Skip to main content
Top
Published in: Metallurgical and Materials Transactions B 2/2021

24-02-2021 | Original Research Article

Numerical Analysis of the Particle Dynamics in a Supersonic Gas Stream with a Modified Point-Particle Euler–Lagrange Approach

Authors: Mingming Li, Lin Li, Lei Shao, Qiang Li, Zongshu Zou, Baokuan Li

Published in: Metallurgical and Materials Transactions B | Issue 2/2021

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Numerical simulations of a gas-particle jet through a Laval nozzle are performed using a modified point-particle Euler–Lagrange approach. By excluding the particle-occupied fluid fraction when solving the fluid phase equations and accounting for gas-particle and inter-particle interactions in the mathematical framework, the particle motion behaviors in gas stream and their impact on gas stream structure are studied, and the nonequilibrium dynamics of the two-phase flow are revealed by depicting the particle velocity and temperature evolution in gas stream. The results indicate that the preferential concentration of particles occurs in gas stream, resulting in nonuniform jet structure. The preferential concentration mainly occurs in nozzle divergent section and makes the local flows there lie in dense regime even if a dilute two-phase flow is predetermined. The level of the preferential concentration increases when the powder feeding rate or the particle size increases. Thus, it is necessary to consider the volumetric displacement effect of dispersed phase when modelling such a gas-particle jet system. Based on the impact of powder blowing parameters on particles motion and distribution and oxygen jet structure, the powder feeding rate no more than 2.0 kg/s and the particle size of 50 to 100 µm are suggested for real industrial operations.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
2.
go back to reference [2] M. Miyata, T. Tamura, and Y. Higuchi: ISIJ Int. 2017, vol. 57, pp. 1751-55.CrossRef [2] M. Miyata, T. Tamura, and Y. Higuchi: ISIJ Int. 2017, vol. 57, pp. 1751-55.CrossRef
3.
go back to reference [3] M. Miyata, T. Tamura, and Y. Higuchi: ISIJ Int. 2017, vol. 57, pp. 1756-61.CrossRef [3] M. Miyata, T. Tamura, and Y. Higuchi: ISIJ Int. 2017, vol. 57, pp. 1756-61.CrossRef
4.
go back to reference [4] Z. Miao, S.B. Kuang, H. Zughbiand, and A.B. Yu: Powder Technol. 2019, vol. 349, pp. 70-83.CrossRef [4] Z. Miao, S.B. Kuang, H. Zughbiand, and A.B. Yu: Powder Technol. 2019, vol. 349, pp. 70-83.CrossRef
5.
6.
7.
go back to reference [7] S. Chellappan, and G. Ramaiyan: Power Technol. 1986, vol. 48, pp. 141-44.CrossRef [7] S. Chellappan, and G. Ramaiyan: Power Technol. 1986, vol. 48, pp. 141-44.CrossRef
8.
go back to reference [8] H. H. Shi, and Y. Kazuki: Acta Mech. Sinica, 2004, vol. 20, pp. 219-27.CrossRef [8] H. H. Shi, and Y. Kazuki: Acta Mech. Sinica, 2004, vol. 20, pp. 219-27.CrossRef
9.
go back to reference [9] Q. Li, Z.S. Zou, and S.M. Tan: Steel Res. Int. 2005, vol. 76, pp. 699-705.CrossRef [9] Q. Li, Z.S. Zou, and S.M. Tan: Steel Res. Int. 2005, vol. 76, pp. 699-705.CrossRef
10.
go back to reference [10] K. Chojnicki, A.B. Clarke, and J.C. Phillips: Geophys. Res. Lett. 2006, vol. 33, pp. 55-60.CrossRef [10] K. Chojnicki, A.B. Clarke, and J.C. Phillips: Geophys. Res. Lett. 2006, vol. 33, pp. 55-60.CrossRef
11.
go back to reference [11] X.Y. Wang, F. Jiang, X. Xu, B.G. Fan, J. Lei, and Y.H. Xiao: Power Technol. 2010, vol. 199, pp. 203-12.CrossRef [11] X.Y. Wang, F. Jiang, X. Xu, B.G. Fan, J. Lei, and Y.H. Xiao: Power Technol. 2010, vol. 199, pp. 203-12.CrossRef
12.
go back to reference [12] Z.Y. Zhou, S.B. Kuang, K.W. Chu, and A.B. Yu: J. Fluid Mech. 2010, vol. 661, pp. 482-510.CrossRef [12] Z.Y. Zhou, S.B. Kuang, K.W. Chu, and A.B. Yu: J. Fluid Mech. 2010, vol. 661, pp. 482-510.CrossRef
13.
go back to reference [13] S.B. Kuang, M.M. Zhou, and A.B. Yu: Powder Technol. 2020, vol. 365, pp. 186-207.CrossRef [13] S.B. Kuang, M.M. Zhou, and A.B. Yu: Powder Technol. 2020, vol. 365, pp. 186-207.CrossRef
14.
go back to reference S.B. Kuang, Z.Y. Li, and A.B. Yu: Steel Res. Int. 2018, vol. 89, pp. 1700071-1/25. S.B. Kuang, Z.Y. Li, and A.B. Yu: Steel Res. Int. 2018, vol. 89, pp. 1700071-1/25.
15.
go back to reference [15] H.P. Zhu, Z.Y. Zhou, R.Y. Yang, and A.B. Yu: Chem. Eng. Sci. 2007, vol. 62, pp. 3378-96.CrossRef [15] H.P. Zhu, Z.Y. Zhou, R.Y. Yang, and A.B. Yu: Chem. Eng. Sci. 2007, vol. 62, pp. 3378-96.CrossRef
16.
go back to reference [16] Y.Q. Feng, and A.B. Yu: Ind. Eng. Chem. Res. 2004, vol. 43, pp. 8378-90.CrossRef [16] Y.Q. Feng, and A.B. Yu: Ind. Eng. Chem. Res. 2004, vol. 43, pp. 8378-90.CrossRef
17.
18.
go back to reference [18] S.V. Apte, K. Mahesh, and T. Lundgren: Int. J. Multiphase Flow, 2008, vol. 34, pp. 260-71.CrossRef [18] S.V. Apte, K. Mahesh, and T. Lundgren: Int. J. Multiphase Flow, 2008, vol. 34, pp. 260-71.CrossRef
20.
21.
go back to reference [21] K.D. Squires, and J.K. Eaton: Phys. Fluid A, 1991, vol. 3, pp. 1169-78.CrossRef [21] K.D. Squires, and J.K. Eaton: Phys. Fluid A, 1991, vol. 3, pp. 1169-78.CrossRef
22.
go back to reference C.T. Crowe, J.D. Schwarzkopf, M. Sommerfeld, and Y. Tsuji: Multiphase Flows with Droplets and Particles. 2011, CRC Press, London, pp. 237-58.CrossRef C.T. Crowe, J.D. Schwarzkopf, M. Sommerfeld, and Y. Tsuji: Multiphase Flows with Droplets and Particles. 2011, CRC Press, London, pp. 237-58.CrossRef
23.
go back to reference [23] R. Ishii, Y. Umeda, and M. Yuhi: J. Fluid Mech. 1989, vol. 203, pp. 475-15.CrossRef [23] R. Ishii, Y. Umeda, and M. Yuhi: J. Fluid Mech. 1989, vol. 203, pp. 475-15.CrossRef
25.
go back to reference [25] M.B. Stakić, G.S. Živković, and M.A. Sijerčić: Int. J. Heat Mass Tran. 2011, vol. 54, pp. 2262-69.CrossRef [25] M.B. Stakić, G.S. Živković, and M.A. Sijerčić: Int. J. Heat Mass Tran. 2011, vol. 54, pp. 2262-69.CrossRef
26.
go back to reference [26] Y. Liu, J. Zhang, J.P. Wei, and X.T. Liu: Powder Technol. 2020, vol. 364, pp. 343-62.CrossRef [26] Y. Liu, J. Zhang, J.P. Wei, and X.T. Liu: Powder Technol. 2020, vol. 364, pp. 343-62.CrossRef
27.
28.
go back to reference [28] G.S. Wei, Y.H. Peng, R. Zhu, L.Z. Yang, and X.T. Wu: ISIJ Int. 2020, vol. 60, pp. 481-91.CrossRef [28] G.S. Wei, Y.H. Peng, R. Zhu, L.Z. Yang, and X.T. Wu: ISIJ Int. 2020, vol. 60, pp. 481-91.CrossRef
29.
go back to reference [29] M.M. Li, L. Li, B. Zhang, Q. Li, W. Wu, and Z.S. Zou: Metall. Mater. Trans. B, 2020, vol. 51, pp. 1718-30.CrossRef [29] M.M. Li, L. Li, B. Zhang, Q. Li, W. Wu, and Z.S. Zou: Metall. Mater. Trans. B, 2020, vol. 51, pp. 1718-30.CrossRef
30.
go back to reference [30] Y.S. Shen, D. Maldonado, B.Y. Guo, A.B. Yu, P. Austin, and P. Zulli: Ind. Eng. Chem. Res. 2009, vol. 48, pp. 10314-23.CrossRef [30] Y.S. Shen, D. Maldonado, B.Y. Guo, A.B. Yu, P. Austin, and P. Zulli: Ind. Eng. Chem. Res. 2009, vol. 48, pp. 10314-23.CrossRef
31.
go back to reference [31] Y.S. Shen, A.B. Yu, and P. Zulli: Steel Res. Int. 2011, vol. 82, pp. 532-42.CrossRef [31] Y.S. Shen, A.B. Yu, and P. Zulli: Steel Res. Int. 2011, vol. 82, pp. 532-42.CrossRef
32.
go back to reference [32] Y.S. Shen, B.Y. Guo, A.B. Yu, P.R. Austin, and P. Zulli: Fuel, 2011, vol. 90, pp. 728-38.CrossRef [32] Y.S. Shen, B.Y. Guo, A.B. Yu, P.R. Austin, and P. Zulli: Fuel, 2011, vol. 90, pp. 728-38.CrossRef
33.
go back to reference [33] J.H. Liao, A.B. Yu, and Y.S. Shen: Powder Technol. 2017, vol. 314, pp. 550-56.CrossRef [33] J.H. Liao, A.B. Yu, and Y.S. Shen: Powder Technol. 2017, vol. 314, pp. 550-56.CrossRef
34.
go back to reference [34] Y.S. Shen, B.Y. Guo, A.B. Yu, D. Maldonado, P. Austin, and P. Zulli: ISIJ Int. 2008, vol. 48, pp. 777-86.CrossRef [34] Y.S. Shen, B.Y. Guo, A.B. Yu, D. Maldonado, P. Austin, and P. Zulli: ISIJ Int. 2008, vol. 48, pp. 777-86.CrossRef
35.
36.
37.
go back to reference [38] M. Sommerfeld: ASME/FED Gas-Particle Flows, 1995, vol. 228, pp. 335-45. [38] M. Sommerfeld: ASME/FED Gas-Particle Flows, 1995, vol. 228, pp. 335-45.
38.
go back to reference [39] T. Tanaka, and Y. Tsuji: ASME/FED Gas-Particle Flows, 1991, vol. 121, pp. 123-28. [39] T. Tanaka, and Y. Tsuji: ASME/FED Gas-Particle Flows, 1991, vol. 121, pp. 123-28.
39.
go back to reference [40] R. Cocco, F. Shaffer, R. Hays, S.B.R. Karri, and T. Knowltoa: Powder Technol. 2010, vol. 203, pp. 3-11.CrossRef [40] R. Cocco, F. Shaffer, R. Hays, S.B.R. Karri, and T. Knowltoa: Powder Technol. 2010, vol. 203, pp. 3-11.CrossRef
40.
go back to reference [36] P. Pakseresht, and S.V. Apte: Int. J. Multiphase Flow, 2019, vol. 113, pp. 16-32.CrossRef [36] P. Pakseresht, and S.V. Apte: Int. J. Multiphase Flow, 2019, vol. 113, pp. 16-32.CrossRef
41.
42.
go back to reference [42] S.V. Apte, K. Mahesh, P. Moin, and J.C. Oefelein: Int. J. Multiphase Flow, 2003, vol. 29, pp. 1311-31.CrossRef [42] S.V. Apte, K. Mahesh, P. Moin, and J.C. Oefelein: Int. J. Multiphase Flow, 2003, vol. 29, pp. 1311-31.CrossRef
43.
go back to reference [43] M. Alam, J. Naser, and G. Brooks: Metall. Mater. Trans. B, 2010, vol. 41, pp. 636-45.CrossRef [43] M. Alam, J. Naser, and G. Brooks: Metall. Mater. Trans. B, 2010, vol. 41, pp. 636-45.CrossRef
44.
go back to reference [44] M. Alam, J. Naser, G. Brooks and A. Fontana: Metall. Mater. Trans. B, 2010, vol. 41, pp. 1354-67.CrossRef [44] M. Alam, J. Naser, G. Brooks and A. Fontana: Metall. Mater. Trans. B, 2010, vol. 41, pp. 1354-67.CrossRef
45.
go back to reference [45] R. Sambasivam, and F. Durst: Ironmak. Steelmak., 2010, vol. 37, pp. 195-203.CrossRef [45] R. Sambasivam, and F. Durst: Ironmak. Steelmak., 2010, vol. 37, pp. 195-203.CrossRef
46.
go back to reference [46] Z.L. Song, M. Ersson, and P.G. Jönsson: Steel Res. Int., 2011, vol. 82, pp. 249-59.CrossRef [46] Z.L. Song, M. Ersson, and P.G. Jönsson: Steel Res. Int., 2011, vol. 82, pp. 249-59.CrossRef
47.
go back to reference [47] Z.L. Song, M. Ersson, and P.G. Jönsson: ISIJ Int., 2011, vol. 51, pp. 1637-46.CrossRef [47] Z.L. Song, M. Ersson, and P.G. Jönsson: ISIJ Int., 2011, vol. 51, pp. 1637-46.CrossRef
49.
go back to reference [49] M.M. Li, Q. Li, S.B. Kuang, and Z.S. Zou: Steel Res. Int. 2015, vol. 86, pp. 1517-29.CrossRef [49] M.M. Li, Q. Li, S.B. Kuang, and Z.S. Zou: Steel Res. Int. 2015, vol. 86, pp. 1517-29.CrossRef
50.
go back to reference FLUENT 14.5 Manual, Ansys Inc., Canonsburg, PA, 2011. FLUENT 14.5 Manual, Ansys Inc., Canonsburg, PA, 2011.
51.
go back to reference [51] B.E. Launder, and D.B. Spalding: Comput. Methods Appl. Mech. Eng. 1974, vol. 3, pp. 269-89.CrossRef [51] B.E. Launder, and D.B. Spalding: Comput. Methods Appl. Mech. Eng. 1974, vol. 3, pp. 269-89.CrossRef
52.
go back to reference [52] R. Clift, and W.H. Gauvin: Revista Argentina De Cardiología, 1970, vol. 82, pp. 14-28. [52] R. Clift, and W.H. Gauvin: Revista Argentina De Cardiología, 1970, vol. 82, pp. 14-28.
53.
go back to reference [53] S. Tenneti, R. Garg, and S. Subramaniam: Int. J. Multiphase Flow, 2011, vol. 37, pp. 1072-92.CrossRef [53] S. Tenneti, R. Garg, and S. Subramaniam: Int. J. Multiphase Flow, 2011, vol. 37, pp. 1072-92.CrossRef
54.
55.
56.
go back to reference P. Orourke, and F. Bracco: Proc. Inst. Mech. Eng., 1980, vol. 9, pp. 101-06. P. Orourke, and F. Bracco: Proc. Inst. Mech. Eng., 1980, vol. 9, pp. 101-06.
57.
go back to reference [57] N. Patankar, and D. Joseph: Int. J. Multiphase Flow, 2001b, vol. 27, pp. 1659-84.CrossRef [57] N. Patankar, and D. Joseph: Int. J. Multiphase Flow, 2001b, vol. 27, pp. 1659-84.CrossRef
58.
go back to reference [58] J.R. Finn, M. Li, and S.V. Apte: J. Fluid Mech. 2016, vol. 796, pp. 340-85.CrossRef [58] J.R. Finn, M. Li, and S.V. Apte: J. Fluid Mech. 2016, vol. 796, pp. 340-85.CrossRef
59.
go back to reference [59] P. Gualtieri, F. Picano, G. Sardina, and C.M. Casciola: J. Fluid Mech. 2015, vol. 773, pp. 520-61.CrossRef [59] P. Gualtieri, F. Picano, G. Sardina, and C.M. Casciola: J. Fluid Mech. 2015, vol. 773, pp. 520-61.CrossRef
60.
61.
go back to reference [61] M. Esmaily, and J. Horwitz: J. Comput. Phys. 2018, vol. 375, pp. 960-82.CrossRef [61] M. Esmaily, and J. Horwitz: J. Comput. Phys. 2018, vol. 375, pp. 960-82.CrossRef
62.
go back to reference [62] S. Balachandar, K. Liu, and M. Lakhote: J. Comput. Phys. 2019, vol. 376, pp. 160-85.CrossRef [62] S. Balachandar, K. Liu, and M. Lakhote: J. Comput. Phys. 2019, vol. 376, pp. 160-85.CrossRef
63.
go back to reference [63] P. Pakseresht, M. Esmaily, and S.V. Apte: J. Comput. Phys. 2020, vol. 420, No. 109711, pp. 1-23. [63] P. Pakseresht, M. Esmaily, and S.V. Apte: J. Comput. Phys. 2020, vol. 420, No. 109711, pp. 1-23.
64.
go back to reference [64] S.A. Morsi, and A.J. Alexander: J. Fluid Mech. 1972, vol. 55, pp. 193-208.CrossRef [64] S.A. Morsi, and A.J. Alexander: J. Fluid Mech. 1972, vol. 55, pp. 193-208.CrossRef
65.
go back to reference Y.A. Cengel, and J.M. Cimbala: Fluid Mechanics: Fundamentals and Applications, 2nd ed., McGraw-Hill, New York, 2013. Y.A. Cengel, and J.M. Cimbala: Fluid Mechanics: Fundamentals and Applications, 2nd ed., McGraw-Hill, New York, 2013.
66.
go back to reference [67] J. Yan, K. Luo, J.R. Fan, and G. Xiao: Journal of Chemical Industry and Engineering, 2008, vol. 59, pp. 866-74. [67] J. Yan, K. Luo, J.R. Fan, and G. Xiao: Journal of Chemical Industry and Engineering, 2008, vol. 59, pp. 866-74.
Metadata
Title
Numerical Analysis of the Particle Dynamics in a Supersonic Gas Stream with a Modified Point-Particle Euler–Lagrange Approach
Authors
Mingming Li
Lin Li
Lei Shao
Qiang Li
Zongshu Zou
Baokuan Li
Publication date
24-02-2021
Publisher
Springer US
Published in
Metallurgical and Materials Transactions B / Issue 2/2021
Print ISSN: 1073-5615
Electronic ISSN: 1543-1916
DOI
https://doi.org/10.1007/s11663-021-02076-y

Other articles of this Issue 2/2021

Metallurgical and Materials Transactions B 2/2021 Go to the issue

Premium Partners