Skip to main content
Top
Published in: International Journal on Interactive Design and Manufacturing (IJIDeM) 3/2014

01-08-2014 | Technical Paper

Mixing real and virtual components in automated manufacturing systems using PLM tools

Authors: Mauricio Hincapié, Miguel de Jesús Ramírez, Antonio Valenzuela, José Alberto Valdez

Published in: International Journal on Interactive Design and Manufacturing (IJIDeM) | Issue 3/2014

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The automation of manufacturing systems is one of the most important aspects that need to be taken care of during a design process. The Product Lifecycle Management (PLM) tools allow for the designing of automated systems even before acquiring all the hardware and/or software. This paper shows the use of this PLM kind of tools for mixing virtual and real components on an automated manufacturing system through the implementation of four different case scenarios: using the real process/real controller to the virtual process/virtual controller, real process/real controller to real process/virtual controller and finally, virtual process/real controller to virtual process/virtual controller. These scenarios will be described along with their purposes and the tools used to achieve them. Dassault Systemes DELMIA Automation is used as a PLM tool and is combined with the hardware and software required to achieve each case scenario. The case study used is the Flexible Manufacturing System in the Mechatronics laboratory at the Tecnológico de Monterrey; it’s also presented an implementation of these scenarios in a Manufacturing Systems Automation laboratory class. This study examines students’ use of technology for learning compared to more traditional learning methods. Results suggest that there is more than one good way to learn.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Guerra, D., Ramires, R., Donato, L., Molina, A.: Digital Manufacturing for Aerospace industry: Experimental Aircraft. In: Proceedings of Virtual Concepts. Playa del Carmen, México (2006) Guerra, D., Ramires, R., Donato, L., Molina, A.: Digital Manufacturing for Aerospace industry: Experimental Aircraft. In: Proceedings of Virtual Concepts. Playa del Carmen, México (2006)
2.
go back to reference Chryssolouris, G., Mavrikios, D., Papakostas, N., et al.: Digital manufacturing: history, perspectives, and outlook. J. Eng. Manuf. 223 Part B (2008) Chryssolouris, G., Mavrikios, D., Papakostas, N., et al.: Digital manufacturing: history, perspectives, and outlook. J. Eng. Manuf. 223 Part B (2008)
3.
go back to reference Moore, P., Pu, J., Ng, H., et al.: Virtual Engineering: an integrated approach to agile manufacturing machinery design and control. Mechatronics 13 (2003) Moore, P., Pu, J., Ng, H., et al.: Virtual Engineering: an integrated approach to agile manufacturing machinery design and control. Mechatronics 13 (2003)
4.
go back to reference Digital Manufacturing, The PLM Approach to Better Manufacturing Processes. Tech-Clarity Inc Whitepaper (2004) Digital Manufacturing, The PLM Approach to Better Manufacturing Processes. Tech-Clarity Inc Whitepaper (2004)
5.
go back to reference Mujber, T., Szecsi, T., Hashmi, M.: Virtual reality applications in manufacturing process simulation. J. Mater. Process. Technol. (2004) Mujber, T., Szecsi, T., Hashmi, M.: Virtual reality applications in manufacturing process simulation. J. Mater. Process. Technol. (2004)
6.
go back to reference Valentini, P.: Interactive cable harnessing in augmented reality. Int. J. Interact. Des. Manuf. 5(1), 45–53 (2011) Valentini, P.: Interactive cable harnessing in augmented reality. Int. J. Interact. Des. Manuf. 5(1), 45–53 (2011)
7.
go back to reference Eissele, M., Siemoneit, O., Ertl, T.: Transition of mixed, virtual, and augmented reality in smart production environments-an interdisciplinary view. IEEE (2006) Eissele, M., Siemoneit, O., Ertl, T.: Transition of mixed, virtual, and augmented reality in smart production environments-an interdisciplinary view. IEEE (2006)
8.
go back to reference Alleman, M.: Analysis PLM: delivering compliance and agility. IET Manuf Eng (2006) Alleman, M.: Analysis PLM: delivering compliance and agility. IET Manuf Eng (2006)
9.
go back to reference Kiefer, J.: Mechatronikorientierte Planung automatisierter Fertigungszellen im Bereich Karosserierohbau. UNIVERSITÄT DES SAARLANDES SCHRIFTENREIHE PRODUKTIONSTECHNIK (2007) Kiefer, J.: Mechatronikorientierte Planung automatisierter Fertigungszellen im Bereich Karosserierohbau. UNIVERSITÄT DES SAARLANDES SCHRIFTENREIHE PRODUKTIONSTECHNIK (2007)
10.
go back to reference Caie, J.: Discrete Manufacturers Driving Results with DELMIA V5 Automation Platform. ARC White Paper, ARC Advisory Group (2008) Caie, J.: Discrete Manufacturers Driving Results with DELMIA V5 Automation Platform. ARC White Paper, ARC Advisory Group (2008)
11.
go back to reference Harbach, F., Janschek, K., et al.: G. Herausfordernde Anwendungsgebiete der Automatisierungstechnik (Challenging application areas of automation technology). Automatisierungstechnik 55, 5 (2007)CrossRef Harbach, F., Janschek, K., et al.: G. Herausfordernde Anwendungsgebiete der Automatisierungstechnik (Challenging application areas of automation technology). Automatisierungstechnik 55, 5 (2007)CrossRef
12.
go back to reference Rossdeutscher, M., Zuern, M., Berger, U.: Virtual robot program development for assembly process using rigid-body simulation. In: (ed.) IEEE International Conference on Computer Supported Cooperative Work in Design (2010) Rossdeutscher, M., Zuern, M., Berger, U.: Virtual robot program development for assembly process using rigid-body simulation. In: (ed.) IEEE International Conference on Computer Supported Cooperative Work in Design (2010)
13.
go back to reference Drath, R. Weber, P., Mouser, N.: An evolutionary approach for the industrial introduction of virtual commissioning. IEEE (2008) Drath, R. Weber, P., Mouser, N.: An evolutionary approach for the industrial introduction of virtual commissioning. IEEE (2008)
14.
go back to reference Vijayan, J.: The data builds the products. Comput. World (2003) Vijayan, J.: The data builds the products. Comput. World (2003)
15.
go back to reference Williams, R., Klenke, R., Aylo, J.: Teaching computer design using virtual prototyping. IEEE Trans. Edu. 48(2) (2003) Williams, R., Klenke, R., Aylo, J.: Teaching computer design using virtual prototyping. IEEE Trans. Edu. 48(2) (2003)
16.
go back to reference Lee, G.: Virtual prototyping on personal computers. Mech. Eng. (1995) Lee, G.: Virtual prototyping on personal computers. Mech. Eng. (1995)
17.
go back to reference Hu, W., Starr, A. G., Leung, A.: Two diagnostic models for PLC controlled flexible manufacturing systems. Int. J. Mach. Tools Manuf. (1999) Hu, W., Starr, A. G., Leung, A.: Two diagnostic models for PLC controlled flexible manufacturing systems. Int. J. Mach. Tools Manuf. (1999)
18.
go back to reference Rihar, M., Godena, G.: Automation of Specification Process for PLC Control Systems Software. IEEE Xplore; Dept Computer Autoamtion and Control; Jozef Stefan Institute, Slovenia (1999) Rihar, M., Godena, G.: Automation of Specification Process for PLC Control Systems Software. IEEE Xplore; Dept Computer Autoamtion and Control; Jozef Stefan Institute, Slovenia (1999)
19.
go back to reference Pétin, J.-F., Morel, G., Hervé, P.: Formal Specification method for systems automation. In: Centre de Recherche en Automatique de Nancy; Campus Scientifique, FRANCE (2005) Pétin, J.-F., Morel, G., Hervé, P.: Formal Specification method for systems automation. In: Centre de Recherche en Automatique de Nancy; Campus Scientifique, FRANCE (2005)
21.
go back to reference Debevec, K., Shih, M.-Y., Kashyap, V.: Learning strategies and performance in a technology integrated classroom. J. Res. Technol. Educ. 38, 293–307 (2006) Debevec, K., Shih, M.-Y., Kashyap, V.: Learning strategies and performance in a technology integrated classroom. J. Res. Technol. Educ. 38, 293–307 (2006)
22.
go back to reference Salazar, E.A., Macias, M.E.: Virtual 3D controllable machine models for implementation of automations laboratories. In: 39th IEEE Frontiers in Education Conference, 2009 FIE ’09, pp 1–5 (2009) Salazar, E.A., Macias, M.E.: Virtual 3D controllable machine models for implementation of automations laboratories. In: 39th IEEE Frontiers in Education Conference, 2009 FIE ’09, pp 1–5 (2009)
23.
go back to reference Coze, Y., Kawski, N., Kulka, T., et al.: Virtual Concept—Real Profit with Digital Manufacturing and Simulation. In: Sogeti DSa ed. Bariet, The Netherlands (2009) Coze, Y., Kawski, N., Kulka, T., et al.: Virtual Concept—Real Profit with Digital Manufacturing and Simulation. In: Sogeti DSa ed. Bariet, The Netherlands (2009)
Metadata
Title
Mixing real and virtual components in automated manufacturing systems using PLM tools
Authors
Mauricio Hincapié
Miguel de Jesús Ramírez
Antonio Valenzuela
José Alberto Valdez
Publication date
01-08-2014
Publisher
Springer Paris
Published in
International Journal on Interactive Design and Manufacturing (IJIDeM) / Issue 3/2014
Print ISSN: 1955-2513
Electronic ISSN: 1955-2505
DOI
https://doi.org/10.1007/s12008-014-0206-7

Other articles of this Issue 3/2014

International Journal on Interactive Design and Manufacturing (IJIDeM) 3/2014 Go to the issue

Premium Partner