Skip to main content
Top

2017 | OriginalPaper | Chapter

10. Modeling Hybrid Vehicles as Switched Systems

Authors : Thomas J. Böhme, Benjamin Frank

Published in: Hybrid Systems, Optimal Control and Hybrid Vehicles

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

This chapter describes the main layouts of hybrid powertrains including all relevant mechatronic subsystems. The focus of this chapter is to describe the hybrid powertrains as switched systems.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Andre M (2004) Real-world driving cycles for measuring cars pollutant emissions—part A: the artemis european driving cycles. Rep Inrets-LTE 411:97 Andre M (2004) Real-world driving cycles for measuring cars pollutant emissions—part A: the artemis european driving cycles. Rep Inrets-LTE 411:97
2.
go back to reference van Basshuysen R (2013) Ottomotor mit Direkteinspritzung: Verfahren, Systeme, Entwicklung, Potenzial. Atz/Mtz-Fachbuch, Springer Fachmedien Wiesbaden van Basshuysen R (2013) Ottomotor mit Direkteinspritzung: Verfahren, Systeme, Entwicklung, Potenzial. Atz/Mtz-Fachbuch, Springer Fachmedien Wiesbaden
3.
go back to reference Baumann BM, Washington G, Glenn BC, Rizzoni G (2000) Mechatronic design and control of hybrid electric vehicles. IEEE/ASME Trans Mechatron 5(1):58–72CrossRef Baumann BM, Washington G, Glenn BC, Rizzoni G (2000) Mechatronic design and control of hybrid electric vehicles. IEEE/ASME Trans Mechatron 5(1):58–72CrossRef
4.
go back to reference Beck R, Richert F, Bollig A, Abel D, Saenger S, Neil K, Scholt T, Noreikat KE (2005) Model predictive control of a parallel hybrid vehicle drivetrain. In: 44th IEEE conference on decision and control, 2005 and 2005 European control conference. CDC-ECC’05. IEEE, pp 2670–2675 Beck R, Richert F, Bollig A, Abel D, Saenger S, Neil K, Scholt T, Noreikat KE (2005) Model predictive control of a parallel hybrid vehicle drivetrain. In: 44th IEEE conference on decision and control, 2005 and 2005 European control conference. CDC-ECC’05. IEEE, pp 2670–2675
5.
go back to reference Boehme T, Metwally O, Becker B, Meinhardt N, Rucht M, Rabba H (2012) A simulation-based comparison of different power split configurations with respect to the system efficiency. In: SAE world congress, Technical paper 2012-01-0438. doi:10.4271/2012-01-0438 Boehme T, Metwally O, Becker B, Meinhardt N, Rucht M, Rabba H (2012) A simulation-based comparison of different power split configurations with respect to the system efficiency. In: SAE world congress, Technical paper 2012-01-0438. doi:10.​4271/​2012-01-0438
6.
go back to reference Boehme TJ, Becker B, Ruben-Weck M, Rothschuh M, Boldt A, Rollinger C, Butz R, Rabba H (2013) Optimal design strategies for different hybrid powertrain configurations assessed with European drive cycles. In: SAE world congress, Technical paper 2013-01-1751. doi:10.4271/2013-01-1751 Boehme TJ, Becker B, Ruben-Weck M, Rothschuh M, Boldt A, Rollinger C, Butz R, Rabba H (2013) Optimal design strategies for different hybrid powertrain configurations assessed with European drive cycles. In: SAE world congress, Technical paper 2013-01-1751. doi:10.​4271/​2013-01-1751
7.
go back to reference Boehme TJ, Frank B, Schultalbers M, Schori M, Lampe B (2013) Solutions of hybrid energy-optimal control for model-based calibrations of HEV powertrains. In: SAE world congress, Technical paper 2013-01-1747. doi:10.4271/2013-01-1747 Boehme TJ, Frank B, Schultalbers M, Schori M, Lampe B (2013) Solutions of hybrid energy-optimal control for model-based calibrations of HEV powertrains. In: SAE world congress, Technical paper 2013-01-1747. doi:10.​4271/​2013-01-1747
8.
go back to reference Boehme TJ, Schori M, Frank B, Schultalbers M, Lampe B (2013) Solution of a hybrid optimal control problem for parallel hybrid vehicles subjected to thermal constraints. In: 52nd IEEE conference on decision and control Boehme TJ, Schori M, Frank B, Schultalbers M, Lampe B (2013) Solution of a hybrid optimal control problem for parallel hybrid vehicles subjected to thermal constraints. In: 52nd IEEE conference on decision and control
9.
go back to reference Boehme TJ, Rothschuh M, Frank B, Schultalbers M, Schori M, Jeinsch T (2014) Multi-objective optimal design of parallel plug-in hybrid powertrain configurations with respect to fuel consumption and driving performance. SAE Int J Alt Power 3(2):176–192. doi:10.4271/2014-01-1158 CrossRef Boehme TJ, Rothschuh M, Frank B, Schultalbers M, Schori M, Jeinsch T (2014) Multi-objective optimal design of parallel plug-in hybrid powertrain configurations with respect to fuel consumption and driving performance. SAE Int J Alt Power 3(2):176–192. doi:10.​4271/​2014-01-1158 CrossRef
10.
go back to reference Branicky MS (1995) Studies in hybrid systems: modeling, analysis, and control. PhD thesis, Massachusetts Institute of Technology Branicky MS (1995) Studies in hybrid systems: modeling, analysis, and control. PhD thesis, Massachusetts Institute of Technology
11.
go back to reference Chi S (2007) Position-sensorless control of permanent magnet synchronous machines over wide speed range. PhD thesis, Ohio state University Chi S (2007) Position-sensorless control of permanent magnet synchronous machines over wide speed range. PhD thesis, Ohio state University
12.
go back to reference Colin G, Bloch G, Chamaillard Y, Ivanco A (2010) A real time neural energy management strategy for a hybrid pneumatic engine. IFAC symposium advances in automotive control. AAC, Munich, pp 75–80 Colin G, Bloch G, Chamaillard Y, Ivanco A (2010) A real time neural energy management strategy for a hybrid pneumatic engine. IFAC symposium advances in automotive control. AAC, Munich, pp 75–80
13.
go back to reference Conlon B (2005) Comparative analysis of single and combined hybrid electrically variable transmission operating mode. In: SAE world congress, Technical paper 2005-01-1162. doi:10.4271/2005-01-1162 Conlon B (2005) Comparative analysis of single and combined hybrid electrically variable transmission operating mode. In: SAE world congress, Technical paper 2005-01-1162. doi:10.​4271/​2005-01-1162
14.
go back to reference Du Z, Cheong KL, Li PY, Chase TR (2013) Fuel economy comparisons of series, parallel and HMT hydraulic hybrid architectures. In: Proceedings of the American control conference, Washington, DC, pp 5974–5979 Du Z, Cheong KL, Li PY, Chase TR (2013) Fuel economy comparisons of series, parallel and HMT hydraulic hybrid architectures. In: Proceedings of the American control conference, Washington, DC, pp 5974–5979
15.
go back to reference Ebbesen S, Elbert P, Guzzella L (2012) Battery state-of-health perceptive energy management for hybrid electric vehicles. IEEE Trans Veh Technol 61(7):2893–2900CrossRef Ebbesen S, Elbert P, Guzzella L (2012) Battery state-of-health perceptive energy management for hybrid electric vehicles. IEEE Trans Veh Technol 61(7):2893–2900CrossRef
16.
go back to reference Ehsani M, Gao Y, Emadi A (2010) Modern electric, hybrid electric, and fuel cell vehicles. Fundamentals, theory, and design, 2nd edn. CRC Press Ehsani M, Gao Y, Emadi A (2010) Modern electric, hybrid electric, and fuel cell vehicles. Fundamentals, theory, and design, 2nd edn. CRC Press
17.
go back to reference Gao DW, Mi C, Emadi A (2007) Modeling and simulation of electric and hybrid vehicles. Proc IEEE 95(4):729–745CrossRef Gao DW, Mi C, Emadi A (2007) Modeling and simulation of electric and hybrid vehicles. Proc IEEE 95(4):729–745CrossRef
18.
go back to reference Gelb G, Richardson N, Wang T, Berman B (1971) An electromechanical transmission for hybrid vehicle power trains—design and dynamometer testing. In: SAE world congress, Technical Paper 710235. doi:10.4271/710235 Gelb G, Richardson N, Wang T, Berman B (1971) An electromechanical transmission for hybrid vehicle power trains—design and dynamometer testing. In: SAE world congress, Technical Paper 710235. doi:10.​4271/​710235
19.
go back to reference Gopal RV, Rousseau AP (2011) System analysis using multiple expert tools. In: SAE world congress, Technical Paper 2011-01-0754 Gopal RV, Rousseau AP (2011) System analysis using multiple expert tools. In: SAE world congress, Technical Paper 2011-01-0754
20.
go back to reference Guzzella L, Sciarretta A (2005) Vehicle propulsion systems. Introduction to modeling and optimization. Springer, Berlin Guzzella L, Sciarretta A (2005) Vehicle propulsion systems. Introduction to modeling and optimization. Springer, Berlin
21.
go back to reference Halbach S, Sharer P, Pagerit S, Rousseau AP, Folkerts C (2010) Model architecture, methods, and interfaces for efficient math-based design and simulation of automotive control systems. In: SAE world congress, Technical Paper 2010-01-0241 Halbach S, Sharer P, Pagerit S, Rousseau AP, Folkerts C (2010) Model architecture, methods, and interfaces for efficient math-based design and simulation of automotive control systems. In: SAE world congress, Technical Paper 2010-01-0241
22.
go back to reference Hofmann P (2010) Hybridfahrzeuge. Springer, Wien, New York Hofmann P (2010) Hybridfahrzeuge. Springer, Wien, New York
23.
go back to reference Holmes A, Schmidt M (2002) Hybrid electric powertrain including a two-mode electrically variable transmission. US Patent 6,478,705 Holmes A, Schmidt M (2002) Hybrid electric powertrain including a two-mode electrically variable transmission. US Patent 6,478,705
24.
go back to reference Hu X, Johannesson L, Murgovski N, Egardt B (2015) Longevity-conscious dimensioning and power management of the hybrid energy storage system in a fuel cell hybrid electric bus. Appl Energy 137:913–924CrossRef Hu X, Johannesson L, Murgovski N, Egardt B (2015) Longevity-conscious dimensioning and power management of the hybrid energy storage system in a fuel cell hybrid electric bus. Appl Energy 137:913–924CrossRef
25.
go back to reference Hu Y, Yurkovich S, Guezennec Y, Bornatico R (2008) Model-based calibration for battery characterization in HEV applications. Proceedings of the 2008 American control conference, Seattle. IEEE, pp 318–325 Hu Y, Yurkovich S, Guezennec Y, Bornatico R (2008) Model-based calibration for battery characterization in HEV applications. Proceedings of the 2008 American control conference, Seattle. IEEE, pp 318–325
26.
go back to reference Isermann R (2007) Mechatronic systems: fundamentals. Springer Science & Business Media Isermann R (2007) Mechatronic systems: fundamentals. Springer Science & Business Media
27.
go back to reference de Jager B, van Keulen T, Kessels J (2013) Optimal control of hybrid vehicles. Springer de Jager B, van Keulen T, Kessels J (2013) Optimal control of hybrid vehicles. Springer
29.
go back to reference Khajepour A, Fallah MS, Goodarzi A (2014) Electric and hybrid vehicles: technologies, modeling and control—a mechatronic approach. Wiley Khajepour A, Fallah MS, Goodarzi A (2014) Electric and hybrid vehicles: technologies, modeling and control—a mechatronic approach. Wiley
30.
go back to reference Kiencke U, Nielsen L (2000) Automotive control systems. for engine, driveline, and vehicle. Springer, Berlin Kiencke U, Nielsen L (2000) Automotive control systems. for engine, driveline, and vehicle. Springer, Berlin
31.
go back to reference Koprubasi K (2008) Modeling and control of a hybrid-electric vehicle for drivability and fuel economy improvements. PhD thesis, The Ohio State University Koprubasi K (2008) Modeling and control of a hybrid-electric vehicle for drivability and fuel economy improvements. PhD thesis, The Ohio State University
32.
go back to reference Kum D, Peng H, Bucknor N (2011) Supervisory control of parallel hybrid electric vehicles for fuel and emission reduction. ASME J Dyn Syst Meas Control 133(6):4498–4503CrossRef Kum D, Peng H, Bucknor N (2011) Supervisory control of parallel hybrid electric vehicles for fuel and emission reduction. ASME J Dyn Syst Meas Control 133(6):4498–4503CrossRef
33.
go back to reference Lee CY, Zhao H, Ma T (2008) A low cost air hybrid concept. In: Les Rencontres Scientifiques de l’IFP—Advances in hybrid powertrains Lee CY, Zhao H, Ma T (2008) A low cost air hybrid concept. In: Les Rencontres Scientifiques de l’IFP—Advances in hybrid powertrains
34.
go back to reference Lee EA (2006) Cyber-physical systems—are computing foundations adequate? In: Workshop NSF on research motivation, techniques and roadmap, cyber-physical systems Lee EA (2006) Cyber-physical systems—are computing foundations adequate? In: Workshop NSF on research motivation, techniques and roadmap, cyber-physical systems
35.
go back to reference Lee EA, Seshia SA (2011) Introduction to embedded systems—a cyber-physical systems approach. LeeSeshia.org Lee EA, Seshia SA (2011) Introduction to embedded systems—a cyber-physical systems approach. LeeSeshia.org
36.
go back to reference Lemaréchal C (1989) Nondifferentiable optimization. In: Handbooks in operations research and management science. Elsevier Science Publishers B.V., North-Holland Lemaréchal C (1989) Nondifferentiable optimization. In: Handbooks in operations research and management science. Elsevier Science Publishers B.V., North-Holland
37.
go back to reference Liu J (2007) Modeling, configuration and control optimization of power-split hybrid vehicles. PhD thesis, The University of Michigan Liu J (2007) Modeling, configuration and control optimization of power-split hybrid vehicles. PhD thesis, The University of Michigan
38.
go back to reference Liu J, Peng H (2006) Control optimization for a power-split hybrid vehicle. In: Proceedings of the 2006 American control conference, Minneapolis, pp 466–471 Liu J, Peng H (2006) Control optimization for a power-split hybrid vehicle. In: Proceedings of the 2006 American control conference, Minneapolis, pp 466–471
39.
go back to reference Loxton R, Lin Q, Teo KL (2013) Minimizing control variation in nonlinear optimal control. Automatica 49(9):2652–2664MathSciNetCrossRef Loxton R, Lin Q, Teo KL (2013) Minimizing control variation in nonlinear optimal control. Automatica 49(9):2652–2664MathSciNetCrossRef
40.
go back to reference Markel T, Brooker A, Hendricks T, Johnson V, Kelly K, Kramer B, O?Keefe M, Sprik S, Wipke K, (2002) ADVISOR: a systems analysis tool for advanced vehicle modeling. J Power Sources 110(2):255–266 Markel T, Brooker A, Hendricks T, Johnson V, Kelly K, Kramer B, O?Keefe M, Sprik S, Wipke K, (2002) ADVISOR: a systems analysis tool for advanced vehicle modeling. J Power Sources 110(2):255–266
41.
go back to reference Matthé R, Eberle U (2014) The voltec system-energy storage and electric propulsion. Elsevier, Amsterdam, The NetherlandsCrossRef Matthé R, Eberle U (2014) The voltec system-energy storage and electric propulsion. Elsevier, Amsterdam, The NetherlandsCrossRef
42.
go back to reference Miller JM (2004) Propulsion systems for hybrid vehicles, vol 45. The Institution of Electrical Engineers Miller JM (2004) Propulsion systems for hybrid vehicles, vol 45. The Institution of Electrical Engineers
43.
go back to reference Miller JM, Everett M (2005) An assessment of ultracapacitors as the power cache in toyota THS-II, GM-Allision AHS-2 and ford FHS hybrid propulsion system. In: Applied power electronics conference and exposition, APEC 2005. Twentieth annual IEEE, pp 481–490 Miller JM, Everett M (2005) An assessment of ultracapacitors as the power cache in toyota THS-II, GM-Allision AHS-2 and ford FHS hybrid propulsion system. In: Applied power electronics conference and exposition, APEC 2005. Twentieth annual IEEE, pp 481–490
44.
go back to reference Morari M, Baotic M, Borrelli F (2003) Hybrid systems modeling and control. Eur J Control 9(2):177–189CrossRefMATH Morari M, Baotic M, Borrelli F (2003) Hybrid systems modeling and control. Eur J Control 9(2):177–189CrossRefMATH
45.
go back to reference Padovani TM, Debert M, Colin G, Chamaillard Y (2013) Optimal energy management strategy including battery health through thermal management for hybrid vehicles. In: Advances in automotive control (AAC 2013), pp 384–389 Padovani TM, Debert M, Colin G, Chamaillard Y (2013) Optimal energy management strategy including battery health through thermal management for hybrid vehicles. In: Advances in automotive control (AAC 2013), pp 384–389
46.
go back to reference Passenberg B, Leibold M, Stursberg O, Buss PC (2011) The minimum principle for time-varying hybrid systems with state switching and jumps. In: Proceedings of the IEEE conference on decision and control, pp 6723–6729 Passenberg B, Leibold M, Stursberg O, Buss PC (2011) The minimum principle for time-varying hybrid systems with state switching and jumps. In: Proceedings of the IEEE conference on decision and control, pp 6723–6729
47.
go back to reference Pichler F, Cifrain M (2014) Application-related battery modelling: from empirical to mechanistic approaches. In: Automotive battery technology, Springer, pp 53–69 Pichler F, Cifrain M (2014) Application-related battery modelling: from empirical to mechanistic approaches. In: Automotive battery technology, Springer, pp 53–69
49.
go back to reference Rao V, Singhal G, Kumar A, Navet N (2005) Battery model for embedded systems. In: 18th international conference on VLSI design, 2005. IEEE, pp 105–110 Rao V, Singhal G, Kumar A, Navet N (2005) Battery model for embedded systems. In: 18th international conference on VLSI design, 2005. IEEE, pp 105–110
50.
go back to reference Reza NJ (2009) Vehicle dynamics. Theory and application. Springer Reza NJ (2009) Vehicle dynamics. Theory and application. Springer
51.
go back to reference Rizzoni G, Guzzella L, Baumann BM (1999) Unified modeling of hybrid electric vehicle drivetrains. IEEE Trans Mechatron 4(3):246–257CrossRef Rizzoni G, Guzzella L, Baumann BM (1999) Unified modeling of hybrid electric vehicle drivetrains. IEEE Trans Mechatron 4(3):246–257CrossRef
52.
go back to reference Roelle MJ, Shaver GM, Gerdes JC (2004) Tackling the transition: a multi-mode combustion model of SI and HCCI for mode transition control. In: ASME 2004 international mechanical engineering congress and exposition. American Society of Mechanical Engineers, pp 329–336 Roelle MJ, Shaver GM, Gerdes JC (2004) Tackling the transition: a multi-mode combustion model of SI and HCCI for mode transition control. In: ASME 2004 international mechanical engineering congress and exposition. American Society of Mechanical Engineers, pp 329–336
53.
go back to reference Sagastizábal C (1997) Nonsmooth optimization. In: Numerical optimization—theoretical and practical aspects, 2nd edn. Springer, Berlin Sagastizábal C (1997) Nonsmooth optimization. In: Numerical optimization—theoretical and practical aspects, 2nd edn. Springer, Berlin
54.
go back to reference Schmidt MR (1996) Two-mode, input-split, parallel, hybrid transmission Schmidt MR (1996) Two-mode, input-split, parallel, hybrid transmission
55.
go back to reference Schmidt MR (1999) Two-mode, compound-split, electro-mechanical vehicular transmission Schmidt MR (1999) Two-mode, compound-split, electro-mechanical vehicular transmission
56.
go back to reference Schori M, Boehme T, Jeinsch T, Schultalbers M (2014) Optimal catalytic converter heating in hybrid vehicles. In: SAE World congress, Technical paper 2014-01-1351. doi:10.4271/2014-01-1351 Schori M, Boehme T, Jeinsch T, Schultalbers M (2014) Optimal catalytic converter heating in hybrid vehicles. In: SAE World congress, Technical paper 2014-01-1351. doi:10.​4271/​2014-01-1351
57.
go back to reference Sciarretta A, di Domenico D, Pognant-Gros P, Zito G (2014) Optimal energy management of automotive battery systems including thermal dynamics and aging. In: Optimization and optimal control in automotive systems, Springer, pp 219–236 Sciarretta A, di Domenico D, Pognant-Gros P, Zito G (2014) Optimal energy management of automotive battery systems including thermal dynamics and aging. In: Optimization and optimal control in automotive systems, Springer, pp 219–236
58.
go back to reference Silva C, Farias T, Frey H, Rouphail N (2006) Evaluation of numerical models for simulation of real-world hot-stabilized fuel consumption and emissions of gasoline light-duty vehicles. Transp Res Part D 1(5):377–385CrossRef Silva C, Farias T, Frey H, Rouphail N (2006) Evaluation of numerical models for simulation of real-world hot-stabilized fuel consumption and emissions of gasoline light-duty vehicles. Transp Res Part D 1(5):377–385CrossRef
59.
go back to reference Stewart DE (1992) A numerical algorithm for optimal control problems with switching costs. J Aust Math Soc Ser B Appl Math 34(02):212–228MathSciNetCrossRefMATH Stewart DE (1992) A numerical algorithm for optimal control problems with switching costs. J Aust Math Soc Ser B Appl Math 34(02):212–228MathSciNetCrossRefMATH
60.
go back to reference Stockar S, Marano V, Canova M, Rizzoni G, Guzzella L (2011) Energy-optimal control of plug-in hybrid electric vehicles for real-world driving cycles. IEEE Trans Veh Control 60(7):2949–2962CrossRef Stockar S, Marano V, Canova M, Rizzoni G, Guzzella L (2011) Energy-optimal control of plug-in hybrid electric vehicles for real-world driving cycles. IEEE Trans Veh Control 60(7):2949–2962CrossRef
61.
go back to reference Van Der Schaft AJ, Schumacher JM, van der Schaft AJ, van der Schaft AJ (2000) An introduction to hybrid dynamical systems, vol 251. Lecture notes in control and information science. Springer, London Van Der Schaft AJ, Schumacher JM, van der Schaft AJ, van der Schaft AJ (2000) An introduction to hybrid dynamical systems, vol 251. Lecture notes in control and information science. Springer, London
62.
go back to reference Verbrugge M, Tate E (2004) Adaptive state of charge algorithm for nickel metal hydride batteries including hysteresis phenomena. J Power Sources 126(1):236–249CrossRef Verbrugge M, Tate E (2004) Adaptive state of charge algorithm for nickel metal hydride batteries including hysteresis phenomena. J Power Sources 126(1):236–249CrossRef
63.
go back to reference Verdonck N, Chasse A, Pognant-Gros P, Sciarretta A (2010) Automated model generation for hybrid vehicles optimization and control. Oil & Gas Science and Technology-Revue de lInstitut Français du Pétrole 65(1):115–132CrossRef Verdonck N, Chasse A, Pognant-Gros P, Sciarretta A (2010) Automated model generation for hybrid vehicles optimization and control. Oil & Gas Science and Technology-Revue de lInstitut Français du Pétrole 65(1):115–132CrossRef
64.
go back to reference Villeneuve A (2004) Dual mode electric infinitely variable transmission. In: SAE World congress, Technical paper 04CVT-19 Villeneuve A (2004) Dual mode electric infinitely variable transmission. In: SAE World congress, Technical paper 04CVT-19
66.
go back to reference Waltermann P (1996) Modelling and control of the longitudinal and lateral dynamics of a series hybrid vehicle. In: Proceedings of the 1996 IEEE international conference on control applications. IEEE, pp 191–198 Waltermann P (1996) Modelling and control of the longitudinal and lateral dynamics of a series hybrid vehicle. In: Proceedings of the 1996 IEEE international conference on control applications. IEEE, pp 191–198
67.
go back to reference Wang J, Liu P, Hicks-Garner J, Sherman E, Soukiazian S, Verbrugge M, Tataria H, Musser J, Finamore P (2011) Cycle-life model for graphite-LiFePO 4 cells. J Power Sources 196(8):3942–3948CrossRef Wang J, Liu P, Hicks-Garner J, Sherman E, Soukiazian S, Verbrugge M, Tataria H, Musser J, Finamore P (2011) Cycle-life model for graphite-LiFePO 4 cells. J Power Sources 196(8):3942–3948CrossRef
68.
go back to reference Ward J, Moawad A, Kim N, Rousseau A (2012) Light-duty vehicle fuel consumption, cost and market penetration potential by 2020. EVS26, Los Angeles, CA Ward J, Moawad A, Kim N, Rousseau A (2012) Light-duty vehicle fuel consumption, cost and market penetration potential by 2020. EVS26, Los Angeles, CA
69.
go back to reference Wei X (2004) Modeling and control of a hybrid electric drive train for optimum fuel economy, performance and drivability. PhD thesis, Ohio State University Wei X (2004) Modeling and control of a hybrid electric drive train for optimum fuel economy, performance and drivability. PhD thesis, Ohio State University
70.
go back to reference Weng C, Sun J, Peng H (2014) A unified open-circuit-voltage model of lithium-ion batteries for state-of-charge estimation and state-of-health monitoring. J Power Sources 258:228–237CrossRef Weng C, Sun J, Peng H (2014) A unified open-circuit-voltage model of lithium-ion batteries for state-of-charge estimation and state-of-health monitoring. J Power Sources 258:228–237CrossRef
71.
go back to reference Zhang B, Mi CC, Zhang M (2011) Charge-depleting control strategies and fuel optimization of blended-mode plug-in hybrid electric vehicles. IEEE Trans Veh Technol 60. doi:10.1109/TVT.2011.2122313 Zhang B, Mi CC, Zhang M (2011) Charge-depleting control strategies and fuel optimization of blended-mode plug-in hybrid electric vehicles. IEEE Trans Veh Technol 60. doi:10.​1109/​TVT.​2011.​2122313
72.
go back to reference Zuurendonk B (2005) Advanced fuel consumption and emission modeling using Willans line scaling techniques for engines. Technische Universiteit Eindhoven, Department Mechanical Engineering Dynamics and Control Technology Group, Technical report Zuurendonk B (2005) Advanced fuel consumption and emission modeling using Willans line scaling techniques for engines. Technische Universiteit Eindhoven, Department Mechanical Engineering Dynamics and Control Technology Group, Technical report
Metadata
Title
Modeling Hybrid Vehicles as Switched Systems
Authors
Thomas J. Böhme
Benjamin Frank
Copyright Year
2017
DOI
https://doi.org/10.1007/978-3-319-51317-1_10