Top

Published in:

2024 | OriginalPaper | Chapter

Optimization of Cutting Parameters in Face Milling of Waspaloy Superalloy

Authors : Oğuzhan Çakmakoğlu, Ahmet Demirer, Yakup Turgut, Ömer Seçgin

Published in: Green Approaches in Sustainable Aviation

Publisher: Springer Nature Switzerland

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The chapter delves into the optimization of cutting parameters for face milling Waspaloy superalloy, a material renowned for its high-temperature strength and corrosion resistance. Waspaloy is used in critical components of aircraft engines, but its high cost and difficult machining properties pose challenges. The study focuses on minimizing cutting forces, a key factor in reducing production costs and increasing efficiency. Using the Taguchi method, the authors experimentally determine the optimal cutting parameters, including cutting speed, feed rate, and cutting tool type. The results show that the GC 2030 cutting tool, a cutting speed of 20 m/min, and a feed rate of 0.1 mm/tooth yield the lowest cutting forces. The study also validates these findings through additional experiments, demonstrating the practical applicability of the optimized parameters. The chapter offers valuable insights into the machining of superalloys, contributing to the advancement of manufacturing techniques in high-performance materials.

AI Generated

This summary of the content was generated with the help of AI.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter MCDM Risk Assessment in Ground Operation

next chapter The Role of Additive Manufacturing Towards Sustainable Aerospace Structures

Akhyar Ibrahim, G., Che Haron, C. H., Abdul Ghani, J., Said, A. Y. M., & Abu Yazid, M. Z. (2011). Performance of PVD-coated carbide tools when turning inconel 718 in dry machining. Advances in Mechanical Engineering, 2011. available at: https://doi.org/10.1155/2011/790975

Alauddin, M., Mazid, M. A., El Baradi, M. A., & Hashmi, M. S. J. (1998). Cutting forces in the end milling of Inconel 718. Journal of Materials Processing Technology, 300(3–4), 153–159.CrossRef

Bagci, E., & Aykut, Ş. (2006). A study of Taguchi optimization method for identifying optimum surface roughness in CNC face milling of cobalt-based alloy (stellite 6). International Journal of Advanced Manufacturing Technology, 29(9–10), 940–947.CrossRef

Çiçek, A., Kıvak, T., Samtaş, G., Kivak, T., & Samtas, G. (2012). Application of Taguchi method for surface roughness and roundness error in drilling of AISI 316 stainless steel. Strojniški Vestnik – Journal of Mechanical Engineering, 58, 165–174.CrossRef

Dudzinski, D., Devillez, A., Moufki, A., Larrouquère, D., Zerrouki, V., & Vigneau, J. (2004). A review of developments towards dry and high speed machining of Inconel 718 alloy. International Journal of Machine Tools and Manufacture, 44(4), 439–456.CrossRef

Dutta, S., & Kumar Reddy Narala, S. (2021). Optimizing turning parameters in the machining of AM alloy using Taguchi methodology. Measurement: Journal of the International Measurement Confederation, Elsevier Ltd., 169, 108340.CrossRef

Ekici, E., & Uzun, G. (2022). Effects on machinability of cryogenic treatment applied to carbide tools in the milling of Ti6AI4V with optimization via the Taguchi method and grey relational analysis. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(7) Available at: https://doi.org/10.1007/s40430-022-03572-1

Ezugwu, E. O., Wang, Z. M., & Machado, A. R. (1998). The machinability of nickel-based alloys: A review. Journal of Materials Processing Technology, 86(1–3), 1–16.

Hoier, P., Klement, U., Tamil Alagan, N., Beno, T., & Wretland, A. (2017). Flank wear characteristics of WC-Co tools when turning Alloy 718 with high-pressure coolant supply. Journal of Manufacturing Processes, The Society of Manufacturing Engineers, 30, 116–123.CrossRef

Hoier, P., Malakizadi, A., Stuppa, P., Cedergren, S., & Klement, U. (2018). Microstructural characteristics of Alloy 718 and Waspaloy and their influence on flank wear during turning. Wear, Elsevier B.V., 400–401, 184–193.CrossRef

Isik, Y. (2017). Effect of Cutting Speed on the Pvd-Coated Carbide Insert in the Machining on Waspaloy. International Journal of Research in Engineering and Technology, 06(08), 48–52.CrossRef

Jawaid, A., Koksal, S., & Sharif, S. (2001). Cutting performance and wear characteristics of PVD coated and uncoated carbide tools in face milling Inconel 718 aerospace alloy. Journal of Materials Processing Technology, 116(1), 2–9.CrossRef

Köksal, S. (2000). Face milling of nickel-based superalloys with coated and uncoated carbide tools, No. October.

Mia, M. (2018). Mathematical modeling and optimization of MQL assisted end milling characteristics based on RSM and Taguchi method. Measurement. Elsevier Ltd. Available at: https://doi.org/10.1016/j.measurement.2018.02.017

Motorcu, A. R., Ekici, E., & Kuş, A. (2016). Investigation of the WEDM of Al/B4C/Gr reinforced hybrid composites using the Taguchi method and response surface methodology. Science and Engineering of Composite Materials, 23(4), 435–445.CrossRef

Olovsjö, S., Wretland, A., & Sjöberg, G. (2010). The effect of grain size and hardness of Waspaloy on the wear of cemented carbide tools. International Journal of Advanced Manufacturing Technology, 50(9–12), 907–915.CrossRef

Sandvik Coromant. (2010). Technical guide and product catalogues.

Şen, N., Taşdemir, V., & Seçgin, Ö. (2020). Investigation of formability of HC380LA material via the TPIF-RL incremental forming method. Ironmaking and Steelmaking, Taylor & Francis, 47(10), 1199–1205.CrossRef

Sharman, A., Dewes, R. C., & Aspinwall, D. K. (2001). Tool life when high speed ball nose end milling Inconel 718™. Journal of Materials Processing Technology, 118(1–3), 29–35.CrossRef

Thrinadh, J., Mohapatra, A., Datta, S., & Masanta, M. (2020). Machining behavior of Inconel 718 superalloy: Effects of cutting speed and depth of cut. Materials Today: Proceedings, Elsevier Ltd., 26, 200–208.

Veerappan, G., Ravichandran, M., & Marichamy, S. (2018). Mechanical properties and machinability of waspaloy for aerospace applications – Review. IOP Conference Series: Materials Science and Engineering, 402(1) Available at: https://doi.org/10.1088/1757-899X/402/1/012039

Velmurugan K, V., K, V., S, D. & Mathew, A. (2019). Investigation of parameters for machining a difficult-to-machine superalloy: Inconel X-750 and Waspaloy. Lecture Notes in Mechanical Engineering Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018), 199–215. Available at: https://doi.org/10.1007/978-981-13-2718-6_19

Yıldırım, Ç. V., Kıvak, T., Sarıkaya, M., & Erzincanlı, F. (2017). Determination of MQL parameters contributing to sustainable machining in the Milling of Nickel-Base Superalloy Waspaloy. Arabian Journal for Science and Engineering, 42(11), 4667–4681.CrossRef

Yıldırım, Ç. V., Kıvak, T., & Erzincanlı, F. (2019). Tool wear and surface roughness analysis in milling with ceramic tools of Waspaloy: a comparison of machining performance with different cooling methods. Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer Berlin Heidelberg, 41(2), 83.CrossRef

Title: Optimization of Cutting Parameters in Face Milling of Waspaloy Superalloy
Authors: Oğuzhan Çakmakoğlu
Ahmet Demirer
Yakup Turgut
Ömer Seçgin
Publisher: Springer Nature Switzerland
Book: Green Approaches in Sustainable Aviation
Print ISBN: 978-3-031-33117-6

Electronic ISBN: 978-3-031-33118-3

Copyright Year: 2024
DOI: https://doi.org/10.1007/978-3-031-33118-3_12

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"