Top

Published in:

2024 | OriginalPaper | Chapter

Processability of Mg-Gd Powder via Friction Extrusion

Authors : Lars Rath, Chang Chan, Uceu Suhuddin, Hendrik Buresch, Thomas Ebel, Benjamin Klusemann

Published in: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity

Publisher: Springer Nature Switzerland

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Friction extrusion (FE) is a solid-state processing technique based on heat and shear introduction via friction at the die-feedstock interface. FE can be used to process feedstock of different forms, such as solid billets, chips or powder as well as being applicable to a variety of Al-, Mg- and Cu-alloys. The relative rotation between die and feedstock makes preheating obsolete and the induced plastic deformation has the potential of not only energy-efficient consolidation but also grain refinement for improved extrudate properties.

In this study, the processability of Mg-Gd powder via FE is investigated. Mg-Gd alloys have their main use in aerospace as well as being promising candidates for biomedical applications. In these fields the homogeneity in terms of mechanical and chemical properties, respectively, is a critical factor.

Consequently, the application of FE in this study aims to provide insight on a new possible processing route for Mg-Gd alloys by investigating the mechanical properties of the extruded, fully consolidated wires, i.e. hardness and compressive properties, as well as the microstructural features of the feedstock during processing, i.e. void volume, grain structure and morphology changes.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Exploring a Novel Process for Reducing Aluminum Extrusion Process Scrap

next chapter Assessment of Recently Developed Low-Force Extrusion Methods for Manufacturing Aluminium Vehicular Hydrogen Tank Liners

Thomas, W.M., Nicholas, E.D., Jones, S.B.: U.S. Patent 5,262,123 (1993)

Halak, R.M., Rath, L., Suhuddin, U.F.H.R., dos Santos, J.F., Klusemann, B.: Changes in processing characteristics and microstructural evolution during friction extrusion of aluminum. Int. J. Mater. Form. 15(24) (2022). https://doi.org/10.1007/s12289-022-01670-y

Milner, J.L., Abu-Farha, F.: On the manufacture of lightweight alloy tubes via friction stir back extrusion: process evaluation and material performance. In: Proceedings of the ASME 2014 International Manufacturing Science and Engineering Conference collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference, vol. 2, Processing, V002T02A085. ASME, Detroit, Michigan, USA (2014)

Whalen, S., Overman, N., Joshi, V., Varga, T., Graff, D., Lavender, C.: Magnesium alloy ZK60 tubing made by shear assisted processing and extrusion (ShAPE). Mater. Sci. Eng. A 755, 278–288 (2019)CrossRef

Saad, M.H., Jarrah, O.M., Nazzal, M.A., Darras, B.M., Kishawy, H.A.: Sustainability-based evaluation of friction stir back extrusion of seamless tubular shapes. J. Clean. Prod. 267, 121972 (2020)CrossRef

Abdi Behnagh, R., Shen, N., Ansari, M.A., Narvan, M., Besharati Givi, M.K., Ding, H.: Experimental analysis and microstructure modeling of friction stir extrusion of magnesium chips. J. Manuf. Sci. Eng. 138(4), 041008 (2015)CrossRef

Baffari, D., Buffa, G., Campanella, D., Fratini, L., Reynolds, A.P.: Process mechanics in friction stir extrusion of magnesium alloys chips through experiments and numerical simulation. J. Manuf. Process. 29, 41–49 (2017)CrossRef

Overman, N.R., et al.: Homogenization and texture development in rapidly solidified AZ91E consolidated by shear assisted processing and extrusion (ShAPE). Mater. Sci. Eng. A 701, 56–68 (2017)CrossRef

Sharifzadeh, M., Ansari, M.A., Narvan, M., Abdi Behnagh, R., Araee, A., Besharati Givi, M.K.: Evaluation of wear and corrosion resistance of pure Mg wire produced by friction stir extrusion. Trans. Nonferrous Met. Soc. China 25, 1847–1855 (2015)CrossRef

10.

Lakshminarayanan, A., Jayakumar, K.S.: Use of friction extrusion to fabricate magnesium alloy wires with rare earths from machined chips. Mater. Sci. Forum 979, 119–123 (2020)CrossRef

11.

Buffa, G., Campanella, D., Fratini, L., Micari, F.: AZ31 magnesium alloy recycling through friction stir extrusion process. Int. J. Mater. Form. 9(5), 613–618 (2015). https://doi.org/10.1007/s12289-015-1247-6CrossRef

12.

Ansari, M.A., Behnagh, R.A., Narvan, M., Naeini, E.S., Givi, M.K.B., Ding, H.: Optimization of friction stir extrusion (FSE) parameters through taguchi technique. Trans. Indian Inst. Met. 69(7), 1351–1357 (2015). https://doi.org/10.1007/s12666-015-0686-6CrossRef

13.

Zhao, X., et al.: A novel approach for producing Mg-3Al-1Zn-0.2Mn alloy wire with a promising combination of strength and ductility using CoreFlowTM. Scr. Mater. 227, 115301 (2023)CrossRef

14.

Olszówka-Myalska, A., Wrzésniowski, P., Ostachowski, P., Godzierz, M., Kuc, D.: Effect of magnesium powder application on the microstructure and properties of rods extruded by the forward-backward rotating die extrusion method. Materials 15(12), 4094 (2022)CrossRef

15.

Whalen, S., et al.: High ductility aluminum alloy made from powder by friction extrusion. Materialia 6, 100260 (2019)CrossRef

16.

Harmuth, J., Wiese, B., Bohlen, J., Ebel, T., Willumeit-Römer, R.: Wide range mechanical customization of Mg-Gd alloys with low degradation rates by extrusion. Front. Mater. 6, 201 (2019)CrossRef

17.

Al-Buainain, M., Shunmugasamy, V.C., Usman, C.A., Mansoor, B.: Influence of microstructure on the mechanical and corrosion response of a friction stir-extruded WE43 magnesium rod. Metals 13(2), 191 (2023)CrossRef

Title: Processability of Mg-Gd Powder via Friction Extrusion
Authors: Lars Rath
Chang Chan
Uceu Suhuddin
Hendrik Buresch
Thomas Ebel
Benjamin Klusemann
Publisher: Springer Nature Switzerland
Book: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity
Print ISBN: 978-3-031-41022-2

Electronic ISBN: 978-3-031-41023-9

Copyright Year: 2024
DOI: https://doi.org/10.1007/978-3-031-41023-9_44