Orlando, FL, March, Paper 11–3 Gleadow PL,Vice K, Johnson AP, Sorenson DR, Hastings CR (1996) Mill applications of closed cycle technology. In: Proceedings international non-chlorine bleaching conference, Orlando, FL, March, Paper 11–3
go back to reference Gomes da Silva Jr F, Duarte FA, Saco VM, dos Santos JT, Bassa A (2002) Ozone based ECF bleaching sequence for eucalyptus pulp: optimization studies. In: TAPPI International pulp bleaching conference. Portland, OR, USA Gomes da Silva Jr F, Duarte FA, Saco VM, dos Santos JT, Bassa A (2002) Ozone based ECF bleaching sequence for eucalyptus pulp: optimization studies. In: TAPPI International pulp bleaching conference. Portland, OR, USA
go back to reference Gorski D, Engstrand P, Hill J, Johansson L (2009) Review: reduction of energy consumption in refining through mechanical pretreatment of wood chips. In: International mechanical pulping conference, Sundsvall Gorski D, Engstrand P, Hill J, Johansson L (2009) Review: reduction of energy consumption in refining through mechanical pretreatment of wood chips. In: International mechanical pulping conference, Sundsvall
go back to reference Gotlieb PM, Nutt WE, Miller SR, Macas TS (1994) Mill experience in high-consistency ozone bleaching of southern pine pulp. Tappi J 77(6):117–124 Gotlieb PM, Nutt WE, Miller SR, Macas TS (1994) Mill experience in high-consistency ozone bleaching of southern pine pulp. Tappi J 77(6):117–124
go back to reference Goyal GC (ed) (1997) Anthraquinone pulping: a Tappi Press anthology of published papers, 1977–1996. Tappi Press, Atlanta Goyal GC (ed) (1997) Anthraquinone pulping: a Tappi Press anthology of published papers, 1977–1996. Tappi Press, Atlanta
go back to reference Goyal G, Jokela V, Munro FC (1994) Low kappa number pulping – mill experiences, In: 1994, Tappi pulping conference. Tappi Press, Atlanta, p 305 Goyal G, Jokela V, Munro FC (1994) Low kappa number pulping – mill experiences, In: 1994, Tappi pulping conference. Tappi Press, Atlanta, p 305
go back to reference Grace TM, Timmer WM (1995) A comparison of alternative black liquor recovery technologies. In: Proceedings of the international chemical recovery conference, Toronto, pp B269 – 275 Grace TM, Timmer WM (1995) A comparison of alternative black liquor recovery technologies. In: Proceedings of the international chemical recovery conference, Toronto, pp B269 – 275
go back to reference Gratzl JS (1980) The action mechanism of anthraquinone in alkaline pulping. EUCEPA symposium “The delignification methods of the future”, Helsinki, paper 12 Gratzl JS (1980) The action mechanism of anthraquinone in alkaline pulping. EUCEPA symposium “The delignification methods of the future”, Helsinki, paper 12
go back to reference Gullichsen J (2000) Fiber line operations. In: Gullichsen J, Fogelholm C-J (eds) Chemical pulping – papermaking science and technology, Book 6A. Fapet Oy, Helsinki, Finland, p A19 Gullichsen J (2000) Fiber line operations. In: Gullichsen J, Fogelholm C-J (eds) Chemical pulping – papermaking science and technology, Book 6A. Fapet Oy, Helsinki, Finland, p A19
go back to reference Gullichsen J, Paulapuro H, Sundholm J (2000) (book editor), Papermaking science and technology, Book 5. Mechanical pulping, Fapet Oy, Helsinki, Finland Gullichsen J, Paulapuro H, Sundholm J (2000) (book editor), Papermaking science and technology, Book 5. Mechanical pulping, Fapet Oy, Helsinki, Finland
go back to reference Gullichsen J, Ilmoniemi E, Kaasalainen H, Manninen TA (2009) Method for feeding high-consistency pulp to a formation support and high-consistency Headbox, WO 2009063135 (A1) Gullichsen J, Ilmoniemi E, Kaasalainen H, Manninen TA (2009) Method for feeding high-consistency pulp to a formation support and high-consistency Headbox, WO 2009063135 (A1)
go back to reference Håkansdotter L, Olm L (2002) Soda-AQ pulping of softwood, the influence of cooking parameters on the properties and bleachability. Pap Puu 84(1):43 Håkansdotter L, Olm L (2002) Soda-AQ pulping of softwood, the influence of cooking parameters on the properties and bleachability. Pap Puu 84(1):43
go back to reference Haller KH (1996) A decision in favor of ECF: what a decision in the German speaking area. In: Proceedings International Non-Chlorine Bleaching Conference, Orlando, FL Haller KH (1996) A decision in favor of ECF: what a decision in the German speaking area. In: Proceedings International Non-Chlorine Bleaching Conference, Orlando, FL
go back to reference Hamm U, Gottshing L (2002) ECF and TCF bleached pulps: a comparison of their environmental impact. German Pulp and Paper Association VDP—INFOR project (No. 19) Hamm U, Gottshing L (2002) ECF and TCF bleached pulps: a comparison of their environmental impact. German Pulp and Paper Association VDP—INFOR project (No. 19)
go back to reference Han Y, Law KN, Lanouette R (2008) Modification of jack pine TMP long fibers by alkaline peroxide –Part 1. Chemical characteristics of fibers and spent liquor. BioResources 3(3):870–880 Han Y, Law KN, Lanouette R (2008) Modification of jack pine TMP long fibers by alkaline peroxide –Part 1. Chemical characteristics of fibers and spent liquor. BioResources 3(3):870–880
go back to reference Harazono K, Kondo R, Sakai K (1996) Bleaching of hardwood kraft pulp with manganese peroxidase from Phanerochaete sordida YK-624 without addition of MnSO4. Appl Environ Microbiol 62(3):913–917 Harazono K, Kondo R, Sakai K (1996) Bleaching of hardwood kraft pulp with manganese peroxidase from Phanerochaete sordida YK-624 without addition of MnSO4. Appl Environ Microbiol 62(3):913–917
go back to reference Hartler N (1959) Sulfate cooking with the addition of reducing agents. I. Preliminary report on the addition of sodium borohydride. Sven Pap 62:467 Hartler N (1959) Sulfate cooking with the addition of reducing agents. I. Preliminary report on the addition of sodium borohydride. Sven Pap 62:467
go back to reference Hatton J (1987) Debarking of frozen wood. Tappi J 70(2):61–66 Hatton J (1987) Debarking of frozen wood. Tappi J 70(2):61–66
go back to reference He Z, Wekesa M, Ni Y (2004a) Pulp properties and effluent characteristics from the Mg(OH)(2)-based peroxide bleaching process. Tappi J 3(12):27–31 He Z, Wekesa M, Ni Y (2004a) Pulp properties and effluent characteristics from the Mg(OH)(2)-based peroxide bleaching process. Tappi J 3(12):27–31
go back to reference He Z, Ni Y, Zhang E (2004b) Further understanding on the cationic demand of dissolved substances during peroxide bleaching of a spruce TMP. J Wood Chem Technol 24(2):153–168 He Z, Ni Y, Zhang E (2004b) Further understanding on the cationic demand of dissolved substances during peroxide bleaching of a spruce TMP. J Wood Chem Technol 24(2):153–168
go back to reference He Z, Qian X, Ni Y (2006a) The tensile strength of bleached mechanical pulps from the Mg(OH)2-based and NaOH-based peroxide bleaching processes. J Pulp Pap Sci 32(1):47–52 He Z, Qian X, Ni Y (2006a) The tensile strength of bleached mechanical pulps from the Mg(OH)2-based and NaOH-based peroxide bleaching processes. J Pulp Pap Sci 32(1):47–52
go back to reference He Z, Wekesa M, Ni Y (2006b) A comparative study of Mg(OH)(2)-based and NaOH-based peroxide bleaching of TMP: anionic trash formation and its impact on filler retention. Pulp Paper Can 107(3):29–32 He Z, Wekesa M, Ni Y (2006b) A comparative study of Mg(OH)(2)-based and NaOH-based peroxide bleaching of TMP: anionic trash formation and its impact on filler retention. Pulp Paper Can 107(3):29–32
go back to reference Headley RL (1996) Pulp cooking developments focus on fiber yield, lower chemical use. Pulp Pap 70(10):49–57 Headley RL (1996) Pulp cooking developments focus on fiber yield, lower chemical use. Pulp Pap 70(10):49–57
go back to reference Heimburger S, Thireault D, Boechler T (2002) International pulp bleaching conference. Tappi Press, Atlanta, p 271 Heimburger S, Thireault D, Boechler T (2002) International pulp bleaching conference. Tappi Press, Atlanta, p 271
go back to reference Helander R, Nilsson B, Bohman G (1994) Developments and progress in ozone bleaching at the Skoghall mill. In: CPPA international pulp bleaching conference papers, CPPA, Montreal, p 289 Helander R, Nilsson B, Bohman G (1994) Developments and progress in ozone bleaching at the Skoghall mill. In: CPPA international pulp bleaching conference papers, CPPA, Montreal, p 289
go back to reference Henricson K (1997) Ahlstrom machinery, AHLTM-stage. A new bleaching stage for kappa reduction and metal profile control, In: Emerging new technologies conference (March 1997), Orlando, USA Henricson K (1997) Ahlstrom machinery, AHLTM-stage. A new bleaching stage for kappa reduction and metal profile control, In: Emerging new technologies conference (March 1997), Orlando, USA
go back to reference Hill J, Sabourn M, Johansson L, Aichinger J (2009) Enhancing fibre development at reduced energy consumption using TMP subprocesses and targeted chemcial application – pilot and commercial scale results, International Mechanical Pulping Conference, Sundsvall, Sweden, May 31–June 4 Hill J, Sabourn M, Johansson L, Aichinger J (2009) Enhancing fibre development at reduced energy consumption using TMP subprocesses and targeted chemcial application – pilot and commercial scale results, International Mechanical Pulping Conference, Sundsvall, Sweden, May 31–June 4
go back to reference Hitchens D, Farrell F, Lindblom J, Triebswetter U (2001) The impact of Best Available Techniques (BAT) in the competitiveness of European industry. European Comission, report EUR 20133 EN. 120 pp Hitchens D, Farrell F, Lindblom J, Triebswetter U (2001) The impact of Best Available Techniques (BAT) in the competitiveness of European industry. European Comission, report EUR 20133 EN. 120 pp
go back to reference Hoddenbagh JA, Wilfing K, Miller K, Hardman D, Tran H, Bair C (2001) Borate autocausticizing – a cost effective technology. In: International chemical recovery conference, Whistler, Canada, 11–14 June 2001, pp 345–53 Hoddenbagh JA, Wilfing K, Miller K, Hardman D, Tran H, Bair C (2001) Borate autocausticizing – a cost effective technology. In: International chemical recovery conference, Whistler, Canada, 11–14 June 2001, pp 345–53
go back to reference Holmbom B, Ekman R, Sjoholm R, Eckerman C, Thornton J (1991) Chemical-changes in peroxide bleaching of mechanical pulps. Papier 45(10A):16–22 Holmbom B, Ekman R, Sjoholm R, Eckerman C, Thornton J (1991) Chemical-changes in peroxide bleaching of mechanical pulps. Papier 45(10A):16–22
go back to reference Holton H (1977) Soda additive softwood pulping: a major new process. Pulp Pap Can 78(10):19 Holton H (1977) Soda additive softwood pulping: a major new process. Pulp Pap Can 78(10):19
go back to reference Homer G, Muguet M, Epiney M, Johnson S (1996) Oxygen, ozone, and chlorine dioxide. In: 82nd annual meeting, technical section, CPPA, Montréal, 1996 Homer G, Muguet M, Epiney M, Johnson S (1996) Oxygen, ozone, and chlorine dioxide. In: 82nd annual meeting, technical section, CPPA, Montréal, 1996
go back to reference Hosoya S, Tomimura Y, Shimada K (1993) Acid treatment as one stage of non chlorine bleaching, In: 7th international symposium on wood and pulping chemistry, vol 1, Beijing, China, p 206 Hosoya S, Tomimura Y, Shimada K (1993) Acid treatment as one stage of non chlorine bleaching, In: 7th international symposium on wood and pulping chemistry, vol 1, Beijing, China, p 206
go back to reference Hostachy JC (2009) Bagasse pulp bleaching with ozone: it’s time to implement green bleaching practice paperex. In: 2009 – international technical conference 4-6th December 2009, New Delhi, India Hostachy JC (2009) Bagasse pulp bleaching with ozone: it’s time to implement green bleaching practice paperex. In: 2009 – international technical conference 4-6th December 2009, New Delhi, India
go back to reference Hostachy JC (2010a) Ozone-enhanced bleaching of softwood kraft pulp, Tappi J 9(8):16–23 Hostachy JC (2010a) Ozone-enhanced bleaching of softwood kraft pulp, Tappi J 9(8):16–23
go back to reference Hostachy JC (2010b) Softwood pulp bleaching with ozone: a new concept to reduce the bleaching chemical cost by 25%, Appita 63(2):92–97 Hostachy JC (2010b) Softwood pulp bleaching with ozone: a new concept to reduce the bleaching chemical cost by 25%, Appita 63(2):92–97
go back to reference Hostachy JC (2010c) Use of ozone in chemical and high yield pulping processes: latest innovations maximizing efficiency and environmental performance. In: 64th Appita annual conference and exhibition, 18–21 April 2010, Melbourne, Australia, pp 349–354 Hostachy JC (2010c) Use of ozone in chemical and high yield pulping processes: latest innovations maximizing efficiency and environmental performance. In: 64th Appita annual conference and exhibition, 18–21 April 2010, Melbourne, Australia, pp 349–354
go back to reference Hsieh JS, Long PX, BaOsman A (2000) Kinetic study of ozone treatment on mechanical pulp. In: Proceedings from the 2000 Tappi pulping/process & product quality conference, Boston, DF MA, Paper 46 Hsieh JS, Long PX, BaOsman A (2000) Kinetic study of ozone treatment on mechanical pulp. In: Proceedings from the 2000 Tappi pulping/process & product quality conference, Boston, DF MA, Paper 46
go back to reference Huber E, Rank P, Rauscher JW, Williamson DF (1995) High black liquor solids firing at pope and talbot. In: Proceedings of the 1995 international chemical recovery pulping conference. TAPPI Press, Toronto. Huber E, Rank P, Rauscher JW, Williamson DF (1995) High black liquor solids firing at pope and talbot. In: Proceedings of the 1995 international chemical recovery pulping conference. TAPPI Press, Toronto.
go back to reference Hupa (2005). Nitrogen oxide emissions from pulp mills and the factors affecting them – a summary of the current knowledge, Report for the Finnish Recovery Boiler Committee, 2005, p. 15 Hupa (2005). Nitrogen oxide emissions from pulp mills and the factors affecting them – a summary of the current knowledge, Report for the Finnish Recovery Boiler Committee, 2005, p. 15
go back to reference Hyoty PA, Ojala ST (1988) High solids black liquor combustion. Tappi J 71(1):108–111 Hyoty PA, Ojala ST (1988) High solids black liquor combustion. Tappi J 71(1):108–111
go back to reference Ibach S (1995). Conversion to High Solids Firing, Proceedings of the International Chemical Recovery Conference, TAPPI Press, Toronto, Ont., Apr. 1995 Ibach S (1995). Conversion to High Solids Firing, Proceedings of the International Chemical Recovery Conference, TAPPI Press, Toronto, Ont., Apr. 1995
go back to reference Imelainen K, Ekholm J, Kukkanen K, Pasola I (1989) A computer controlled recovery boiler burning high dry solids. Pulp Pap Can 90(4):15–20 Imelainen K, Ekholm J, Kukkanen K, Pasola I (1989) A computer controlled recovery boiler burning high dry solids. Pulp Pap Can 90(4):15–20
go back to reference International Energy Agency (IEA) (2009) Energy technology transitions for industry – strategies for the next industrial revolution. International Energy Agency (IEA), Paris International Energy Agency (IEA) (2009) Energy technology transitions for industry – strategies for the next industrial revolution. International Energy Agency (IEA), Paris
go back to reference Istek A, Gonteki E (2009) Utilization of sodium borohydride (NaBH4) in kraft pulping process. J Environ Biol 30(6):5–6 Istek A, Gonteki E (2009) Utilization of sodium borohydride (NaBH4) in kraft pulping process. J Environ Biol 30(6):5–6
go back to reference Jaakko Pöyry Consulting AB (1997) Energy conservation in the pulp and paper industry Jaakko Pöyry Consulting AB (1997) Energy conservation in the pulp and paper industry
go back to reference Jaccard M, Willis Enterprises Associates (1996) Energy conservation potential in six Canadian industries. Natural Resources Canada, Ottawa Jaccard M, Willis Enterprises Associates (1996) Energy conservation potential in six Canadian industries. Natural Resources Canada, Ottawa
go back to reference Jameel H, Gratzl J, Prasad DY, Chivikula S (1995) Extending delignification with AQ/polysulfide. Tappi J 78(9):151–160 Jameel H, Gratzl J, Prasad DY, Chivikula S (1995) Extending delignification with AQ/polysulfide. Tappi J 78(9):151–160
go back to reference Jamieson AG, Fossum G (1976) Influence of oxygen delignification on pulp yields. Appita 29(4):253–256 Jamieson AG, Fossum G (1976) Influence of oxygen delignification on pulp yields. Appita 29(4):253–256
go back to reference Jemaa N, Paleologou M, Thompson R, Richardson B, Brown C, Sheedy M (1999) Chloride removal from the kraft recovery boiler ESP dust using the precipitator dust purification (PDP) system. Pulp Pap Can 100:T219–T226 Jemaa N, Paleologou M, Thompson R, Richardson B, Brown C, Sheedy M (1999) Chloride removal from the kraft recovery boiler ESP dust using the precipitator dust purification (PDP) system. Pulp Pap Can 100:T219–T226
go back to reference Jiang JE (1993) Extended delignification of Southern Pine with polysulfide and anthraquinone. In: Tappi pulping conference proceedings, Atlanta, November 14–18, pp 313–321 Jiang JE (1993) Extended delignification of Southern Pine with polysulfide and anthraquinone. In: Tappi pulping conference proceedings, Atlanta, November 14–18, pp 313–321
go back to reference Jiang JE (1995) Extended delignification of southern pine with anthraquinone and polysulfide, Tappi J 78/2:126 Jiang JE (1995) Extended delignification of southern pine with anthraquinone and polysulfide, Tappi J 78/2:126
go back to reference Johansson B, Mjöberg J, Sandström P, Teder A (1984) Modified continuous kraft pulping – now a reality. Sven Pap 87(10):30–35 Johansson B, Mjöberg J, Sandström P, Teder A (1984) Modified continuous kraft pulping – now a reality. Sven Pap 87(10):30–35
go back to reference Johnson RW, Bird A (1991). CTMP in Fine Papers: Impact of CTMP on Permanence of Alkaline Papers, 1991 Papermakers conference proceedings, TAPPI Press: 267–273. Johnson RW, Bird A (1991). CTMP in Fine Papers: Impact of CTMP on Permanence of Alkaline Papers, 1991 Papermakers conference proceedings, TAPPI Press: 267–273.
go back to reference Johnson T, Gleadow P, Hastings C (1996) Pulping technologies for the 21st century – a North American view. Part 4 emerging technologies and mill closure. Appita 49(2):76–82 Johnson T, Gleadow P, Hastings C (1996) Pulping technologies for the 21st century – a North American view. Part 4 emerging technologies and mill closure. Appita 49(2):76–82
go back to reference Johnson AP, Johnson BI, Gleadow P, Silva FA, Aquilar RM, Hsiang CJ, Araneda H (2008) 21st century fibrelines. In: Proceedings of the international bleaching conference, Quebec City, 2008 Johnson AP, Johnson BI, Gleadow P, Silva FA, Aquilar RM, Hsiang CJ, Araneda H (2008) 21st century fibrelines. In: Proceedings of the international bleaching conference, Quebec City, 2008
go back to reference Jones AR (1983) How bleaching hardwood kraft pulp with oxygen affects the environment. Tappi J 66(12):42–43 Jones AR (1983) How bleaching hardwood kraft pulp with oxygen affects the environment. Tappi J 66(12):42–43
go back to reference Jönsson J (2011) Analysing different technology pathways for the pulp and paper industry in a European energy systems perspective. PhD thesis, Department of Energy and Environment, Chalmers University of Technology, Göteborg, Sweden Jönsson J (2011) Analysing different technology pathways for the pulp and paper industry in a European energy systems perspective. PhD thesis, Department of Energy and Environment, Chalmers University of Technology, Göteborg, Sweden
go back to reference Jönsson J, Ruohonen P, Michel G, Berntsson T (2011) The potential for steam savings and implementation of different biorefinery concepts in Scandinavian integrated TMP and paper mills. Appl Therm Eng 31(13):2107–2114 Jönsson J, Ruohonen P, Michel G, Berntsson T (2011) The potential for steam savings and implementation of different biorefinery concepts in Scandinavian integrated TMP and paper mills. Appl Therm Eng 31(13):2107–2114
go back to reference Joseph JC, White DE (1996) The use of modeling in mill closure activities. In: 1996 Tappi minimum effluent mills symposium proceedings. Tappi Press, Atlanta Joseph JC, White DE (1996) The use of modeling in mill closure activities. In: 1996 Tappi minimum effluent mills symposium proceedings. Tappi Press, Atlanta
go back to reference KAM Report A100 (2003) Ecocyclic pulp mill – “KAM”. Final report 1996–2002 KAM Report A100 (2003) Ecocyclic pulp mill – “KAM”. Final report 1996–2002
go back to reference Kapanen J, Kuusisto L (2002) A new brown stock washing optimization method for economical pulp production, TAPPSA APPW, 2002 Kapanen J, Kuusisto L (2002) A new brown stock washing optimization method for economical pulp production, TAPPSA APPW, 2002
go back to reference Kappel J, Bräuer P, Kittel FP (1994) High consistency ozone bleaching technology. Tappi J 77(6):109 Kappel J, Bräuer P, Kittel FP (1994) High consistency ozone bleaching technology. Tappi J 77(6):109
go back to reference Karlström K (2009) Extended impregnation kraft cooking of softwood: effects on reject, yield, pulping uniformity and physical properties, Lic. thesis, Royal Institute of Technology (KTH), Stockholm, Sweden Karlström K (2009) Extended impregnation kraft cooking of softwood: effects on reject, yield, pulping uniformity and physical properties, Lic. thesis, Royal Institute of Technology (KTH), Stockholm, Sweden
go back to reference Katofsky R, Consonni S, Larson ED (2003) A cost-benefit analysis of black liquor gasification combined cycle systems. In: Proceedings of the Tappi fall technical conference: engineering, pulping & PCE&I, Chicago, 22 p Katofsky R, Consonni S, Larson ED (2003) A cost-benefit analysis of black liquor gasification combined cycle systems. In: Proceedings of the Tappi fall technical conference: engineering, pulping & PCE&I, Chicago, 22 p
go back to reference Katsoulis DE (2002) A survey of applications of polyoxometalates. Chem Rev 98(1):359 Katsoulis DE (2002) A survey of applications of polyoxometalates. Chem Rev 98(1):359
go back to reference Katz G (1993) Anthraquinone and anthraquinone-polysulfide pulping for extended delignification. In: Tappi pulping conference proceedings, Atlanta, November 14–18, pp 323–331 Katz G (1993) Anthraquinone and anthraquinone-polysulfide pulping for extended delignification. In: Tappi pulping conference proceedings, Atlanta, November 14–18, pp 323–331
go back to reference Katz S, Scallan AM (1983) Ozone and caustic soda treatments of mechanical pulp. TAPPI J 66(1):85–87 Katz S, Scallan AM (1983) Ozone and caustic soda treatments of mechanical pulp. TAPPI J 66(1):85–87
go back to reference Kazymov D (2010) Biochemical modification of thermomechanical pulp fibers. Master’s degree program in chemical and process engineering. Lappeenranta University of Technology Kazymov D (2010) Biochemical modification of thermomechanical pulp fibers. Master’s degree program in chemical and process engineering. Lappeenranta University of Technology
go back to reference Kibblewhite RP, Brookes D, Allison RW (1980) Effect of ozone on the fiber characteristics of thermomechanical pulps. Tappi J 63(4):133–136 Kibblewhite RP, Brookes D, Allison RW (1980) Effect of ozone on the fiber characteristics of thermomechanical pulps. Tappi J 63(4):133–136
go back to reference Kignell JE (1989) Process for chemicals and energy recovery from waste liquors, U.S. Patent no. 4,808,264 Kignell JE (1989) Process for chemicals and energy recovery from waste liquors, U.S. Patent no. 4,808,264
go back to reference Kiviaho I (1995) Optimizing oxygen delignification. In: Proceedings of the international non-chlorine bleaching conference, Amelia Island, FL, paper 2–2, p 12 Kiviaho I (1995) Optimizing oxygen delignification. In: Proceedings of the international non-chlorine bleaching conference, Amelia Island, FL, paper 2–2, p 12
go back to reference Kleppe PJ, Kringstad K (1963) Sulfate pulping by the polysulfide process. II. Birch. Norsk Skogind 18(1):13 Kleppe PJ, Kringstad K (1963) Sulfate pulping by the polysulfide process. II. Birch. Norsk Skogind 18(1):13
go back to reference Kleppe PJ, Hm C, Eckert RC (1972) Delignification of high yield pulp with oxygen and alkali, I, preliminary studies on southern pines. Pulp Pap Mag Can 73(12):T400–T404 Kleppe PJ, Hm C, Eckert RC (1972) Delignification of high yield pulp with oxygen and alkali, I, preliminary studies on southern pines. Pulp Pap Mag Can 73(12):T400–T404
go back to reference Knutson I, Lovblad R, Malmström J, De Sousa F, Kringstad KP (1992) Minimizing dioxin formation in mill-scale bleaching of softwood kraft pulp. Tappi J 75(6):112 Knutson I, Lovblad R, Malmström J, De Sousa F, Kringstad KP (1992) Minimizing dioxin formation in mill-scale bleaching of softwood kraft pulp. Tappi J 75(6):112
go back to reference Kochesfahani SH, Bair C (2002) Overcoming recausticizing limitations; mill experiences with borate autocausticization. In: 7th international conference on new available technologies, Stockholm, Sweden, 4–6 June 2002, pp 87–90 Kochesfahani SH, Bair C (2002) Overcoming recausticizing limitations; mill experiences with borate autocausticization. In: 7th international conference on new available technologies, Stockholm, Sweden, 4–6 June 2002, pp 87–90
go back to reference Kochesfahani SH, Bair CM, Kirk M (2006) Partial borate autocausticizing, a new technology in chemical recovery. Appita J 59(2):130–135 Kochesfahani SH, Bair CM, Kirk M (2006) Partial borate autocausticizing, a new technology in chemical recovery. Appita J 59(2):130–135
go back to reference Kojima, Y, Yoon, SL (1991) Distribution of lignin in the cell wall of ozonized CTMP fibres. In: Proceedings from the 1991 6th international symposium on wood and pulp chemistry, Melbourne, Australia, p 109 Kojima, Y, Yoon, SL (1991) Distribution of lignin in the cell wall of ozonized CTMP fibres. In: Proceedings from the 1991 6th international symposium on wood and pulp chemistry, Melbourne, Australia, p 109
go back to reference Kojima Y, Yoon SL, Kayama T (1988) A study of production of CTMP from hardwood. Part B : characterization of pulp produced by CTMP-O3 process, Japan Tappi J 42(10): 953–962 Kojima Y, Yoon SL, Kayama T (1988) A study of production of CTMP from hardwood. Part B : characterization of pulp produced by CTMP-O3 process, Japan Tappi J 42(10): 953–962
go back to reference Koskinen K (1999) Wood handling applications. In: Gullichsen J, Fogelholm C-J (eds) Papermaking science and technology, Book 6A. Chemical pulping. Fapet Oy, Helsinki, pp 331–491 Koskinen K (1999) Wood handling applications. In: Gullichsen J, Fogelholm C-J (eds) Papermaking science and technology, Book 6A. Chemical pulping. Fapet Oy, Helsinki, pp 331–491
go back to reference Ku PWC, Hsieh JS, Jayawant MD, Houle L (1992) Chlorination stage elimination by using nitrosation pretreatment before oxygen delignification/oxygen reinforced extraction. Tappi J 75(10):146–151 Ku PWC, Hsieh JS, Jayawant MD, Houle L (1992) Chlorination stage elimination by using nitrosation pretreatment before oxygen delignification/oxygen reinforced extraction. Tappi J 75(10):146–151
go back to reference Kubes GJ, Fleming BI, Macleod JM, Bolker HI, Werthemann DP (1983) Viscosities of unbleached alkaline pulps.2. The G-factor. J Wood Chem Technol 3(3):313–333 Kubes GJ, Fleming BI, Macleod JM, Bolker HI, Werthemann DP (1983) Viscosities of unbleached alkaline pulps.2. The G-factor. J Wood Chem Technol 3(3):313–333
go back to reference Kuligowski C, Brochier B, Petit-Conil M (2005) New ways to use ozone in bleaching sequences: ozonated water as a last bleaching stage. In: 2005 international pulp bleaching conference, Stockholm, Sweden, 14–16 June 2005, pp 284–287 Kuligowski C, Brochier B, Petit-Conil M (2005) New ways to use ozone in bleaching sequences: ozonated water as a last bleaching stage. In: 2005 international pulp bleaching conference, Stockholm, Sweden, 14–16 June 2005, pp 284–287
go back to reference Kymäläinen M (2001) Fate of nitrogen in the chemical recovery cycle of a kraft pulp mill. PhD thesis, Åbo Akademi University, Turku, Finland Kymäläinen M (2001) Fate of nitrogen in the chemical recovery cycle of a kraft pulp mill. PhD thesis, Åbo Akademi University, Turku, Finland
go back to reference Lachenal D, Papadopoulos J (1988) Improvement of hydrogen peroxide delignification. J Cellul Chem Technol 22(5):537 Lachenal D, Papadopoulos J (1988) Improvement of hydrogen peroxide delignification. J Cellul Chem Technol 22(5):537
go back to reference Lachenal D, Chirat C, Viardin MT (2000) High temperature chorine dioxide delignification. A breakthrough in ECF bleaching of hardwood kraft pulps. Tappi J 83(8):96 Lachenal D, Chirat C, Viardin MT (2000) High temperature chorine dioxide delignification. A breakthrough in ECF bleaching of hardwood kraft pulps. Tappi J 83(8):96
go back to reference Laine J, Stenius P, Carlsson G, Storm G (1996) The effect of ECF and TCF bleaching on the surface chemical composition of kraft pulp as determined by ESCA. Nord Pulp Pap Res J 11(3):201 Laine J, Stenius P, Carlsson G, Storm G (1996) The effect of ECF and TCF bleaching on the surface chemical composition of kraft pulp as determined by ESCA. Nord Pulp Pap Res J 11(3):201
go back to reference Lancaster L,Yin C, Renard J, Phillips RB (1992) The effects of alternative pulping and bleaching processes on product performance – economic and environmental concerns. In: Proceedings, EPA international symposium on pollution prevention in the manufacture of pulp and paper. Washington, USA Lancaster L,Yin C, Renard J, Phillips RB (1992) The effects of alternative pulping and bleaching processes on product performance – economic and environmental concerns. In: Proceedings, EPA international symposium on pollution prevention in the manufacture of pulp and paper. Washington, USA
go back to reference Larsen E, Kreutz T, Consonni S (1998) Performance and preliminary economics of black liquor gasification combined cycles for a range of kraft pulp mill sizes. In: International chemical recovery conference, vol 2, Tampa, FL, USA, 1–4 June 1998, pp 675–692 Larsen E, Kreutz T, Consonni S (1998) Performance and preliminary economics of black liquor gasification combined cycles for a range of kraft pulp mill sizes. In: International chemical recovery conference, vol 2, Tampa, FL, USA, 1–4 June 1998, pp 675–692
go back to reference Larsen E, Consonni S, Katofsky R (2003) A cost-benefit assessment of biomass gasification power generation in the pulp and paper industry. Final report. Princeton Environmental Institute, October 8, 2003. Princeton University Princeton, NJ, USA Larsen E, Consonni S, Katofsky R (2003) A cost-benefit assessment of biomass gasification power generation in the pulp and paper industry. Final report. Princeton Environmental Institute, October 8, 2003. Princeton University Princeton, NJ, USA
go back to reference Laubach GD (1998) 1997 TAPPI survey of pulping additives – AQ and chip penetrants, In: TAPPI proceedings: breaking the pulp yield barrier symposium. TAPPI Press, Atlanta, pp 103–111 Laubach GD (1998) 1997 TAPPI survey of pulping additives – AQ and chip penetrants, In: TAPPI proceedings: breaking the pulp yield barrier symposium. TAPPI Press, Atlanta, pp 103–111
go back to reference Lecourt M, Struga B, Delagoutte T, Petit-Conil M (2007) Saving energy by application of ozone in the thermomechanical pulping process. IMPC, Minneapolis, pp 494–507 Lecourt M, Struga B, Delagoutte T, Petit-Conil M (2007) Saving energy by application of ozone in the thermomechanical pulping process. IMPC, Minneapolis, pp 494–507
go back to reference Lee HL, Yuon HJ, Jung TM (2000) Improvement of linerboard properties by Condebelt drying. TAPPI 83(7) Lee HL, Yuon HJ, Jung TM (2000) Improvement of linerboard properties by Condebelt drying. TAPPI 83(7)
go back to reference Lefebvre BE, Santyr GM (1989) Effect of operating variables on kraft recovery boiler performance. Pulp Pap Can 90(12):145–152 Lefebvre BE, Santyr GM (1989) Effect of operating variables on kraft recovery boiler performance. Pulp Pap Can 90(12):145–152
go back to reference Leporini Filho C, Süss HU, Rodrigues da Silva M, Lopes Peixoto MA (2003) Addition of hydrogen peroxide to ozonation for improved bleaching results., ABTCP-TAPPI 2003, 36° Congresso Internacional de Celulose e Papel, São Paulo, Brazil Leporini Filho C, Süss HU, Rodrigues da Silva M, Lopes Peixoto MA (2003) Addition of hydrogen peroxide to ozonation for improved bleaching results., ABTCP-TAPPI 2003, 36° Congresso Internacional de Celulose e Papel, São Paulo, Brazil
go back to reference Levlin JE (1990) On the use of chemi-mechanical pulps in fine papers. Pap Ja Puu-Pap Timber 72(4):301–308 Levlin JE (1990) On the use of chemi-mechanical pulps in fine papers. Pap Ja Puu-Pap Timber 72(4):301–308
go back to reference Li J, Gellerstedt G (1997a) On the structural significance of kappa number measurement. In: Preprints 9th international symposium, wood pulping chemistry, vol 1, Montreal, QC, Canada, GI-I Li J, Gellerstedt G (1997a) On the structural significance of kappa number measurement. In: Preprints 9th international symposium, wood pulping chemistry, vol 1, Montreal, QC, Canada, GI-I
go back to reference Li J, Gellerstedt G (1997b) The contribution to kappa number from hexenuronic acid groups in pulp xylan. Carbohydr Res 302(3–4):213 Li J, Gellerstedt G (1997b) The contribution to kappa number from hexenuronic acid groups in pulp xylan. Carbohydr Res 302(3–4):213
go back to reference Li K, Lei X, Lu L, Camm C (2010) Surface characterization and surface modification of mechanical pulp fibers. Pulp Pap Can 111(1):28–33 Li K, Lei X, Lu L, Camm C (2010) Surface characterization and surface modification of mechanical pulp fibers. Pulp Pap Can 111(1):28–33
go back to reference Lin B (2008) The basics of foul condensate stripping. Krat recovery short course, Florida, USA Lin B (2008) The basics of foul condensate stripping. Krat recovery short course, Florida, USA
go back to reference Lindberg H, Engdahl, H, Puumalinen R (1994) Strategies for metal removal control in closed cycle mills. In: 1994 proceedings of the international pulp bleaching conference. CPPA, Montreal Lindberg H, Engdahl, H, Puumalinen R (1994) Strategies for metal removal control in closed cycle mills. In: 1994 proceedings of the international pulp bleaching conference. CPPA, Montreal
go back to reference Lindblom M (2006) Chemrec pressurized black liquor gasification – status and future plans. In: 7th international colloquium on black liquor combustion and gasification, Jyväskylä, Finland, 31 July – 2 August 2006 Lindblom M (2006) Chemrec pressurized black liquor gasification – status and future plans. In: 7th international colloquium on black liquor combustion and gasification, Jyväskylä, Finland, 31 July – 2 August 2006
go back to reference Lindgren CT, Lindström ME (1996) The kinetics of residual delignification and factors affecting the amount of residual lignin during kraft pulping. J Pulp Pap Sci 22(8):J290–J295 Lindgren CT, Lindström ME (1996) The kinetics of residual delignification and factors affecting the amount of residual lignin during kraft pulping. J Pulp Pap Sci 22(8):J290–J295
go back to reference Lindholm CA (1977a) Ozone treatment of mechanical pulp. Part 2: influence on strength properties, Pap Ja Puu 59(2):47–50, 53–58, 60, 62 Lindholm CA (1977a) Ozone treatment of mechanical pulp. Part 2: influence on strength properties, Pap Ja Puu 59(2):47–50, 53–58, 60, 62
go back to reference Lindholm CA (1977b) Ozone treatment of mechanical pulp. Part 3: influence on optical properties, Pap Ja Puu 59(4a):217–218, 221–224, 227–232 Lindholm CA (1977b) Ozone treatment of mechanical pulp. Part 3: influence on optical properties, Pap Ja Puu 59(4a):217–218, 221–224, 227–232
go back to reference Lindholm CA (1977c) Ozone treatment of mechanical pulps. Pap Ja Puu (Special No. 4a):217–231. Lindholm CA (1977c) Ozone treatment of mechanical pulps. Pap Ja Puu (Special No. 4a):217–231.
go back to reference Lindholm CA, Gummerus M (1983) Comparison of alkaline sulphite and ozone treatment of SGW, PGW and TMP fibre’s. Pap Ja Puu 65(8):467–473 Lindholm CA, Gummerus M (1983) Comparison of alkaline sulphite and ozone treatment of SGW, PGW and TMP fibre’s. Pap Ja Puu 65(8):467–473
go back to reference Lindstrom LA (2003) Impact on bleachability and pulp properties by environmentally friendly bleaching concepts. In: Metso paper pulping technology seminar, Hyderabad, India, November 2003 Lindstrom LA (2003) Impact on bleachability and pulp properties by environmentally friendly bleaching concepts. In: Metso paper pulping technology seminar, Hyderabad, India, November 2003
go back to reference Lindström LÅ, Larsson, PE (2003) Fiber lines for bleached eucalyptus kraft pulps. Impact on bleachability and paper properties. In: Conference in Vicosa, Brasil, 4–5 September 2003 Lindström LÅ, Larsson, PE (2003) Fiber lines for bleached eucalyptus kraft pulps. Impact on bleachability and paper properties. In: Conference in Vicosa, Brasil, 4–5 September 2003
go back to reference Lindström ME, Teder A (1995) The effect of polysulfide pretreatment when kraft pulping to very low kappa numbers. Nord Pulp Pap Res J 10(1):8 Lindström ME, Teder A (1995) The effect of polysulfide pretreatment when kraft pulping to very low kappa numbers. Nord Pulp Pap Res J 10(1):8
go back to reference Lindstrom LA, Norden S, Wennerstrom M (2007) High consistency ozone bleaching: present status and future. IPPTA 19(1):83–86 Lindstrom LA, Norden S, Wennerstrom M (2007) High consistency ozone bleaching: present status and future. IPPTA 19(1):83–86
go back to reference Lönnberg B (2009) Papermaking science and technology, Book 5, mechanical pulping, Chapter 7, Thermomechanical Pulping, pp 214–221, Paperi ja Puu Oy Lönnberg B (2009) Papermaking science and technology, Book 5, mechanical pulping, Chapter 7, Thermomechanical Pulping, pp 214–221, Paperi ja Puu Oy
go back to reference Löwendahl L, Samuelsson O (1978) Carbohydrate stabilization during soda pulping with addition of antraquinone. Tappi 61(17):566 Löwendahl L, Samuelsson O (1978) Carbohydrate stabilization during soda pulping with addition of antraquinone. Tappi 61(17):566
go back to reference Lyon RK (1979) Thermal DeNOx: How it works. In: Hydrocarbon processing, October. Gulf Publishing Co., Houston, Texas Lyon RK (1979) Thermal DeNOx: How it works. In: Hydrocarbon processing, October. Gulf Publishing Co., Houston, Texas
go back to reference Lyon RK (1987) Thermal DeNO: controlling nitrogen oxides emissions by a noncatalytic process, Environ Sci Technol 21(3):231 Lyon RK (1987) Thermal DeNO: controlling nitrogen oxides emissions by a noncatalytic process, Environ Sci Technol 21(3):231
go back to reference Magara K, Ikeda I, Tomimura Y, Hosoya S (1998) Accelerated degradation of cellulose in the presence of lignin during ozone bleaching. J Pulp Pap Sci 24(8):264 Magara K, Ikeda I, Tomimura Y, Hosoya S (1998) Accelerated degradation of cellulose in the presence of lignin during ozone bleaching. J Pulp Pap Sci 24(8):264
go back to reference Magnotta V, Kirkman A, Jameel H, Gratzl J (1998) High kappa pulping and extended oxygen delignification to increase yield, Breaking the pulp yield barrier symposium, Atlanta, February 17–18 1998, Tappi Press, Atlanta, pp 165–182 Magnotta V, Kirkman A, Jameel H, Gratzl J (1998) High kappa pulping and extended oxygen delignification to increase yield, Breaking the pulp yield barrier symposium, Atlanta, February 17–18 1998, Tappi Press, Atlanta, pp 165–182
go back to reference Mahmoudi S, Baeyens J, Seville JPK (2010) NOx formation and selective non-catalytic reduction (SNCR) in a fluidized bed combustor of biomass. Biomass Bioenergy 34:1393–1409 Mahmoudi S, Baeyens J, Seville JPK (2010) NOx formation and selective non-catalytic reduction (SNCR) in a fluidized bed combustor of biomass. Biomass Bioenergy 34:1393–1409
go back to reference Mäkinen T, Alakangas E, Kauppi M (2011) BioRefinery yearbook 2011. Tekes, Helsinki Mäkinen T, Alakangas E, Kauppi M (2011) BioRefinery yearbook 2011. Tekes, Helsinki
go back to reference Maleshenko A, Ilmoniemi E, Kaasalainen H (2008) Web-forming unit of a paper or board machine. WO 2006120294 (A1) Maleshenko A, Ilmoniemi E, Kaasalainen H (2008) Web-forming unit of a paper or board machine. WO 2006120294 (A1)
go back to reference Malinen R, Rantanen T, Rautonen R, Toikkanen L (1994) TCF bleaching to high brightness – bleaching sequences and pulp properties. In: Paper presented at 1994 international pulp bleaching conference held at Vancouver, Canada, 13–16 June 1994, Paper presentations, pp 187–194 Malinen R, Rantanen T, Rautonen R, Toikkanen L (1994) TCF bleaching to high brightness – bleaching sequences and pulp properties. In: Paper presented at 1994 international pulp bleaching conference held at Vancouver, Canada, 13–16 June 1994, Paper presentations, pp 187–194
go back to reference Malkov Y (1990) A polysulfide liquor regeneration process with the use of an MT catalyst. Pap Ja Puu 72(10):961–966 Malkov Y (1990) A polysulfide liquor regeneration process with the use of an MT catalyst. Pap Ja Puu 72(10):961–966
go back to reference Malmström J (2010) NOx emissions from Swedish recovery boilers. Swedish Forest Industries Federation, Sweden Malmström J (2010) NOx emissions from Swedish recovery boilers. Swedish Forest Industries Federation, Sweden
go back to reference Mansour MN, Steedman, WG, Durai-Swamy K, Kazares, RE, Raman TV (1992) Chemical and energy recovery from black liquor by steam reforming. In: International chemical recovery conference, Seattle, WA, USA, 7–11 June 1992 Mansour MN, Steedman, WG, Durai-Swamy K, Kazares, RE, Raman TV (1992) Chemical and energy recovery from black liquor by steam reforming. In: International chemical recovery conference, Seattle, WA, USA, 7–11 June 1992
go back to reference Mansour MN, Durai-Swamy K, Aghamohammadi B (1993). Pulsed combustion process for black liquor gasification. Second annual report U.S. DOE report DOE/CE/40893-T2 (DE94002668) Mansour MN, Durai-Swamy K, Aghamohammadi B (1993). Pulsed combustion process for black liquor gasification. Second annual report U.S. DOE report DOE/CE/40893-T2 (DE94002668)
go back to reference Mansour MN, Durai-Swamy K, Warren DW (1997) Endothermic spent liquor recovery process, U.S. Patent no 5,637, 192 Mansour MN, Durai-Swamy K, Warren DW (1997) Endothermic spent liquor recovery process, U.S. Patent no 5,637, 192
go back to reference Mao X, Kim J, Tran H, Kochesfahani SH (2006) Effect of chloride and potassium on borate autocausticizing reactions during black liquor combustion, Pulp Pap Can 107(10):T201–T204 Mao X, Kim J, Tran H, Kochesfahani SH (2006) Effect of chloride and potassium on borate autocausticizing reactions during black liquor combustion, Pulp Pap Can 107(10):T201–T204
go back to reference Maples GM, Ambady R, Caron JR, Stratton SC, Vega Canovas RE (1994) BFR™: a new process toward bleach plant closure. Tappi J 77(11) Maples GM, Ambady R, Caron JR, Stratton SC, Vega Canovas RE (1994) BFR™: a new process toward bleach plant closure. Tappi J 77(11)
go back to reference Marechal AJ (1993) Acid extraction of alkaline wood pulps before or during bleaching: reason and opportunity, Wood Chem Technol 13(2):261 Marechal AJ (1993) Acid extraction of alkaline wood pulps before or during bleaching: reason and opportunity, Wood Chem Technol 13(2):261
go back to reference Martin N, Anglani N, Einstein D, Khrushch M, Worrell E, Price L (2000a) Opportunities to improve energy efficiency and reduce greenhouse gas emissions in the U.S. Pulp and Paper Industry. Lawrence Berkeley National Laboratory, LBNL-46141, Berkeley Martin N, Anglani N, Einstein D, Khrushch M, Worrell E, Price L (2000a) Opportunities to improve energy efficiency and reduce greenhouse gas emissions in the U.S. Pulp and Paper Industry. Lawrence Berkeley National Laboratory, LBNL-46141, Berkeley
go back to reference Martin N, Worrell E, Ruth M, Price L, Elliott RN, Shipley AM, Thorne J (2000b) Emerging energy-efficient industrial technologies. Lawrence Berkeley National Laboratory, LBNL-46990, Berkeley Martin N, Worrell E, Ruth M, Price L, Elliott RN, Shipley AM, Thorne J (2000b) Emerging energy-efficient industrial technologies. Lawrence Berkeley National Laboratory, LBNL-46990, Berkeley
go back to reference Martius C (1992) Density, humidity, and nitrogen content of dominant wood species of floodplain forests (várzea) in Amazonia. Holz Roh Werkst 50:300–303 Martius C (1992) Density, humidity, and nitrogen content of dominant wood species of floodplain forests (várzea) in Amazonia. Holz Roh Werkst 50:300–303
go back to reference McCubbin N (2001a) Spill control: assessing your situation. Solutions 84(11):49–50 McCubbin N (2001a) Spill control: assessing your situation. Solutions 84(11):49–50
go back to reference McCubbin N (2001b) Spill control. Part II: Reducing spills. Solutions 84(12):36–37 McCubbin N (2001b) Spill control. Part II: Reducing spills. Solutions 84(12):36–37
go back to reference McDonough TJ (1990) Oxygen delignification. In: Tappi bleach plant operations short course, Hilton Head, Tappi press McDonough TJ (1990) Oxygen delignification. In: Tappi bleach plant operations short course, Hilton Head, Tappi press
go back to reference McDonough TJ (1995) Recent advances in bleached chemical pulp manufacturing technology. Tappi J 78:55–62 McDonough TJ (1995) Recent advances in bleached chemical pulp manufacturing technology. Tappi J 78:55–62
go back to reference McDonough TJ (1996) Oxygen delignification. In: Dence CW, Reeve DW (eds) Pulp bleaching – principles and practice. Tappi Press, Atlanta, p 213 McDonough TJ (1996) Oxygen delignification. In: Dence CW, Reeve DW (eds) Pulp bleaching – principles and practice. Tappi Press, Atlanta, p 213
go back to reference McDonough T, Herro J (1997) Influence of low-lignin pulping conditions on bleachability; effects of anthraquinone and effective alkali charge, anthraquinone pulping: TAPPI Press Anthology of Published Papers 1977–1996 (Goyal G. ed.) Chapter 1, pp 129–133 McDonough T, Herro J (1997) Influence of low-lignin pulping conditions on bleachability; effects of anthraquinone and effective alkali charge, anthraquinone pulping: TAPPI Press Anthology of Published Papers 1977–1996 (Goyal G. ed.) Chapter 1, pp 129–133
go back to reference McGowan D R (2002) White water reuse in high-pressure paper machine showers. Preprints 88th PAPTAC annual meeting, Montreal, QC, Canada, 29–31 January 2002 [Pulp and Paper Technical Association of Canada, Montreal, Canada: 2002), pp B125–B128 McGowan D R (2002) White water reuse in high-pressure paper machine showers. Preprints 88th PAPTAC annual meeting, Montreal, QC, Canada, 29–31 January 2002 [Pulp and Paper Technical Association of Canada, Montreal, Canada: 2002), pp B125–B128
go back to reference Mckeough P (2003) Evaluation of potential improvements to BLG technology. Colloquium of black liquor combustion and gasification. Utah, Park City, 12 p Mckeough P (2003) Evaluation of potential improvements to BLG technology. Colloquium of black liquor combustion and gasification. Utah, Park City, 12 p
go back to reference Mehra NK (1979) Recausticizing and lime mud reburning, Tappi 62(9):47–51 Mehra NK (1979) Recausticizing and lime mud reburning, Tappi 62(9):47–51
go back to reference Meller A (1963) Retention of polysaccharides in kraft pulping. Part 1. The effect of borohydride treatment of Pinus radiata wood on its alkali stability. Tappi 46(5):317–319 Meller A (1963) Retention of polysaccharides in kraft pulping. Part 1. The effect of borohydride treatment of Pinus radiata wood on its alkali stability. Tappi 46(5):317–319
go back to reference Meller A, Ritman BL (1964) Retention of polysaccharides in kraft pulping. Part II. The effect of borohydride addition to kraft liquor on pulp yield, chemical characteristics and papermaking properties of Pinus radiata pulps. Tappi 47(1):55–64 Meller A, Ritman BL (1964) Retention of polysaccharides in kraft pulping. Part II. The effect of borohydride addition to kraft liquor on pulp yield, chemical characteristics and papermaking properties of Pinus radiata pulps. Tappi 47(1):55–64
go back to reference Michniewicz M, Janiqa M (2010) The technique for sodium carbonate autocausticization with sodium metaborate. Polish Pap Rev 66(5):263–268 Michniewicz M, Janiqa M (2010) The technique for sodium carbonate autocausticization with sodium metaborate. Polish Pap Rev 66(5):263–268
go back to reference Middleton T (2006) Steam reforming technology at the norampac trenton mil. Presentation at IEA meeting, annex XV black liquor gasification, Washington, DC, USA, 20–22 February 2006. Middleton T (2006) Steam reforming technology at the norampac trenton mil. Presentation at IEA meeting, annex XV black liquor gasification, Washington, DC, USA, 20–22 February 2006.
go back to reference Moldenius S (1995) Pulp quality and economics of ECF vs. TCF. In: Presentation, international non-chlorine bleaching conference. Amelia Island, Florida Moldenius S (1995) Pulp quality and economics of ECF vs. TCF. In: Presentation, international non-chlorine bleaching conference. Amelia Island, Florida
go back to reference Moldenius S (1997) Mill experience with ECF and TCF bleaching facts vs. fiction. In: Proceedings of the international emerging technologies conference, Orlando, FL Moldenius S (1997) Mill experience with ECF and TCF bleaching facts vs. fiction. In: Proceedings of the international emerging technologies conference, Orlando, FL
go back to reference Mutton DB (1958) Hardwood resin. Tappi 41(11):632–643 Mutton DB (1958) Hardwood resin. Tappi 41(11):632–643
go back to reference Naqvi M, Yan J, Dahlquist E (2010) Black liquor gasification integrated in pulp and paper mills: a critical review. Bioresour Technol 101:8001–8015 Naqvi M, Yan J, Dahlquist E (2010) Black liquor gasification integrated in pulp and paper mills: a critical review. Bioresour Technol 101:8001–8015
go back to reference Naqvi M, Yan J, Dahlquist E (2012) Bio-refinery system in a pulp mill for methanol production with comparison of pressurized black liquor gasification and dry gasification using direct causticization. Appl Energy 90(1):24–31 Naqvi M, Yan J, Dahlquist E (2012) Bio-refinery system in a pulp mill for methanol production with comparison of pressurized black liquor gasification and dry gasification using direct causticization. Appl Energy 90(1):24–31
go back to reference National Council for Air and Stream Improvement (NCASI) (2012) Pulp and paper mill emissions of SO2, NOx, and particulate matter in 2010. Special report no. 12–03. National Council for Air and Stream Improvement Inc, Research Triangle Park National Council for Air and Stream Improvement (NCASI) (2012) Pulp and paper mill emissions of SO2, NOx, and particulate matter in 2010. Special report no. 12–03. National Council for Air and Stream Improvement Inc, Research Triangle Park
go back to reference Nelson PJ (1998) Elemental chlorine free (ECF) and totally chlorine free (TCF) bleaching of pulps. In: Young RA, Akhtar M (eds) Environmentally friendly technologies for the pulp and paper industry. Wiley, New York, p 215 Nelson PJ (1998) Elemental chlorine free (ECF) and totally chlorine free (TCF) bleaching of pulps. In: Young RA, Akhtar M (eds) Environmentally friendly technologies for the pulp and paper industry. Wiley, New York, p 215
go back to reference Nesaratnam S (1998) Effluent treatment. Pira environment guide series, Pira International, Leatherhead, p 72 Nesaratnam S (1998) Effluent treatment. Pira environment guide series, Pira International, Leatherhead, p 72
go back to reference Newport DG, Rockvam 1, Rowbotton R (2004) Black liquor steam reformer start-up at Norainpac. In: Proceedings of TAPPI international chemical recovery conference, South Carolina Newport DG, Rockvam 1, Rowbotton R (2004) Black liquor steam reformer start-up at Norainpac. In: Proceedings of TAPPI international chemical recovery conference, South Carolina
go back to reference Ni Y, Kubes GJ, van Heiningen ARP (1992) Rate processes of chlorine dioxide distribution during prebleaching of kraft pulp. Nord Pulp Pap Res J 7(4):200–204 Ni Y, Kubes GJ, van Heiningen ARP (1992) Rate processes of chlorine dioxide distribution during prebleaching of kraft pulp. Nord Pulp Pap Res J 7(4):200–204
go back to reference Nichols KM, Thompson, LM, Empie HJ (1993) A review of NOx formation mechanisms in recovery furnaces. Tappi J 76(1):119–124 Nichols KM, Thompson, LM, Empie HJ (1993) A review of NOx formation mechanisms in recovery furnaces. Tappi J 76(1):119–124
go back to reference Niiranen M (1985) Study of debarking drum process dimensioning. Doctoral thesis. Helsinki University of Technology Niiranen M (1985) Study of debarking drum process dimensioning. Doctoral thesis. Helsinki University of Technology
go back to reference Nilsson J (1998) A literature survey of impulse drying, 1994–1998. Technical report. LUTKDH/(TKKA-7004)/1-36/1998. Lund University Nilsson J (1998) A literature survey of impulse drying, 1994–1998. Technical report. LUTKDH/(TKKA-7004)/1-36/1998. Lund University
go back to reference Nilsson LJ, Larson ED, Gilbreath KR, Gupta A (1995) Energy efficiency and the pulp and paper industry. ACEEE, Washington, DC/Berkeley Nilsson LJ, Larson ED, Gilbreath KR, Gupta A (1995) Energy efficiency and the pulp and paper industry. ACEEE, Washington, DC/Berkeley
go back to reference Nilsson P, Puurunen K, Vasara P,Jouttijarvi T (2007) Continuum – rethinking BAT emissions of the pulp and paper industry in the European Union, Finnish environment report 12/2007. 41 pp Nilsson P, Puurunen K, Vasara P,Jouttijarvi T (2007) Continuum – rethinking BAT emissions of the pulp and paper industry in the European Union, Finnish environment report 12/2007. 41 pp
go back to reference Nordén S, Teder A (1979) Modified kraft processes for softwood bleached-grade pulp. Tappi 62(7):49–51 Nordén S, Teder A (1979) Modified kraft processes for softwood bleached-grade pulp. Tappi 62(7):49–51
go back to reference Nordic Council of Ministers (1993) Study on nordic pulp and paper industry and the environment. Nordic Council of Ministers, Copenhagen Nordic Council of Ministers (1993) Study on nordic pulp and paper industry and the environment. Nordic Council of Ministers, Copenhagen
go back to reference Northeast States for Coordinated Air Use Management (NESCAUM) (2005) Assessment of control options for BART-eligible sources. Steam electric boilers, industrial boilers, cement plants and paper and pulp facilities. Northeast States for Coordinated Air Use Management In Partnership with The Mid-Atlantic/Northeast Visibility Union. www.nescaum.org/documents/bart-controlassessment.pdf/ Northeast States for Coordinated Air Use Management (NESCAUM) (2005) Assessment of control options for BART-eligible sources. Steam electric boilers, industrial boilers, cement plants and paper and pulp facilities. Northeast States for Coordinated Air Use Management In Partnership with The Mid-Atlantic/Northeast Visibility Union. www.​nescaum.​org/​documents/​bart-controlassessmen​t.​pdf/​
go back to reference Norvall G, Burton T, Kanters C (2001) The removal of pulp mill odors by novel catalytic environmental technology. Pulp Pap Can 102(4):T111–T113 Norvall G, Burton T, Kanters C (2001) The removal of pulp mill odors by novel catalytic environmental technology. Pulp Pap Can 102(4):T111–T113
go back to reference Nurmesniemi H (2010) Tertiary treatment of biologically treated waste water from the pulp and paper mill – internal report assessing findings of the WWF report on the Celco pulp mill in Valdivia, Chile, Sora Enso Oyj, Environmental affairs, 2010, p 2 Nurmesniemi H (2010) Tertiary treatment of biologically treated waste water from the pulp and paper mill – internal report assessing findings of the WWF report on the Celco pulp mill in Valdivia, Chile, Sora Enso Oyj, Environmental affairs, 2010, p 2
go back to reference Nutt WE, Griggs BF, Eachus SW, Pikulin MA (1993) Developing an ozone bleaching process. Tappi J 76(3):115–213 Nutt WE, Griggs BF, Eachus SW, Pikulin MA (1993) Developing an ozone bleaching process. Tappi J 76(3):115–213
go back to reference Obst JR, Landucci LL, Sanyer N (1979) Quinons in alkaline pulping. Tappi 62:1, 55 Obst JR, Landucci LL, Sanyer N (1979) Quinons in alkaline pulping. Tappi 62:1, 55
go back to reference Oinonen H (2010) Ozone bleached pulp and fine papers. Results Pulp Pap (2):35–38 Oinonen H (2010) Ozone bleached pulp and fine papers. Results Pulp Pap (2):35–38
go back to reference Ojala T (1999) Condebelt drying process benefiting paper- and boardmanufacturing and converting. In: Presentation at Aticelca/ATI Convention in Milan, April 19, 1999, Energetic evolution in the paper sector Ojala T (1999) Condebelt drying process benefiting paper- and boardmanufacturing and converting. In: Presentation at Aticelca/ATI Convention in Milan, April 19, 1999, Energetic evolution in the paper sector
go back to reference Pan GX (2001) An insight into the behaviour of aspen CTMP in peroxide bleaching – alkalinity’s influence is greater than that of peroxide charge. Pulp Pap Can 102(11):41–45 Pan GX (2001) An insight into the behaviour of aspen CTMP in peroxide bleaching – alkalinity’s influence is greater than that of peroxide charge. Pulp Pap Can 102(11):41–45
go back to reference Panchapakeshan B, Hickman E (1997) Fiberline advancements spur papermaking process changes. In: Patrick KL (ed) Advances in bleaching technology. Miller Freeman Books, San Francisco, p 82 Panchapakeshan B, Hickman E (1997) Fiberline advancements spur papermaking process changes. In: Patrick KL (ed) Advances in bleaching technology. Miller Freeman Books, San Francisco, p 82
go back to reference PARCOM (1994) BAT and BEP for the Sulphite and Kraft Pulp Industry, PARCOM, ISBN 0946 56 367 PARCOM (1994) BAT and BEP for the Sulphite and Kraft Pulp Industry, PARCOM, ISBN 0946 56 367
go back to reference Parker ET, Lundsted LG (1975) U.S.A. Patent 3,909,345 Parker ET, Lundsted LG (1975) U.S.A. Patent 3,909,345
go back to reference Parthasarathy VR (1997) Oxidative extraction of hardwood and softwood kraft pulps with sodium carbonate-sodium hydroxide mixtures or oxidized white liquor during multistage bleaching. Tappi J 80(10):253–261 Parthasarathy VR (1997) Oxidative extraction of hardwood and softwood kraft pulps with sodium carbonate-sodium hydroxide mixtures or oxidized white liquor during multistage bleaching. Tappi J 80(10):253–261
go back to reference Parthasarathy VR, Rudie GF, Detty AE (1993) Total chlorine dioxide substitution in short sequence bleaching and it’s effect on pulp brightness and effluent characteristics. In: Tappi pulping conference proceedings. Tappi Press, Atlanta, p 933 Parthasarathy VR, Rudie GF, Detty AE (1993) Total chlorine dioxide substitution in short sequence bleaching and it’s effect on pulp brightness and effluent characteristics. In: Tappi pulping conference proceedings. Tappi Press, Atlanta, p 933
go back to reference Pekkala O (1982) On the extended delignification using polysulfide or anthraquinone in kraft pulping. Pap Ja Puu 64(11):735–744 Pekkala O (1982) On the extended delignification using polysulfide or anthraquinone in kraft pulping. Pap Ja Puu 64(11):735–744
go back to reference Pekkala O (1986) Prolonged kraft cooking modified by anthraquinone and polysulfide. Pap Ja Puu 68(5):385–400 Pekkala O (1986) Prolonged kraft cooking modified by anthraquinone and polysulfide. Pap Ja Puu 68(5):385–400
go back to reference Pereira ER, Colodette JL, Barna J (1995) Peroxide bleaching in pressurised equipment: influence of temperature and consistency. Papel 56(12):61–67 Pereira ER, Colodette JL, Barna J (1995) Peroxide bleaching in pressurised equipment: influence of temperature and consistency. Papel 56(12):61–67
go back to reference Persson H (1994) A literature review of impulse drying, 1988–1994. Technical report LUTKDH/(TKKA-7005)/1-42/1994. Lund University Persson H (1994) A literature review of impulse drying, 1988–1994. Technical report LUTKDH/(TKKA-7005)/1-42/1994. Lund University
go back to reference Peter W (1993) First experience with mill-scale ozone bleaching, non-chlorine bleaching conference, Miller Freeman, San Francisco, CA, USA, 1993, Paper 22 Peter W (1993) First experience with mill-scale ozone bleaching, non-chlorine bleaching conference, Miller Freeman, San Francisco, CA, USA, 1993, Paper 22
go back to reference Petit-Conil, M (1995) Principes de préparation des pâtes CTMP de bois résineux et feuillus. Application à la mise au point de procédés, Thèse de l’Institut National Polytechnique de Grenoble Petit-Conil, M (1995) Principes de préparation des pâtes CTMP de bois résineux et feuillus. Application à la mise au point de procédés, Thèse de l’Institut National Polytechnique de Grenoble
go back to reference Petit-Conil M (2003) Use of ozone in mechanical pulping processes. ATIP 57(2):17–26 Petit-Conil M (2003) Use of ozone in mechanical pulping processes. ATIP 57(2):17–26
go back to reference Petit-Conil M, de Choudens C (1994) A new chemithermomechanical process : use of oxygen in the primary refining stage. Part 1: oxidative sulfonation for hardwood and softwood CTMP pulping. Das Pap 48(10):628–634 Petit-Conil M, de Choudens C (1994) A new chemithermomechanical process : use of oxygen in the primary refining stage. Part 1: oxidative sulfonation for hardwood and softwood CTMP pulping. Das Pap 48(10):628–634
go back to reference Petit-Conil M, Robert A, Pierrard JM (1997) Fundamental principles of mechanical pulping from softwoods and hardwoods. Part 1: theoretical aspects. Cellul Chem Technol 31(1/2):93–104 Petit-Conil M, Robert A, Pierrard JM (1997) Fundamental principles of mechanical pulping from softwoods and hardwoods. Part 1: theoretical aspects. Cellul Chem Technol 31(1/2):93–104
go back to reference Petit-Conil M, de Choudens C, Espilit T (1998) Ozone in the production of softwood and hardwood high-yield pulps to save energy and improve quality. Nord Pulp Pap Res J 13(1):16–22 Petit-Conil M, de Choudens C, Espilit T (1998) Ozone in the production of softwood and hardwood high-yield pulps to save energy and improve quality. Nord Pulp Pap Res J 13(1):16–22
go back to reference Pettersson SE, Rydholm SA (1961) Hemicelluloses and paper properties of birch pulps, Part 3. Sven Pap 64(1):4–17 Pettersson SE, Rydholm SA (1961) Hemicelluloses and paper properties of birch pulps, Part 3. Sven Pap 64(1):4–17
go back to reference Pikka O, Vessala R, Vilpponen A, Dahllof H, Germgard U, Norden S, Bokstrom M, Steffes F, Gullichsen J (2000) Bleaching applications. In: Gullichsen J, Fogelholm C-J (eds) Chemical pulping –papermaking science and technology. Fapet Oy, Helsinki, Finland, Book 6A, p A19 Pikka O, Vessala R, Vilpponen A, Dahllof H, Germgard U, Norden S, Bokstrom M, Steffes F, Gullichsen J (2000) Bleaching applications. In: Gullichsen J, Fogelholm C-J (eds) Chemical pulping –papermaking science and technology. Fapet Oy, Helsinki, Finland, Book 6A, p A19
go back to reference Pipon G, Chirat C, Lachenal D (2005) Final bleaching with ozone – basic and applied aspects. IPBC, Stockholm, pp 138–143 Pipon G, Chirat C, Lachenal D (2005) Final bleaching with ozone – basic and applied aspects. IPBC, Stockholm, pp 138–143
go back to reference Pöyry J (1992) Reduction of atmospheric emissions from pulp industry, on behalf of Swedish EPA Pöyry J (1992) Reduction of atmospheric emissions from pulp industry, on behalf of Swedish EPA
go back to reference Pöyry J (1997) A compilation of BAT techniques in Pulp and Paper Industry. Jaakko Pöyry Oyj, 1997, Finland Pöyry J (1997) A compilation of BAT techniques in Pulp and Paper Industry. Jaakko Pöyry Oyj, 1997, Finland
go back to reference Prakash CB, Murray FE (1973). Studies on H2S emission during calcining, Pulp Pap Mag Can 74(5):99–102 Prakash CB, Murray FE (1973). Studies on H2S emission during calcining, Pulp Pap Mag Can 74(5):99–102
go back to reference Pryke DC (2003) ECF is on a roll: it dominates world bleached pulp production. Pulp Pap Int 45(8):27–29 Pryke DC (2003) ECF is on a roll: it dominates world bleached pulp production. Pulp Pap Int 45(8):27–29
go back to reference Pryke DC, Farley B, Wolf A (1995) Implementation of ECF bleaching at Mead Paper Co., Chillicothe, Ohio. In: Tappi pulping conference proceedings. TAPPI PRESS, Atlanta Pryke DC, Farley B, Wolf A (1995) Implementation of ECF bleaching at Mead Paper Co., Chillicothe, Ohio. In: Tappi pulping conference proceedings. TAPPI PRESS, Atlanta
go back to reference Quinde A (1994) Pulping additives in kraft pulping: past, present and future. In: 1994 Spring conference, Canadian Pulp and Paper Association. Jasper, Alberta. May 19–2 Quinde A (1994) Pulping additives in kraft pulping: past, present and future. In: 1994 Spring conference, Canadian Pulp and Paper Association. Jasper, Alberta. May 19–2
go back to reference Quinde A, Brogdon, B, Fowler L, Lee C (2004) A decade of AQ benefits at Canfor’s Northwood Mill (1994–2004). In: 2004 TAPPI Fall technical conference. Atlanta, GA, USA, October 31–November 3, 2004 Quinde A, Brogdon, B, Fowler L, Lee C (2004) A decade of AQ benefits at Canfor’s Northwood Mill (1994–2004). In: 2004 TAPPI Fall technical conference. Atlanta, GA, USA, October 31–November 3, 2004
go back to reference Radojevic M (1998) Reduction of nitrogen oxides in flue gases. Environ Pollut 102:685–689 Radojevic M (1998) Reduction of nitrogen oxides in flue gases. Environ Pollut 102:685–689
go back to reference Ragauskas AJ, Poll KM, Cesternino AJ (1993) Effect of xylanase pretreatment procedures for nonchlorine bleaching. IPST technical paper series, no. 482, Institute of Paper Science, Atlanta, 1993 Ragauskas AJ, Poll KM, Cesternino AJ (1993) Effect of xylanase pretreatment procedures for nonchlorine bleaching. IPST technical paper series, no. 482, Institute of Paper Science, Atlanta, 1993
go back to reference Ragnar M (2002) Modification of the D0 stage into D* makes 2-stage bleach plant for HW kraft pulp a reality. TAPPI international pulp bleaching conference. Portland, OR. Tappi Press, Atlanta Ragnar M (2002) Modification of the D0 stage into D* makes 2-stage bleach plant for HW kraft pulp a reality. TAPPI international pulp bleaching conference. Portland, OR. Tappi Press, Atlanta
go back to reference Ragnar M, Dahllöf H (2002) Kvaerner pulping, ECF bleaching of eucalypt kraft pulp bleaching chemical needs and yellowing characteristics of different sequences. Nord Pulp Pap Res J 17:3, 228–233 Ragnar M, Dahllöf H (2002) Kvaerner pulping, ECF bleaching of eucalypt kraft pulp bleaching chemical needs and yellowing characteristics of different sequences. Nord Pulp Pap Res J 17:3, 228–233
go back to reference Rajotte A (2000) Technology and environmental policy: case study on chlorine policies in the P&P sector in Finland, France, and Sweden, School of Business and Economics, University of Jyväskylä, Finland. In: 4th framework programme of DG XII of the European Commission, Contract ENV4-CT97-0604, 2000. Rajotte A (2000) Technology and environmental policy: case study on chlorine policies in the P&P sector in Finland, France, and Sweden, School of Business and Economics, University of Jyväskylä, Finland. In: 4th framework programme of DG XII of the European Commission, Contract ENV4-CT97-0604, 2000.
go back to reference Rampotas C, Terelius H, Jansson K (1996) The netfloc system – the tool to remove extractives and NPE. In: Proceedings of the 1996 minimum effluent mills symposium, Atlanta Rampotas C, Terelius H, Jansson K (1996) The netfloc system – the tool to remove extractives and NPE. In: Proceedings of the 1996 minimum effluent mills symposium, Atlanta
go back to reference Rapson WH, Anderson CB (1978) Kraft pulp bleaching with chlorine and chlorine dioxide. Tappi J 61(10):97 Rapson WH, Anderson CB (1978) Kraft pulp bleaching with chlorine and chlorine dioxide. Tappi J 61(10):97
go back to reference Ratnieks E, Ventura JW, Mensch MR, Zanchin RA (2001) Acid stage improves production in eucalyptus fibreline. P&P Can 102:12 Ratnieks E, Ventura JW, Mensch MR, Zanchin RA (2001) Acid stage improves production in eucalyptus fibreline. P&P Can 102:12
go back to reference Reeve DW (1996) In: Dence CW, Reeve DW (eds) Pulp bleaching – principles and practice. Tappi Press, Atlanta, pp 263–287 Reeve DW (1996) In: Dence CW, Reeve DW (eds) Pulp bleaching – principles and practice. Tappi Press, Atlanta, pp 263–287
go back to reference REHVA (2005) Electrostatic precipitators for industrial applications. REHVA guidebook, REHVA – Federation of European Heating and Air-conditioning Assosiations. REHVA, Brussels, p 117 REHVA (2005) Electrostatic precipitators for industrial applications. REHVA guidebook, REHVA – Federation of European Heating and Air-conditioning Assosiations. REHVA, Brussels, p 117
go back to reference Reis R (2001) The increased use of hardwood high yield pulps for functional advantages in papermaking. In: Proceedings of the 2001 papermakers conference, Cincinnati, OH, USA, pp 87–108 Reis R (2001) The increased use of hardwood high yield pulps for functional advantages in papermaking. In: Proceedings of the 2001 papermakers conference, Cincinnati, OH, USA, pp 87–108
go back to reference Rentz O, Schleef, HJ, Dorn R, Sasse H, Karl U (1996) Emission control at stationary sources in the Federal Republic of Germany, Volume I, Sulphur oxide and Nitrogen oxide emission control, French-German Institute for Environmental Research University of Karlsruhe (TH), Karlsruhe, August 1996 Rentz O, Schleef, HJ, Dorn R, Sasse H, Karl U (1996) Emission control at stationary sources in the Federal Republic of Germany, Volume I, Sulphur oxide and Nitrogen oxide emission control, French-German Institute for Environmental Research University of Karlsruhe (TH), Karlsruhe, August 1996
go back to reference Retulainen E (2001) Key development phases of condebelt: long journey from idea to commercial product. Dry Technol 19(10):2451–2467 Retulainen E (2001) Key development phases of condebelt: long journey from idea to commercial product. Dry Technol 19(10):2451–2467
go back to reference Retulainen E, Hamalainen A (2000) Three years of condebelt drying at stora enso’s pankakoski mill. TAPPI 83(5):1–8 Retulainen E, Hamalainen A (2000) Three years of condebelt drying at stora enso’s pankakoski mill. TAPPI 83(5):1–8
go back to reference Retulainen E, Merisalo N, Lehtinen J, Paulapuro H (1998) Effect of condebelt press drying in sheet structure and properties. Pulp Pap Can 99(1):53–58 Retulainen E, Merisalo N, Lehtinen J, Paulapuro H (1998) Effect of condebelt press drying in sheet structure and properties. Pulp Pap Can 99(1):53–58
go back to reference Rice RC, Netzer A (1982) Handbook of ozone technology and applications. Ann Arbor Science, Ann Arbor Rice RC, Netzer A (1982) Handbook of ozone technology and applications. Ann Arbor Science, Ann Arbor
go back to reference Robert DR, Szadeczki M, Lachenal D (1999) Chemical characteristics of lignins extracted from softwood TMP after O3 and ClO2 treatment. In: Proceedings from the 215th national ACS meeting, Lignin: historical, biological and materials perspectives, Dallas, Texas, USA, chapter 27, pp 520–531 Robert DR, Szadeczki M, Lachenal D (1999) Chemical characteristics of lignins extracted from softwood TMP after O3 and ClO2 treatment. In: Proceedings from the 215th national ACS meeting, Lignin: historical, biological and materials perspectives, Dallas, Texas, USA, chapter 27, pp 520–531
go back to reference Rockvam LN (2001) Black liquor steam reforming and recovery commercialization. In: International chemical recovery conference, Whistler, Canada, 11–14 June 2001 Rockvam LN (2001) Black liquor steam reforming and recovery commercialization. In: International chemical recovery conference, Whistler, Canada, 11–14 June 2001
go back to reference Rodrigues da Silva M, Peixoto MAL, Colodette JL (2002) Mill experience using a hot acid stage for eucalyptus kraft pulp bleaching. In: TAPPI international pulp bleaching conference. Portland, OR. Tappi Press, Atlanta Rodrigues da Silva M, Peixoto MAL, Colodette JL (2002) Mill experience using a hot acid stage for eucalyptus kraft pulp bleaching. In: TAPPI international pulp bleaching conference. Portland, OR. Tappi Press, Atlanta
go back to reference Rothenberg S, Shaw J, Durst WB (1981) Effect of chemical modification on the properties of lignin-containing fibres. Pap Ja Puu 63(3):111–114, 117–119 Rothenberg S, Shaw J, Durst WB (1981) Effect of chemical modification on the properties of lignin-containing fibres. Pap Ja Puu 63(3):111–114, 117–119
go back to reference Roy-Arcand L, Archibald F (1996) Selective removal of resin and fatty acids from mechanical pulp effluents by ozone. Water Res 30(5):1269–1279 Roy-Arcand L, Archibald F (1996) Selective removal of resin and fatty acids from mechanical pulp effluents by ozone. Water Res 30(5):1269–1279
go back to reference RPDC (2004) Development of new environmental emission limit guidelines for any new bleached eucalypt Kraft pulp mill in Tasmania- volume 1. Resource Planning and Development Commission, Tasmania RPDC (2004) Development of new environmental emission limit guidelines for any new bleached eucalypt Kraft pulp mill in Tasmania- volume 1. Resource Planning and Development Commission, Tasmania
go back to reference Ruffini G (1966) Improvement of bonding in wood pulps by the presence of acidic groups, Svensk Papperstding 69(3):72 Ruffini G (1966) Improvement of bonding in wood pulps by the presence of acidic groups, Svensk Papperstding 69(3):72
go back to reference Ryham R, Nikkanen S (1992) Liquor heat treatment and its impact on chemical recovery. In: Proceedings of the 1992 European pulp & paper week, Bologna, Italy, May 1992 Ryham R, Nikkanen S (1992) Liquor heat treatment and its impact on chemical recovery. In: Proceedings of the 1992 European pulp & paper week, Bologna, Italy, May 1992
go back to reference Sabourin M (2007) Minimizing TMP energy consumption using a combination of chip pre-treatment, RTS and multiple stage low consistency refining. In: 25th international mechanical pulping conference, Minneapolis, MN, USA, May 6–9, Tappi, Atlanta, GA, USA, 8 pp Sabourin M (2007) Minimizing TMP energy consumption using a combination of chip pre-treatment, RTS and multiple stage low consistency refining. In: 25th international mechanical pulping conference, Minneapolis, MN, USA, May 6–9, Tappi, Atlanta, GA, USA, 8 pp
go back to reference Sabourin MJ, Hart PW (2010) Enhanced fiber quality of black spruce (Picea mariana) thermomechanical pulp fiber through selective enzyme application. Ind Eng Chem Res 49:5945–5951 Sabourin MJ, Hart PW (2010) Enhanced fiber quality of black spruce (Picea mariana) thermomechanical pulp fiber through selective enzyme application. Ind Eng Chem Res 49:5945–5951
go back to reference Sabourin M, Aichinger J, Wiseman N (2003) Effect of increasing wood chip defibration on thermomechanical and chemi-thermomechanical refining efficiency, In: International mechanical pulping conference, Quebec City, pp 163–170 Sabourin M, Aichinger J, Wiseman N (2003) Effect of increasing wood chip defibration on thermomechanical and chemi-thermomechanical refining efficiency, In: International mechanical pulping conference, Quebec City, pp 163–170
go back to reference Saharinen E, Nurminen I (2001) Improving internal bonding strength and bulk for folding boxboard middle layer by ozone treatment. In: Proceedings from the 2001 international mechanical pulping conference, Helsinki, Finland, pp 119–124 Saharinen E, Nurminen I (2001) Improving internal bonding strength and bulk for folding boxboard middle layer by ozone treatment. In: Proceedings from the 2001 international mechanical pulping conference, Helsinki, Finland, pp 119–124
go back to reference Salo M (1999) Environmental best practices in the forest cluster, Interim Report IR-00-015, International Institute for Applied Systems Analysis, Vienna, Austria Salo M (1999) Environmental best practices in the forest cluster, Interim Report IR-00-015, International Institute for Applied Systems Analysis, Vienna, Austria
go back to reference Santos RE, Backlund JC (1992) Firing of non-condensible waste gas streams in stand alone modular incineration systems. In: Presented at the 1992 incineration conference, Albuquerque, New Mexico, Session XXI Santos RE, Backlund JC (1992) Firing of non-condensible waste gas streams in stand alone modular incineration systems. In: Presented at the 1992 incineration conference, Albuquerque, New Mexico, Session XXI
go back to reference Scheriau R (1972) Theorie der trommelentrindung unter besonderen berücksichtigung der trockenentrindung . Dissertation an der Technischen Hochschule Graz Scheriau R (1972) Theorie der trommelentrindung unter besonderen berücksichtigung der trockenentrindung . Dissertation an der Technischen Hochschule Graz
go back to reference Schroderus S, Carter D, Brumme H (2000) Upgrade of lime kiln and causticizing plant in kraft mill. Pulp Pap Can 101(1):74–78 Schroderus S, Carter D, Brumme H (2000) Upgrade of lime kiln and causticizing plant in kraft mill. Pulp Pap Can 101(1):74–78
go back to reference Sebbas E (1988) Reuse of Kraft Mill secondary condensates. Tappi J 71(7):53–58 Sebbas E (1988) Reuse of Kraft Mill secondary condensates. Tappi J 71(7):53–58
go back to reference SEPA-Report 4712-4 (1997a) Energy conservation in the pulp and paper industry. Jaakko Pöyry Consulting AB, Scotland, 1997 SEPA-Report 4712-4 (1997a) Energy conservation in the pulp and paper industry. Jaakko Pöyry Consulting AB, Scotland, 1997
go back to reference SEPA-Report 4713-2 (1997b) Aspects on energy and environment costs in connection with production of kraft pulp, Recycled fibre and TMP. Jaakko Pöyry Consulting AB, Scotland, 1997 SEPA-Report 4713-2 (1997b) Aspects on energy and environment costs in connection with production of kraft pulp, Recycled fibre and TMP. Jaakko Pöyry Consulting AB, Scotland, 1997
go back to reference Sezgi US, Kirkman AG, Jameel H, Chang H, Morrison JJ, Bianchini CA, Wilson JRA (1994) Combined discrete-continuous simulation model of an RDH tank farm. Tappi J 77(7):213–220 Sezgi US, Kirkman AG, Jameel H, Chang H, Morrison JJ, Bianchini CA, Wilson JRA (1994) Combined discrete-continuous simulation model of an RDH tank farm. Tappi J 77(7):213–220
go back to reference Sharma KD (2010) ITC’s experience with light ECF bleaching (ozone). IPPTA 22(1):131–133 Sharma KD (2010) ITC’s experience with light ECF bleaching (ozone). IPPTA 22(1):131–133
go back to reference Sheats A (2010) Ozone bleaching: environmental, production, and cost benefits. Pap Asia 26(3):24–26, 28 Sheats A (2010) Ozone bleaching: environmental, production, and cost benefits. Pap Asia 26(3):24–26, 28
go back to reference Shrinath SA, Bowen I.J (1993) An overview of AOX regulations and reduction strategies, In: Tappi pulping conference proceedings, Atlanta 14–18.11.1993, pp 1–15 Shrinath SA, Bowen I.J (1993) An overview of AOX regulations and reduction strategies, In: Tappi pulping conference proceedings, Atlanta 14–18.11.1993, pp 1–15
go back to reference Siltala M, Winberg K (1999) The use of bleach plant filtrate for post-oxygen washing: a way to save money and the environment. In: Proceedings of the 27th EUCEPA conference – crossing the millennium frontier, emerging technical and scientific challenges, Grenoble, France, pp 11–14 Siltala M, Winberg K (1999) The use of bleach plant filtrate for post-oxygen washing: a way to save money and the environment. In: Proceedings of the 27th EUCEPA conference – crossing the millennium frontier, emerging technical and scientific challenges, Grenoble, France, pp 11–14
go back to reference Simons HA, AF-IPK (1992) Multi-client study. In: Towards kraft mill 2000, Vancouver, Canada, Book 2, p 54 Simons HA, AF-IPK (1992) Multi-client study. In: Towards kraft mill 2000, Vancouver, Canada, Book 2, p 54
go back to reference Sjöblom K, Mjöberg J, Hartler N (1983) Extended delignification in kraft cooking through improved selectivity .1. The effects of the inorganic composition of the cooking liquor. Pap Puu 65(4):227–240 Sjöblom K, Mjöberg J, Hartler N (1983) Extended delignification in kraft cooking through improved selectivity .1. The effects of the inorganic composition of the cooking liquor. Pap Puu 65(4):227–240
go back to reference Sjödahl RG, Axelsson P, Lindström ME (2006) Addition of dissolved wood components to improve the delignification rate and pulp yield in hardwood kraft pulping. Appita J 59(4):317–320 Sjödahl RG, Axelsson P, Lindström ME (2006) Addition of dissolved wood components to improve the delignification rate and pulp yield in hardwood kraft pulping. Appita J 59(4):317–320
go back to reference Smook GA (1992) Handbook for pulp & paper technologists, 2nd edn. Angus Wilde Publications, Vancouver, p 36 Smook GA (1992) Handbook for pulp & paper technologists, 2nd edn. Angus Wilde Publications, Vancouver, p 36
go back to reference Soteland N (1977) The effect of ozone on mechanical pulps, Pulp Pap Can 78(7):45–48 Soteland N (1977) The effect of ozone on mechanical pulps, Pulp Pap Can 78(7):45–48
go back to reference Soteland N (1982) Interstage ozone treatment of hardwood high yield pulp. Pap Ja Puu 64(11):707–708, 710, 712–714 Soteland N (1982) Interstage ozone treatment of hardwood high yield pulp. Pap Ja Puu 64(11):707–708, 710, 712–714
go back to reference Soteland N, Loras V (1974) The effect of ozone on mechanical pulps. Norsk Skogind 28(6):165–169 Soteland N, Loras V (1974) The effect of ozone on mechanical pulps. Norsk Skogind 28(6):165–169
go back to reference Springer EL (1997) Delignification of wood and kraft pulp with peroxomonophosphoric acid. J Pulp Pap Sci 23(12):582 Springer EL (1997) Delignification of wood and kraft pulp with peroxomonophosphoric acid. J Pulp Pap Sci 23(12):582
go back to reference Sricharoenchaikul V (2001) Fate of carbon-containing compounds from gasification of kraft black liquor with subsequent catalytic conditioning of condensable organics. Ph.D dissertation, Georgia Institute of Technology, 2001 Sricharoenchaikul V (2001) Fate of carbon-containing compounds from gasification of kraft black liquor with subsequent catalytic conditioning of condensable organics. Ph.D dissertation, Georgia Institute of Technology, 2001
go back to reference Steen B, Stijnen T (1984) Hydrogen sulfide formation in a lime kiln at a kraft mill, Svensk Papperstidning 87(3):R14–R17 Steen B, Stijnen T (1984) Hydrogen sulfide formation in a lime kiln at a kraft mill, Svensk Papperstidning 87(3):R14–R17
go back to reference Steffes F, Germgard U (1995) ECF, TCF upgrade choices key on world market, environmental forces. Pulp Pap 69(6):83–92 Steffes F, Germgard U (1995) ECF, TCF upgrade choices key on world market, environmental forces. Pulp Pap 69(6):83–92
go back to reference Stenström S (1989) Impulstorkning av papper. STU projekt 742-88-02837. Lunds Tekniska Högskolan, (in Swedish) Stenström S (1989) Impulstorkning av papper. STU projekt 742-88-02837. Lunds Tekniska Högskolan, (in Swedish)
go back to reference Stigsson L (1998) Chemrec black liquor gasification. In: International chemical recovery conference, Tampa, Florida, USA, 1–4 June 1998 Stigsson L (1998) Chemrec black liquor gasification. In: International chemical recovery conference, Tampa, Florida, USA, 1–4 June 1998
go back to reference Stitt, EH, Fakley ME (1995) New process for the abatement of odors and low level VOCs. preprints. AIChE Spring meeting, Houston, TX, March, 1995 Stitt, EH, Fakley ME (1995) New process for the abatement of odors and low level VOCs. preprints. AIChE Spring meeting, Houston, TX, March, 1995
go back to reference Strakes G, Bielgus J (1992) New chip thickness screening system boosts efficiency, extends wear life. Pulp Pap, July, p 93 Strakes G, Bielgus J (1992) New chip thickness screening system boosts efficiency, extends wear life. Pulp Pap, July, p 93
go back to reference Stratton S, Gleadow P (2003) Pulp mill process closure: a review of global technology developments and mill experiences in the 1990s. Technical bulletin no. 860. Research. National Council for Air and Stream Improvement, Inc., Triangle Park Stratton S, Gleadow P (2003) Pulp mill process closure: a review of global technology developments and mill experiences in the 1990s. Technical bulletin no. 860. Research. National Council for Air and Stream Improvement, Inc., Triangle Park
go back to reference Stratton S, Gleadow P, Johnson A (2003) Pulp mill process closure: a review of global technology developments and mill experiences. In: The 1990s international Water Association conference, Seattle, USA Stratton S, Gleadow P, Johnson A (2003) Pulp mill process closure: a review of global technology developments and mill experiences. In: The 1990s international Water Association conference, Seattle, USA
go back to reference Stubenvoll J, Holzerbauer, E, Böhmer, S (2007) Overview of NOx and dust emissions of the Austrian pulp and paper industry, Unweltbundesamt, 2007 Stubenvoll J, Holzerbauer, E, Böhmer, S (2007) Overview of NOx and dust emissions of the Austrian pulp and paper industry, Unweltbundesamt, 2007
go back to reference Suhr M (2000) The BREF in the pulp and paper industry. BAT for an industry with a large variety of raw materials and products. In: European conference on the seville process: a driver for environmental performance in industry, April, 6–7, Stuttgart, Germany Suhr M (2000) The BREF in the pulp and paper industry. BAT for an industry with a large variety of raw materials and products. In: European conference on the seville process: a driver for environmental performance in industry, April, 6–7, Stuttgart, Germany
go back to reference Sun, Y, Lanouette R, Pelletier E, Cloutier JN, Epiney M (2013) Impact of pH during an interstage ozone treatment of thermomechanical pulp. In: PACWEST conference, Kamloops, BC, Canada, 6 pages Sun, Y, Lanouette R, Pelletier E, Cloutier JN, Epiney M (2013) Impact of pH during an interstage ozone treatment of thermomechanical pulp. In: PACWEST conference, Kamloops, BC, Canada, 6 pages
go back to reference Sun Y, Lanouette R, Pelletier E, Cloutier JN, Epiney M (2014a) Fibre performance of mechanical pulp after selective refining combined with interstage ozone treatment. In: IMPC conference, Helsinki, Finland, 10 pages Sun Y, Lanouette R, Pelletier E, Cloutier JN, Epiney M (2014a) Fibre performance of mechanical pulp after selective refining combined with interstage ozone treatment. In: IMPC conference, Helsinki, Finland, 10 pages
go back to reference Sun Y, Lanouette R, Cloutier JN, Pelletier E, Épiney M (2014b) Impact of selective refining combined with inter-stage ozone treatment on thermomechanical pulp. BioResources 9(1):1225–1235 Sun Y, Lanouette R, Cloutier JN, Pelletier E, Épiney M (2014b) Impact of selective refining combined with inter-stage ozone treatment on thermomechanical pulp. BioResources 9(1):1225–1235
go back to reference Süss HU, Del Grosso M (2002) Bleaching of eucalyptus kraft pulp to market pulp brightness in only 2 stages. In: Appita Conference, Rotorua, New Zealand Süss HU, Del Grosso M (2002) Bleaching of eucalyptus kraft pulp to market pulp brightness in only 2 stages. In: Appita Conference, Rotorua, New Zealand
go back to reference Suss HU, Schmidt K, Del Grosso M, Mahagaonkar M (2000) Peroxide application in ECF sequences: a description of the state-of-the-art. Appita 53(2):116–121 Suss HU, Schmidt K, Del Grosso M, Mahagaonkar M (2000) Peroxide application in ECF sequences: a description of the state-of-the-art. Appita 53(2):116–121
go back to reference Talja R, Bäckström, M, Kilian M (1998) Impulse technology – a paper making process for tomorrow, EcoPaperTech, 1998. KCL, Helsinki Talja R, Bäckström, M, Kilian M (1998) Impulse technology – a paper making process for tomorrow, EcoPaperTech, 1998. KCL, Helsinki
go back to reference Tamminen T, Forssen M, Hupa M (2002) Dust and flue gas chemistry during rapid changes in the operation of black liquor recovery boilers: Part 3 – gaseous emissions. Tappi J 1(7):25–29 Tamminen T, Forssen M, Hupa M (2002) Dust and flue gas chemistry during rapid changes in the operation of black liquor recovery boilers: Part 3 – gaseous emissions. Tappi J 1(7):25–29
go back to reference Tana J, Lehtinen KJ (1996) The aquatic environmental impact of pulping and bleaching operations – an overview. Finnish Environmental Agency, Helsinki Tana J, Lehtinen KJ (1996) The aquatic environmental impact of pulping and bleaching operations – an overview. Finnish Environmental Agency, Helsinki
go back to reference Tatsuishi H, Hatano T, Iwai T, Kovasin K (1987) Practical experiences of medium consistency oxygen delignification by Rauma-Repola and Sumitomo heavy industries. In: Tappi international oxygen delignification conference proceedings. Tappi Press, Atlanta, p 209 Tatsuishi H, Hatano T, Iwai T, Kovasin K (1987) Practical experiences of medium consistency oxygen delignification by Rauma-Repola and Sumitomo heavy industries. In: Tappi international oxygen delignification conference proceedings. Tappi Press, Atlanta, p 209
go back to reference Teder A (1968) Redox potential of polysulphide solutions and carbohydrate stabilisations. Sven Pap 71(5):149 Teder A (1968) Redox potential of polysulphide solutions and carbohydrate stabilisations. Sven Pap 71(5):149
go back to reference Teder A, Olm L (1981) Extended delignification by combination of modified kraft pulping and oxygen bleaching. Pap Puu 63(4a):315–326 Teder A, Olm L (1981) Extended delignification by combination of modified kraft pulping and oxygen bleaching. Pap Puu 63(4a):315–326
go back to reference Teixeira DP, Muzio LJ, Montgomery TA (1991) Effect of trace combustion species on SNCR performance. In: International conference on environmental control of combustion processes, joint meeting of the American Flame Research Committee and the Japanese Flame Research Committee, Honolulu, HI. October, 1991 Teixeira DP, Muzio LJ, Montgomery TA (1991) Effect of trace combustion species on SNCR performance. In: International conference on environmental control of combustion processes, joint meeting of the American Flame Research Committee and the Japanese Flame Research Committee, Honolulu, HI. October, 1991
go back to reference Telkkinen, UT (1997) Typen määrä ja vaikutukset sulfaattisellutehtaan kemikaalikierrossa johdettaessa valkaisun vedet kemikaalien talteenottoon. Lic. Tech. thesis. Helsinki University of Technology, Espoo, Finland. (in Finnish) Telkkinen, UT (1997) Typen määrä ja vaikutukset sulfaattisellutehtaan kemikaalikierrossa johdettaessa valkaisun vedet kemikaalien talteenottoon. Lic. Tech. thesis. Helsinki University of Technology, Espoo, Finland. (in Finnish)
go back to reference Tench L, Harper S (1987) Oxygen bleaching practices and benefits – an overview. In: Tappi international oxygen delignification conference proceedings. Tappi Press, Atlanta, p 1 Tench L, Harper S (1987) Oxygen bleaching practices and benefits – an overview. In: Tappi international oxygen delignification conference proceedings. Tappi Press, Atlanta, p 1
go back to reference Tenkanen M, Gellerstedt G, Vuorinen T, Teleman A, Perttula M, Li J, Buchert J (1999) Determination of hexenuronic acid in softwood kraft pulps by three different methods. J Pulp Pap Sci 25(9):306 Tenkanen M, Gellerstedt G, Vuorinen T, Teleman A, Perttula M, Li J, Buchert J (1999) Determination of hexenuronic acid in softwood kraft pulps by three different methods. J Pulp Pap Sci 25(9):306
go back to reference Tervola P, Gullichsen J (2007) Confidence limits in mass balances with application to calculation of pulp washing efficiency. Appita J 60(6):474–481 Tervola P, Gullichsen J (2007) Confidence limits in mass balances with application to calculation of pulp washing efficiency. Appita J 60(6):474–481
go back to reference Theodore L (2008) Electrostatic precipitators in air pollution control equipment calculations, Wiley, 2008 Theodore L (2008) Electrostatic precipitators in air pollution control equipment calculations, Wiley, 2008
go back to reference Thornton J, Ekman R, Holmbom B, Eckerman C (1993) Release of potential anionic trash in peroxide bleaching of mechanical pulp. Pap Ja Puu-Pap Timber 75(6):426–431 Thornton J, Ekman R, Holmbom B, Eckerman C (1993) Release of potential anionic trash in peroxide bleaching of mechanical pulp. Pap Ja Puu-Pap Timber 75(6):426–431
go back to reference Tikka PO, Tahkenen H, Korasin KK (1992) Chip thickness vs. kraft pulping performance, Part I: experiments by multiple hanging baskets. In: Proceedings, 1992 Tappi pulping conference, Boston MA, November 1992, p 555 Tikka PO, Tahkenen H, Korasin KK (1992) Chip thickness vs. kraft pulping performance, Part I: experiments by multiple hanging baskets. In: Proceedings, 1992 Tappi pulping conference, Boston MA, November 1992, p 555
go back to reference Tran HN, Barham D (1991) An overview of ring formation in lime kilns. Tappi J 74(1):131–136 Tran HN, Barham D (1991) An overview of ring formation in lime kilns. Tappi J 74(1):131–136
go back to reference Tran HN, Mao X, Barham D (1993) Mechanisms of ring formation in lime kilns, J Pulp Pap Sci 19(4):167–174 Tran HN, Mao X, Barham D (1993) Mechanisms of ring formation in lime kilns, J Pulp Pap Sci 19(4):167–174
go back to reference Tran H, Bair CM, McBroom RB, Strang W, Morgan B (2001) Partial autocausticizing of kraft smelt with sodium borates. Tappi/Solutions! 84(9):1–16 Tran H, Bair CM, McBroom RB, Strang W, Morgan B (2001) Partial autocausticizing of kraft smelt with sodium borates. Tappi/Solutions! 84(9):1–16
go back to reference Tran KQ, Kilpinen P, Kuma N (2008) In-situ catalytic abatement of NOx during fluidized bed combustionda literature study. Appl Catal B Environ 78:129–138 Tran KQ, Kilpinen P, Kuma N (2008) In-situ catalytic abatement of NOx during fluidized bed combustionda literature study. Appl Catal B Environ 78:129–138
go back to reference Troughton N, Sarot P (1992) The efficient use of hydrogen peroxide as a chemical pulp delignification agent: the macrox system. In: Proceedings Tappi pulping conference. TAPPI PRESS, Atlanta, GA, USA, p 519 Troughton N, Sarot P (1992) The efficient use of hydrogen peroxide as a chemical pulp delignification agent: the macrox system. In: Proceedings Tappi pulping conference. TAPPI PRESS, Atlanta, GA, USA, p 519
go back to reference Tucker P (2002) Changing the balance of power. Solutions 85(2):34–38 Tucker P (2002) Changing the balance of power. Solutions 85(2):34–38
go back to reference Tutus A (2005) The utilization of the boron compounds in pulping and bleaching. In: National boron symposium proceedings, Ankara, 2005, pp 399–404 Tutus A (2005) The utilization of the boron compounds in pulping and bleaching. In: National boron symposium proceedings, Ankara, 2005, pp 399–404
go back to reference Tutus A, Usta M (2004) Bleaching of chemithermomechanical pulp (CTMP) using environmentally friendly chemicals. J Environ Biol 25:141–145 Tutus A, Usta M (2004) Bleaching of chemithermomechanical pulp (CTMP) using environmentally friendly chemicals. J Environ Biol 25:141–145
go back to reference Ulmgren P, Rådeström R (1997) The build-up of phosphorus in a kraft pulp mill and the precipitation of calcium phosphate from green and white liquors. J Pulp Pap Sci 23(2):J52–J58 Ulmgren P, Rådeström R (1997) The build-up of phosphorus in a kraft pulp mill and the precipitation of calcium phosphate from green and white liquors. J Pulp Pap Sci 23(2):J52–J58
go back to reference United Nations Environment Programme (UNEP) (2006) Draft guidelines on best available techniques and provisional guidance on best environmental practices relevant to Article 5 and Annex C of the Stockholm convention on persistent organic pollutants, revised working draft version 25 April 2006 www.chem.unep.ch/pops/ United Nations Environment Programme (UNEP) (2006) Draft guidelines on best available techniques and provisional guidance on best environmental practices relevant to Article 5 and Annex C of the Stockholm convention on persistent organic pollutants, revised working draft version 25 April 2006 www.​chem.​unep.​ch/​pops/​
go back to reference Urbanski R, Lister S, Raoul D (1998) Development of an effective TRS and odor reduction program. Pulp Pap Can 99(8):T278–T281 Urbanski R, Lister S, Raoul D (1998) Development of an effective TRS and odor reduction program. Pulp Pap Can 99(8):T278–T281
go back to reference USEPA (1992) Model pollution prevention plan for the kraft segment of the pulp and paper industry. Region 10, Seattle, WA. EPA 910/9-92-030, September, 1992 USEPA (1992) Model pollution prevention plan for the kraft segment of the pulp and paper industry. Region 10, Seattle, WA. EPA 910/9-92-030, September, 1992
go back to reference USEPA (1976) Technology transfer, environmental pollution control, pulp and paper industry, Part 1: Air, EPA 625/7-76-001. USEPA (1976) Technology transfer, environmental pollution control, pulp and paper industry, Part 1: Air, EPA 625/7-76-001.
go back to reference Vakkilainen EK, Kankkonen S, Suutela J (2008) Advanced efficiency options: increasing electricity generating potential from pulp mills. Pulp Pap Can 109(4):14–18 Vakkilainen EK, Kankkonen S, Suutela J (2008) Advanced efficiency options: increasing electricity generating potential from pulp mills. Pulp Pap Can 109(4):14–18
go back to reference Van heiningen A, Ji Y (2012) Southern pine oxygen delignified pulps produced in a Berty throughflow reactor: how to obtain the highest degree of delignification while maintaining pulp yield and quality. Tappi J 11(3):9–17 Van heiningen A, Ji Y (2012) Southern pine oxygen delignified pulps produced in a Berty throughflow reactor: how to obtain the highest degree of delignification while maintaining pulp yield and quality. Tappi J 11(3):9–17
go back to reference Van Jiang Z-H, Lierop B, Berry R (2000) Hexenuronic acid groups in pulping and bleaching chemistry. TAPPI J 83:1 Van Jiang Z-H, Lierop B, Berry R (2000) Hexenuronic acid groups in pulping and bleaching chemistry. TAPPI J 83:1
go back to reference Van Lierop B, Skothos A, Liebergott N (1996) Section IV: the technology of pulp bleaching, Chapter 5: ozone delignification. In: Dence CW, Reeve DW (eds) Pulp bleaching principles and practices. Tappi Press. Atlanta Van Lierop B, Skothos A, Liebergott N (1996) Section IV: the technology of pulp bleaching, Chapter 5: ozone delignification. In: Dence CW, Reeve DW (eds) Pulp bleaching principles and practices. Tappi Press. Atlanta
go back to reference Vasara P, Jappinen H, Lobbas P (2001) A strategic concepts for best available techniques in the forest industry. Finnish Environment Institute, Oy Edita Ab, Helsinki, p 73. Vasara P, Jappinen H, Lobbas P (2001) A strategic concepts for best available techniques in the forest industry. Finnish Environment Institute, Oy Edita Ab, Helsinki, p 73.
go back to reference Vasudevan B, Panchapakesan B, Gratzl, JS, Holmbom B (1987) The effect of ozone on strength development and brightness reversion characteristics of high yield pulps. In: Proceedings from the 1987 Tappi pulping conference, proceedings, Washington, DC, pp 517–523 Vasudevan B, Panchapakesan B, Gratzl, JS, Holmbom B (1987) The effect of ozone on strength development and brightness reversion characteristics of high yield pulps. In: Proceedings from the 1987 Tappi pulping conference, proceedings, Washington, DC, pp 517–523
go back to reference Vehmaa J, Pikka O (2007) Proceedings of the paperex 2007, New Delhi, India Vehmaa J, Pikka O (2007) Proceedings of the paperex 2007, New Delhi, India
go back to reference Verveka P, Nichols KM, Horton RR, Adams TN (1993) The form of nitrogen in wood and its fate during kraft pulping. In: Proceedings of the Tappi 1993 environmental conference, Tappi Press, Atlanta, pp 777–780 Verveka P, Nichols KM, Horton RR, Adams TN (1993) The form of nitrogen in wood and its fate during kraft pulping. In: Proceedings of the Tappi 1993 environmental conference, Tappi Press, Atlanta, pp 777–780
go back to reference Vuorinen T, Taleman A, Fagerstrom P, Buchert J, Tenkanen M (1996) Selective hydrolysis of hexenuronic acid gr oups and its application in ECF and TCF bleaching of kraft pulps. In: International pulping bleaching conference, Washington DC, USA, Book 1, p 43 Vuorinen T, Taleman A, Fagerstrom P, Buchert J, Tenkanen M (1996) Selective hydrolysis of hexenuronic acid gr oups and its application in ECF and TCF bleaching of kraft pulps. In: International pulping bleaching conference, Washington DC, USA, Book 1, p 43
go back to reference Vuorinen T, Fagerstrom P, Rasanen E, Vikkula A, Henrisson K, Teleman A (1997) Selective hydrolysis of hexenuronic acid groups opens new possibilities for development of bleaching processes. In: 9th international symposium on wood and pulping chemistry, Montreal, QC, Canada, p M4-1 Vuorinen T, Fagerstrom P, Rasanen E, Vikkula A, Henrisson K, Teleman A (1997) Selective hydrolysis of hexenuronic acid groups opens new possibilities for development of bleaching processes. In: 9th international symposium on wood and pulping chemistry, Montreal, QC, Canada, p M4-1
go back to reference Vuorinen T, Fagerstrom P, Buchert J, Tenkanen M, Teleman A (1999) Selective hydrolysis of hexenuronic acid groups and its application in ECF and TCF bleaching of kraft pulps. JPPS 25:5 Vuorinen T, Fagerstrom P, Buchert J, Tenkanen M, Teleman A (1999) Selective hydrolysis of hexenuronic acid groups and its application in ECF and TCF bleaching of kraft pulps. JPPS 25:5
go back to reference Wahren D (1978) Förfarande och anordning för konsolidering och torkning av en fuktig porös bana. Swedish patent no. 7803672-0 Wahren D (1978) Förfarande och anordning för konsolidering och torkning av en fuktig porös bana. Swedish patent no. 7803672-0
go back to reference Walkush K, Gustafson RR (2002) Application of pulping models to investigate the. Performance of commercial continuous digesters. Tappi J 1(5):13–19 Walkush K, Gustafson RR (2002) Application of pulping models to investigate the. Performance of commercial continuous digesters. Tappi J 1(5):13–19
go back to reference Walsh PB, Secombe RC, Hoyos M (1991) Practical mill experience with the use of hydrogen peroxide reinforced extraction stages to reduce and/or eliminate the use of elemental chlorine in hardwood kraft Pulps for AOX reduction. In: Paper presented at pulping Conference held 3–7 November at Orlando, FL, USA: Book 1, p 35 Walsh PB, Secombe RC, Hoyos M (1991) Practical mill experience with the use of hydrogen peroxide reinforced extraction stages to reduce and/or eliminate the use of elemental chlorine in hardwood kraft Pulps for AOX reduction. In: Paper presented at pulping Conference held 3–7 November at Orlando, FL, USA: Book 1, p 35
go back to reference Walter JC (1996) Water reuse through filtration. In: Proceedings of the 1996 Tappi engineering conference (Electronic, available at Tappi website). TAPPI, Atlanta, GA Walter JC (1996) Water reuse through filtration. In: Proceedings of the 1996 Tappi engineering conference (Electronic, available at Tappi website). TAPPI, Atlanta, GA
go back to reference Wang L, Templer R, Murphy RJ (2012) High-solids loading enzymatic hydrolysis of waste papers for biofuel production. Appl Energy 99:23–31 Wang L, Templer R, Murphy RJ (2012) High-solids loading enzymatic hydrolysis of waste papers for biofuel production. Appl Energy 99:23–31
go back to reference Wannenmacher PN, Frederick WJ, Hendrickson KA, Holman KL (1998) The solubility of aluminosilicates in kraft green and white liquors. In: Proceedings of the 1998 international chemical recovery conference. Tappi Press, Atlanta Wannenmacher PN, Frederick WJ, Hendrickson KA, Holman KL (1998) The solubility of aluminosilicates in kraft green and white liquors. In: Proceedings of the 1998 international chemical recovery conference. Tappi Press, Atlanta
go back to reference Warnqvist B, Delin L, Theliander H, Nohlgren I (2000) Teknisk ekonomisk utvärdering avsvartlutförgasningsprocesser. Värmeforsk Service AB, Stockholm Warnqvist B, Delin L, Theliander H, Nohlgren I (2000) Teknisk ekonomisk utvärdering avsvartlutförgasningsprocesser. Värmeforsk Service AB, Stockholm
go back to reference Wedin H (2012) Aspects of extended impregnation kraft cooking for high-yield pulping of hardwood. Ph.D thesis, KTH Royal Institute of Technology, Stockholm, Sweden Wedin H (2012) Aspects of extended impregnation kraft cooking for high-yield pulping of hardwood. Ph.D thesis, KTH Royal Institute of Technology, Stockholm, Sweden
go back to reference Wennerström M (2002) Decreasing brightness reversion with powerful ozone bleaching, at IPBC, Portland, Oregon, USA, p 265 Wennerström M (2002) Decreasing brightness reversion with powerful ozone bleaching, at IPBC, Portland, Oregon, USA, p 265
go back to reference Whitty K, Baxter L (2001) State of the art in black liquor gasification technology. In: Joint international combustion symposium, Kauai, Hawaii, 9–12 September 2001 Whitty K, Baxter L (2001) State of the art in black liquor gasification technology. In: Joint international combustion symposium, Kauai, Hawaii, 9–12 September 2001
go back to reference Whitty K, Nilsson A (2001) Experience from a high temperature, pressurized black liquor gasification pilot plant. In: International chemical recovery conference, Whistler, Canada, 11–14 June 2001 Whitty K, Nilsson A (2001) Experience from a high temperature, pressurized black liquor gasification pilot plant. In: International chemical recovery conference, Whistler, Canada, 11–14 June 2001
go back to reference Whitty K, Verrill CL (2004) A historical look at the development of alternative black liquor recovery technologies and the evolution of black liquor gasifier designs. In: International chemical recovery conference, Charleston, SC, USA, 6–10 June 2004 Whitty K, Verrill CL (2004) A historical look at the development of alternative black liquor recovery technologies and the evolution of black liquor gasifier designs. In: International chemical recovery conference, Charleston, SC, USA, 6–10 June 2004
go back to reference Wilson J (1993) Results from improved brown stock washing. In: TAPPI pulping conference, proceedings. Atlanta, GA, USA, pp 155–157 Wilson J (1993) Results from improved brown stock washing. In: TAPPI pulping conference, proceedings. Atlanta, GA, USA, pp 155–157
go back to reference Woodman J (1993) Pollution prevention technologies for the bleached kraft segment of the U.S pulp and paper industry. US EPA, Washington, DC Woodman J (1993) Pollution prevention technologies for the bleached kraft segment of the U.S pulp and paper industry. US EPA, Washington, DC
go back to reference World Bank (1998) Nitrogen oxides: pollution prevention and control pollution prevention and abatement handbook. World Bank Group, Washington, DC, pp 245–249 World Bank (1998) Nitrogen oxides: pollution prevention and control pollution prevention and abatement handbook. World Bank Group, Washington, DC, pp 245–249
go back to reference Worrell E, Price L, Galitsky C (2004) Emerging energy-efficient technologies in industry: case studies of selected technologies. Lawrence Berkeley National Laboratory, LBNL-54828, Berkeley Worrell E, Price L, Galitsky C (2004) Emerging energy-efficient technologies in industry: case studies of selected technologies. Lawrence Berkeley National Laboratory, LBNL-54828, Berkeley
go back to reference Xu EC (2001) P-RC alkaline peroxide mechanical pulping of hardwood, part 1: aspen, beech, birch, cottonwood and maple. Pulp Paper Can 102(2):44–47 Xu EC (2001) P-RC alkaline peroxide mechanical pulping of hardwood, part 1: aspen, beech, birch, cottonwood and maple. Pulp Paper Can 102(2):44–47
go back to reference Xu T, Slaa JW, Sathaye J (2010) Characterizing costs, savings and benefits of a selection of energy efficient emerging technologies in the United States. California, p 101 Xu T, Slaa JW, Sathaye J (2010) Characterizing costs, savings and benefits of a selection of energy efficient emerging technologies in the United States. California, p 101
go back to reference Yamaguchi A (1983) Operating experiences with the moxy process and quinoid compounds. In: Tappi pulping conference proceedings, Houston, October 24–26, pp 544–548 Yamaguchi A (1983) Operating experiences with the moxy process and quinoid compounds. In: Tappi pulping conference proceedings, Houston, October 24–26, pp 544–548
go back to reference Yanhong G, Jing S, Qun L (2015) China’s high-yield pulp sector and its carbon dioxide emission: considering the saved standing wood as an increase of carbon storage. BioResources 10(1):10–13 Yanhong G, Jing S, Qun L (2015) China’s high-yield pulp sector and its carbon dioxide emission: considering the saved standing wood as an increase of carbon storage. BioResources 10(1):10–13
go back to reference Yant R, Hurst MM (1991) Mill optimization using Monox-L as a replacement for chlorine dioxide. Tappi J 74(4):165–168 Yant R, Hurst MM (1991) Mill optimization using Monox-L as a replacement for chlorine dioxide. Tappi J 74(4):165–168
go back to reference Young J, Start G, Lazorek J (1992) Utilization of an Eop stage during 100 % ClO2 bleaching at Weldwood Hinton. In: CPPA Pacific and Western Branch annual meeting preprints, Technical section, CPPA, Montreal: Section 4A, paper No. 3 Young J, Start G, Lazorek J (1992) Utilization of an Eop stage during 100 % ClO2 bleaching at Weldwood Hinton. In: CPPA Pacific and Western Branch annual meeting preprints, Technical section, CPPA, Montreal: Section 4A, paper No. 3
go back to reference Zhou Y (2004) Overview of High Yield Pulps (HYP) in paper and board. In: PAPTAC 90th annual meeting, 2004, pp B143–B148 (Montreal, Canada) Zhou Y (2004) Overview of High Yield Pulps (HYP) in paper and board. In: PAPTAC 90th annual meeting, 2004, pp B143–B148 (Montreal, Canada)
go back to reference Zhou Y, Zhang D, Li G (2005) An overview of BCTMP: process, development, pulp quality and utilization. China Pulp Pap 24(5):51–60 Zhou Y, Zhang D, Li G (2005) An overview of BCTMP: process, development, pulp quality and utilization. China Pulp Pap 24(5):51–60
Metadata
Title
Minimum Impact Mill Technologies
Author
Pratima Bajpai
Copyright Year
2015
DOI
https://doi.org/10.1007/978-3-319-18744-0_4