Top

International Journal on Interactive Design and Manufacturing (IJIDeM)

Published in:

07-01-2023 | Original Paper

Multi-objective optimization basing modified Taguchi method to arrive the optimal die design for CGP of AZ31 magnesium alloy

Authors: Muni Tanuja Anantha, Tanya Buddi, Nageswara Rao Boggarapu

Published in: International Journal on Interactive Design and Manufacturing (IJIDeM) | Issue 9/2024

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The article delves into the optimization of die design for the Constrained Groove Pressing (CGP) process of AZ31 magnesium alloy, aiming to improve its mechanical properties. The study utilizes a modified Taguchi method coupled with finite element analysis to identify the optimal die geometry. Key parameters such as groove angle, groove width, and coefficient of friction are systematically varied and analyzed to determine their impact on total deformation, equivalent elastic strain, and equivalent stress. The research highlights the significant contributions of these parameters to the deformation characteristics of the processed AZ31 Mg alloy sheet, ultimately aiming to achieve fine grain size and high equivalent stress with minimal deformation. The multi-objective optimization approach offers a reliable method to balance multiple performance indicators, making this study a valuable resource for specialists in materials science and engineering.

AI Generated

This summary of the content was generated with the help of AI.

previous article Stretch flangeability analysis of heat treated dual phase steel alloy sheet

next article Finite element modeling of two-directional FGM beams under hygrothermal effect

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Pouraliakbar, H., Jandaghi, M.R., Heidarzadeh, A., Jandaghi, M.M.: Constrained groove pressing, cold-rolling, and post-deformation isothermal annealing: consequences of their synergy on material behavior. Mater. Chem. Phys. 206, 85–93 (2018). https://doi.org/10.1016/j.matchemphys.2017.12.010CrossRef

Thuy, P.T., Hue, D.T.H., Ngung, D.M., Quang, P.: A study on microstructure and mechanical properties of AZ31 magnesium alloy after constrained groove pressing. IOP Conf. Ser. Mater. Sci. Eng. 611, 012005 (2019). https://doi.org/10.1088/1757-899X/611/1/012005CrossRef

Brandão, P., Infante, V., Deus, A.M.: Thermo-mechanical modeling of a high pressure turbine blade of an airplane turbine engine. Procedia Struct. Integr. 1, 189–196 (2016). https://doi.org/10.1016/j.prostr.2016.02.026CrossRef

Nazari, F., Honarpisheh, M.: Analytical and experimental investigation of deformation in constrained groove pressing process. Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci. 233(11), 3751–3759 (2019). https://doi.org/10.1177/0954406218809738CrossRef

Mwita, W.M., Akinlabi, E.T.: Numerical prediction of tensile yield strength and microhardness of Ti6Al4V alloy processed by constrained bending and straightening severe plastic deformation. Mater. Res. Express (2019). https://doi.org/10.1088/2053-1591/ab39a9CrossRef

Moskvichev, E., Kozulin, A., Krasnoveikin, V., Skripnyak, V.: Numerical simulation of deformation behavior of aluminum alloy sheets under processing by groove pressing method. MATEC Web Conf. 143, 01011 (2018). https://doi.org/10.1051/matecconf/201814301011CrossRef

Solhjoet, N., Varposhty, A.R., Mokhtarian, H., Manian, A.: A comparative study to evaluate the efficiency of RCS and CGP processes. Indian J. Sci. Res. 1(2), 563–572 (2014)

Mwita, W.M., Akinlabi, E.T., Sanusi, K.O.: Performance and prospects of severe plastic deformation for effective biomedical titanium alloys. J. Mod. Mater. 5(1), 8–23 (2018). https://doi.org/10.21467/jmm.5.1.8-23CrossRef

Xue, K.M., Liu, M., Yan, S.L., Wang, Z., Hua, Y.L., Li, P.: Synergic improvement of plasticity and strength of Al–Zn–Mg–Cu alloy by grain refinement and precipitates redistribution using cyclic extrusion compression. Adv. Eng. Mater. 20(8), 1–9 (2018). https://doi.org/10.1002/adem.201800140CrossRef

10.

Hoseini-Athar, M.M., Mahmudi, R., Prasath Babu, R., Hedström, P.: Microstructural evolution and superplastic behavior of a fine-grained Mg–Gd alloy processed by constrained groove pressing. Mater. Sci. Eng. A 754, 390–399 (2019). https://doi.org/10.1016/j.msea.2019.03.082CrossRef

11.

Yogesha, K.K., Kumar, N., Joshi, A., Jayaganthan, R., Nath, S.K.: A comparative study on tensile and fracture behavior of Al–Mg alloy processed through cryorolling and cryo groove rolling. Metallogr. Microstruct. Anal. 5(3), 251–263 (2016). https://doi.org/10.1007/s13632-016-0282-0CrossRef

12.

Muni Tanuja, A., Kumar, A., Nageswara Rao, B.: Review on the application of CGP to improve AZ31 Mg alloy properties. In: Applications of Computational Methods in Manufacturing and Product Design. Lecture Notes in Mechanical Engineering. Springer, Singapore (2022). https://doi.org/10.1007/978-981-19-0296-3_21

13.

Sunil, B.R., Kumar, A.A., SampathKumar, T.S., Chakkingal, U.: Role of biomineralization on the degradation of fine grained AZ31 magnesium alloy processed by groove pressing. Mater. Sci. Eng. C 33(3), 1607–1615 (2013). https://doi.org/10.1016/j.msec.2012.12.095CrossRef

14.

Fong, K.S., Tan, M.J., Ng, F.L., Danno, A., Chua, B.W.: Microstructure stability of a fine-grained AZ31 magnesium alloy processed by constrained groove pressing during isothermal annealing. J. Manuf. Sci. Eng. 139(8), 081007 (2017). https://doi.org/10.1115/1.4036529CrossRef

15.

Liu, K., Chen, X.-G.: Development of Al–Mn–Mg 3004 alloy for applications at elevated temperature via dispersoid strengthening. Mater. Des. 84(5), 340–350 (2015). https://doi.org/10.1016/j.matdes.2015.06.140CrossRef

16.

Thangapandian, N., Prabu, S.B., Padmanabhan, K.A.: Effects of die profile on grainrefinement in Al-Mg alloy processed by repetitive corrugation and straightening. Mater. Sci. Eng. A 649, 229–238 (2016). https://doi.org/10.1016/j.msea.2015.09.051CrossRef

17.

Moradpour, M., Khodabakhshi, F., Eskandari, H.: Microstructure–mechanical property relationship in an Al–Mg alloy processed by constrained groove pressing-cross route. Mater. Sci. Technol. 34(8), 1003–1017 (2018). https://doi.org/10.1080/02670836.2017.1416906CrossRef

18.

Sajadi, A., Djavanroodi, F., Borhani, M.: Experimental and numerical investigation of groove pressed UFG pure aluminum. Int. J. Adv. Des. Manuf. Technol. 5(2), 1–5 (2012)

19.

Wang, Z., Guan, Y., Wang, T., Zhang, Q., Wei, X., Fang, X., Zhu, G., Gao, S.: Microstructure and mechanical properties of AZ31 magnesium alloy sheets processed by constrained groove pressing. Mater. Sci. Eng. A 745, 450–459 (2019). https://doi.org/10.1016/j.msea.2019.01.006CrossRef

20.

Lee, J.W., Park, J.J.: Numerical and experimental investigations of constrained groove pressing and rolling for grain refinement. J. Mater. Process. Technol. 130–131, 208–213 (2002). https://doi.org/10.1016/S0924-0136(02)00722-7CrossRef

21.

Thuy, P.T., Hue, D.T.H., Ngung, D.M., Quang, P.: A study on microstructure and mechanical properties of AZ31 magnesium alloy after constrained groove pressing. In: IOP Conference Series: Materials Science and Engineering, Volume 611, 2019 International Conference on Advanced Material Research and Processing Technology (AMRPT2019) 19–21 July 2019, Wuhan, China. https://doi.org/10.1088/1757-899X/611/1/012005

22.

Guan, Y., Wang, Z.: Numerical and Experimental Study on Constrained Groove Pressing. InTech open, London (2017). https://doi.org/10.5772/intechopen.68504CrossRef

23.

Saeidi Googarchin, H., Teimouri, B., Hashemi, R.: Analysis of constrained groove pressing and constrained groove pressing-cross route process on AA5052 sheet for automotive body structure applications. J. Automob. Eng. (2018). https://doi.org/10.1177/0954407018785734CrossRef

24.

Kumar, S., Hariharan, K., Digavalli, R.: Hybrid optimization of die design in constrained groove pressing. Mater. Manuf. Process. 35(6), 687–699 (2020). https://doi.org/10.1080/10426914.2020.1729986CrossRef

25.

Reda, R.: Constrained groove pressing (CGP): die design, material processing and mechanical characterization. Fluid Dyn. Mater. Process. FDMP 15(3), 171–185 (2019). https://doi.org/10.32604/fdmp.2019.03923CrossRef

26.

Ross, P.J.: Taguchi Techniques for Quality Engineering. McGraw-Hill, Singapore (1989)

27.

Sastry, K.S.S., Kumar, K.V.D.S.R.M., Priyanka, M., Ram, M.R., Nageswara Rao, B.: Application of Taguchi approach to seek optimum drilling parameters for woven fabric carbon fibre/epoxy laminates. MAYFEB J. Mech. Eng. 1, 29–37 (2017)

28.

Singaravelu, J., Jeyakumar, D., Nageswara Rao, B.: Reliability and safety assessments on satellite separation process of a typical launch vehicle. J. Defense Model. Simul. 9(4), 369–382 (2012)CrossRef

29.

Koneru, S., Srinath, A., Nageswara Rao, B.: Multiobjective optimization for the optimal heat pipe working parameters based on Taguchi’s design of experiments. Heat Transf. (2021). https://doi.org/10.1002/htj.22410CrossRef

30.

Miladinovic, S., Velickovic, S., Loknath, D., Karthik, K., Nageswara Rao, B.: Parameters identification and minimization of safety coefficient for surface durability of internal planetary gear using the modified Taguchi approach. TEST Eng. Manag. 83, 25108–25116 (2020)

31.

Satyanarayana, G., Narayana, K.L., Nageswara Rao, B.: Identification of optimum laser beam welding process parameters for E110 zirconium alloy butt joint based on Taguchi-CFD simulations. Lasers Manuf. Mater. Process. 5(2), 182–193 (2018)CrossRef

32.

Rajyalakshmi, K., Nageswara Rao, B.: Expected range of the output response for the optimum input parameters utilizing the modified Taguchi approach. Multidiscip. Model. Mater. Struct. 15(2), 508–522 (2019). https://doi.org/10.1108/MMMS-05-2018-0088CrossRef

33.

Rajyalakshmi, K., Nageswara Rao, B.: Modified Taguchi approach to trace the optimum GMAW process parameters on weld dilution for ST-37 steel plates. ASTM Int. J. Test. Eval. 47(4), 3209–3223 (2019)CrossRef

34.

Satyanarayana, G., Narayana, K.L., Nageswara Rao, B.: Optimal laser welding process parameters and expected weld bead profile for P92 steel. SN Appl. Sci. 1, 1291 (2019). https://doi.org/10.1007/s42452-019-1333-3CrossRef

35.

Dharmendra, B.V., Kodali, S.P., Nageswara Rao, B.: A simple and reliable Taguchi approach for multi-objective optimization to identify optimal process parameters in nano-powder-mixed electrical discharge machining of INCONEL800 with copper electrode. HELIYON 5, e02326 (2019). https://doi.org/10.1016/j.heliyon.2019.e02326CrossRef

36.

Dharmendra, B.V., Kodali, S.P., Nageswara Rao, B.: Multi-objective optimization for optimum abrasive water jet machining process parameters of Inconel718 adopting the Taguchi approach. Multidiscip. Model. Mater. Struct. 16(2), 306–321 (2020). https://doi.org/10.1108/MMMS-10-2018-0175CrossRef

37.

Satyanarayana, G., Narayana, K.L., Nageswara Rao, B.: Incorporation of Taguchi approach with CFD simulations on laser welding of spacer grid fuel rod assembly. Mater. Sci. Eng. B 269, 115182 (2021). https://doi.org/10.1016/j.mseb.2021.115182CrossRef

38.

Buddi, T., Singh, S.K., Nageswara Rao, B.: Optimum process parameters for plywood manufacturing using soya meal adhesive. Mater. Today Proc. 5, 18739–18744 (2018). https://doi.org/10.1016/j.matpr.2018.06.220CrossRef

39.

Danthala, S., Srinivasa Rao, S., Nageswara Rao, B., Mannepalli, K.: Multi-objective optimization with modified Taguchi approach to specify optimal robot spray painting process parameters. Int. J. Nonlinear Anal. Appl. (IJNAA) 12(2), 1163–1174 (2021). https://doi.org/10.22075/ijnaa.2021.5193CrossRef

40.

Sanjeevannavar, M.B., Banapurmath, N.R., Soudagar, M.E.M., Atgur, V., Hossain, N., Mujtaba, M.A., Yunus Khan, T.M., Nageswar Rao, B., Ismail, K.A., Elfasakhany, A.: Performance indicators for the optimal BTE of biodiesels with additives through engine testing by the Taguchi approach. Chemosphere 288, 132450 (2022). https://doi.org/10.1016/j.chemosphere.2021.132450CrossRef

41.

Mohamed, M.A., Manurung, Y.H., Berhan, M.N.: Model development for mechanical properties and weld quality class of friction stir welding using multi-objective Taguchi method and response surface methodology. J. Mech. Sci. Technol. 29(6), 2323–2331 (2015). https://doi.org/10.1007/s12206-015-0527-xCrossRef

42.

Tong, L.I., Su, C.T., Wang, C.H.: The optimization of multi-response problems in the Taguchi method. Int. J. Qual. Reliab. Manag. 14(4), 367–380 (1997). https://doi.org/10.1108/02656719710170639CrossRef

43.

Antony, J.: Simultaneous optimization of multiple quality characteristics in manufacturing processes using Taguchi’s quality loss function. Int. J. Adv. Manuf. Technol. 17(2), 134–138 (2001). https://doi.org/10.1007/s001700170201CrossRef

44.

Gaitonde, V.N., Karnik, S.R., Paulo Davim, J.: Multi performance optimization in turning of free-machining steel using Taguchi method and utility concept. J. Mater. Eng. Perform. 18, 231–236 (2009)CrossRef

45.

Fedai, Y., Khraman, F., Akin, H.K., Basar, G.: Optimization of machining parameters in face milling using multi-objective Taguchi Technique. Tech. J. 12(2), 104–108 (2018). https://doi.org/10.31803/tg-20180201125123CrossRef

Title: Multi-objective optimization basing modified Taguchi method to arrive the optimal die design for CGP of AZ31 magnesium alloy
Authors: Muni Tanuja Anantha
Tanya Buddi
Nageswara Rao Boggarapu
Publication date: 07-01-2023
Publisher: Springer Paris
Published in: International Journal on Interactive Design and Manufacturing (IJIDeM) / Issue 9/2024
Print ISSN: 1955-2513
Electronic ISSN: 1955-2505
DOI: https://doi.org/10.1007/s12008-022-01176-6

Development and assessment of African star seed (Chrysophyllum albidum) oil-based cutting fluid in turning AA6061 using Taguchi grey relational approach

Original Paper

Experimental and artificial neural network-based slurry erosion behavior evaluation of cast iron

Original Paper

Stretch flangeability analysis of heat treated dual phase steel alloy sheet

Original Paper

Prediction of thermal and residual stress distributions in SS304 materials for nuclear application using finite element analysis

Original Paper

The influence of material stiffness and damping on machining stability in boring tool–workpiece systems using finite element simulation to implement digital twin

Original Article

Thermal simulation of Al alloy developed by wire arc additive manufacturing using finite element analysis

Original Article

Springer Professional

Multi-objective optimization basing modified Taguchi method to arrive the optimal die design for CGP of AZ31 magnesium alloy

Abstract

Abstract

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Other articles of this Issue 9/2024

Development and assessment of African star seed (Chrysophyllum albidum) oil-based cutting fluid in turning AA6061 using Taguchi grey relational approach

Experimental and artificial neural network-based slurry erosion behavior evaluation of cast iron

Stretch flangeability analysis of heat treated dual phase steel alloy sheet

Prediction of thermal and residual stress distributions in SS304 materials for nuclear application using finite element analysis

The influence of material stiffness and damping on machining stability in boring tool–workpiece systems using finite element simulation to implement digital twin

Thermal simulation of Al alloy developed by wire arc additive manufacturing using finite element analysis

Premium Partner

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Development and assessment of African star seed (Chrysophyllum albidum) oil-based cutting fluid in turning AA6061 using Taguchi grey relational approach

Experimental and artificial neural network-based slurry erosion behavior evaluation of cast iron

Stretch flangeability analysis of heat treated dual phase steel alloy sheet

Prediction of thermal and residual stress distributions in SS304 materials for nuclear application using finite element analysis

The influence of material stiffness and damping on machining stability in boring tool–workpiece systems using finite element simulation to implement digital twin

Thermal simulation of Al alloy developed by wire arc additive manufacturing using finite element analysis