Skip to main content
Top

2020 | OriginalPaper | Chapter

Performance of a Carburizing Bearing Steel After Surface Nanosized

Authors : Yanhui Wang, Fucheng Zhang, Zhinan Yang, Hezong Li, Qian Yang

Published in: Proceedings of the Third International Conference on Theoretical, Applied and Experimental Mechanics

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Nanobainite and dispersed carbides were gained on surface layer of a modified carburizing 23Cr2Ni2Si1Mo bainitic bearing steel based on carburization, tempering at high temperature, and succedent low-temperature isothermal quenching. As compared with the conventional carburizing 20Cr2Ni4 martensitic bearing steel, the novel carburizing 23Cr2Ni2Si1Mo nanobainitic bearing steel showed a much higher wear-resisting performance and rolling contact fatigue performance. The excellent properties suggest that the novel carburizing 23Cr2Ni2Si1Mo nanostructured bainitic steel is very promising to manufacture heavy-duty bearing, especially for bearings that bear impact load and need high wear-resisting performance and high rolling contact fatigue performance during their service life.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Bhadeshia, H.K.D.H.: Nanostructured bainite. Proc. R. Soc. A 466, 3–18 (2010)CrossRef Bhadeshia, H.K.D.H.: Nanostructured bainite. Proc. R. Soc. A 466, 3–18 (2010)CrossRef
2.
go back to reference Yoozbashi, M.N., Yazdani, S., Wang, T.S.: Design of a new nanostructured, high-Si bainitic steel with lower cost production. Mater. Des. 32, 3248–3253 (2011)CrossRef Yoozbashi, M.N., Yazdani, S., Wang, T.S.: Design of a new nanostructured, high-Si bainitic steel with lower cost production. Mater. Des. 32, 3248–3253 (2011)CrossRef
3.
go back to reference Hasan, H.S., Peet, M.J., Avettand-Fènoël, M.-N., et al.: Effect of tempering upon the tensile properties of a nanostructured bainitic steel. Mater. Sci. Eng. A 615, 340–347 (2014)CrossRef Hasan, H.S., Peet, M.J., Avettand-Fènoël, M.-N., et al.: Effect of tempering upon the tensile properties of a nanostructured bainitic steel. Mater. Sci. Eng. A 615, 340–347 (2014)CrossRef
4.
go back to reference Amel-Farzad, H., Faridi, H.R., Rajabpour, F., et al.: Developing very hard nanostructured bainitic steel. Mater. Sci. Eng. A 559, 68–73 (2013)CrossRef Amel-Farzad, H., Faridi, H.R., Rajabpour, F., et al.: Developing very hard nanostructured bainitic steel. Mater. Sci. Eng. A 559, 68–73 (2013)CrossRef
5.
go back to reference Yang, J., Wang, T.S., Zhang, B., et al.: Sliding wear resistance and worn surface microstructure of nanostructured bainitic steel. Wear 282–283, 81–84 (2012)CrossRef Yang, J., Wang, T.S., Zhang, B., et al.: Sliding wear resistance and worn surface microstructure of nanostructured bainitic steel. Wear 282–283, 81–84 (2012)CrossRef
6.
go back to reference Liu, H.J., Sun, J.J., Jiang, T., et al.: Improved rolling contact fatigue life for an ultrahigh-carbon steel with nanobainitic microstructure. Scr. Mater. 90–91, 17–20 (2014)CrossRef Liu, H.J., Sun, J.J., Jiang, T., et al.: Improved rolling contact fatigue life for an ultrahigh-carbon steel with nanobainitic microstructure. Scr. Mater. 90–91, 17–20 (2014)CrossRef
7.
go back to reference Wang, Y.H., Yang, Z.N., Zhang, F.C., et al.: Microstructures and mechanical properties of surface and center of carburizing 23Cr2Ni2Si1Mo steel subjected to low-temperature austempering. Mater. Sci. Eng. A 670, 166–177 (2016)CrossRef Wang, Y.H., Yang, Z.N., Zhang, F.C., et al.: Microstructures and mechanical properties of surface and center of carburizing 23Cr2Ni2Si1Mo steel subjected to low-temperature austempering. Mater. Sci. Eng. A 670, 166–177 (2016)CrossRef
8.
go back to reference Chakraborty, J., Bhattacharjee, D., Manna, I.: Development of ultrafine bainite + martensite duplex microstructure in SAE 52100 bearing steel by prior cold deformation. Scr. Mater. 61, 604–607 (2009)CrossRef Chakraborty, J., Bhattacharjee, D., Manna, I.: Development of ultrafine bainite + martensite duplex microstructure in SAE 52100 bearing steel by prior cold deformation. Scr. Mater. 61, 604–607 (2009)CrossRef
9.
go back to reference Zheng, C.L., Dan, R., Zhang, F.C., et al.: Effects of retained austenite and hydrogen on the rolling contact fatigue behaviours of carbide-free bainitic steel. Mater. Sci. Eng. A 594, 364–371 (2014)CrossRef Zheng, C.L., Dan, R., Zhang, F.C., et al.: Effects of retained austenite and hydrogen on the rolling contact fatigue behaviours of carbide-free bainitic steel. Mater. Sci. Eng. A 594, 364–371 (2014)CrossRef
10.
go back to reference Wang, Y.H., Zhang, F.C., Yang, Z.N., et al.: Rolling contact fatigue performances of carburized and high-C nanostructured bainitic steels. Materials 9, 960 (2016)CrossRef Wang, Y.H., Zhang, F.C., Yang, Z.N., et al.: Rolling contact fatigue performances of carburized and high-C nanostructured bainitic steels. Materials 9, 960 (2016)CrossRef
11.
go back to reference Bhadeshia, H.K.D.H.: Steels for bearings. Prog. Mater. Sci. 57, 268–435 (2012)CrossRef Bhadeshia, H.K.D.H.: Steels for bearings. Prog. Mater. Sci. 57, 268–435 (2012)CrossRef
12.
go back to reference Wang, T.S., Yang, J., Shang, C.J., et al.: Sliding friction surface microstructure and wear resistance of 9SiCr steel with low-temperature austempering treatment. Surf. Coat. Technol. 202, 4036–4040 (2008)CrossRef Wang, T.S., Yang, J., Shang, C.J., et al.: Sliding friction surface microstructure and wear resistance of 9SiCr steel with low-temperature austempering treatment. Surf. Coat. Technol. 202, 4036–4040 (2008)CrossRef
Metadata
Title
Performance of a Carburizing Bearing Steel After Surface Nanosized
Authors
Yanhui Wang
Fucheng Zhang
Zhinan Yang
Hezong Li
Qian Yang
Copyright Year
2020
DOI
https://doi.org/10.1007/978-3-030-47883-4_9

Premium Partners