Top

The International Journal of Advanced Manufacturing Technology

Published in:

30-04-2019 | ORIGINAL ARTICLE

Numerical and experimental analysis on multi-pass conventional spinning of the cylindrical part with GH3030

Authors: Zi-Xuan Li, Xue-Dao Shu

Published in: The International Journal of Advanced Manufacturing Technology | Issue 5-8/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Metal spinning, as a kind of rotary forming process, is widely applied in the production of various areas. In this paper, the mathematical model of the conchoid roller path is proposed based on the cylindrical part and applied in the experiments. The possible problems of the roller path and the product shape are verified by 2D simulation, while the 3D simulation is used to predict the product dimensions and defects. Based on the advantage of both 2D and 3D simulation, the flow of target product trial production is proposed. The simulation is verified by the experiments with hard-deformed superalloy GH3030. The crack mechanism of cylindrical part spinning process is studied with a combination of macro- and micro-methods. Results show that the forming effect of the conchoid roller path is good; the flow can reduce the trial production cost and time. The grain elongated obviously at the crack zone while metal accumulated at the edge of the product which is the main cause of the crack.

previous article Characterization of effective Young’s modulus for Fused Deposition Modeling manufactured topology optimization designs

next article A robust optimization design method for sheet metal roll forming and its application in roll forming circular cross-section pipe

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Xia QX, Chen YJ, Qiu HY (2003) Application of the spinning technology in the automobile parts products forming. New Technol New Process 9:29–30 (in Chinese)

Gwak GY, Cho JR, Choi JY, Kim JS (2016) Forming-die-free integrated stub-end manufacturing process using spinning. Int J Precis Eng Manuf 17(5):679–684CrossRef

Gwak GY, Cho JR, Choi JY, Kim JS (2016) Development of integrated stub end by spinning process. Int J Precis Eng Manuf 16(7):1473–1477CrossRef

Kalpakcioglu S (1961) On the mechanics of shear spinning. Trans ASME J Eng Ind 5:125–130CrossRef

Kobayshi S (1963) Instability in conventional spinning of cones. Trans ASME J Eng Ind 2:44–48CrossRef

Sortais HC, Kobayashi S, Thomsen EG (1963) Mechanics of conventional spinning. Trans ASME J Eng Ind 11:346–350CrossRef

Hayama M, Murota T (1963) Study of metal spinning (1st report)-cylindrical shapes. Precis Mach 29(5):369–376 (in Japanese)

Hayama M, Murota T (1963) Study of metal spinning (2nd report)-analysis of conventional simple spinning I. Precis Mach 29(6):427–435 (in Japanese)

Hayama M, Murota T (1963) Study of metal spinning (3rd report)-analysis of conventional simple spinning II. Precis Mach 29(8):580–586 (in Japanese)

10.

Wang ZR, Liu G (1989) A suggestion on the standardization of English technical terminology used in rotary forming. In: Proceedings of the fourth international conference of rotary forming, vol 10, pp 38–41

11.

Avitzur B, Yang CT (1960) Analysis of power spinning of cones. Trans ASME J Eng Ind 8:231–244CrossRef

12.

Kim C, Jung SY, Choi JC (2003) A lower upper-bound solution for shear spinning of cones. Int J Mech Sci 45:1893–1911CrossRef

13.

Kim JH, Park JH, Kim C (2003) A study on the mechanics of shear spinning of cones. J Mech Sci Technol 20(6):806–818CrossRef

14.

Nagarajan HN, Kotrappa H, Mallanna C (1981) Mechanics of flow forming. Ann CIRP 30(1):159–162CrossRef

15.

Wong CC, Dean TA, Lin J (2003) A review of spinning, shear forming and flow forming processes. Int J Mach Tool Manu 43:1419–1435CrossRef

16.

Music O, Allwood JM, Kawai K (2010) A review of the mechanics of metal spinning. J Mater Process Technol 210:3–23CrossRef

17.

Quigley E, Monaghan J (2000) Metal forming: an analysis of spinning processes. J Mater Process Technol 103:114–119CrossRef

18.

Hayama M, Kudo H, Shinokura T (1970) Study of the pass schedule in conventional simple spinning. Bull JSME 13(65):1358–1365CrossRef

19.

Wang L, Long H (2013) Roller path design by tool compensation in multi-pass conventional spinning. Mater Des 46:645–653CrossRef

20.

Wang L, Long H (2011) A study of effects of roller path profiles on tool forces and part wall thickness variation in conventional metal spinning. J Mater Process Technol 211:2140–2151CrossRef

21.

James AP, Julian MA (2015) Parametric toolpath design in metal spinning. CIRP Ann Manuf Technol 64:301–304CrossRef

22.

Jia Z, Han ZR, Fan ZJ, Liu BM (2019) Experimental study on wrinkle suppressing in multi-pass drawing spinning of 304 stainless steel cylinder. Int J Adv Manuf Technol 100:111–116CrossRef

23.

Guo JT (2010) Materials science and engineering for superalloys. Science Press, Beijing (in Chinese)

24.

Klocke F, Wehrmeister T (2013) Laser-assisted metal spinning of advanced materials. In: 4th Lane Conference, Erlangen, Germany

25.

Mori K, Ishiguro M, Isomura Y (2008) Hot shear spinning of cast aluminium alloy parts. J Mater Process Technol 209:3621–3627CrossRef

26.

Simufact.forming, Demos&examples (2016) MSC software corporation, USA

27.

Wang Y, Shu XD, Tian DY, Wei YL, Zhu Y (2017) Influence of process parameters on flange flatness of conical spun parts with thin wall. Mech Sci Technol Aerospace Eng 36:1068–1072 (in Chinese)

Title: Numerical and experimental analysis on multi-pass conventional spinning of the cylindrical part with GH3030
Authors: Zi-Xuan Li
Xue-Dao Shu
Publication date: 30-04-2019
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 5-8/2019
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-019-03767-2

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 5-8/2019

Ultrafast laser structuring of graphene-based multi-zone heaters for the detection of antioxidant capacity

Energy consumption optimization with geometric accuracy consideration for fused filament fabrication processes

Computerized simulation of shortened ingots with a controlled crystallization for manufacturing of high-quality forgings

Some observations in grinding SiC and silicon carbide ceramic matrix composite material

Development of a shaving die design for reducing rollover

Kinematic error compensation of a double swivel head in five-axis abrasive water jet machine tool

Premium Partners