Skip to main content
Top
Published in: Journal of Failure Analysis and Prevention 4/2016

01-08-2016 | Technical Article---Peer-Reviewed

Optimizing Concentration of Drag Reducing Polymer in Case of One- and Two-Phase Flow in 90° Copper Elbow

Authors: Mohamed Ahmed Fouad Mohamed Gaber, Tagreed Mohamed Zewail, Nieven Kamal Amine, Yehia Ahmed El-tawail

Published in: Journal of Failure Analysis and Prevention | Issue 4/2016

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The rate of diffusion-controlled corrosion of 90° Copper Elbow by acidified dichromate has been investigated in relation to the following parameters: effect of solution velocity in the absence and presence of drag reducing polymer in case of liquid, gas, and solid flows on the rate of diffusion-controlled corrosion. The result has been obtained according to those equations: k α v 0.44 in the absence of drag reducing polymer, k α v 0.33 in case of liquid–solid and the presence of drag reducing polymer, k α v 0.36 in case of liquid–gas and the presence of drag reducing polymer

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference M.G. Fontana, Corrosion engineering, 2nd edn. (McGraw Hill, New York, 1998) M.G. Fontana, Corrosion engineering, 2nd edn. (McGraw Hill, New York, 1998)
2.
go back to reference M. El-Gammal, H. Mazhar, J.S. Cotton, C. Shefski, J. Pietralik, C.Y. Ching, The hydrodynamic effects of single-phase flow on flow accelerated corrosion in a 90-degree elbow. Int. J. Nucl. Eng. Des. 240, 1589–1598 (2010)CrossRef M. El-Gammal, H. Mazhar, J.S. Cotton, C. Shefski, J. Pietralik, C.Y. Ching, The hydrodynamic effects of single-phase flow on flow accelerated corrosion in a 90-degree elbow. Int. J. Nucl. Eng. Des. 240, 1589–1598 (2010)CrossRef
3.
go back to reference B. Poulson, Complexities in predicting erosion corrosion. Int. J. Wear 200, 479–504 (1999) B. Poulson, Complexities in predicting erosion corrosion. Int. J. Wear 200, 479–504 (1999)
4.
go back to reference L.I. Xiao, L.U. Tao, Analysis of corrosion failure of petrochemical pipe elbow. Int. J. Nucl. Mater. 12, 119–123 (2005) L.I. Xiao, L.U. Tao, Analysis of corrosion failure of petrochemical pipe elbow. Int. J. Nucl. Mater. 12, 119–123 (2005)
5.
go back to reference W.H. Ahmed, Evaluation of the proximity effect on flow accelerated corrosion. Int. J. Ann. Nucl. Energy 37, 598–605 (2010)CrossRef W.H. Ahmed, Evaluation of the proximity effect on flow accelerated corrosion. Int. J. Ann. Nucl. Energy 37, 598–605 (2010)CrossRef
6.
go back to reference A. Whitea, Flow characteristics of complex soap systems. J. Non Newton. Fluid Mech. Nature 214, 585–586 (1967) A. Whitea, Flow characteristics of complex soap systems. J. Non Newton. Fluid Mech. Nature 214, 585–586 (1967)
7.
go back to reference J.G. Savins, A stress-controlled drag-reduction phenomenon. J. Non Newton. Fluid Mech. Acta 6, 323–367 (1967) J.G. Savins, A stress-controlled drag-reduction phenomenon. J. Non Newton. Fluid Mech. Acta 6, 323–367 (1967)
8.
go back to reference B. Lu, X. Li, J.L. Zakin, Y. Talmon, A non-viscoelastic drag reducing cationic surfactant system. J. Non Newton. Fluid Mech. 71, 59–72 (1997)CrossRef B. Lu, X. Li, J.L. Zakin, Y. Talmon, A non-viscoelastic drag reducing cationic surfactant system. J. Non Newton. Fluid Mech. 71, 59–72 (1997)CrossRef
9.
go back to reference G.H. Jeffery, J. Bassett, R.C. Denney, Vogles, 5th edn. (Longman, New York, 1989) G.H. Jeffery, J. Bassett, R.C. Denney, Vogles, 5th edn. (Longman, New York, 1989)
10.
go back to reference M.H. Abdel-Aziz, I.A.S. Mansour, G.H. Sedahmed, Study of the rate of liquid–solid mass transfer controlled processes in helical tubes under turbulent flow conditions. Int. J. Chem. Eng. Process. 49, 643–648 (2010)CrossRef M.H. Abdel-Aziz, I.A.S. Mansour, G.H. Sedahmed, Study of the rate of liquid–solid mass transfer controlled processes in helical tubes under turbulent flow conditions. Int. J. Chem. Eng. Process. 49, 643–648 (2010)CrossRef
11.
go back to reference G.H. Sedahmed, M.S.E. Abdo, M. Amer, G. Abdelatif, Mass transfer at a pipe inlet zone in relation to impingement corrosion. Int. J. Heat Mass Transf. 25, 443–451 (1998)CrossRef G.H. Sedahmed, M.S.E. Abdo, M. Amer, G. Abdelatif, Mass transfer at a pipe inlet zone in relation to impingement corrosion. Int. J. Heat Mass Transf. 25, 443–451 (1998)CrossRef
12.
go back to reference C. Deslouis, I. Epelboin, B. Tnbollet, L. Viet, Flow of complex fluids past confined cylinders from macro to micro scale. Europhys. J. Non Newton. Fluid Mech. 52, 100–106 (1980) C. Deslouis, I. Epelboin, B. Tnbollet, L. Viet, Flow of complex fluids past confined cylinders from macro to micro scale. Europhys. J. Non Newton. Fluid Mech. 52, 100–106 (1980)
13.
go back to reference N.I. Pecherkin, VYu. Chekhovich, Mass transfer in a two phase flow in curvilinear channel. J. Eng. Thermo-phys. 17, 113–119 (2008)CrossRef N.I. Pecherkin, VYu. Chekhovich, Mass transfer in a two phase flow in curvilinear channel. J. Eng. Thermo-phys. 17, 113–119 (2008)CrossRef
14.
go back to reference B. Poulson, R. Robinson, The use of a corrosion process to obtain mass transfer data. Corros. Sci. 26, 265–280 (1986)CrossRef B. Poulson, R. Robinson, The use of a corrosion process to obtain mass transfer data. Corros. Sci. 26, 265–280 (1986)CrossRef
15.
go back to reference S. Zhou, M.M. Stack, R.C. Newman, Characterization of synergistic effects between erosion and corrosion in an aqueous environment using electrochemical techniques. Corros. Sci. 52, 930–934 (1996) S. Zhou, M.M. Stack, R.C. Newman, Characterization of synergistic effects between erosion and corrosion in an aqueous environment using electrochemical techniques. Corros. Sci. 52, 930–934 (1996)
16.
go back to reference K. Yuki, S. Hasegawa, T. Sato, H. Hashizume, K. Aizawa, H. Yamano, Matched refractive-index PIV visualization of complex flow structure in a three-dimensionally connected dual elbow. Nucl. Eng. Des. 241, 4544–4550 (2011)CrossRef K. Yuki, S. Hasegawa, T. Sato, H. Hashizume, K. Aizawa, H. Yamano, Matched refractive-index PIV visualization of complex flow structure in a three-dimensionally connected dual elbow. Nucl. Eng. Des. 241, 4544–4550 (2011)CrossRef
Metadata
Title
Optimizing Concentration of Drag Reducing Polymer in Case of One- and Two-Phase Flow in 90° Copper Elbow
Authors
Mohamed Ahmed Fouad Mohamed Gaber
Tagreed Mohamed Zewail
Nieven Kamal Amine
Yehia Ahmed El-tawail
Publication date
01-08-2016
Publisher
Springer US
Published in
Journal of Failure Analysis and Prevention / Issue 4/2016
Print ISSN: 1547-7029
Electronic ISSN: 1864-1245
DOI
https://doi.org/10.1007/s11668-016-0134-x

Other articles of this Issue 4/2016

Journal of Failure Analysis and Prevention 4/2016 Go to the issue

Calendar

Events

Case History---Peer-Reviewed

Lamellar Tearing: A Failure Case Study

Case History---Peer-Reviewed

Fracture of Hex Bars During Manufacture

Premium Partners