Skip to main content
Top
Published in: Chinese Journal of Mechanical Engineering 6/2017

01-11-2017 | Original Article

Phase-Division-Based Dynamic Optimization of Linkages for Drawing Servo Presses

Authors: Zhi-Gang Zhang, Li-Ping Wang, Yan-Ke Cao

Published in: Chinese Journal of Mechanical Engineering | Issue 6/2017

Login to get access

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Existing linkage-optimization methods are designed for mechanical presses; few can be directly used for servo presses, so development of the servo press is limited. Based on the complementarity of linkage optimization and motion planning, a phase-division-based linkage-optimization model for a drawing servo press is established. Considering the motion-planning principles of a drawing servo press, and taking account of work rating and efficiency, the constraints of the optimization model are constructed. Linkage is optimized in two modes: use of either constant eccentric speed or constant slide speed in the work segments. The performances of optimized linkages are compared with those of a mature linkage SL4-2000A, which is optimized by a traditional method. The results show that the work rating of a drawing servo press equipped with linkages optimized by this new method improved and the root-mean-square torque of the servo motors is reduced by more than 10%. This research provides a promising method for designing energy-saving drawing servo presses with high work ratings.
Literature
1.
go back to reference D Y He. Crank press. Beijing: China Machine Press, 1987. (in Chinese). D Y He. Crank press. Beijing: China Machine Press, 1987. (in Chinese).
2.
go back to reference K Osakada, K Mori, T Altan, et al. Mechanical servo press technology for metal forming. CIRP Annals-Manufacturing Technology, 2011, 60: 651–672. K Osakada, K Mori, T Altan, et al. Mechanical servo press technology for metal forming. CIRP Annals-Manufacturing Technology, 2011, 60: 651–672.
3.
go back to reference Y Xu. Kinematics simulation and optimized design of seven-1ink mechanism of double crank press based on ADAMS. Journal of Chongqing Technology and Business (Natural Sciences Edition), 2010, 27(5): 509–512. (in Chinese). Y Xu. Kinematics simulation and optimized design of seven-1ink mechanism of double crank press based on ADAMS. Journal of Chongqing Technology and Business (Natural Sciences Edition), 2010, 27(5): 509–512. (in Chinese).
4.
go back to reference H Li, C Zhang, Y M Song. Dynamic formulation and simulation of the programmable press. Journal of Mechanical Engineering, 2005, 41(3): 180–184. (in Chinese). H Li, C Zhang, Y M Song. Dynamic formulation and simulation of the programmable press. Journal of Mechanical Engineering, 2005, 41(3): 180–184. (in Chinese).
5.
go back to reference J X Qu, Q X Xia, X B Long, et al. Research development on the main drive system and control technologies of servo press. Forging and Stamping Technology, 2014, 39(10): 89–97. (in Chinese). J X Qu, Q X Xia, X B Long, et al. Research development on the main drive system and control technologies of servo press. Forging and Stamping Technology, 2014, 39(10): 89–97. (in Chinese).
6.
go back to reference Y Fang, Y S Sun, J G Hu, et al. Research on kinematics/dynamics simulation of servo-press transmission mechanism based on MATLAB. China Mechanical Engineering, 2012, 23(3): 339–342. (in Chinese). Y Fang, Y S Sun, J G Hu, et al. Research on kinematics/dynamics simulation of servo-press transmission mechanism based on MATLAB. China Mechanical Engineering, 2012, 23(3): 339–342. (in Chinese).
7.
go back to reference J He, F Gao, Y J Bai, et al. Dynamic modeling and experiment of a new type of parallel servo press considering gravity counterbalance. Chinese Journal of Mechanical Engineering, 2013, 26(6): 1222–1233. J He, F Gao, Y J Bai, et al. Dynamic modeling and experiment of a new type of parallel servo press considering gravity counterbalance. Chinese Journal of Mechanical Engineering, 2013, 26(6): 1222–1233.
8.
go back to reference J Xie, S D Zhao, Z H Sha, et al. Position servo control of the slider in double toggle mechanical press using Bezier curve model and fuzzy control. IEEE International Conference on Automation Science and Engineering, Trieste, 2011: 773–778. J Xie, S D Zhao, Z H Sha, et al. Position servo control of the slider in double toggle mechanical press using Bezier curve model and fuzzy control. IEEE International Conference on Automation Science and Engineering, Trieste, 2011: 773–778.
9.
go back to reference K Osakada. Application of servo presses to metal forming processes. Steel Research International, 2010, 81(9): 9–16. K Osakada. Application of servo presses to metal forming processes. Steel Research International, 2010, 81(9): 9–16.
10.
go back to reference Y J Bai, F Gao, W Z Guo. Design of mechanical presses driven by multi-servomotor. Journal of Mechanical Science & Technology, 2011, 25(9): 2323–2334. Y J Bai, F Gao, W Z Guo. Design of mechanical presses driven by multi-servomotor. Journal of Mechanical Science & Technology, 2011, 25(9): 2323–2334.
11.
go back to reference W Z Guo, F Gao. Design of a servo mechanical press with redundant actuation. Chinese Journal of Mechanical Engineering, 2009, 22(4): 574–579. W Z Guo, F Gao. Design of a servo mechanical press with redundant actuation. Chinese Journal of Mechanical Engineering, 2009, 22(4): 574–579.
12.
go back to reference F Meoni, M Carricato. Design of non-overconstraine energy-efficient multi-axis servo presses for deep-drawing applications. Journal of Mechanical Design, 2016, 138(6): 065001-1–9. F Meoni, M Carricato. Design of non-overconstraine energy-efficient multi-axis servo presses for deep-drawing applications. Journal of Mechanical Design, 2016, 138(6): 065001-1–9.
13.
go back to reference T H Chu, K H Fuh, W C Yeh. Modelling and analysis of deep drawing with utilisation of vibrations and servo press using response surface methodology. Material Research Innovations, 2015, 18(S2): S2-936–S2-939. T H Chu, K H Fuh, W C Yeh. Modelling and analysis of deep drawing with utilisation of vibrations and servo press using response surface methodology. Material Research Innovations, 2015, 18(S2): S2-936–S2-939.
14.
go back to reference Q Y Song, B F Guo, J Li. Drawing motion profile planning and optimizing for heavy servo press. The International Journal of Advanced Manufacturing Technology, 2013, 69(9): 2819–2831. Q Y Song, B F Guo, J Li. Drawing motion profile planning and optimizing for heavy servo press. The International Journal of Advanced Manufacturing Technology, 2013, 69(9): 2819–2831.
15.
go back to reference Y H Zhou, F G Xie, X J Liu. Type synthesis and optimization of main driving mechanism for servo-punch press. Journal of Mechanical Engineering, 2015, 51(11): 1–7. (in Chinese). Y H Zhou, F G Xie, X J Liu. Type synthesis and optimization of main driving mechanism for servo-punch press. Journal of Mechanical Engineering, 2015, 51(11): 1–7. (in Chinese).
16.
go back to reference Y H Zhou, F G Xie, X J Liu. Optimal design of a main driving mechanism for servo punch press based on performance atlases. Chinese Journal of Mechanical Engineering, 2013, 26(5): 909–917. Y H Zhou, F G Xie, X J Liu. Optimal design of a main driving mechanism for servo punch press based on performance atlases. Chinese Journal of Mechanical Engineering, 2013, 26(5): 909–917.
17.
go back to reference D Mundo, G A Danieli, H S Yan. Kinematic optimization of mechanical presses by optimal synthesis of cam-integrated linkages. Transactions of the Canadian Society for Mechanical Engineering, 2006, 30(4): 519–532. D Mundo, G A Danieli, H S Yan. Kinematic optimization of mechanical presses by optimal synthesis of cam-integrated linkages. Transactions of the Canadian Society for Mechanical Engineering, 2006, 30(4): 519–532.
18.
go back to reference R X Du, W Z Guo. The design of a new metal forming press with controllable mechanism. Journal of Mechanical Design, 2003, 125(3): 582–592. R X Du, W Z Guo. The design of a new metal forming press with controllable mechanism. Journal of Mechanical Design, 2003, 125(3): 582–592.
19.
go back to reference P L Tso, K C Liang. A nine-bar linkage for mechanical forming presses. International Journal of Machine Tools & Manufacture, 2002, 42(1): 139–145. P L Tso, K C Liang. A nine-bar linkage for mechanical forming presses. International Journal of Machine Tools & Manufacture, 2002, 42(1): 139–145.
20.
go back to reference P Groche, M Scheitza, M Kraft, et al. Increased total flexibility by 3D servo presses. CIRP Annals - Manufacturing Technology, 2010, 59(1): 267–270. P Groche, M Scheitza, M Kraft, et al. Increased total flexibility by 3D servo presses. CIRP Annals - Manufacturing Technology, 2010, 59(1): 267–270.
21.
go back to reference R Matsumoto, S Sawa, H Utsunomiya, et al. Prevention of galling in forming of deep hole with retreat and advance pulse ram motion on servo press. CIRP Annals - Manufacturing Technology, 2011, 60(1): 315–318. R Matsumoto, S Sawa, H Utsunomiya, et al. Prevention of galling in forming of deep hole with retreat and advance pulse ram motion on servo press. CIRP Annals - Manufacturing Technology, 2011, 60(1): 315–318.
22.
go back to reference W Q Chen, D H Huo, W K Xie, et al. Integrated simulation method for interaction between manufacturing process and machine tool. Chinese Journal of Mechanical Engineering, 2016, 29(6): 1090–1095. W Q Chen, D H Huo, W K Xie, et al. Integrated simulation method for interaction between manufacturing process and machine tool. Chinese Journal of Mechanical Engineering, 2016, 29(6): 1090–1095.
23.
go back to reference S D Shen. Practical theory of mechanisms. Beijing: China Textile Industry Press, 1997. (in Chinese). S D Shen. Practical theory of mechanisms. Beijing: China Textile Industry Press, 1997. (in Chinese).
24.
go back to reference R L Norton. Design of machinery an introduction to the synthesis and analysis of mechanisms and machines. Beijing: China Machine Press, 2003. (in Chinese). R L Norton. Design of machinery an introduction to the synthesis and analysis of mechanisms and machines. Beijing: China Machine Press, 2003. (in Chinese).
25.
go back to reference Y N Ji, R H Zhang, H H Miu, et al. A study of the mechanized presser simulation movement and the curve movement of slides based on Adams six linkage. Agriculture Equipment & Technology, 2013, 39(6): 15–17. Y N Ji, R H Zhang, H H Miu, et al. A study of the mechanized presser simulation movement and the curve movement of slides based on Adams six linkage. Agriculture Equipment & Technology, 2013, 39(6): 15–17.
26.
go back to reference X D Chen. Optimization design of mechanical press machine six-link mechanism based on Adams. Mechanical Drive, 2016, 40(6): 97–105. (in Chinese). X D Chen. Optimization design of mechanical press machine six-link mechanism based on Adams. Mechanical Drive, 2016, 40(6): 97–105. (in Chinese).
Metadata
Title
Phase-Division-Based Dynamic Optimization of Linkages for Drawing Servo Presses
Authors
Zhi-Gang Zhang
Li-Ping Wang
Yan-Ke Cao
Publication date
01-11-2017
Publisher
Chinese Mechanical Engineering Society
Published in
Chinese Journal of Mechanical Engineering / Issue 6/2017
Print ISSN: 1000-9345
Electronic ISSN: 2192-8258
DOI
https://doi.org/10.1007/s10033-017-0195-0

Other articles of this Issue 6/2017

Chinese Journal of Mechanical Engineering 6/2017 Go to the issue

Premium Partners