Top

Published in:

2018 | Supplement | Chapter

Physico-mechanical, Morphological, and Thermal Properties of Clay Dispersed Styrene-co-Maleic Acid Impregnated Wood Polymer Nanocomposites

Authors : M. R. Rahman, S. Hamdan, J. C. H. Lai

Published in: Wood Polymer Nanocomposites

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In this study, we evaluate the physical, mechanical, and morphological properties of a clay dispersed styrene-co-glycidyl methacrylate (ST-co-GMA) impregnated wood polymer nanocomposite (WPNC). The WPNC was characterized by Fourier Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscopy (SEM), 3-point bending, and free-vibration testing. The FT-IR results showed that the absorbance at 1730 cm⁻¹ was increased for ST-co-GMA-clay-WPNC compared with other nanocomposites and the raw material. The SEM results showed that ST-co-GMA-clay-WPNC had a smoother surface than other nanocomposites and raw wood. The modulus of elasticity (MOE), modulus of rupture (MOR), and dynamic Young’s moduli (Ed) of WPNCs were considerably increased compared to wood polymer nanocomposites (WPNCs) and raw wood. The raw wood exhibited a higher water uptake (WU) than WPNCs.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Clay Dispersed Styrene-co-glycidyl Methacrylate Impregnated Kumpang Wood Polymer Nanocomposites: Impact on Mechanical and Morphological Properties

next chapter Preparation and Characterizations of Clay-Dispersed Styrene-co-Ethylene Glycol Dimethacrylate-Impregnated Wood Polymer Nanocomposites

Alexandre M, Dubois P (2000) Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials. Mater Sci Eng, R 28(1):1–63CrossRef

Bodirlau R, Teaca CA (2009) Fourier transform infrared spectroscopy and thermal analysis of lignocellulosic fillers treated with organic anhydrides. Romanian Rep Phy 54(1–2):93–104

Cai X, Riedl B, Zhang SY, Wan H (2008) The impact of interphase between wood, melamine-urea-formaldehyde and layered silicate on the performance of wood polymer nanocomposites. Compos Part A 39:727–737CrossRef

Chen JS, Poliks MD, Ober CK, Zhang Y, Wiesner U, Giannelis E (2002) Study of the interlayer expansion mechanism and thermal-mechanical properties of surface-initiated epoxy nanocomposites. Polym 43(18):4895–4904CrossRef

Chen T, Wu Z, Niu M, Xie Y, Wang X (2016) Effect of Si-Al molar ratio on microstructure and mechanical properties of ultra-low density fiberboard. Eur J Wood Wood Prod 74(2):151–160CrossRef

Chowdary MS, Niranjan MSR (2015) Effect of nanoclay on the mechanical properties of polyester and S-glass fiber (Al). Int J Adv Sci Technol 47:35–42CrossRef

Devi RR, Maji TK (2007) Effect of glycidyl methacrylate on the physical properties of wood polymer composites. Polym Compos 28(1):1–5CrossRef

Fan M, Ndikontar MK, Zhou X, Ngamveng JN (2012) Cement-bonded composites made from tropical wood: compatibility of wood and cement. Const Build Mater 36:135–140CrossRef

Garcia M, Garmendia HI, Garcia-Jaca J (2009) Wood-plastics composites with better fire retardancy and durability performance. Compos Part A 40(11):1772–1776CrossRef

Greil P, Lifka T, Kaindl A (1998) Biomorphic cellular silicon carbide ceramics from wood: II. Mechanical properties. J Eur Ceram Soc 18(14):1975–1983CrossRef

Haraguchi K, Li HJ, Matsuda K, Takeisa T, Elliott E (2005) Mechanism of forming organic/inorganic network structures during in-situ free-radical polymerization in PNIPA-clay nanocomposite hydrogels. Macromol 38(8):3482–3490CrossRef

Hazarika A, Deka BK, Maji TK (2015) Melamine-formaldehyde acrylamide and gum polymer impregnated wood polymer nanocomposite. J Bio Eng 12(2):304–315CrossRef

Hill CAS, Cetin NS, Quinney H, Ewen RJ (2001) An investigation of the potential for chemical modification and subsequent polymeric grafting as a means of protecting wood against photodegradation. Polym Degrad Stabil 72(1):133–139CrossRef

Islam MS, Hamdan S, Hasan M, Ahmed AS, Rahman MR (2012) Effect of coupling reactions on the mechanical and biological properties of tropical wood polymer composites (WPC). Int Biodeter Biodegrad 72:108–113CrossRef

Jeon IY, Baek JB (2010) Nanocomposites derived from polymers and inorganic nanoparticles. Mater 3(6):3654–3674CrossRef

Kamei I, Hirota Y, Meguro S (2012) Integrated delignification and simultaneous saccharification and fermentation of hardwood by a white-rot fungus, Phlebia sp. MG-60. Biores Technol 126:137–141CrossRef

Kartal SN, Yoshimura T, Inamura Y (2004) Decat and termite resistance of boron-treated and chemically modified wood by in situ co-polymerization of allyl glycidyl ether (AGE) with methyl methacrylate (MMA). Int Biodeter Biodegrad 53(2):111–117CrossRef

Kim HS, Kim S, Kim HJ, Yang HS (2006) Thermal properties of bio-flour-filled polyolefin composites with different compatibilizing agent type and content. Thermochim Acta 451(1–2):181–188CrossRef

Kim HS, Lee BH, Choi SW, Kim S, Kim HJ (2007) The effect of types of maleic anhydride-grafted polypropylene (MAPP) on the interfacial adhesion properties of bio-flour-filled polypropylene composites. Compos Part A 38(6):1473–1482CrossRef

Kondo T, Sawatari C (1996) A Fourier transform infra-red spectroscopic analysis of the character of hydrogen bonds in amorphous cellulose. Polym 37(3):393–399CrossRef

Krestchmann DE (2010) Mechanical properties of wood. Wood Handbook-Wood as an engineering material. Forest Products Laboratory, United States, pp 1–46

Li YF, Liu YX, Wang XM, Wu QL, Yu HP, Li J (2011) Wood polymer composites prepared by the in situ polymerization of monomers within wood. J Appl Polym Sci 119(6):3207–3216CrossRef

Li Y, Liu Z, Dong X, Fu Y, Liu Y (2013) Comparison of decay resistance of wood and wood polymer composite prepared by in-situ polymerization of monomers. Int Biodeter Biodegrad 84:401–406CrossRef

Liu Z, Jiang Z, Fei B, Liu X (2013) Thermal decomposition characteristic of chinese fir. BioRes 8(4):5014–5024

Liu R, Sun W, Cao J, Wang J (2016) Surface properties of in situ organo-montmorillonite modified wood flour and the influence on mechanical properties of composites with polypropylene. Appl Surf Sci 361:234–241CrossRef

Lopes MA, Silva RF, Monteiro FJ, Santos JD (2000) Microstructural dependence of Young’s and shear moduli of P₂O₅ glass reinforced hydroxyapatite for biomedical applications. Biomater 21(7):749–754CrossRef

Malkapuran R, Kumar V, Negi YS (2008) Recent development in natural fiber reinforced polypropylene composites. J Reinf Plast Compos 28(10):1169–1189CrossRef

Ndiaye D, Tidjani A (2012) Effects of coupling agents on thermal behavior and mechanical properties of wood flour/polypropylene composites. J Compos Mater 46(24):3067–3075CrossRef

Pandey KK (2005) Study of the effect of photo-irritation on the surface chemistry of wood. Polym Degrad Stabil 90(1):9–20CrossRef

Parker RW, Frost RI (1996) The application of drift spectroscopy to the multicomponent analysis of organic chemicals adsorbed on montmorillonite. Clay Miner 44(1):32–40CrossRef

Pawar PM, Koutaniemi S, Tenkanen M, Mellerowicz EJ (2013) Acetylation of woody lignocellulosic: significance and regulation. Front Plant Sci 21(4):118

Popescu MC, Froidevaux J, Navi P, Popescu CM (2013) Structural modifications of Tilia cordata wood during heat treatment investigated by FT-IR and 2D IR correlation spectroscopy. J Mol Struct 1033:176–186CrossRef

Rahman MR, Hamdan S, Islam MS (2010) Mechanical and biological performance of sodium metaperiodate-impregnated plasticized wood (pw). BioRes 5(2):1022–1035

Rahman RM, Hamdan S, Ahmed AS, Islam MS, Talib ZA, Abdullah WFW, Che Mat MS (2011) Thermogravimetric analysis and dynamic Young’s modulus measurement of N,N-dimethylacetamide-impregnated wood polymer composites. J Vinyl Addit Technol 17(3):177–183CrossRef

Rahman MR, Hamdan S, Hashim DMA, Islam MS, Takagi H (2014) Bamboo fiber polypropylene composites: Effect of fiber treatment and nanoclay on mechanical and thermal properties. J Vinyl Addit Technol 21(4):253–258CrossRef

Rath J, Wolfinger MG, Steiner G, Krammer G, Barontini F, Cozzani V (2003) Heat of wood pyrolysis. Fuel 82(1):81–91CrossRef

Rowell RM (2006) Chemical modification of wood: a short review. Wood Mater Sci Eng 1:29–33CrossRef

Sanchez-Jimenez PE, Perez-Maqueda LA, Crespo-Amoros JE, Lopez J, Perejon A, Criado JM (2012) Nanoclay nucleation effect in the thermal stabilization of a polymer nanocomposite: a kinetic mechanism change. J Phy Chem C 116(21):11797–11807CrossRef

Schwanninger M, Rodrigues JC, Pereira H, Hinterstoisser B (2004) Effects of short-time vibratory ball milling on the shape of FT-IR spectra of wood and cellulose. Vib Spectrosc 36(1):23–40CrossRef

Silwa F, Bounia NE, Charrier F, Marin G, Malet F (2012) Mechanical and interfacial properties of wood and bio-based thermoplastic composite. Compos Sci Technol 72(14):1733–1740CrossRef

Simonsen J, Jacobson R, Rowell R (1997) Wood fiber reinforcement of styrene-maleic anhydride copolymers. J Appl Polym Sci 68(10):1567–1573CrossRef

Toh HK (1979) Dissertation Loughborough University, 1979

Usuki A, Kojima Y, Kawasumi M, Okada A, Fukus Y (1993) Swelling behaviour of montmorillonite cation exchanged for ώ-amino acids by caprolactam. J Mater Res 8(5):1174–1178CrossRef

Victor A, Agubra VA, Owuor PS, Hosur MV (2013) Influence of nanoclay dispersion methods on the mechanical behaviour of E-glass/epoxy nanocomposites. Nanomater 3(3):550–563CrossRef

Wada M, Heux L, Sugiyama J (2004) Polymorphism of cellulose I family: reinvestigation of cellulose IVI. Biomacromol 5(4):1385–1391CrossRef

Wolfenden JE, Kinzy MS (1997) Measurements of dynamic Young’s modulus and damping of a chemical-vapor infiltrated SiC/SiC composites. J Mater Sci Lett 16(9):708–711CrossRef

Xiao Z, Xie Y, Adamopoulos S, Mai C (2012) Effects of chemical modification with glutaraldehyde on the weathering performance of Scots pine sapwood. Wood Sci Technol 46(4):749–767CrossRef

Xie W, Gao Z, Pan WP, Hunter D, Singh A, Vaia R (2001) Thermal degradation chemistry of alkyl quaternary ammonium montmorillonite. Chem Mater 13(9):2979–2990CrossRef

Xu B, Ding J, Feng L, Ding Y, Ge F, Cai Z (2015) Self-cleaning cotton fabrics via combination of photocatalytic TiO₂ and superhydrophobic SiO₂. Surf Coating Technol 262:70–76CrossRef

Yang H, Yan R, Chen H, Lee DH, Zheng C (2007) Characteristic of hemicellulose, cellulose and lignin pyrolysis. Fuel 86(12–13):1781–1788CrossRef

Yao H, You Z, Li L, Goh SW, Lee CH, Yap YK, Shi X (2013) Rheological properties and chemical analysis of nanoclay and carbon microfiber modified asphalt with Fourier transform infrared spectroscopy. Const Build Mater 38:327–337CrossRef

Zhao Y, Wang K, Zhu F, Xue P, Jia M (2006) Properties of poly(vinyl chloride)/wood flour/montmorillonite composites: effects of coupling agents and layered silicate. Polym Degrad Stabil 91(12):2874–2883CrossRef

Title: Physico-mechanical, Morphological, and Thermal Properties of Clay Dispersed Styrene-co-Maleic Acid Impregnated Wood Polymer Nanocomposites
Authors: M. R. Rahman
S. Hamdan
J. C. H. Lai
Publisher: Springer International Publishing
Book: Wood Polymer Nanocomposites
Print ISBN: 978-3-319-65734-9

Electronic ISBN: 978-3-319-65735-6

Copyright Year: 2018
DOI: https://doi.org/10.1007/978-3-319-65735-6_10

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners