Skip to main content
Top

1992 | Book

Mixture Formation in Spark-Ignition Engines

Author: Univ.-Prof. Dipl.-Ing. Dr. sc. techn. Hans Peter Lenz

Publisher: Springer US

insite
SEARCH

About this book

Twentyfour years have gone by since the publication of K. Lohner and H. Muller's comprehen­ sive work "Gemischbildung und Verbrennung im Ottomotor" in 1967 [1.1]' Naturally, the field of mixture formation and combustion in the spark-ignition engine has wit­ nessed great technological advances and many new findings in the intervening years, so that the time seemed ripe for presenting a summary of recent research and developments. There­ fore, I gladly took up the suggestion of the editors of this series of books, Professor Dr. H. List and Professor Dr. A. Pischinger, to write a book summarizing the present state of the art. A center of activity of the Institute of Internal-Combustion Engines and Automotive Engineering at the Vienna Technical University, which I am heading, is the field of mixture formation -there­ fore, many new results that have been achieved in this area in collaboration with the respective industry have been included in this volume. The basic principles of combustion are discussed only to that extent which seemect necessary for an understanding of the effects of mixture formation. The focal point of this volume is the mixture formation in spark-ignition engines, covering both the theory and actual design of the mixture formation units and appropriate intake manifolds. Also, the related measurement technology is explained in this work.

Table of Contents

Frontmatter
1. Basic Principles of Combustion
Abstract
Combustion engines can be functionally defined as follows: Combustion engines are machines utilizing combustion to convert the chemical energy contained in a fuel into the internal energy of a gaseous working medium, and finally transforming this stored energy into mechanical work output. This action can be viewed as sequenced thermodynamic processes occurring in a cycle. All engines considered here are internal combustion engines as it is assumed that combustion occurs within the working medium.
Hans Peter Lenz
2. Basic Principles of Mixture Formation
Abstract
The oxygen required for combustion of fuel in an internal-combustion engine can be supplied to the working cylinder in basically two forms:
  • Chemically bound — either as a fuel constituent or as an additional compound capable of releasing oxygen;
  • In a free, molecular form (O2) contained in the intake air.
Hans Peter Lenz
3. Laboratory Diagnostics
Abstract
The following section is concerned with air mass flow and fuel mass flow measurements in the laboratory as well as measurements of major engine parameters such as fuel consumption, volumetric efficiency, and air-fuel ratio (λ). Moreover, methods for measurement of the intake manifold wall film, droplet sizing during mixture formation, and analysis of injector spray characteristics will be discussed.
Hans Peter Lenz
4. Types of Mixture Formation Systems
Abstract
Mixture formation systems are units which feed fuel to the air flowing into the engine in accordance with the requirements described in the previous chapters.
Hans Peter Lenz
5. Intake Manifold Design
Abstract
As modern engines are expected to feature good response characteristics, maximum performance, i.e., high engine torque, and low fuel consumption while keeping pollutant emissions at a minimum, intake manifolds have to meet the following, clearly defined, main requirements:
  • Fast mixture delivery;
  • Low pressure loss;
  • Uniform mixture distribution;
  • Low fuel-film accumulation.
Hans Peter Lenz
6. Special Mixture Formation Varieties
Abstract
Striving for an optimum mixture formation, i.e., exact metering, fast delivery, uniform distribution as well as good mixture preparation at all engine operating conditions has led to a great variety of possible solutions, which, however, never went into mass production. In most cases this was due to overly high expenditures in relation to the advantages that could have been obtained. The following chapter thus touches only briefly on a few of these special types of mixture formation.
Hans Peter Lenz
7. Bibliography
Hans Peter Lenz
Backmatter
Metadata
Title
Mixture Formation in Spark-Ignition Engines
Author
Univ.-Prof. Dipl.-Ing. Dr. sc. techn. Hans Peter Lenz
Copyright Year
1992
Publisher
Springer US
Electronic ISBN
978-1-4899-2762-0
Print ISBN
978-1-56091-188-3
DOI
https://doi.org/10.1007/978-1-4899-2762-0