Top

Published in:

2018 | Supplement | Chapter

Physico-Mechanical, Thermal, and Morphological Properties of Styrene-co-3-(Trimethoxysilyl)Propyl Methacrylate with Clay Impregnated Wood Polymer Nanocomposites

Authors : M. R. Rahman, S. Hamdan, J. C. H. Lai

Published in: Wood Polymer Nanocomposites

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In this study, the physico-mechanical, thermal, and morphological properties of styrene-co-3-(trimethoxysilyl)propyl methacrylate (ST-co-SPMA) with clay impregnated wood polymer nanocomposites (WPNCs) were investigated. The WPNCs were characterized by Fourier Transform Infrared Spectroscopy (FT-IR), X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), 3-point bending and free-vibration testing, and Thermogravimetric Analysis (TGA). The FT-IR results showed that the absorbance intensity at 698 cm⁻¹ was higher for ST-co-MSPM-clay-WPNC and ST-

clay-WPNC when compared to styrene wood polymer composite (ST-WPC), ST-co-MSPA-WPC, and raw wood. The XRD result revealed that the d-spacing of WPNCs and WPCs was higher than that of raw wood. The SEM results showed that ST-co-MSPM-clay-WPNC had smoother surfaces when compared to other nanocomposites and raw wood. The modulus of elasticity (MOE), modulus of rupture (MOR), dynamic Young’s moduli (Ed), and thermal stability of ST-co-MSPM-clay-WPNC were considerably higher when compared to wood polymer nanocomposites (WPNCs) and raw wood.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Preparation and Characterizations of Clay-Dispersed Styrene-co-Ethylene Glycol Dimethacrylate-Impregnated Wood Polymer Nanocomposites

next chapter Acrylonitrile/Butyl Methacrylate/Halloysite Nanoclay Impregnated Sindora Wood Polymer Nanocomposites (WPNCs): Physico-mechanical, Morphological and Thermal Properties

Agubra VA, Owuor PS, Hosur MV (2013) Influence of nanoclay dispersion methods on the mechanical behavior of E-glass/epoxy nanocomposites. Nanomater 3:550–563CrossRef

Banks WB, Lawther ML (eds) (1994) Cellulosic polymers blends and composites. Hanser/Garder Publications Inc., Cincinnati

Baysal E (2011) Combustion properties of wood impregnated with commercial fertilizers. African J Biotechnol 10:19255–19560

Catauroa M, Papalea F, Lamannaa G, Bollinoa F (2015) Geopolymer/PEG hybrid materials synthesis and investigation of the polymer influence on microstructure and mechanical behavior. Mater Res 18:698–705CrossRef

Chang MK, Li SJ (2011) A study of strength and thermal stability of low-density polyethylene grafted maleic anhydride/montmorillonite nanocomposites. In: IEEE international conference on industrial engineering and operational management. Kuala Lumpur, Malaysia, 22–24 Jan 2011

Chen JS, Poliks MD, Ober CK, Zhang Y, Wiesner U, Giannelis E (2002) Study of the interlayer expansion mechanism and thermal-mechanical properties of surface-initiated epoxy nanocomposites. Polym 43:4895–4904CrossRef

Chen T, Wu Z, Niu M, Xie Y, Wang X (2016) Effect of Si–Al molar ratio on microstructure and mechanical properties of ultra-low density fiberboard. Eur J Wood Wood Prod 74:151–160CrossRef

Donnell A, Dweib MA, Wool RP (2004) Natural fiber composites with plant oil-based resin. Compos Sci Technol 64:1135–1145CrossRef

Feist WC, Hon DNS (1984) Chemistry of weathering and protection. Chem Solid Wood 11:401–451CrossRef

Fengel D, Wegener G (1989) Wood: chemistry, ultrastructure, reactions. Walter de Gruyter, Berlin

Gaboune A, Ray SS, Ait-Kadi A, Riedl B, Bousmina M (2006) Polyethylene/clay nanocomposites prepared by polymerization compounding method. J Nanosci Nanotechnol 6:530–535CrossRef

García M, Hidalgo J, Garmendia I, García-Jaca J (2009) Wood-plastics composites with better fire retardancy and durability performance. Compos Part A Appl Sci Manuf 40:1772–1776CrossRef

Hamdan S, Rahman R, Ahmed AS, Talib ZA, Islam S (2010) Influence of N,N-dimethylacetamid on the thermal and mechanical properties of polymer-filled wood. BioRes 5:2611–2624

Islam MS, Hamdan S, Rusop M, Rahman MR (2013) Thermal stability and decay resistance properties of tropical wood polymer nanocomposites (WPNC). Adv Mater Res 667:482–489CrossRef

Ismail H, Shuhelmy S, Edyham MR (2002) The effects of a silane coupling agent on curing characteristics and mechanical properties of bamboo fibre filled natural rubber composites. Eur Polym J 38:39–47CrossRef

Karesoja M, Jokinen H, Karjalainen E, Pulkkinen P, Torkkeli M, Soininen A, Ruokolainen J, Tenhu H (2009) Grafting of montmorillonite nano-clay with butyl acrylate (BuA) and methacrylate (MMA) by ATRP. Blends with poly(BuA-co-MMA. J Polym Sci Part A 47(12):3086–3097CrossRef

Kim HS, Kim S, Kim HJ, Yang HS (2006) Thermal properties of bio-flour-filled polyolefin composites with different compatibilizing agent type and content. Thermochim Acta 451:181–188CrossRef

Kojima Y, Usuki A, Kawasumi M, Okada A, Fukushima Y, Kurauchi T (2011) Mechanical properties of nylon 6-clay hybrid. J Mater Res 8:1185–1189CrossRef

Kondo T (1996) A Fourier transform infra-red spectroscopic analysis of the character of hydrogen bonds in amorphous cellulose. Polym 37:393–399CrossRef

Kosonen ML, Wang B, Caneba GT, Gardner DJ (2000) Polystyrene/wood composites and hydrophobic wood coatings from water-based hydrophilic-hydrophobic block. Clan Prod Process 2:117–123CrossRef

Ku H, Wang H, Pattarachaiyakoop N, Trada M (2011) A review on the tensile properties of natural fiber reinforced polymer composites. Compos Part B Eng 42:856–873CrossRef

Kumar S (1994) Chemical modification of wood. Wood Fiber Sci 26:270–280

Levan SL, Tran HC (1990) The role of boron in flame-retardant treatments. Forest Prod Res Soc 1990:39–41

Li YF, Liu YX, Wang XM, Wu QL, Yu HP, Li J (2011) Wood–polymer composites prepared by the in situ polymerization of monomers within wood. Appl Polym Sci 119:3207–3216CrossRef

Liodakis S, Bakirtzis D, Dimitrakopoulos AP (2003) Autoignition and thermogravimetric analysis of forest species treated with fire retardants. Thermochim Acta 399:31–42CrossRef

Liu Z, Jiang Z, Fei B, Liu X (2013) Thermal decomposition characteristics of chinese fir. BioRes 8:5014–5024

Lu SY, Hamerton I (2002) Recent developments in the chemistry of halogen-free flame retardant polymers. Prog Polym Sci 27:1661–1712CrossRef

Lu T, Jiang M, Jiang Z, Hui D, Wang Z, Zhou Z (2013) Effect of surface modification of bamboo cellulose fibers on mechanical properties of cellulose/epoxy composites. Compos Part B 51(51):28–34CrossRef

Mattos BD, Cademartori PHG, Louren TV, Gatto DA, Magalhaes WLE (2014) Biodeterioration of wood from two fast-growing eucalypts exposed to field test. Int Biodeterior Biodegrad 93:210–215CrossRef

Parker RW, Frost RL (1996) The application of drift spectroscopy to the multicomponent analysis of organic chemicals adsorbed on montmorillonite. Clay Miner 44:32–40CrossRef

Rahman MR, Hamdan S, Ahmed AS, Islam MS (2010a) Mechanical and biological performance of sodium metaperiodate-impregnated plasticized wood (PW). BioRes 5:1022–1035

Rahman MR, Hamdan S, Ahmed AS, Islam MS (2010b) Mechanical and biological performance of sodium metaperiodate-impregnated plasticized wood (PW). BioRes 5:1022–1035

Rahman MR, Hamdan S, Ahmed AS, Islam MS, Talib ZA, Islam MS, Abdullah WFW, Mat MSC (2011) Thermogravimetric analysis and dynamic Young’s modulus measurement of N,N-dimethylacetamide-impregnated wood polymer composites. J Vinyl Addit Technol 17:177–183CrossRef

Rahman MM, Rahman MR, Hamdan S, Hossen MF, Lai JCH, Liew FK (2015) Synthesis of cotton from tossa jute fiber and comparison with original cotton. Int J Polym Sci 2015:1–4CrossRef

Rangel-Vázquez NA, Leal-García T (2010) Spectroscopy analysis of chemical modification of cellulose fibers. J Mex Chem Soc 54:192–197

Rashmi Renukappa NM, Suresha B, Devarajaiah RM, Shivakumar KN (2011) Dry sliding wear behaviour of organo-modified montmorillonite filled epoxy nanocomposites using Taguchi’s techniques. Mater Des 32:4528–4536CrossRef

Ray SS, Bousmina M (2005) Biodegradable polymers and their layered silicate nanocomposites: in greening the 21st century materials world. Prog Mater Sci 50:962–1079CrossRef

Ray SS, Okamoto M (2003) Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog Polym Sci 28:1539–1641CrossRef

Rowell RM (2006) Chemical modification of wood: a short review. Wood Mater Sci Eng 1:29–33CrossRef

Rowell RM (2014) Acetylation of wood—a review. Intl J Lignocellul Prod 1:1–27

Sanchez-Jimenez PE, Perez-Maqueda LA, Crespo-Amoros JE, Lopez J, Perejon A, Criado JM (2012) Nanoclay nucleation effect in the thermal stabilization of a polymer nanocomposite: a kinetic mechanism change. J Phys Chem 116(21):11797–11807

Stolf DO, Lahr FAR (2004) Wood-polymer composite: physical and mechanical properties of some wood species impregnated with styrene and methyl methacrylate. J Mater Res 7:611–617CrossRef

Toh HK (1979) A study of diffusion in polymers using C-14 labelled molecules. Diss Loughbrgh Univ Leicestershire, United Kingdom, pp 49–50

Torrey JD, Bordia RK (2008) Mechanical properties of polymer-derived ceramic composite coatings on steel. J Eur Ceram Soc 28:253–257CrossRef

Usuki A, Kawasumi M, Kojima Y, Okada A, Kurauchi T, Kamigaito O (1993) Swelling behavior of montmorillonite cation exchanged for ω-amino acids by -caprolactam. J Mater Res 8:1174–1178CrossRef

Wada M, Heux L, Sugiyama J (2004) Polymorphism of cellulose I family: reinvestigation of cellulose IVl. Biomacromol 5:1385–1391CrossRef

Xie W, Gao Z, Pan WP, Hunter D, Singh A, Vaia R (2001) Thermal degradation chemistry of alkyl quaternary ammonium Montmorillonite. Chem Mater 13:2979–2990CrossRef

Xu Y, Guo Z, Fang Z, Peng M, Shen L (2013) Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene. J Appl Polym Sci 128:283–291CrossRef

Xu B, Ding J, Feng L, Ding Y, Ge F, Cai Z (2015) Self-cleaning cotton fabrics via combination of photocatalytic TiO₂ and superhydrophobic SiO₂. Surf Coatings Technol 262:70–76CrossRef

Yang H, Yan R, Chen H, Lee DH, Zheng C (2007) Characteristics of hemicellulose, cellulose and lignin pyrolysis. Fuel 86:1781–1788CrossRef

Yao H, You Z, Li L, Goh SW, Lee CH, Yap YK (2013) Rheological properties and chemical analysis of nanoclay and carbon microfiber modified asphalt with Fourier transform infrared spectroscopy. Constr Build Mater 38:327–337CrossRef

Yunchu H, Peijang Z, Songsheng Q (2000) TG-DTA studies on wood treated with flame-retardants. Holz Als Roh- Und Werkst 58:35–38CrossRef

Zhang S, Horrocks AR (2003) A review of flame retardant polypropylene fibres. Prog Polym Sci 28:1517–1538CrossRef

Title: Physico-Mechanical, Thermal, and Morphological Properties of Styrene-co-3-(Trimethoxysilyl)Propyl Methacrylate with Clay Impregnated Wood Polymer Nanocomposites
Authors: M. R. Rahman
S. Hamdan
J. C. H. Lai
Publisher: Springer International Publishing
Book: Wood Polymer Nanocomposites
Print ISBN: 978-3-319-65734-9

Electronic ISBN: 978-3-319-65735-6

Copyright Year: 2018
DOI: https://doi.org/10.1007/978-3-319-65735-6_12

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners