Top

Arabian Journal for Science and Engineering

Published in:

06-02-2021 | Research Article-Civil Engineering

Presentation of a New Deicer with the Least Moisture and Fatigue Failures in Asphalt Mixtures

Authors: Vahid Najafi Moghaddam Gilani, Seyed Mohsen Hosseinian, Mohammad Nikookar

Published in: Arabian Journal for Science and Engineering | Issue 11/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

One of the most frequently applied materials in cold weather is deicer, which is utilized to maintain winter roads. The effect of various deicers on moisture sensitivity has been explored by researchers in the asphalt industry; however, their effect on thermodynamic parameters and fatigue behavior of asphalt has rarely been studied. In this study, the effect of NaCl, potassium acetate, and calcium magnesium acetate deicers on fatigue and moisture performances of asphalt was explored using nano hydrated lime. Two prediction models of fatigue life ratio (NfR) and tensile strength ratio (TSR) were presented using genetic programming and group method of data handling to obtain optimal nano hydrated lime content. Finally, according to the results of deicer-forming minerals, two new optimal deicers were obtained, and their effect on TSR and NfR was compared with the three above-mentioned deicers. Results showed that TSR and NfR of calcium magnesium acetate saturated samples were higher than those of NaCl and potassium acetate saturated samples. Moreover, by modifying the properties of bitumen with nano hydrated lime, adhesion free energy, cohesion free energy, and debonding energy amounts increased, which indicates an increase in locking between aggregates and bitumen. By determining the minerals that make up deicers using the energy-dispersive X-ray test, two new deicer compounds were made that had better performance over NaCl and potassium acetate. By optimizing additive percentage in genetic programming method (due to higher accuracy), 1.05% nano hydrated lime was proposed as the best optimal amount for the new optimal deicer to simultaneously increase TSR and NfR.

previous article Comparative Study on the Influence of Pile Length and Diameter on Bearing Capacity and Efficiency of Root Piles, Straight-Shaft Piles and Pedestal Piles

next article Determination of Dynamic Behavior of Masonry Structure Using with Operational Modal Analysis Technique

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Tarefder, R.; Faisal, H.; Barlas, G.: Freeze-thaw effects on fatigue LIFE of hot mix asphalt and creep stiffness of asphalt binder. Cold Reg. Sci. Technol. 153, 197–204 (2018)CrossRef

Goh, S.W., et al.: Effect of deicing solutions on the tensile strength of micro-or nano-modified asphalt mixture. Constr. Build. Mater. 25(1), 195–200 (2011)CrossRef

Shi, X.; et al.: Deicer impacts on pavement materials: introduction and recent developments. Open Civ. Eng. J. (2009). https://doi.org/10.2174/1874149500903010016

Hassan, Y., et al.: Effects of runway deicers on pavement materials and mixes: comparison with road salt. J. Transp. Eng. 128(4), 385–391 (2002)CrossRef

Wang, Z., et al.: Investigation on snow-melting performance of asphalt mixtures incorporating with salt-storage aggregates. Constr. Build. Mater. 142, 187–198 (2017)CrossRef

Albayati, A.H.; et al.: Moisture susceptibility of sustainable warm mix asphalt. Adv. Civ. Eng. 2018, 3109435 (2018). https://doi.org/10.1155/2018/3109435CrossRef

Ji, J.; et al.: Moisture susceptibility of warm mix asphalt (WMA) with an organic wax additive based on X-ray computed tomography (CT) technology. Adv. Civ. Eng. 2019, 7101982 (2019). https://doi.org/10.1155/2019/7101982CrossRef

Mirković, K.; Tošić, N.; Mladenović, G.: Effect of different types of fly ash on properties of asphalt mixtures. Adv. Civ. Eng. 2019, 8107264 (2019). https://doi.org/10.1155/2019/8107264CrossRef

Kakar, M.R.; et al.: Evaluating the surface free energy and moisture sensitivity of warm mix asphalt binders using dynamic contact angle. Adv. Civ. Eng. 2019, 9153603 (2019). https://doi.org/10.1155/2019/9153603CrossRef

10.

Taki, Z.N.M.; Abed, A.H.; Al-Mosawe, H.: Evaluating Iraqi modified asphalt concrete moisture resistance based on strength ratio and fracture energy parameters. Adv. Civ. Eng. 2019, 8521682 (2019). https://doi.org/10.1155/2019/8521682CrossRef

11.

Yang, J.; Tighe, S.: A review of advances of nanotechnology in asphalt mixtures. Procedia-Soc. Behav. Sci. 96, 1269–1276 (2013)CrossRef

12.

Najafi Moghaddam Gilani, V., et al.: Prediction and pareto-based multi-objective optimization of moisture and fatigue damages of asphalt mixtures modified with nano hydrated lime. Constr. Build. Mater. 261, 120509 (2020)CrossRef

13.

Behbahani, H., et al.: Predictive model of modified asphalt mixtures with nano hydrated lime to increase resistance to moisture and fatigue damages by the use of deicing agents. Constr. Build. Mater. 265, 120353 (2020)CrossRef

14.

Behbahani, H., et al.: Evaluation of performance and moisture sensitivity of glasphalt mixtures modified with nanotechnology zycosoil as an anti-stripping additive. Constr. Build. Mater. 78, 60–68 (2015)CrossRef

15.

Hosseinian, S.M.; et al.: Investigation of moisture sensitivity and conductivity properties of inductive asphalt mixtures containing steel wool fiber. Adv. Civ. Eng. 2020, 8890814 (2020). https://doi.org/10.1155/2020/8890814CrossRef

16.

Behbahani, H.; Najafi Moghaddam Gilani, V.; Salehfard, R.; Safari, D.: Evaluation of fatigue and rutting behaviour of hot mix asphalt containing rock wool. Int. J. Civ. Eng. 18, 1293–1300 (2020)CrossRef

17.

Liu, Z., et al.: Influence of the chloride-based anti-freeze filler on the properties of asphalt mixtures. Constr. Build. Mater. 51, 133–140 (2014)CrossRef

18.

Liu, Z., et al.: Low temperature property and salt releasing characteristics of antifreeze asphalt concrete under static and dynamic conditions. Cold Reg. Sci. Technol. 114, 9–14 (2015)CrossRef

19.

Ma, T., et al.: Experimental study of deicing asphalt mixture with anti-icing additives. Constr. Build. Mater. 127, 653–662 (2016)CrossRef

20.

Wang, Z., et al.: Laboratory investigation on deicing characteristics of asphalt mixtures using magnetite aggregate as microwave-absorbing materials. Constr. Build. Mater. 124, 589–597 (2016)CrossRef

21.

Wei, H., et al.: Evaluation of anti-icing performance for crumb rubber and diatomite compound modified asphalt mixture. Constr. Build. Mater. 107, 109–116 (2016)CrossRef

22.

Min, Z., et al.: Performances evaluation of epoxy asphalt mixture containing snow-melting agent. Constr. Build. Mater. 155, 762–769 (2017)CrossRef

23.

Feng, D., et al.: Impact of salt and freeze–thaw cycles on performance of asphalt mixtures in coastal frozen region of China. Cold Reg. Sci. Technol. 62(1), 34–41 (2010)CrossRef

24.

Mei, Y., et al.: Fatigue life prediction of asphalt pavement based on cumulative damage. In: 2010 International Conference on Mechanic Automation and Control Engineering. IEEE (2010)

25.

Özgan, E.; Serin, S.: Investigation of certain engineering characteristics of asphalt concrete exposed to freeze–thaw cycles. Cold Reg. Sci. Technol. 85, 131–136 (2013)CrossRef

26.

Goh, S.W.; You, Z.: Evaluation of hot-mix asphalt distress under rapid freeze–thaw cycles using image processing technique. In: CICTP 2012: Multimodal Transportation Systems—Convenient, Safe, Cost-Effective, Efficient, pp. 3305–3315 (2012)

27.

Zeng, X., et al.: Deterioration mechanism of CA mortar due to simulated acid rain. Constr. Build. Mater. 168, 1008–1015 (2018)CrossRef

28.

Ou, J., et al.: A pareto-based evolutionary algorithm using decomposition and truncation for dynamic multi-objective optimization. Appl. Soft Comput. 85, 105673 (2019)CrossRef

29.

Coello, C.A.C.: A comprehensive survey of evolutionary-based multiobjective optimization techniques. Knowl. Inf. Syst. 1(3), 269–308 (1999)CrossRef

30.

McCutchon, J.; Joseph, A.; Valkenberg, J.: Assessment of the effect of urea deicing solution on asphaltic concrete pavements. In: Proceedings of the Annual Conference Of Canadian Technical Asphalt Association. Polyscience Publications Inc. (1998)

31.

Hassan, Y.; Abd El Halim, A.; Razaqpur, A.: Laboratory evaluation and assessment of the effect of runway deicers on the mechanical properties of asphalt concrete mixes subjected to freeze–thaw cycles. Safety and Security, Civil Aviation, Aerodrome Safety, Technical Evaluation Engineering Division, Transport Canada, Ontario, ON, Canada (2000)

32.

Hassan, Y., et al.: Laboratory investigation of effect of deicing chemicals on airfield asphalt concrete pavements materials. In: Proceedings 2nd International Conference on Engineering Materials (2001)

33.

Apeagyei, A.; Struble, L.; Buttlar, W.: Investigation of Alkali-Silica Reaction in asphalt mixtures exposed to potassium acetate deicing solution. In: Advanced Testing and Characterization of Bituminous Materials, Two Volume Set, pp. 479–492. CRC Press, Boca Raton (2009)

34.

Santagata, E.; Baglieri, O.; Riviera, P.P.: Effect of anti-icing chemicals on stripping of asphalt concrete mixtures for airport runway wearing courses. In: Airfield and Highway Pavement 2013: Sustainable and Efficient Pavements, pp. 1229–1239 (2013)

35.

Fakhri, M., et al.: Effects of deicing agents on moisture susceptibility of the WMA containing recycled crumb rubber. Constr. Build. Mater. 227, 116581 (2019)CrossRef

36.

Kakar, M.R., et al.: Surface free energy and moisture susceptibility evaluation of asphalt binders modified with surfactant-based chemical additive. J. Clean. Prod. 112, 2342–2353 (2016)CrossRef

37.

Sakanlou, F.; Shirmohammadi, H.; Hamedi, G.H.: Investigating the effect of filler types on thermodynamic parameters and their relationship with moisture sensitivity of asphalt mixes. Mater. Struct. 51(2), 39 (2018)CrossRef

38.

Hamedi, G.H.: Investigating the use of nano coating over the aggregate surface on moisture damage of asphalt mixtures. Int. J. Civ. Eng. 16(6), 659–669 (2018)CrossRef

39.

Hamedi, G.H.; et al.: Applying asphalt binder modifier in reducing moisture-induced damage of asphalt mixtures. Eur. J. Environ. Civ. Eng. (2019). https://doi.org/10.1080/19648189.2019.1615554

40.

ASTM D5581-07a: Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen). ASTM International, West Conshohocken (2013)

41.

Hamedi, G.H.; Sahraei, A.; Esmaeeli, M.R.: Investigate the effect of using polymeric anti-stripping additives on moisture damage of hot mix asphalt. Eur. J. Environ. Civ. Eng. 25(1), 90–103 (2021)CrossRef

42.

Behbahani, H., et al.: Improving the moisture performance of hot mix glass asphalt by high-density polyethylene as an asphalt binder modifier. Int. J. Sustain. Build. Technol. Urban Dev. 10, 184–193 (2020)

43.

Hamedi, G.H.; Ranjbar Pirbasti, Z.; Esmaeili, N.: Laboratory investigation of the effect of ABS polymer on moisture susceptibility of asphalt mixtures. Aust. J. Civ. Eng. 17(2), 96–109 (2019)CrossRef

44.

British Standards Institution, Bituminous mixtures—Test methods for hot mix asphalt—Part 24: Resistance to fatigue, BS EN 12697-24, London (2004)

45.

Azarion, Y., et al.: Model for predicting moisture susceptibility of asphalt mixtures based on material properties. J. Mater. Civ. Eng. 31(10), 04019239 (2019)CrossRef

46.

Huang, B.; Mohammad, L.N.; Chris Abadie, P.: Fundamentals of penneability in aspbalt mixtures. In: The Annual Meeting of the Association of Asphalt Paving Technologist (1999)

47.

Good, R.J.; van Oss, C.J.: The modern theory of contact angles and the hydrogen bond components of surface energies. In: Schrader, M.E.; Loeb, G.I. (Eds.) Modern Approaches to Wettability, pp. 1–27. Springer, Boston (1992)

48.

Goldstein, J.: Practical Scanning Electron Microscopy: Electron and Ion Microprobe Analysis. Springer, Berlin (2012)

49.

Kim, H.H., et al.: Identification of the microstructural components of crumb rubber modified asphalt binder (CRMA) and the feasibility of using environmental scanning electron microscopy (ESEM) coupled with energy-dispersive X-Ray spectroscopy (EDX). Int. J. Highw. Eng. 18(6), 41–50 (2016)CrossRef

50.

Koza, J.R.; Koza, J.R.: Genetic Programming: On the Programming of Computers by Means of Natural Selection, Vol. 1. MIT Press, Cambridge (1992)MATH

51.

Devarriya, D., et al.: Unbalanced breast cancer data classification using novel fitness functions in genetic programming. Expert Syst. Appl. 140, 112866 (2020)CrossRef

52.

D’Angelo, G.; Palmieri, F.: Knowledge elicitation based on genetic programming for non destructive testing of critical aerospace systems. Future Gener. Comput. Syst. 102, 633–642 (2020)CrossRef

53.

Ivakhnenko, A.G.: The group method of data of handling; a rival of the method of stochastic approximation. Sov. Autom. Control 13, 43–55 (1968)

54.

Farlow, S.J.: The GMDH algorithm of Ivakhnenko. Am. Stat. 35(4), 210–215 (1981)

55.

Anastasakis, L.; Mort, N.: The development of self-organization techniques in modelling: a review of the group method of data handling (GMDH). Research Report-University of Sheffield Department of Automatic Control and Systems Engineering (2001)

56.

Ziari, H., et al.: Prediction of IRI in short and long terms for flexible pavements: ANN and GMDH methods. Int. J. Pavement Eng. 17(9), 776–788 (2016)CrossRef

57.

Bargegol, I., et al.: Delay modeling of un-signalized roundabouts using neural network and regression. Comput. Res. Prog. Appl. Sci. Eng. 2, 28–34 (2016)

58.

Gilani, V.N.M.; et al.: Investigation of the impact of deicer materials on thermodynamic parameters and its relationship with moisture susceptibility in modified asphalt mixtures by carbon nanotube. Arab. J. Sci. Eng. (2020). https://doi.org/10.1007/s13369-020-05000-9

59.

Kamboozia, N.; Ameri, M.; Hosseinian, S.M.: Statistical analysis and accident prediction models leading to pedestrian injuries and deaths on rural roads in Iran. Int. J. Inj. Control Saf. Promot. 27(4), 493–509 (2020)CrossRef

60.

Shojaeefard, M.H.; Hosseini, S.E.; Zare, J.: CFD simulation and Pareto-based multi-objective shape optimization of the centrifugal pump inducer applying GMDH neural network, modified NSGA-II, and TOPSIS. Struct. Multidiscip. Optim. 60(4), 1509–1525 (2019)CrossRef

Title: Presentation of a New Deicer with the Least Moisture and Fatigue Failures in Asphalt Mixtures
Authors: Vahid Najafi Moghaddam Gilani
Seyed Mohsen Hosseinian
Mohammad Nikookar
Publication date: 06-02-2021
Publisher: Springer Berlin Heidelberg
Published in: Arabian Journal for Science and Engineering / Issue 11/2021
Print ISSN: 2193-567X
Electronic ISSN: 2191-4281
DOI: https://doi.org/10.1007/s13369-021-05389-x

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 11/2021

Basement-Storey Effect on the Seismic Response of RC Buildings on Soft Surface Soil

An Improved Form of SPH Method and Its Numerical Simulation Study on the Rock Crack Propagation Containing Fissures and Holes

Numerical Investigation of Ground Settlements Induced by the Construction of Nanjing WeiSanLu Tunnel and Parametric Analysis

Evaluation of Natural Building Stones’ Characterizations Using Ultrasonic Testing Technique

Numerical Simulation of Seepage Failure of Sandy Soil Between Piles Induced by an Underground Leaking Pipe

Transportation Performance of Large-Sized Pebbles in Slurry Circulation System: A Laboratory Study

Premium Partners