Top

Published in:

2020 | OriginalPaper | Chapter

1. Process Modeling for Dynamic Disperse Particle Separation and Deposition Processes

Authors : Sören Sander, Lizoel Buss, Udo Fritsching

Published in: Dynamic Flowsheet Simulation of Solids Processes

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Dynamic particulate process models are to be derived within the framework of dynamic flowsheet modeling and simulation (FSS). In the contribution FSS is developed for the separation processes of solid particles from a fluid resp. gas. Potential applications of the dynamic simulation environment of particle separation are for instance in the analysis and design of the dynamic process behavior in the purification of exhaust gases (for example to reduce emissions from combustion processes) but also in the production of particle layers with defined properties, as occur in the powder coating of surfaces.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

next chapter Dynamic Modelling of Reactive Fluidized Bed Systems Using the Example of the Chemical Looping Combustion Process for Solid Fuels

Jedrusik, M., Swierczok, A., Teisseyre, R.: Experimental study of fly ash precipitation in a model electrostatic precipitator with discharge electrodes of different design. Powder Technol. 135, 295–301 (2003)CrossRef

Dastoori, K., Makin, B., Kolhe, M., Des-Roseaux, M., Conneely, M.: CFD modelling of flue gas particulates in a biomass fired stove with electrostatic precipitation. J. Electrostat. 71, 351–356 (2013)CrossRef

Prabhu, V., Kim, T., Khakpour, Y., Serre, S.D., Clack, H.L.: Evidence of powdered activated carbon preferential collection and enrichment on electrostatic precipitator discharge electrodes during sorbent injection for mercury emissions control. Fuel Process. Technol. 93, 8–12 (2012)CrossRef

Lübbert, C.: Zur Charakterisierung des gequenchten Zustandes im Elektroabscheider (On the characterization of the quenched regime in electrostatic precipitators). Brandenburgische Technische Universität Cottbus, Fakultät für Umweltwissenschaften und Verfahrenstechnik (2011)

Kaul, M., Schmidt, E.: Reduction of fine dust-emissions at inner city areas—opportunities and limitations of electrostatic precipitators. Presented at the international conference and exhibition for filtration and separation technology. Cologne, Germany (2015)

Xiao, G., Wang, X., Yang, G., Ni, M., Gao, X., Cen, K.: An experimental investigation of electrostatic precipitation in a wire–cylinder configuration at high temperatures. Powder Technol. 269, 166–177 (2015)CrossRef

Wen, T.-Y., Wang, H.-C., Krichtafovitch, I., Mamishev, A.V.: Novel electrodes of an electrostatic precipitator for air filtration. J. Electrostat. 73, 117–124 (2015)CrossRef

Deutsch, W.: Bewegung und Ladung der Elektrizitätsträger im Zylinderkondensator. Ann. Phys. 373, 335–344 (1922)CrossRef

Podliński, J., Niewulis, A., Mizeraczyk, J.: Electrohydrodynamic flow and particle collection efficiency of a spike-plate type electrostatic precipitator. J. Electrostat. 67, 99–104 (2009)CrossRef

10.

Schmid, H.-J.: On the modelling of the particle dynamics in electro-hydrodynamic flow fields: II. Influences of inhomogeneities on electrostatic precipitation. Powder Technol. 135–136, 136–149 (2003)CrossRef

11.

Arif, S., Branken, D.J., Everson, R.C., Neomagus, H.W.J.P., le Grange, L.A., Arif, A.: CFD modeling of particle charging and collection in electrostatic precipitators. J. Electrostat. 84, 10–22 (2016)CrossRef

12.

Farnoosh, N., Adamiak, K., Castle, G.S.P.: 3-D numerical analysis of EHD turbulent flow and mono-disperse charged particle transport and collection in a wire-plate ESP. J. Electrostat. 68, 513–522 (2010)CrossRef

13.

Kaiser, S.: CFD Modellierung und simulation von elektrostatischen Abscheidern nasser Bauart, Ph.D. Technische Universität Dortmund, Germany (2013)

14.

Roghair, I., van den Ende, H.T.M., Mugele, F.: An OpenFOAM-based electro-hydrodynamic model. In: Presented at the 8th International Conference on Multiphase Flow Jeju. Korea (2013)

15.

OpenFOAM. (14.04.2016). OpenFOAM project web pages. http://www.openfoam.org

16.

Javadi, A., Nilsson, H.: Time-accurate numerical simulations of swirling flow with rotor-stator interaction. Flow Turbul. Combust. 95, 755–774 (2015)CrossRef

17.

Javadi, A.: Time-accurate Turbulence Modeling of Swirling Flow for Hydropower Application, Ph.D. Department of Applied Mechanics, Chalmers university of technology, Gothenburg, Sweden (2014)

18.

Aleksin, Y., Vora, A., Riebel, U.: A new understanding of electric conduction in highly resistive dusts and bulk powders. Powder Technol. 294, 353–364 (2016)CrossRef

19.

Pieloth, D., Wiggers, H., Walzel, P.: Influence of thermodynamic, material, and bulk properties on electrical resistivity of particle layers. Chem. Eng. Technol. 37, 627–634 (2014)CrossRef

20.

Lübbert, C.: Zur Charakterisierung des gequenchten Zustandes im Elektroabscheider. Ph.D. Thesis, Fakultät für Umweltwissenschaften und Verfahrenstechnik, BTU Cottbus (2012)

21.

Flagan, R.C., Seinfeld, J.H.: Fundamentals of Air Pollution Engineering. Prentice-Hall, Inc., Englewood Cliffs (1988)

22.

McDonald, J.R., Smith, W.B., Spencer III, H.W., Sparks, L.E.: A mathematical model for calculating electrical conditions in wire-duct electrostatic precipitation devices. J. Appl. Phys. 48, 2231–2243 (1977)CrossRef

23.

Cooperman, G.: A new current-voltage relation for duct precipitators valid for low and high current densities. IEEE Trans. Ind. Appl. IA-17, 236–239 (1981)

24.

Kaiser, S., Fahlenkamp, H.: CFD modelling of the electrical phenomena and the particle precipitation process of wet ESP in coaxial wire-tube configuration. Int. J. Plasma Environ. Sci. Technol. 5, 103–109 (2011)

25.

Lawless, P.A.: Particle charging bounds, symmetry relations, and an analytic charging rate model for the continuum regime. J. Aerosol Sci. 27, 146–160 (1996)CrossRef

26.

Niewulis, A., Podliński, J., Mizeraczyk, J.: Electrohydrodynamic flow patterns in a narrow electrostatic precipitator with longitudinal or transverse wire electrode. J. Electrostat. 67, 123–127 (2009)CrossRef

27.

Podliński, J., Dekowski, J., Mizeraczyk, J., Brocilo, D., Chang, J.-S.: Electrohydrodynamic gas flow in a positive polarity wire-plate electrostatic precipitator and the related dust particle collection efficiency. J. Electrostat. 64, 259–262 (2006)CrossRef

28.

Sander, S., Fritsching, U.: “Analyse der Bewegung von Partikelkollektiven im Elektroabscheider mittels PIV (ProcessNet annual meeting), pp. 1588–1589. Aachen, Germany (2014)

29.

Al-Hamouz, Z.: Numerical and experimental evaluation of fly ash collection efficiency in electrostatic precipitators. Energy Convers. Manag. 79, 487–497 (2014)CrossRef

30.

Liu, Q., Zhang, S.-S., Chen, J.-P.: Numerical analysis of charged particle collection in wire-plate ESP. J. Electrostat. 74, 56–65 (2015)CrossRef

31.

McLean, K.J.: Electrostatic precipitation. IEEE Rev. 135, 347–361 (1987)

32.

Adamiak, K., Atten, P.: Simulation of corona discharge in point–plane configuration. J. Electrostat. 61, 85–98 (2004)CrossRef

33.

Skorych, V., Dosta, M., Hartge, E.-U., Heinrich, S.: Novel system for dynamic flowsheet simulation of solids processes. Powder Technol. 314, 665–679 (2017)CrossRef

34.

Sander, S., Gawor, S., Fritsching, U.: Separating polydisperse particles using electrostatic precipitators with wire and spiked-wire discharge electrode design. Particuology (2017)

35.

Cooperman, P.: A theory for space-charge-limited currents with application to electrical precipitation. Trans. Am. Inst. Electr. Eng. Part I Commun. Electron. 79, 47–50 (1960)

36.

Yamamoto, T., Mieno, M., Shibata, K., Sakai, K.: Studies of rapping reentrainment from electrostatic precipitators. In: Proceedings of 7th International Conference on Electrostatic Precipitation, pp. 163–170 (1998)

37.

Londershausen, T.T.: Entwicklung von Prognosefunktionen zur Abschätzung der Staubungsneigung von trockenen und feuchten Schüttgütern. Dr.-Ing., Faculty of Mechanical Engineering and safety technology, Bergische Universität Wuppertal, Shaker Verlag, Aachen (2018)

38.

Shnapp, R., Liberzon, A.: A comparative study and a mechanistic picture of resuspension of large particles from rough and smooth surfaces in vortex-like fluid flows. Chem. Eng. Sci. 131, 129–137 (2015)CrossRef

39.

Henry, C., Minier, J.-P.: A stochastic approach for the simulation of particle resuspension from rough substrates: Model and numerical implementation. J. Aerosol Sci. 77, 168–192 (2014)CrossRef

40.

Schlichting, H.: Boundary-Layer Theory, 8th edn. Springer Verlag, Heidelberg (2000)CrossRef

41.

Tsai, R., Mills, A.: A model of particle re-entrainment in electrostatic precipitators. J. Aerosol Sci. 26, 227–239 (1995)CrossRef

42.

Yang, S., Dong, K., Zou, R., Yu, A., Guo, J.: Packing of fine particles in an electrical field. Granular Matter 15 (2013)

43.

Ouchiyama, N., Tanaka, T.: Porosity estimation for random packings of spherical particles. Ind. Eng. Chem. Fundam. 23, 490–493 (1984)CrossRef

44.

Londershausen, T., Schmidt, E., Sander, S., Fritsching, U.: Characterization of powder layer dustiness—influence of the deposit thickness. Chem. Eng. Technol. 40, 1720–1725 (2017)

Title: Process Modeling for Dynamic Disperse Particle Separation and Deposition Processes
Authors: Sören Sander
Lizoel Buss
Udo Fritsching
Publisher: Springer International Publishing
Book: Dynamic Flowsheet Simulation of Solids Processes
Print ISBN: 978-3-030-45167-7

Electronic ISBN: 978-3-030-45168-4

Copyright Year: 2020
DOI: https://doi.org/10.1007/978-3-030-45168-4_1