Skip to main content
Top

2018 | OriginalPaper | Chapter

4.  Premixed Charge Preparation Strategies

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Mixing of fuel and oxidiser (air) for combustion is termed as charge preparation. Creation of premixed charge is the key feature of low temperature combustion (LTC) engines. Quality of fuel–air mixture governs the combustion process and its rate. Premixed charge is required prior to the start of combustion in LTC engines. Depending on LTC strategy, different quality of premixed charge (degree of homogeneity) is required for higher thermal efficiency and control of the combustion rate. The premixed charge can be created by injecting fuel outside the engine cylinder (external charge preparation) or inside the engine cylinder (internal charge preparation), depending on fuel properties and combustion strategy. This chapter presents the summary of premixing techniques used for charge preparation in LTC engines. Charge preparation strategies for well-mixed charge (more often external charge preparation) and partially stratified charge (internal charge preparation using direct injection) are discussed in detailed for gasoline-like fuels as well as diesel-like fuels. Dual fuel charge preparation (using high and low reactivity fuels) is typically used in RCCI combustion is also discussed in the present chapter.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Herold RE, Foster DE, Ghandhi JB, Iverson RJ, Eng JA, Najt PM (2007) Fuel unmixedness effects in a gasoline homogeneous charge compression ignition engine. Int J Engine Res 8(3):241–257CrossRef Herold RE, Foster DE, Ghandhi JB, Iverson RJ, Eng JA, Najt PM (2007) Fuel unmixedness effects in a gasoline homogeneous charge compression ignition engine. Int J Engine Res 8(3):241–257CrossRef
2.
go back to reference Dec JE, Dernotte J, Ji C (2017) Increasing the load range, load-to-boost ratio, and efficiency of low-temperature gasoline combustion (LTGC) engines. SAE Int J Engines 10(2017-01-0731) Dec JE, Dernotte J, Ji C (2017) Increasing the load range, load-to-boost ratio, and efficiency of low-temperature gasoline combustion (LTGC) engines. SAE Int J Engines 10(2017-01-0731)
3.
go back to reference Maurya RK, Agarwal AK (2015) Combustion and emission characterization of n-butanol fueled HCCI engine. J Energy Resour Technol 137(1):011101CrossRef Maurya RK, Agarwal AK (2015) Combustion and emission characterization of n-butanol fueled HCCI engine. J Energy Resour Technol 137(1):011101CrossRef
4.
go back to reference Maurya RK, Agarwal AK (2011) Experimental study of combustion and emission characteristics of ethanol fuelled port injected homogeneous charge compression ignition (HCCI) combustion engine. Appl Energy 88(4):1169–1180CrossRef Maurya RK, Agarwal AK (2011) Experimental study of combustion and emission characteristics of ethanol fuelled port injected homogeneous charge compression ignition (HCCI) combustion engine. Appl Energy 88(4):1169–1180CrossRef
5.
go back to reference Maurya RK, Agarwal AK (2009) Experimental investigation of the effect of the intake air temperature and mixture quality on the combustion of a methanol-and gasoline-fuelled homogeneous charge compression ignition engine. Proc Inst Mech Eng D J Automob Eng 223(11):1445–1458CrossRef Maurya RK, Agarwal AK (2009) Experimental investigation of the effect of the intake air temperature and mixture quality on the combustion of a methanol-and gasoline-fuelled homogeneous charge compression ignition engine. Proc Inst Mech Eng D J Automob Eng 223(11):1445–1458CrossRef
6.
go back to reference Fiengo G, di Gaeta A, Palladino A, Giglio V (2013) Basic concepts on GDI systems. In: Common rail system for GDI engines. Springer, London, pp 17–33CrossRef Fiengo G, di Gaeta A, Palladino A, Giglio V (2013) Basic concepts on GDI systems. In: Common rail system for GDI engines. Springer, London, pp 17–33CrossRef
7.
go back to reference Yu J, Abe M, Sukegawa Y (2017) A numerical method to simulate intake-port fuel distribution in PFI engine and its application (No. 2017-01-0565). SAE technical paper Yu J, Abe M, Sukegawa Y (2017) A numerical method to simulate intake-port fuel distribution in PFI engine and its application (No. 2017-01-0565). SAE technical paper
8.
go back to reference Maurya RK, Agarwal AK (2014) Experimental investigations of performance, combustion and emission characteristics of ethanol and methanol fueled HCCI engine. Fuel Process Technol 126:30–48CrossRef Maurya RK, Agarwal AK (2014) Experimental investigations of performance, combustion and emission characteristics of ethanol and methanol fueled HCCI engine. Fuel Process Technol 126:30–48CrossRef
9.
go back to reference Ryan TW, Callahan TJ (1996) Homogeneous charge compression ignition of diesel fuel (No. 961160). SAE technical paper Ryan TW, Callahan TJ (1996) Homogeneous charge compression ignition of diesel fuel (No. 961160). SAE technical paper
10.
go back to reference Suzuki H, Koike N, Ishii H, Odaka M (1997) Exhaust purification of diesel engines by homogeneous charge with compression ignition part 1: experimental investigation of combustion and exhaust emission behavior under pre-mixed homogeneous charge compression ignition method (No. 970313). SAE technical paper Suzuki H, Koike N, Ishii H, Odaka M (1997) Exhaust purification of diesel engines by homogeneous charge with compression ignition part 1: experimental investigation of combustion and exhaust emission behavior under pre-mixed homogeneous charge compression ignition method (No. 970313). SAE technical paper
11.
go back to reference McGee J, Curtis EW, Russ S, Lavoie G (2000) The effects of port fuel injection timing and targeting on fuel preparation relative to a pre-vaporized system (No. 2000-01-2834). SAE technical paper McGee J, Curtis EW, Russ S, Lavoie G (2000) The effects of port fuel injection timing and targeting on fuel preparation relative to a pre-vaporized system (No. 2000-01-2834). SAE technical paper
12.
go back to reference Imatake N, Saito K, Morishima S, Kudo S, Ohhata A (1997) Quantitative analysis of fuel behavior in port-injection gasoline engines (No. 971639). SAE technical paper Imatake N, Saito K, Morishima S, Kudo S, Ohhata A (1997) Quantitative analysis of fuel behavior in port-injection gasoline engines (No. 971639). SAE technical paper
13.
go back to reference Meyer R, Yilmaz E, Heywood JB (1998) Liquid fuel flow in the vicinity of the intake valve of a port-injected SI engine (No. 982471). SAE technical paper Meyer R, Yilmaz E, Heywood JB (1998) Liquid fuel flow in the vicinity of the intake valve of a port-injected SI engine (No. 982471). SAE technical paper
14.
go back to reference Meyer R, Heywood JB (1997) Liquid fuel transport mechanisms into the cylinder of a firing port-injected SI engine during start up (No. 970865). SAE technical paper Meyer R, Heywood JB (1997) Liquid fuel transport mechanisms into the cylinder of a firing port-injected SI engine during start up (No. 970865). SAE technical paper
15.
go back to reference Sukegawa Y, Oryoji K (2015) 3D modeling of particulate matter from spark ignition engines. SAE Int J Engines 8(2015-01-0391):419–425CrossRef Sukegawa Y, Oryoji K (2015) 3D modeling of particulate matter from spark ignition engines. SAE Int J Engines 8(2015-01-0391):419–425CrossRef
16.
go back to reference Panão MRO, Moreira ALN (2007) Interpreting the influence of fuel spray impact on mixture preparation for HCCI combustion with port-fuel injection. Proc Combust Inst 31(2):2205–2213CrossRef Panão MRO, Moreira ALN (2007) Interpreting the influence of fuel spray impact on mixture preparation for HCCI combustion with port-fuel injection. Proc Combust Inst 31(2):2205–2213CrossRef
17.
go back to reference Claret J, Lauer T, Bobicic N, Posselt A, Schlerfer J (2017) Impact of the injection and gas exchange on the particle emission of a spark ignited engine with port fuel injection (No. 2017-01-0652). SAE technical paper Claret J, Lauer T, Bobicic N, Posselt A, Schlerfer J (2017) Impact of the injection and gas exchange on the particle emission of a spark ignited engine with port fuel injection (No. 2017-01-0652). SAE technical paper
18.
go back to reference Knop V, Jay S (2006) Latest developments in gasoline auto-ignition modelling applied to an optical CAI (Tm) engine. Oil Gas Sci Technol 61(1):121–137CrossRef Knop V, Jay S (2006) Latest developments in gasoline auto-ignition modelling applied to an optical CAI (Tm) engine. Oil Gas Sci Technol 61(1):121–137CrossRef
19.
go back to reference Gray AWB, Ryan TW (1997) Homogeneous charge compression ignition (HCCI) of diesel fuel (No. 971676). SAE technical paper Gray AWB, Ryan TW (1997) Homogeneous charge compression ignition (HCCI) of diesel fuel (No. 971676). SAE technical paper
20.
go back to reference Christensen M, Hultqvist A, Johansson B (1999) Demonstrating the multi fuel capability of a homogeneous charge compression ignition engine with variable compression ratio (No. 1999-01-3679). SAE technical paper Christensen M, Hultqvist A, Johansson B (1999) Demonstrating the multi fuel capability of a homogeneous charge compression ignition engine with variable compression ratio (No. 1999-01-3679). SAE technical paper
21.
go back to reference Simescu S, Fiveland SB, Dodge LG (2003) An experimental investigation of PCCI-DI combustion and emissions in a heavy-duty diesel engine (No. 2003-01-0345). SAE technical paper Simescu S, Fiveland SB, Dodge LG (2003) An experimental investigation of PCCI-DI combustion and emissions in a heavy-duty diesel engine (No. 2003-01-0345). SAE technical paper
22.
go back to reference Ganesh D, Nagarajan G (2010) Homogeneous charge compression ignition (HCCI) combustion of diesel fuel with external mixture formation. Energy 35(1):148–157CrossRef Ganesh D, Nagarajan G (2010) Homogeneous charge compression ignition (HCCI) combustion of diesel fuel with external mixture formation. Energy 35(1):148–157CrossRef
23.
go back to reference Ganesh D, Nagarajan G, Ganesan S (2014) Experimental investigation of homogeneous charge compression ignition combustion of biodiesel fuel with external mixture formation in a CI engine. Environ Sci Technol 48(5):3039–3046CrossRef Ganesh D, Nagarajan G, Ganesan S (2014) Experimental investigation of homogeneous charge compression ignition combustion of biodiesel fuel with external mixture formation in a CI engine. Environ Sci Technol 48(5):3039–3046CrossRef
24.
go back to reference Dempsey AB, Curran SJ, Wagner RM (2016) A perspective on the range of gasoline compression ignition combustion strategies for high engine efficiency and low NOx and soot emissions: effects of in-cylinder fuel stratification. Int J Engine Res 17(8):897–917CrossRef Dempsey AB, Curran SJ, Wagner RM (2016) A perspective on the range of gasoline compression ignition combustion strategies for high engine efficiency and low NOx and soot emissions: effects of in-cylinder fuel stratification. Int J Engine Res 17(8):897–917CrossRef
25.
go back to reference Sjöberg M, Edling LO, Eliassen T, Magnusson L, Ångström HE (2002) GDI HCCI: effects of injection timing and air swirl on fuel stratification, combustion and emissions formation (No. 2002-01-0106). SAE technical paper Sjöberg M, Edling LO, Eliassen T, Magnusson L, Ångström HE (2002) GDI HCCI: effects of injection timing and air swirl on fuel stratification, combustion and emissions formation (No. 2002-01-0106). SAE technical paper
26.
go back to reference Dec JE, Yang Y, Dronniou N (2011) Boosted HCCI-controlling pressure-rise rates for performance improvements using partial fuel stratification with conventional gasoline. SAE Int J Engines 4(2011-01-0897):1169–1189CrossRef Dec JE, Yang Y, Dronniou N (2011) Boosted HCCI-controlling pressure-rise rates for performance improvements using partial fuel stratification with conventional gasoline. SAE Int J Engines 4(2011-01-0897):1169–1189CrossRef
27.
go back to reference Sjöberg M, Dec JE (2006) Smoothing HCCI heat-release rates using partial fuel stratification with two-stage ignition fuels (No. 2006-01-0629). SAE technical paper Sjöberg M, Dec JE (2006) Smoothing HCCI heat-release rates using partial fuel stratification with two-stage ignition fuels (No. 2006-01-0629). SAE technical paper
28.
go back to reference Yang Y, Dec JE, Dronniou N, Sjöberg M (2011) Tailoring HCCI heat-release rates with partial fuel stratification: comparison of two-stage and single-stage-ignition fuels. Proc Combust Inst 33(2):3047–3055CrossRef Yang Y, Dec JE, Dronniou N, Sjöberg M (2011) Tailoring HCCI heat-release rates with partial fuel stratification: comparison of two-stage and single-stage-ignition fuels. Proc Combust Inst 33(2):3047–3055CrossRef
29.
go back to reference Dernotte J, Dec J, Ji C (2017) Efficiency improvement of boosted low-temperature gasoline combustion engines (LTGC) using a double direct-injection strategy (No. 2017-01-0728). SAE technical paper Dernotte J, Dec J, Ji C (2017) Efficiency improvement of boosted low-temperature gasoline combustion engines (LTGC) using a double direct-injection strategy (No. 2017-01-0728). SAE technical paper
30.
go back to reference Sellnau M, Sinnamon J, Hoyer K, Husted H (2011) Gasoline direct injection compression ignition (GDCI)-diesel-like efficiency with low CO2 emissions. SAE Int J Engines 4(2011-01-1386):2010–2022CrossRef Sellnau M, Sinnamon J, Hoyer K, Husted H (2011) Gasoline direct injection compression ignition (GDCI)-diesel-like efficiency with low CO2 emissions. SAE Int J Engines 4(2011-01-1386):2010–2022CrossRef
31.
go back to reference Ra Y, Loeper P, Andrie M, Krieger R, Foster DE, Reitz RD, Durrett R (2012) Gasoline DICI engine operation in the LTC regime using triple-pulse injection. SAE Int J Engines 5(2012-01-1131):1109–1132CrossRef Ra Y, Loeper P, Andrie M, Krieger R, Foster DE, Reitz RD, Durrett R (2012) Gasoline DICI engine operation in the LTC regime using triple-pulse injection. SAE Int J Engines 5(2012-01-1131):1109–1132CrossRef
32.
go back to reference Sellnau MC, Sinnamon J, Hoyer K, Kim J, Cavotta M, Husted H (2013) Part-load operation of gasoline direct-injection compression ignition (GDCI) engine (No. 2013-01-0272). SAE technical paper Sellnau MC, Sinnamon J, Hoyer K, Kim J, Cavotta M, Husted H (2013) Part-load operation of gasoline direct-injection compression ignition (GDCI) engine (No. 2013-01-0272). SAE technical paper
33.
go back to reference Ciatti S, Subramanian SN (2011) An experimental investigation of low-octane gasoline in diesel engines. J Eng Gas Turbines Power 133(9):092802CrossRef Ciatti S, Subramanian SN (2011) An experimental investigation of low-octane gasoline in diesel engines. J Eng Gas Turbines Power 133(9):092802CrossRef
34.
go back to reference Sellnau M, Moore W, Sinnamon J, Hoyer K, Foster M, Husted H (2015) GDCI multi-cylinder engine for high fuel efficiency and low emissions. SAE Int J Engines 8(2015-01-0834):775–790CrossRef Sellnau M, Moore W, Sinnamon J, Hoyer K, Foster M, Husted H (2015) GDCI multi-cylinder engine for high fuel efficiency and low emissions. SAE Int J Engines 8(2015-01-0834):775–790CrossRef
35.
go back to reference Sellnau MC, Sinnamon J, Hoyer K, Husted H (2012) Full-time gasoline direct-injection compression ignition (GDCI) for high efficiency and low NOx and PM. SAE Int J Engines 5(2012-01-0384):300–314CrossRef Sellnau MC, Sinnamon J, Hoyer K, Husted H (2012) Full-time gasoline direct-injection compression ignition (GDCI) for high efficiency and low NOx and PM. SAE Int J Engines 5(2012-01-0384):300–314CrossRef
36.
go back to reference López JJ, García-Oliver JM, García A, Domenech V (2014) Gasoline effects on spray characteristics, mixing and auto-ignition processes in a CI engine under partially premixed combustion conditions. Appl Therm Eng 70(1):996–1006CrossRef López JJ, García-Oliver JM, García A, Domenech V (2014) Gasoline effects on spray characteristics, mixing and auto-ignition processes in a CI engine under partially premixed combustion conditions. Appl Therm Eng 70(1):996–1006CrossRef
37.
go back to reference Tang Q, Liu H, Li M, Yao M, Li Z (2017) Study on ignition and flame development in gasoline partially premixed combustion using multiple optical diagnostics. Combust Flame 177:98–108CrossRef Tang Q, Liu H, Li M, Yao M, Li Z (2017) Study on ignition and flame development in gasoline partially premixed combustion using multiple optical diagnostics. Combust Flame 177:98–108CrossRef
38.
go back to reference Manente V, Tunestal P, Johansson B, Cannella WJ (2010) Effects of ethanol and different type of gasoline fuels on partially premixed combustion from low to high load (No. 2010-01-0871). SAE technical paper Manente V, Tunestal P, Johansson B, Cannella WJ (2010) Effects of ethanol and different type of gasoline fuels on partially premixed combustion from low to high load (No. 2010-01-0871). SAE technical paper
39.
go back to reference Manente V, Johansson B, Tunestal P, Cannella W (2009) Effects of different type of gasoline fuels on heavy duty partially premixed combustion. SAE Int J Engines 2(2009-01-2668):71–88CrossRef Manente V, Johansson B, Tunestal P, Cannella W (2009) Effects of different type of gasoline fuels on heavy duty partially premixed combustion. SAE Int J Engines 2(2009-01-2668):71–88CrossRef
40.
go back to reference Desantes JM, Pastor JV, Payri R, Pastor JM (2005) Experimental characterization of internal nozzle flow and diesel spray behavior. Part II: Evaporative conditions. Atomization Sprays 15(5):517–544CrossRef Desantes JM, Pastor JV, Payri R, Pastor JM (2005) Experimental characterization of internal nozzle flow and diesel spray behavior. Part II: Evaporative conditions. Atomization Sprays 15(5):517–544CrossRef
41.
go back to reference Manente V, Johansson B, Tunestal P (2009) Partially premixed combustion at high load using gasoline and ethanol, a comparison with diesel (No. 2009-01-0944). SAE technical paper Manente V, Johansson B, Tunestal P (2009) Partially premixed combustion at high load using gasoline and ethanol, a comparison with diesel (No. 2009-01-0944). SAE technical paper
42.
go back to reference Najafabadi MI, Tanov S, Wang H, Somers B, Johansson B, Dam N (2017) Effects of injection timing on fluid flow characteristics of partially premixed combustion based on high-speed particle image velocimetry. SAE Int J Engines 10 (2017–01-0744):1443–1453 Najafabadi MI, Tanov S, Wang H, Somers B, Johansson B, Dam N (2017) Effects of injection timing on fluid flow characteristics of partially premixed combustion based on high-speed particle image velocimetry. SAE Int J Engines 10 (2017–01-0744):1443–1453
43.
go back to reference Yanagihara H (2001) Ignition timing control at Toyota “Unibus” combustion system. In: Proceedings of a new generation of engine combustion processes for the future, Editions Technip, Peris, France pp 35–42 Yanagihara H (2001) Ignition timing control at Toyota “Unibus” combustion system. In: Proceedings of a new generation of engine combustion processes for the future, Editions Technip, Peris, France pp 35–42
44.
go back to reference Pastor J, Luján J, Molina S, García JM (2007) Overview of HCCI diesel engines. In: HCCI and CAI engines for the automotive industry. Woodhead Publishing Limited. Cambridge, England Pastor J, Luján J, Molina S, García JM (2007) Overview of HCCI diesel engines. In: HCCI and CAI engines for the automotive industry. Woodhead Publishing Limited. Cambridge, England
45.
go back to reference Wåhlin F (2007) Experimental investigation of impinging diesel sprays for HCCI combustion. Doctoral dissertation, KTH Wåhlin F (2007) Experimental investigation of impinging diesel sprays for HCCI combustion. Doctoral dissertation, KTH
46.
go back to reference Takeda Y, Keiichi N, Keiichi N (1996) Emission characteristics of premixed lean diesel combustion with extremely early staged fuel injection (No. 961163). SAE technical paper Takeda Y, Keiichi N, Keiichi N (1996) Emission characteristics of premixed lean diesel combustion with extremely early staged fuel injection (No. 961163). SAE technical paper
47.
go back to reference Hasegawa R, Yanagihara H (2003) HCCI combustion in DI diesel engine (No. 2003-01-0745). SAE technical paper Hasegawa R, Yanagihara H (2003) HCCI combustion in DI diesel engine (No. 2003-01-0745). SAE technical paper
48.
go back to reference Hashizume T, Miyamoto T, Hisashi A, Tsujimura K (1998) Combustion and emission characteristics of multiple stage diesel combustion (No. 980505). SAE technical paper Hashizume T, Miyamoto T, Hisashi A, Tsujimura K (1998) Combustion and emission characteristics of multiple stage diesel combustion (No. 980505). SAE technical paper
49.
go back to reference Yokota H, Kudo Y, Nakajima H, Kakegawa T, Suzuki T (1997) A new concept for low emission diesel combustion (No. 970891). SAE technical paper Yokota H, Kudo Y, Nakajima H, Kakegawa T, Suzuki T (1997) A new concept for low emission diesel combustion (No. 970891). SAE technical paper
50.
go back to reference Su W, Lin T, Pei Y (2003) A compound technology for HCCI combustion in a DI diesel engine based on the multi-pulse injection and the BUMP combustion chamber (No. 2003-01-0741). SAE technical paper Su W, Lin T, Pei Y (2003) A compound technology for HCCI combustion in a DI diesel engine based on the multi-pulse injection and the BUMP combustion chamber (No. 2003-01-0741). SAE technical paper
51.
go back to reference Aoyagi Y (2007) HCCI combustion with early and multiple injections in the heavy-duty diesel engine. In: HCCI and CAI engines for the automotive industry. Woodhead Publishing Limited. Cambridge, England Aoyagi Y (2007) HCCI combustion with early and multiple injections in the heavy-duty diesel engine. In: HCCI and CAI engines for the automotive industry. Woodhead Publishing Limited. Cambridge, England
52.
go back to reference Kim MY, Lee CS (2007) Effect of a narrow fuel spray angle and a dual injection configuration on the improvement of exhaust emissions in a HCCI diesel engine. Fuel 86(17):2871–2880CrossRef Kim MY, Lee CS (2007) Effect of a narrow fuel spray angle and a dual injection configuration on the improvement of exhaust emissions in a HCCI diesel engine. Fuel 86(17):2871–2880CrossRef
53.
go back to reference Agarwal AK, Singh AP, Maurya RK (2017) Evolution, challenges and path forward for low temperature combustion engines. Prog Energy Combust Sci 61:1–56CrossRef Agarwal AK, Singh AP, Maurya RK (2017) Evolution, challenges and path forward for low temperature combustion engines. Prog Energy Combust Sci 61:1–56CrossRef
54.
go back to reference Gan S, Ng HK, Pang KM (2011) Homogeneous charge compression ignition (HCCI) combustion: implementation and effects on pollutants in direct injection diesel engines. Appl Energy 88(3):559–567CrossRef Gan S, Ng HK, Pang KM (2011) Homogeneous charge compression ignition (HCCI) combustion: implementation and effects on pollutants in direct injection diesel engines. Appl Energy 88(3):559–567CrossRef
55.
go back to reference Walter B, Gatellier B (2003) Near zero NOx emissions and high fuel efficiency diesel engine: the NADITM concept using dual mode combustion. Oil Gas Sci Technol 58(1):101–114CrossRef Walter B, Gatellier B (2003) Near zero NOx emissions and high fuel efficiency diesel engine: the NADITM concept using dual mode combustion. Oil Gas Sci Technol 58(1):101–114CrossRef
56.
go back to reference Kimura S, Aoki O, Ogawa H, Muranaka S, Enomoto Y (1999) New combustion concept for ultra-clean and high-efficiency small DI diesel engines (No. 1999-01-3681). SAE technical paper Kimura S, Aoki O, Ogawa H, Muranaka S, Enomoto Y (1999) New combustion concept for ultra-clean and high-efficiency small DI diesel engines (No. 1999-01-3681). SAE technical paper
57.
go back to reference Stanglmaier RH, Roberts CE (1999) Homogeneous charge compression ignition (HCCI): benefits, compromises, and future engine applications (No. 1999-01-3682). SAE technical paper Stanglmaier RH, Roberts CE (1999) Homogeneous charge compression ignition (HCCI): benefits, compromises, and future engine applications (No. 1999-01-3682). SAE technical paper
58.
go back to reference Yao M, Zheng Z, Liu H (2009) Progress and recent trends in homogeneous charge compression ignition (HCCI) engines. Prog Energy Combust Sci 35(5):398–437CrossRef Yao M, Zheng Z, Liu H (2009) Progress and recent trends in homogeneous charge compression ignition (HCCI) engines. Prog Energy Combust Sci 35(5):398–437CrossRef
59.
go back to reference Curran S, Gao Z, Wagner R (2014) Reactivity controlled compression ignition drive cycle emissions and fuel economy estimations using vehicle systems simulations with E30 and ULSD. SAE Int J Engines 7(2014-01-1324):902–912CrossRef Curran S, Gao Z, Wagner R (2014) Reactivity controlled compression ignition drive cycle emissions and fuel economy estimations using vehicle systems simulations with E30 and ULSD. SAE Int J Engines 7(2014-01-1324):902–912CrossRef
60.
go back to reference Nazemi M, Shahbakhti M (2016) Modeling and analysis of fuel injection parameters for combustion and performance of an RCCI engine. Appl Energy 165:135–150CrossRef Nazemi M, Shahbakhti M (2016) Modeling and analysis of fuel injection parameters for combustion and performance of an RCCI engine. Appl Energy 165:135–150CrossRef
61.
go back to reference Benajes J, García A, Monsalve-Serrano J, Balloul I, Pradel G (2016) An assessment of the dual-mode reactivity controlled compression ignition/conventional diesel combustion capabilities in a EURO VI medium-duty diesel engine fueled with an intermediate ethanol-gasoline blend and biodiesel. Energy Convers Manag 123:381–391CrossRef Benajes J, García A, Monsalve-Serrano J, Balloul I, Pradel G (2016) An assessment of the dual-mode reactivity controlled compression ignition/conventional diesel combustion capabilities in a EURO VI medium-duty diesel engine fueled with an intermediate ethanol-gasoline blend and biodiesel. Energy Convers Manag 123:381–391CrossRef
62.
go back to reference Benajes J, Pastor JV, García A, Monsalve-Serrano J (2015) The potential of RCCI concept to meet EURO VI NOx limitation and ultra-low soot emissions in a heavy-duty engine over the whole engine map. Fuel 159:952–961CrossRef Benajes J, Pastor JV, García A, Monsalve-Serrano J (2015) The potential of RCCI concept to meet EURO VI NOx limitation and ultra-low soot emissions in a heavy-duty engine over the whole engine map. Fuel 159:952–961CrossRef
63.
go back to reference Curran SJ, Hanson RM, Wagner RM (2012) Reactivity controlled compression ignition combustion on a multi-cylinder light-duty diesel engine. Int J Engine Res 13(3):216–225CrossRef Curran SJ, Hanson RM, Wagner RM (2012) Reactivity controlled compression ignition combustion on a multi-cylinder light-duty diesel engine. Int J Engine Res 13(3):216–225CrossRef
64.
go back to reference Splitter D, Wissink M, DelVescovo D, Reitz RD (2013) RCCI engine operation towards 60% thermal efficiency (No. 2013-01-0279). SAE technical paper Splitter D, Wissink M, DelVescovo D, Reitz RD (2013) RCCI engine operation towards 60% thermal efficiency (No. 2013-01-0279). SAE technical paper
65.
go back to reference Benajes J, García A, Monsalve-Serrano J, Boronat V (2017) Achieving clean and efficient engine operation up to full load by combining optimized RCCI and dual-fuel diesel-gasoline combustion strategies. Energy Convers Manag 136:142–151CrossRef Benajes J, García A, Monsalve-Serrano J, Boronat V (2017) Achieving clean and efficient engine operation up to full load by combining optimized RCCI and dual-fuel diesel-gasoline combustion strategies. Energy Convers Manag 136:142–151CrossRef
66.
go back to reference Hariprasad T (2013) Effect of injection pressure on performance of dual fuel diesel engine (No. 2013-01-2887). SAE technical paper Hariprasad T (2013) Effect of injection pressure on performance of dual fuel diesel engine (No. 2013-01-2887). SAE technical paper
67.
go back to reference Wissink M, Reitz RD (2015) Direct dual fuel stratification, a path to combine the benefits of RCCI and PPC. SAE Int J Engines 8(2015-01-0856):878–889CrossRef Wissink M, Reitz RD (2015) Direct dual fuel stratification, a path to combine the benefits of RCCI and PPC. SAE Int J Engines 8(2015-01-0856):878–889CrossRef
68.
go back to reference Zhang Y (2017) Comparisons of particulate size distributions from multiple combustion strategies. Doctoral dissertation, The University of Wisconsin-Madison Zhang Y (2017) Comparisons of particulate size distributions from multiple combustion strategies. Doctoral dissertation, The University of Wisconsin-Madison
69.
go back to reference Ohsawa K, Kamimoto T (2008) Advanced diesel combustion. In: Flow and combustion in reciprocating engines. Springer, Berlin/Heidelberg, pp 353–380CrossRef Ohsawa K, Kamimoto T (2008) Advanced diesel combustion. In: Flow and combustion in reciprocating engines. Springer, Berlin/Heidelberg, pp 353–380CrossRef
Metadata
Title
Premixed Charge Preparation Strategies
Author
Rakesh Kumar Maurya
Copyright Year
2018
DOI
https://doi.org/10.1007/978-3-319-68508-3_4

Premium Partner