Top

International Journal on Interactive Design and Manufacturing (IJIDeM)

28-01-2025 | Original Article

Optimal design of the geometrical parameters of biocomposite wraps using in repairing of corroded pipeline under internal pressure: application for Algerian MEDGAZ

Authors: Fouad Sodki Kara Achira, Abdelkader Hocine, Sidi Mohamed Medjdoub, Levent Aydin, Mohamed Houcine Dhaou

Published in: International Journal on Interactive Design and Manufacturing (IJIDeM)

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In accordance with the Design of Experiment (DOE), Multiple Nonlinear Regression Analysis (MNRA), and Stochastic Search approaches, the objective of this contribution is to optimize the geometric parameters of a multi-layer natural fiber-based composite wrap used for the repair of corroded pipelines, with the aim of replacing the conventional synthetic solution. The performance of the proposed natural fiber solution is examined by evaluating the Von Mises stresses (VMS), considering three geometric parameters of the composite wrap and their interactions: Length (Lp), Number of Plies (NPp), and Recovery Angle (RAp). To achieve this, 27 configurations were tested for each type of material. Two alternatives are used in the modeling part: Response Surface Methodology (RSM) and MNRA. The VMS responses, as predicted by MODDE and the Differential Evolution algorithm, are influenced by the geometric parameters and their interactions. Optimal reinforcements for the corroded zone volume of the pipe are proposed for each composite wrap. The results obtained show that in order to achieve the performance of a synthetic composite patch, the volume of the Jute/Epoxy and Palm/Epoxy patch biocomposites must be approximately 2.5 and 2.0 of the volume of the Glass/Epoxy, respectively.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Available only for authorised users

Hocine, A., Kara Achira, F.S., Habbar, G., Aydin, L., Medjdoub, S.M., Maizia, A., Dhaou, M.H., Bezazi, A.: Structural integrity assessment of corroded pipelines repaired with composite materials–Literature review. Int. J. Press. Vessels Pip. 210, 105253 (2024). https://doi.org/10.1016/j.ijpvp.2024.105253CrossRef

Baker M. Jr., Inc.: Mechanical Damage final report. Pipeline and Hazardous Materials Safety Administration Office of Pipeline Safety. Integrity Management Program. Under Delivery Order DTRS56-02-D-70036 (2009)

Bedairi, B., Cronin, D., Hosseini, A., Plumtree, A.: Failure prediction for Crack-in corrosion defects in natural gas transmission Pipelines. Int. J. Press. Vessel. Pip. (2012). https://doi.org/10.1016/j.ijpvp.2012.06.002CrossRef

El-Bagory, T.M., Sallam, H.E.M., Younan, M.: Evaluation of fracture toughness behavior of polyethylene pipe materials 1. J. Press. Vessel Technol. Trans. ASME 137(6), 061402 (2015). https://doi.org/10.1115/1.4029925CrossRef

Bouadjra, B.B., Abdelkader, M.: Optimization of the geometrical parameters of bonded composite wrap for repairing cracked pipelines. Frattura ed Integrità Strutturale 12(46), 102–112 (2018). https://doi.org/10.3221/IGF-ESIS.46.11CrossRefMATH

Fekih, M., Benmansour, S., Benmoussat, A.: Numerical simulation of localized corroded steel pipelines reinforced by composite sleeve. J. Sci. Technol. 2(1), 148 (2020)

Kec, J., Černý, I., Poloch, A., Kyselá, B., Poupa, M.: Oil transmission pipelines with corrosion defects reinforced by two types of sleeves: comparison efficiency of sleeves. In: ICSI 2021- The 4th International Conference on Structural Integrity- Procedia Structural Integrity, vol. 37, pp. 598–605 (2022). https://doi.org/10.1016/j.prostr.2022.01.128

Escoe, K.: Piping and pipeline assessment guide. 1st Edition - March 3, 2006 Elsevier. ISBN: 9780750678803

API, Recommended practice for fitness for service. API-579American Petrolum Institute, Washinton DC (2000)

10.

British Standards Institute, BS 7910. Guide on methods for assessing the acceptability of flaws in metallic structures, BSI-10 (2000)

11.

Arroussi, C., Mouna, A., Meliani, M.H., Pluvinage, G.: Proposal Engineering Methods to Repair/Replace Bend Elbow Pipe contain internal corrosion defect. Proc. Struct. Integr. 41, 752–758 (2022). https://doi.org/10.1016/j.prostr.2022.05.087CrossRef

12.

Zhang, Yu., Cheng, N., Cheng, Z., Luo, Q.: The debonding failure analysis of corroded pipes repaired with CFRP under tension and the bending moment. Int. J. Adhes. Adhes. 103, 102714 (2020). https://doi.org/10.1016/j.ijadhadh.2020.102714CrossRefMATH

13.

Benyahia, F., Albedah, A., Bachir Bouiadjra, B.: Stress intensity factor for repaired circumferential cracks in pipe with bonded composite wrap. J. Press. Vessel Technol. 136, 041201–041211 (2014). https://doi.org/10.1115/1.4026022CrossRef

14.

Achour, A., Albedah, A., Benyahia, A., Bachir Bouiadjra, B., Ouinas, D.: Analysis of repaired cracks with bonded composite wrap in pipes under bending. J. Press. Vessel Technol. 138, 060909–060916 (2016). https://doi.org/10.1115/1.40334498CrossRef

15.

Li, Z., Jiang, X., Hopman, H.: External surface cracked offshore pipes reinforced with composite repair system: a numerical analysis. Theor. Appl. Fract. Mech. 117, 103191 (2022). https://doi.org/10.1016/j.tafmec.2021.103191CrossRef

16.

Abd-Elhady, A.A., Sallam, H.E., Alarifi, I.M., Malik, R.A., El-Bagory, T.M.: Investigation of fatigue crack propagation in steel pipeline repaired by glass fiber reinforced polymer. Compos. Struct. 242, 112189 (2020). https://doi.org/10.1016/j.compstruct.2020.112189CrossRef

17.

Shamsuddoha, M., Manalo, A., Aravinthan, T., Islam, M.M., Djukic, L.: Failure analysis and design of grouted fibre-composite repair system for corroded steel pipes. Eng. Fail. Anal. 119, 104979 (2021). https://doi.org/10.1016/j.engfailanal.2020.104979CrossRef

18.

Muda, M.F., Hashim, M.H., Kamarudin, M.K., Mohd, M.H., Tafsirojjaman, T., Rahman, M.A., Paik, J.K.: Burst pressure strength of corroded subsea pipelines repaired with composite fiber-reinforced polymer patches. Eng. Fail. Anal. 136, 106204 (2022). https://doi.org/10.1016/j.engfailanal.2022.106204CrossRef

19.

Köpple, M.F., Lauterbach, S., Wagner, W.: Composite repair of through-wall defects in pipe work—analytical and numerical models with respect to ISO/TS 24817. Compos. Struct. 95, 173–178 (2013). https://doi.org/10.1016/j.compstruct.2012.06.023CrossRefMATH

20.

Shouman, A., Taheri, F.: An investigation into the behaviour of composite repaired pipelines under combined internal pressure and bending. In: Proceedings of the ASME 28th International Conference on Ocean, Offshore and Arctic Engineering, Honolulu, Hawaii. May 31–June 5, 2009. Paper No: OMAE2009-79177, pp. 111–118. https://doi.org/10.1115/OMAE2009-79177

21.

Shouman, A., Taheri, F.: Compressive strain limits of composite repaired pipelines under combined loading states. Compos. Struct. 93(6), 1538–1548 (2011). https://doi.org/10.1016/j.compstruct.2010.12.001CrossRefMATH

22.

Nourpanah, N., Taheri, F.: A design equation for evaluation of strain concentration factor in concrete coated X65 pipelines. Mar. Struct. 22(4), 758–769 (2009). https://doi.org/10.1016/j.marstruc.2009.07.001CrossRefMATH

23.

Abd-Elhady, A.A., Sallam, H.E., Mubaraki, M.A.: Failure analysis of composite repaired pipelines with an inclined crack under static internal pressure. Proc. Struct. Integr. 5, 123–130 (2017). https://doi.org/10.1016/j.prostr.2017.07.077CrossRef

24.

United States Environmental Protection Agency Air and Radiation (6202J) 1200 Pennsylvania Ave., NW Washington, DC 20460 (2006)

25.

Zhang, Y., Zhang, K., Zhao, H.K.: Stress analysis of adhesive in a cracked steel plate repaired with CFRP. J. Construct. Steel Res. 145, 210–217 (2018). https://doi.org/10.1016/j.jcsr.2018.02.029CrossRefMATH

26.

Duell, J.M., Wilson, J.M., Kessler, M.R.: Analysis of a carbon composite overwrap pipeline repair system. Int. J. Press. Vessels Pip. 85, 782–788 (2008). https://doi.org/10.1016/j.ijpvp.2008.08.001CrossRefMATH

27.

Hocine, A., Maizia, A., Ghouaoula, A., Dehmous, H.: Reliability prediction of composite tubular structure under mechanical loading by finite element method. J. Fail. Anal. Prevent. 18, 1439–1446 (2018). https://doi.org/10.1007/s11668-018-0536-zCrossRef

28.

Hocine, A., Ghouaoula, A., Achira, F.K., Medjdoub, S.M.: Analysis of failure pressures of composite cylinders with a polymer liner of type IV CNG vessels. Int. J. Mech. Aerosp. Ind. Mechatron. Eng. 7, 148–152 (2013)

29.

Bhardwaj, U., Teixeira, A.P., Guedes Soares, C.: Failure assessment of corroded ultra-high strength pipelines under combined axial tensile loads and internal pressure. Ocean Eng. 257, 111438 (2022). https://doi.org/10.1016/j.oceaneng.2022.111438CrossRefMATH

30.

Da Costa Mattos, H.S., Reis, J.M.L., Paima, L.M., Da Silva, M.L., Lopes Junior, R., Perrut, V.A.: Failure analysis of corroded pipelines reinforced with composite repair systems. J. Eng. Fail. Anal. 59, 223–236 (2016). https://doi.org/10.1016/j.engfailanal.2015.10.007CrossRef

31.

Zhang, J., Liang, Z., Han, C.J.: Effects of ellipsoidal corrosion defects on failure pressure of corroded pipelines based on finite element analysis. Int. J. Electrochem. Sci. 10, 5036–5047 (2015). https://doi.org/10.1016/S1452-3981(23)06684-1CrossRefMATH

32.

Achira, F.K., Medjdoub, S.M., Hocine, A., Dhaou, M.H., Chapelle, D.: Numerical analysis of the effect of the repair of corroded pipeline with composite patches on the prediction of failure pressure. Struct. Integr. Life 23(1), 15–22 (2023)

33.

Kere, K.J., Huang, Q.: Development of probabilistic failure pressure models for pipelines with single corrosion defect. Int. J. Press. Vessels Pip. 197, 104656 (2022). https://doi.org/10.1016/j.ijpvp.2022.104656CrossRefMATH

34.

Bhardwaj, U., Teixeira, A.P., Guedes Soares, C.: Probabilistic safety assessment of the burst strength of corroded pipelines of different steel grades with calibrated strength models. Mar. Struct. 86, 103310 (2022). https://doi.org/10.1016/j.marstruc.2022.103310CrossRefMATH

35.

Saeed, N., Kang, W.H., Samali, B.: Composite overwrap repair of pipelines-reliability based design framework. https://doi.org/10.1016/j.istruc.2022.04.029

36.

Garcia-Martin, R., Lopez-Rebollo, J., Sánchez-Aparicio, L.J., Fueyo, J.G., Pisonero, J., Gonzalez-Aguilera, D.: Digital image correlation and reliability-based methods for the design and repair of pressure pipes through composite solutions. Constr. Build. Mater. 248, 118625 (2020). https://doi.org/10.1016/j.conbuildmat.2020.118625CrossRef

37.

Habbar, G., Hocine, A., Maizia, A., Bezazi, A., Ribeiro, J., Dhaou, M.H., Bouledroua, O.: Failure analysis of biocomposite sandwich pipe under internal pressure—application for high pressure gas transportation pipelines MEDGAZ. Int. J. Press. Vessels Pip. 202, 104891 (2023). https://doi.org/10.1016/j.ijpvp.2023.104891CrossRef

38.

Habbar, G., Maizia, A., Hocine, A., Dhaou, M.H., João, R.: Micromechanical analysis of a bio-sandwich application for cylinder under pressure. Compos. Sci. (2022). https://doi.org/10.3390/jcs6030069CrossRefMATH

39.

CoDyre, L., Fam, A.: Axial strength of sandwich panels of different lengths with natural flax-fiber composite skins and different foam-core densities. J. Compos. Constr. 21(5), 04017042 (2017). https://doi.org/10.1061/(asce)cc.1943-5614.0000820CrossRef

40.

Savran, M., Aydin, L.: Chapter 14 - Material selection for hybrid natural fiber laminated composites in vibration using a stochastic optimization method. In: Khan, A., Rangappa, S.M., Siengchin, S., Jawaid, M., Asiri, A.M. (eds.) Woodhead Publishing Series in Composites Science and Engineering, Hybrid Natural Fiber Composites, pp. 281–307. Woodhead Publishing, Sawston (2021). https://doi.org/10.1016/B978-0-12-819900-8.00011-8CrossRef

41.

Savran, M., Aydin, L., Deveci, H.A., Gültürk, E.: Maximization of buckling resistance for lightweight vegetable based hybrid laminated composites combined with synthetic fibers. In: Jawaid, M., Khan, A. (eds.) Vegetable Fiber Composites and their Technological Applications. Composites Science and Technology, pp. 81–105. Springer, Singapore (2021). https://doi.org/10.1007/978-981-16-1854-3_4CrossRef

42.

Savran, M., Aydin, L.: Natural frequency and buckling optimization considering weight saving for hybrid graphite/epoxy-sitka spruce and graphite-flax/epoxy laminated composite plates using stochastic methods. Mech. Adv. Mater. Struct. 30(13), 2637–2650 (2023). https://doi.org/10.1080/15376494.2022.2061656CrossRef

43.

Ayvalik, A., Aydin, L.: Simultaneous analysis and optimum design of synthetic and vegetable fiber-reinforced composites for buckling—failure phenomena. Mech. Adv. Mater. Struct. 29(26), 5501–5510 (2022). https://doi.org/10.1080/15376494.2021.1958031CrossRefMATH

Title: Optimal design of the geometrical parameters of biocomposite wraps using in repairing of corroded pipeline under internal pressure: application for Algerian MEDGAZ
Authors: Fouad Sodki Kara Achira
Abdelkader Hocine
Sidi Mohamed Medjdoub
Levent Aydin
Mohamed Houcine Dhaou
Publication date: 28-01-2025
Publisher: Springer Paris
Published in: International Journal on Interactive Design and Manufacturing (IJIDeM)
Print ISSN: 1955-2513
Electronic ISSN: 1955-2505
DOI: https://doi.org/10.1007/s12008-024-02213-2

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"