Top

Arabian Journal for Science and Engineering

Published in:

13-07-2021 | Research Article-Mechanical Engineering

Modeling of Time-Varying Surface Roughness Considering Wear Overlap Per Tooth in Ball End Finish Milling

Authors: De-Jun Cheng, Hong-Jie Quan, Su-Jin Kim, Sheng-Wen Zhang, Chun-Yan Zhang

Published in: Arabian Journal for Science and Engineering | Issue 12/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In multi-axis ball end finish milling, the continuous change in cutting contact points produces complex wear overlapping zones. Moreover, each flute bears different actual cutting depths and contact points leading to inconsistent wear overlap distribution per tooth, which significantly affects the surface quality. Therefore, it is necessary to consider the wear overlap distribution per tooth to improve the surface roughness prediction accuracy. To address this issue, a time-varying surface roughness model is proposed considering wear overlap distribution per tooth. First, the model of wear overlap distribution per tooth considering the actual cutting depth and contact point is developed using the combined effects of the milling mechanism per tooth and the element wear model through the worn cutting edge trajectory. Then, the wear overlap distribution per tooth is embedded in the theoretical model of surface roughness through the geometric relationship of tool–workpiece engagement and milling radius model of worn cutter per flute under wear overlapping zones. Finally, the proposed method is validated through a case study. The testing results demonstrate that the wear overlap distribution per tooth and machined surface roughness could be forecasted exactly and effectively by the proposed method.

previous article Experimental and Numerical Study of Cutting Force Performance of Wave Form End Mills on Gray Cast Iron

next article Motion Control of a Spatial Elastic Manipulator in the Presence of Measurement Noises

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Cheng, D.-J.; Oh, Y.-J.; Kim, S.-J.: A new approach for predicting wear overlap geometry in ball end finish milling. Int. J. Adv. Manuf. Technol. 98(9–12), 2677–2691 (2018). https://doi.org/10.1007/s00170-018-2380-4CrossRef

Wojciechowski, S.; Maruda, R.W.; Barrans, S.; Nieslony, P.; Krolczyk, G.M.: Optimisation of machining parameters during ball end milling of hardened steel with various surface inclinations. Measurement 111, 18–28 (2017). https://doi.org/10.1016/j.measurement.2017.07.020CrossRef

Wojciechowski, S.; Matuszak, M.; Powałka, B.; Madajewski, M.; Maruda, R.W.; Królczyk, G.M.: Prediction of cutting forces during micro end milling considering chip thickness accumulation. Int. J. Mach. Tools Manuf. (2019). https://doi.org/10.1016/j.ijmachtools.2019.103466CrossRef

Pavel, R.; Marinescu, I.; Deis, M.; Pillar, J.: Effect of tool wear on surface finish for a case of continuous and interrupted hard turning. J. Mater. Process. Technol. 170(1–2), 341–349 (2005). https://doi.org/10.1016/j.jmatprotec.2005.04.119CrossRef

Özel, T.; Karpat, Y.: Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks. Int. J. Mach. Tools Manuf. 45(4–5), 467–479 (2005). https://doi.org/10.1016/j.ijmachtools.2004.09.007CrossRef

Zhao, Z.; Liu, X.; Yue, C.; Zhang, H.; Li, R.; Liang, S.Y.: Time-varying analytical model of ball-end milling tool wear in surface milling. Int. J. Adv. Manuf. Technol. 108(4), 1109–1123 (2020). https://doi.org/10.1007/s00170-019-04783-yCrossRef

Zhang, X.; Yu, T.; Zhao, J.: Surface generation modeling of micro milling process with stochastic tool wear. Precis. Eng. 61, 170–181 (2020). https://doi.org/10.1016/j.precisioneng.2019.10.015CrossRef

Tan, L.; Yao, C.; Ren, J.; Zhang, D.: Effect of cutter path orientations on cutting forces, tool wear, and surface integrity when ball end milling TC17. Int. J. Adv. Manuf. Technol. 88(9–12), 2589–2602 (2016). https://doi.org/10.1007/s00170-016-8948-yCrossRef

Belguith, R.; Baili, M.; Sai, L.; Said, M.B.; Dessein, G.; Bouzid, W.: Experimental investigation of tool wear and its effect on TiSiN-coated ball-end mill geometry in high-speed milling. Int. J. Adv. Manuf. Technol. 104(9–12), 4063–4075 (2019). https://doi.org/10.1007/s00170-019-04165-4CrossRef

10.

Vopát, T.; Peterka, J.; Šimna, V.; Kuruc, M.: The influence of different types of copy milling on the surface roughness and tool life of end mills. Proc. Eng. 100, 868–876 (2015). https://doi.org/10.1016/j.proeng.2015.01.443CrossRef

11.

Tomas, V.; Jozef, P.; Mario, K.; Ivan, B.: The wear measurement process of ball nose end mill in the copy milling operations. Proc. Eng. 69, 1038–1047 (2014). https://doi.org/10.1016/j.proeng.2014.03.088CrossRef

12.

Peterka, J.; Pokorný, P.: Influence of the lead angle from the vertical axis milling on effective radius of the cutter. Key Eng. Mater. 581, 44–49 (2013). https://doi.org/10.4028/www.scientific.net/KEM.581.44CrossRef

13.

Peterka, J.J.S.V.: A new approach to calculating the arithmetical mean deviation of a profile during copy milling. Strojniski Vestnik 50(12), 594–597 (2004)

14.

Polakovic, M.; Buransky, I.; Peterka, J.J.D.: Simulation concept for machined surface roughness and shape deviations prediction (2008)

15.

Pimenov, D.; Hassui, A.; Wojciechowski, S.; Mia, M.; Magri, A.; Suyama, D.; Bustillo, A.; Krolczyk, G.; Gupta, M.: Effect of the relative position of the face milling tool towards the workpiece on machined surface roughness and milling dynamics. Appl. Sci. 9(5), 842 (2019). https://doi.org/10.3390/app9050842CrossRef

16.

Wojciechowski, S.; Wiackiewicz, M.; Krolczyk, G.M.: Study on metrological relations between instant tool displacements and surface roughness during precise ball end milling. Measurement 129, 686–694 (2018). https://doi.org/10.1016/j.measurement.2018.07.058CrossRef

17.

Wang, L.; Ge, S.; Si, H.; Guan, L.; Duan, F.; Liu, Y.: Elliptical model for surface topography prediction in five-axis flank milling. ChJA (2019). https://doi.org/10.1016/j.cja.2019.06.007CrossRef

18.

Wang, W.; Li, Q.; Jiang, Y.: A novel 3D surface topography prediction algorithm for complex ruled surface milling and partition process optimization. Int. J. Adv. Manuf. Technol. 107(9–10), 3817–3831 (2020). https://doi.org/10.1007/s00170-020-05263-4CrossRef

19.

Chen, W.; Huo, D.; Teng, X.; Sun, Y.: Surface generation modelling for micro end milling considering the minimum chip thickness and tool runout. Proc. CIRP 58, 364–369 (2017). https://doi.org/10.1016/j.procir.2017.03.237CrossRef

20.

Zhang, Q.; Zhang, S.; Shi, W.: Modeling of surface topography based on relationship between feed per tooth and radial depth of cut in ball-end milling of AISI H13 steel. Int. J. Adv. Manuf. Technol. 95(9–12), 4199–4209 (2018). https://doi.org/10.1007/s00170-017-1502-8CrossRef

21.

Zhang, C.; Zhang, H.; Li, Y.; Zhou, L.: Modeling and on-line simulation of surface topography considering tool wear in multi-axis milling process. Int. J. Adv. Manuf. Technol. 77(1–4), 735–749 (2014). https://doi.org/10.1007/s00170-014-6485-0CrossRef

22.

Yang, L.; Wu, S.; Liu, X.; Liu, Z.; Zhu, M.; Li, Z.: The effect of characteristics of free-form surface on the machined surface topography in milling of panel mold. Int. J. Adv. Manuf. Technol. 98(1–4), 151–163 (2017). https://doi.org/10.1007/s00170-017-0698-yCrossRef

23.

Wang, Z.; Wang, B.; Yuan, J.: Modeling of surface topography based on cutting vibration in ball-end milling of thin-walled parts. Int. J. Adv. Manuf. Technol. 101(5–8), 1837–1854 (2018). https://doi.org/10.1007/s00170-018-3095-2CrossRef

24.

Zhang, J.; Zhang, S.; Jiang, D.; Wang, J.; Lu, S.: Surface topography model with considering corner radius and diameter of ball-nose end miller. Int. J. Adv. Manuf. Technol. 106(9–10), 3975–3984 (2020). https://doi.org/10.1007/s00170-019-04897-3CrossRef

25.

Buj-Corral, I.; Vivancos-Calvet, J.; Domínguez-Fernández, A.: Surface topography in ball-end milling processes as a function of feed per tooth and radial depth of cut. Int. J. Mach. Tools Manuf. 53(1), 151–159 (2012). https://doi.org/10.1016/j.ijmachtools.2011.10.006CrossRef

26.

Han, S.G.; Zhao, J.; Zhang, X.F.: Surface topography and roughness simulations for 5-axis ball-end milling. Adv. Mater. Res. 69–70, 471–475 (2009). https://doi.org/10.4028/www.scientific.net/AMR.69-70.471CrossRef

27.

Shujuan, L.; Dong, Y.; Li, Y.; Li, P.; Yang, Z.; Landers, R.G.: Geometrical simulation and analysis of ball-end milling surface topography. Int. J. Adv. Manuf. Technol. 102(5–8), 1885–1900 (2019). https://doi.org/10.1007/s00170-018-03217-5CrossRef

28.

Peng, Z.; Jiao, L.; Yan, P.; Yuan, M.; Gao, S.; Yi, J.; Wang, X.: Simulation and experimental study on 3D surface topography in micro-ball-end milling. Int. J. Adv. Manuf. Technol. 96(5–8), 1943–1958 (2018). https://doi.org/10.1007/s00170-018-1597-6CrossRef

29.

Zhang, C.; Guo, S.; Zhang, H.; Zhou, L.: Modeling and predicting for surface topography considering tool wear in milling process. Int. J. Adv. Manuf. Technol. 68(9–12), 2849–2860 (2013). https://doi.org/10.1007/s00170-013-4989-7CrossRef

30.

Chen, H.-Q.; Wang, Q.-H.: Modeling and simulation of the surface topography in ball-end milling based on biharmonic spline interpolation. Int. J. Adv. Manuf. Technol. 99(9–12), 2451–2466 (2018). https://doi.org/10.1007/s00170-018-2615-4CrossRef

31.

Hao, Y.; Liu, Y.: Analysis of milling surface roughness prediction for thin-walled parts with curved surface. Int. J. Adv. Manuf. Technol. 93(5–8), 2289–2297 (2017). https://doi.org/10.1007/s00170-017-0615-4CrossRef

32.

Chen Zhang, L.Z.; Liu, X.: Investigations on model-based simulation of tool wear with carbide tools in milling operation. Int. J. Adv. Manuf. Technol. (2013). https://doi.org/10.1007/s00170-012-4108-1CrossRef

33.

Zhang, G.; To, S.; Zhang, S.: Evaluation for tool flank wear and its influences on surface roughness in ultra-precision raster fly cutting. IJMS 118, 125–134 (2016). https://doi.org/10.1016/j.ijmecsci.2016.09.013CrossRef

34.

Yang, D.; Liu, Z.: Surface plastic deformation and surface topography prediction in peripheral milling with variable pitch end mill. Int. J. Mach. Tools Manuf. 91, 43–53 (2015). https://doi.org/10.1016/j.ijmachtools.2014.11.009CrossRef

35.

Ren, W.; Xu, J.; Lin, J.; Yu, Z.; Yu, P.; Lian, Z.; Yu, H.: Research on homogenization and surface morphology of Ti-6Al-4V alloy by longitudinal-torsional coupled ultrasonic vibration ball-end milling. Int. J. Adv. Manuf. Technol. 104(1–4), 301–313 (2019). https://doi.org/10.1007/s00170-019-03668-4CrossRef

36.

Ma, L.; Cai, C.; Tan, Y.; Gong, Y.; Zhu, L.: Theoretical model of transverse and longitudinal surface roughness and study on brittle–ductile transition mechanism for turning Fluorophlogopite ceramic. IJMS 150, 715–726 (2019). https://doi.org/10.1016/j.ijmecsci.2018.10.059CrossRef

37.

Liu, C.; Gao, L.; Wang, G.; Xu, W.; Jiang, X.; Yang, T.: Online reconstruction of surface topography along the entire cutting path in peripheral milling. IJMS (2020). https://doi.org/10.1016/j.ijmecsci.2020.105885CrossRef

38.

Xu, J.; Xu, L.; Geng, Z.; Sun, Y.; Tang, K.: 3D surface topography simulation and experiments for ball-end NC milling considering dynamic feedrate. CIRP J. Manuf. Sci. Technol. (2020). https://doi.org/10.1016/j.cirpj.2020.05.011CrossRef

39.

Layegh, K.S.E.; Lazoglu, I.: 3D surface topography analysis in 5-axis ball-end milling. CIRP Ann. 66(1), 133–136 (2017). https://doi.org/10.1016/j.cirp.2017.04.021CrossRef

40.

Wang, L.; Ge, S.; Si, H.; Yuan, X.; Duan, F.: Roughness control method for five-axis flank milling based on the analysis of surface topography. IJMS (2020). https://doi.org/10.1016/j.ijmecsci.2019.105337CrossRef

41.

Zhang, X.; Yu, T.; Dai, Y.; Qu, S.; Zhao, J.: Energy consumption considering tool wear and optimization of cutting parameters in micro milling process. IJMS (2020). https://doi.org/10.1016/j.ijmecsci.2020.105628CrossRef

42.

Podulka, P.: The effect of dimple distortions on surface topography analysis. In: Advances in Manufacturing II. Lecture Notes in Mechanical Engineering, pp. 122–133. https://doi.org/10.1007/978-3-030-18682-1_10 (2019)

43.

Jithin, S.; Bhandarkar, U.V.; Joshi, S.S.: Three-dimensional topography analysis of electrical discharge textured SS304 surfaces. J. Manuf. Process. 60, 384–399 (2020). https://doi.org/10.1016/j.jmapro.2020.10.066CrossRef

Title: Modeling of Time-Varying Surface Roughness Considering Wear Overlap Per Tooth in Ball End Finish Milling
Authors: De-Jun Cheng
Hong-Jie Quan
Su-Jin Kim
Sheng-Wen Zhang
Chun-Yan Zhang
Publication date: 13-07-2021
Publisher: Springer Berlin Heidelberg
Published in: Arabian Journal for Science and Engineering / Issue 12/2021
Print ISSN: 2193-567X
Electronic ISSN: 2191-4281
DOI: https://doi.org/10.1007/s13369-021-05920-0

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 12/2021

Nonlinear Static Analysis of a Bi-directional Functionally Graded Microbeam Based on a Nonlinear Elastic Foundation Using Modified Couple Stress Theory

Energy and Exergy Analyses of a Refrigerant Pump Integrated Dual-Ejector Refrigeration (DER) System

Impact and Shear Behavior of PLA/12%Cu Reinforced Composite Filament Printed at Different FDM Conditions

Performance Assessment of a Refrigeration System Charged with Different Refrigerants Using Infrared Image Processing Techniques

Optimization of Injection Molding Process of Transparent Complex Multi-Cavity Parts Based on Kriging Model and Various Optimization Techniques

CFD of Flow Dynamic and Heat Transfer Characteristics of Dual Step Cylinders at Re = 2100

Premium Partners