Top

Published in:

2019 | OriginalPaper | Chapter

Preliminary Study of Residual Stress Measurement Using Eddy Currents Phasor Angle

Authors : Frantisek Botko, Jozef Zajac, Andrej Czan, Svetlana Radchenko, Vladimir Simkulet, Pavol Radic, Jaroslav Bircak

Published in: Advances in Manufacturing Engineering and Materials

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Residual stress detection and evaluation has been of crucial importance, and also problematic for many years. There are many methods of residual stresses determination based on destructive and non-destructive way of approach. Nowadays there are still undiscovered possibilities to determine these internal stresses. Opportunity to detect residual stress on line directly, without using big and expensive devices is motivation for presented work. Presented article is focused on possibility to determine the residual stresses induced in conductive materials using eddy currents phasor angle. Using eddy currents method gives opportunity for quick on line measurement of residual stresses. Induced stress causes in base material slight deviation in permeability and conductivity, which can be detected using standard eddy currents flaw detector. Experimental procedure included annealing for stress relief, manufacturing by face milling and measurement of residual stresses using x-ray diffraction and eddy currents. Results of experimental research lead to extension of knowledge in the field of residual stresses. Presented method is applicable for assessment of residual stresses in many components.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Increasing Compressor Wheel Fatigue Life Through Residual Stress Generation

next chapter Forces and Process Dynamics in Profiling of AlCu4MgSi Aluminium Alloy

Kloos, K.H., Kaiser, B.: Residual stresses induced by manufacturing, residual stresses measurement, calculation, evaluation. In: Hauk, V., Hougardy, H., Macherauch, E. (eds.) Proceedings of the Conference on Residual Stresses, Darmstadt, Deutsche Gesellschaft für Metallkunde, Oberursel, pp. 205–226 (1991)

Davim, P.J.: Residual stresses and microstructural modifications. In: Surface Integrity in Machining, pp. 67–126. Springer, London (2010). https://doi.org/10.1007/978-1-84882-874-2

Winiarski, B., Benedetti, M., Fontanari, V., et al.: High spatial resolution evaluation of residual stresses in shot peened specimens containing sharp and blunt notches by micro-hole drilling, micro-slot cutting and micro-x-ray diffraction methods. Exp. Mech. 56, 1449–1463 (2016). https://doi.org/10.1007/s11340-016-0182-xCrossRef

Sun, T.Z., Roy, M.J., Strong, D., et al.: Comparison of residual stress distributions in conventional and stationary shoulder high-strength aluminum alloy friction stir welds. J. Mater. Process. Technol. 242, 91–100 (2017). https://doi.org/10.1016/j.jmatprotec.2016.11.015CrossRef

Coules, H.E., Smith, D.J., Orrock, P.J., et al.: A combined experimental and modelling approach to elastic-plastic crack driving force calculation in the presence of residual stresses. Exp. Mech. 56, 1313–1325 (2016). https://doi.org/10.1007/s11340-016-0171-0CrossRef

Smith, D.J.: Creep stress relaxation and crack incubation in the presence of structural elastic follow-up. Trans. Indian Inst. Metals 69, 483–488 (2016). https://doi.org/10.1007/s12666-015-0819-yCrossRef

Ainsworth, R.A., Sharples, J.K., Smith, S.D.: Effects of residual stresses on fracture behaviour-experimental results and assessment methods. J. Strain Anal. Eng. Des. 35, 307–316 (2000). https://doi.org/10.1243/0309324001514431CrossRef

Venkata, K.A., Truman, C.E., Smith, D.J., et al.: Characterising electron beam welded dissimilar metal joints to study residual stress relaxation from specimen extraction. Int. J. Press. Vessel. Pip. 139, 237–249 (2016). https://doi.org/10.1016/j.ijpvp.2016.02.025CrossRef

Wang, D.M., Mu, J., Chen, Y., et al.: A study of stress-induced phase transformation and micromechanical behavior of CuZr-based alloy by in-situ neutron diffraction. J. Alloys Compd. 696, 1096–1104 (2017). https://doi.org/10.1016/j.jallcom.2016.12.020CrossRef

10.

Wang, Y.L., Zhu, Y.L., Hou, S., et al.: Investigation on fatigue performance of cold expansion holes of 6061-T6 aluminum alloy. Int. J. Fatigue 95, 216–228 (2017). https://doi.org/10.1016/j.ijfatigue.2016.10.030CrossRef

11.

Yang, H., Yo, D., Chen, Y., et al.: In-situ TOF neutron diffraction studies of cyclic softening in superelasticity of a NiFeGaCo shape memory alloy. Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Process. 680, 324–328 (2017). https://doi.org/10.1016/j.msea.2016.10.078CrossRef

12.

Aba-Perea, P.E., Pilling, T., Withers, P.J., et al.: Determination of the high temperature elastic properties and diffraction elastic constants of Ni-base superalloys. Mater. Des. 89, 856–863 (2016). https://doi.org/10.1016/j.matdes.2015.09.152CrossRef

13.

Aba-Perea, P.E., Pilling, T., Preuss, M.: In-situ residual stress analysis during annealing treatments using neutron diffraction in combination with a novel furnace design. Mater. Des. 110, 925–931 (2016)CrossRef

14.

Krejci, L., Hlavaty, I., Sevcikova, X.: Transition zones study of the heterogenous welded joints. In: 22nd International Conference on Metallurgy and Materials, Metal 2013, pp. 785–789 (2013)

15.

Wang, Q., Liu, X.S., Yan, Z.J., et al.: On the mechanism of residual stresses relaxation in welded joints under cyclic loading. Int. J. Fatigue 105, 43–59 (2017). https://doi.org/10.1016/j.ijfatigue.2017.08.016CrossRef

16.

Mohyla, P., Tomcik, P., Benes, L., et al.: Effect of post-welding heat treatment on secondary hardening of welded joints Cr-Mo-V Steel. Metal Sci. Heat Treat. 53, 374–378 (2011). https://doi.org/10.1007/s11041-011-9401-3CrossRef

17.

Cozzolino, L.D., Coules, H.E., Colegrove, P.A., et al.: Investigation of post-weld rolling methods to reduce residual stress and distortion. J. Mater. Process. Technol. 247, 243–256 (2017). https://doi.org/10.1016/j.jmatprotec.2017.04.018CrossRef

18.

Shen, Y., Lo, C.C.H., Nakagawa, N., Frishman, A.M.: Residual stress profile assessment by eddy current for shot peened nickel superalloy. J. Nondestruct. Eval. 29(1), 1–13 (2010)CrossRef

19.

Abu-Nabah, B.A., Hassan, W.T., Ryan, D., Blodgett, M.P., Nagy, P.B.: The effect of hardness on eddy current residual stress profiling in shot-peened nickel alloys. J. Nondestruct. Eval. 29(3), 143–153 (2010)CrossRef

20.

Habibalahi, A., Safizadeh, M.S.: Forward to residual stress measurement by using pulsed eddy current technique. Insight Non Destruct. Test. Cond. Monit. 55(9), 492–497 (2013)CrossRef

21.

Abu-Nabah, M.B.B., Hassan, W., Nagy, P.B.: On the limitations of eddy current residual stress profiling in precipitation-hardened nickel-base superalloys. In: Electromagnetic Nondestructive Evaluation (XIII), vol. 13, p. 95 (2010)

22.

Boone, T.A.P.S., Raoa, S.I., Wang, P., Nagy, P., Blodgett, M.: Investigation of microstructural effects on electrical resistivity and their implications for eddy current methods in measuring residual stresses in IN718. In: Electromagnetic Nondestructive Evaluation (XIII), vol. 13, p. 165 (2010)

23.

Withers, P.J., Bhadeshia, H.K.D.H.: Residual stress. Part 1–measurement techniques. Mater. Sci. Technol. 17(4), 355–365 (2001)CrossRef

24.

Kumar, A.: Synthesis and Characterization of TiO2-GeO2-Azobenzene nanocomposite as Photoanode for Dye Sensitized Solar Cells and other Optoelectronic devices Applications. Doctoral dissertation, Pondicherry University (2016)

25.

García-Martín, J., Gómez-Gil, J., Vázquez-Sánchez, E.: Non-destructive techniques based on eddy current testing. Sensors 11(3), 2525–2565 (2011)CrossRef

Title: Preliminary Study of Residual Stress Measurement Using Eddy Currents Phasor Angle
Authors: Frantisek Botko
Jozef Zajac
Andrej Czan
Svetlana Radchenko
Vladimir Simkulet
Pavol Radic
Jaroslav Bircak
Publisher: Springer International Publishing
Book: Advances in Manufacturing Engineering and Materials
Print ISBN: 978-3-319-99352-2

Electronic ISBN: 978-3-319-99353-9

Copyright Year: 2019
DOI: https://doi.org/10.1007/978-3-319-99353-9_41

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partners