Top

Published in:

2024 | OriginalPaper | Chapter

On the Relevance of Modeling Options in ABAQUS Regarding the Spinning Process Simulation

Authors : Akla-Essoh Claude Korolakina, Pierre-Olivier Bouchard, Katia Mocellin, Ahmed Mehdi Roula, Anne Lepied, Sjoerd Van der Veen

Published in: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity

Publisher: Springer Nature Switzerland

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The chapter delves into the critical aspects of modeling options in ABAQUS for the simulation of spinning processes, with a particular focus on computational efficiency and accuracy. It begins by introducing the spinning process and its applications, highlighting its importance in industries like aerospace. The authors then discuss the intricacies of numerical simulations in spinning processes, emphasizing the need for efficient and accurate modeling strategies. The study presents a detailed case study on cone spinning, comparing results from ABAQUS with those from another finite element software, Forge. The authors investigate various modeling options, such as element types, formulations, and contact methods, and their impact on computational time and results accuracy. The chapter concludes with practical recommendations for optimizing spinning process simulations in ABAQUS, offering valuable insights for professionals seeking to enhance their simulation capabilities.

AI Generated

This summary of the content was generated with the help of AI.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Numerical Simulation of Residual Stress in the JCO-Welding-Calibration Whole Process Forming of the Submarine Pipeline Pipes

next chapter Distortion Reduction in Incremental Beading

The aspect ratio is less than 3, except for the blank central elements involved in the tie constraint, which are not of interest since they do not undergo any deformation.

Intel^® Xeon^® Gold 6148 @ 2.40 GHz.

For each simulation performed, energy plots were used to ensure that the computed solution passes the sanity checks applying to explicit quasi-static analyses.

The implicit and explicit analyses in Abaqus yield similar stress fields.

Only the axial force is shown. The conclusions apply to other components as well.

The model in [8] has a blank meshed with one element across the thickness as well.

Music, O., Allwood, J., Kawai, K.: A review of the mechanics of metal spinning. J. Mater. Process. Technol. 210(1), 3–23 (2010). https://doi.org/10.1016/j.jmatprotec.2009.08.021CrossRef

Hoffman, E.K., et al.: Spin forming Aluminum crew module (CM) metallic Aft pressure vessel bulkhead (APVBH) - Phase II. Technical Publication 20150001262, NASA and Lockheed Martin, Alabama, Virginia, Texas, Louisiana, U.S.A (2015). https://ntrs.nasa.gov/api/citations/20150001262/downloads/20150001262.pdf

Emmens, W., van den Boogaard, A.: An overview of stabilizing deformation mechanisms in incremental sheet forming. J. Mater. Process. Technol. 209(8), 3688–3695 (2009). https://doi.org/10.1016/j.jmatprotec.2008.10.003CrossRef

Wong, C., Dean, T., Lin, J.: Incremental forming of solid cylindrical components using flow forming principles. J. Mater. Process. Technol. 153–154, 60–66 (2004). https://doi.org/10.1016/j.jmatprotec.2004.04.102CrossRef

Quigley, E., Monaghan, J.: Enhanced finite element models of metal spinning. J. Mater. Process. Technol. 121, 43–49 (2002). https://doi.org/10.1016/S0924-0136(01)01138-4CrossRef

Davey, K., Ward, M.J.: A practical method for finite element ring rolling simulation using the ALE ow formulation. Int. J. Mech. Sci. 44, 165–190 (2002). https://doi.org/10.1016/S0020-7403(01)00080-7CrossRef

Razavi, H., Biglari, F.R., Torabkhani, A.: Study of strains distribution in spinning process using FE simulation and experimental work. In: Tehran International Congress on Manufacturing Engineering (TICME2005) (2005). http://me1.aut.ac.ir/staff/manufacturing/biglari/pdf/2005-TICME-2-Study%20of%20Strains%20Distribution%20in.pdf

Wang, L.: Analysis of material deformation and wrinkling failure in conventional metal spinning process. Ph.D. thesis, Durham University, May 2012. http://etheses.dur.ac.uk/3537/1/PhD_Thesis_-_Final_-_May_2012.pdf?DDD10+

Kong, Q., Yu, Z., Zhao, Y., Wang, H., Lin, Z.: Theoretical prediction of flange wrinkling in first-pass conventional spinning of hemispherical part. J. Mater. Process. Technol. 246, 56–68 (2017). https://doi.org/10.1016/j.jmatprotec.2016.07.031CrossRef

10.

Li, Z., Zhan, M., Fan, X., Dong, Y., Xu, L.: Effect of blank quenching on shear spinning forming precision of 2219 aluminum alloy complex thin-walled components. Chin. J. Aeronaut. S1000936122002862 (2022). https://doi.org/10.1016/j.cja.2022.11.027

11.

Roula, A.M., Mocellin, K., Traphöner, H., Tekkaya, A.E., Bouchard, P.O.: Influence of mechanical characterization on the prediction of necking issues during sheet flow forming process. J. Mater. Process. Technol. 306, 117620 (2022). https://doi.org/10.1016/j.jmatprotec.2022.117620CrossRef

12.

Abaqus Documentation: User’s Manual Version 6.6. Dassault Systèmes Simulia, Inc. (2006)

13.

Gay, C., Montmitonnet, P., Coupez, T., Chenot, J.: Test of an element suitable for fully automatic remeshing in 3D elastoplastic simulation of cold forging. J. Mater. Process. Technol. 45(1–4), 683–688 (1994). https://doi.org/10.1016/0924-0136(94)90418-9CrossRef

Title: On the Relevance of Modeling Options in ABAQUS Regarding the Spinning Process Simulation
Authors: Akla-Essoh Claude Korolakina
Pierre-Olivier Bouchard
Katia Mocellin
Ahmed Mehdi Roula
Anne Lepied
Sjoerd Van der Veen
Publisher: Springer Nature Switzerland
Book: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity
Print ISBN: 978-3-031-41022-2

Electronic ISBN: 978-3-031-41023-9

Copyright Year: 2024
DOI: https://doi.org/10.1007/978-3-031-41023-9_67