Top

Metal Science and Heat Treatment

Published in:

01-01-2015

Nanostructure Mechanism of Formation of Oxide Film in Heat-Resistant Fe – 25Cr – 35Ni Superalloys

Authors: S. Yu. Kondrat’ev, G. P. Anastasiadi, A. I. Rudskoy

Published in: Metal Science and Heat Treatment | Issue 9-10/2015

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

High-temperature oxidation of heat-resistant alloys based on the Fe – Cr – Ni system is investigated. Alloy 25%Cr – 35%Ni – C – Si – Nb is used as an example to show the nanoscale level of the oxidation process. The nature of the process and its kinetics are determined.

previous article Effect of Hot Pressing Modes on the Structure and Properties of an ‘Aluminum – Carbon Nanofibers’ Composite Material

next article Powder Fillers Based on a Nanocrystalline Soft Magnetic Alloy of the Fe – Cu – Nb – Si – B System

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

A. I. Rudskoy, A. S. Oryshchenko, S. Yu. Kondrat’ev, et al., “Special features of structure and long-term strength of cast refractory alloy 5Kh26N33S2B2,” Metalloved. Term. Obrab. Met., No. 4(694), 42 – 47 (2013).

A. I. Rydskoy, A. S. Oryshchenko, S. Yu. Kondrat’ev, et al., “Mechanism and kinetics of phase transformations in refractory alloy 45Kh26N33S2B2 under long high-temperature holds. Part 1,” Metalloved. Term. Obrab. Met., No. 1(703), 3 – 8 (2014).

A. S. Oryshchenko, S. Yu. Kondrat’ev, G. P. Anastasiadi, et al., “Special features of structural changes in refractory alloy 45Kh26N33S2B2 at operating temperatures. Report 1: Cast state,” Nauch.-Tekh. Vedomosti SPbGPU, Ser. “Nauka Obraz.”, No. 1(142), 155 – 163 (2012).

A. I. Rudskoy, S. Yu. Kondrat’ev, G. P. Anastasiadi, et al., “Mechanism and kinetics of phase transformations in refractory alloy 45Kh26N33S2B2 under long high-temperature holds. Part 2,” Metalloved. Term. Obrab. Met., No. 3(705), 12 – 19 (2014).

A. I. Rudskoy, G. P. Anastasiadi, S. Yu. Kondrat’ev, et al., “Effect of the factor of the number of electron vacancies on the kinetics of formation, growth, and dissolution of phases under long high-temperature holds of refractory alloy 0.45C – 26Cr – 33Ni – 2Si – 2Nb,” Fiz. Met. Metalloved., 115(1), 3 – 13 (2014).

N. Birks and G. Meier, An Introduction into High-Temperature Oxidation of Metals [Russian translation], Metallurgiya, Moscow (1987), 184 p.

H. Asteman, J. Svensson, and L. Johansson, “Oxidation of 310 (25/20) steel in H₂O/O₂ mixture at 600°C. Effect of water-vapor- enhanced chromium evaporation,” Corrosion Sci., 44, 2635 – 2649 (2002).CrossRef

C. Ostwald and H. Grabke, “Initial oxidation and chromium diffusion. Effects of surface working on 9 – 20% Cr steels,” Corrosion Sci., 46, 1113 – 1127 (2004).CrossRef

R. F. Voitovich, Oxidation of Carbides and Nitrides [in Russian], Naukova Dumka, Kiev (1981), 192 p.

10.

N. McIntyre, N. Chan, and C. Chen, “Characterization of oxide structures on nickel-chromium alloy during low pressure oxidation at 500 – 600°C,” Oxidation Met., 33(5 – 6), 458 – 479 (1990).

11.

C. L. Angerman, “Long-term oxidation of superalloys,” Oxidation Met., 5(2), 149 – 167 (1972).CrossRef

12.

A. Oscar Quintana Ponce, Structural and Magnetic Studies of an Ex-Service Cast Austenitic Steel Tube Used in Hydrogen Preformers, Author’s Abstract of Doctoral’s Thesis, Chicago, Illinois (2012), 176 p.

13.

D. J. Tillack and J. E. Guthrie, “Wrought and cast heat-resistant stainless steels and nickel alloys for the refining and petrochemical industries,” Nickel Development Inst., Toronto, Technical Ser., No. 10, 71 – 85 (1998).

14.

A. S. Oryshchenko, “Structural materials for radiant coils of high-temperature units of the petrochemical industry,” Metallurg, No. 2, 66 – 68 (2008).

15.

S. B. Maslenkov and E. A. Maslenkova, Steels and Alloys for High Temperatures, In Two Books, Book 1 [in Russian], Metallurgiya, Moscow (1991), 384 p.

16.

D. R. Lide, “Properties of the elements and inorganic compounds: Vapor pressure of the metallic elements,” in: Handbook of Chemistry and Physics, 84 Ed., Online Version, CRC Press, Boca Raton, Florida (2003), Section 4, pp. 4-1 – 4-166.

17.

A. A. Kaya, P. Krauklis, and D. J. Young, “Microstructure of HK40 alloy after high-temperature service in oxidizing/carburizing environment. I. Oxidation phenomena and propagation of a crack,” Mater. Characteriz., 49(1), 11 – 21 (2002).CrossRef

18.

V. B. Trindade, U. Krupp, B. Hunjari, et al., “Effect of alloy grain size on the high-temperature oxidation behavior of the austenitic steel TP347,” Mater. Res., 8(4), 35 – 41 (2005).

Title: Nanostructure Mechanism of Formation of Oxide Film in Heat-Resistant Fe – 25Cr – 35Ni Superalloys
Authors: S. Yu. Kondrat’ev
G. P. Anastasiadi
A. I. Rudskoy
Publication date: 01-01-2015
Publisher: Springer US
Published in: Metal Science and Heat Treatment / Issue 9-10/2015
Print ISSN: 0026-0673
Electronic ISSN: 1573-8973
DOI: https://doi.org/10.1007/s11041-015-9794-5

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 9-10/2015

Complex Hardening of Metastable Stainless Austenitic Steels

High-Temperature Thermomechanical Treatment of Alloyed Structural and Tool Steels

A Study of the Physical Properties of Strontium Titanate Ceramics in the Temperature Range of 8 – 295 K by the Method of Piezoresponse Force Microscopy

Thermomechanical Treatment of Aging Aluminum Alloys

Formation of Packet (Lath) Martensite in Iron-Nickel Alloys

A Study of the Process of Mechanical Alloying of Iron with Austenite-Forming Elements

Premium Partners