Top

Published in:

2023 | OriginalPaper | Chapter

Processing Map and Performance of a Low-Cost Wrought Magnesium Alloy: ZAXEM11100

Authors : Thomas Avey, Jiashi Miao, Joshua Caris, Anil K. Sachdev, Alan Luo

Published in: Magnesium Technology 2023

Publisher: Springer Nature Switzerland

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Lightweight components improve the fuel efficiency of internal combustion vehicles and contribute to extending the driving range of electrified vehicles. Many Mg alloys have been developed over the years to meet these demands; however, low formability at room temperature, corrosion, and high cost have inhibited widespread adoption in the automotive industry. The new alloy Mg-1Zn-1Al-0.5Ca-0.2Ce-0.4Mn (ZAXEM 11100, all in weight %) has shown excellent post-rolling formability with an Ericksen Index of 7.8 mm and a post-T6 yield stress of 270 MPa in lab scale sheet samples. In this work, a processing map based on Gleeble thermomechanical tests has been developed for the new alloy. This processing map provided important guidance to a production scale extrusion. This work details the mechanical performance of ZAXEM11100 as an extrusion alloy.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Development of Mg-Based Superelastic Alloy Through Aging Heat Treatment

next chapter Effect of Extrusion and Heat Treatment on Microstructure and Mechanical Properties of Mg-1.27Zn-0.75Gd-0.17Zr Alloy

Joost WJ, Krajewski PE. Towards magnesium alloys for high-volume automotive applications. Scr Mater 2017;128:107–12. https://doi.org/10.1016/J.SCRIPTAMAT.2016.07.035.

Taub A, De Moor E, Luo A, Matlock DK, Speer JG, Vaidya U. Materials for Automotive Lightweighting. Annu Rev Mater Res 2019;49:327–59. https://doi.org/10.1146/annurev-matsci-070218-010134.

Muratori M, Alexander M, Arent D, Bazilian M, Cazzola P, Dede EM, et al. The rise of electric vehicles—2020 status and future expectations. Prog Energy 2021;3:022002. https://doi.org/10.1088/2516-1083/ABE0AD.

Luo AA, Shi R, Miao J, Avey T. Review: Magnesium Sheet Alloy Development for Room Temperature Forming. JOM 2021;73:1403–18. https://doi.org/10.1007/s11837-021-04616-y.

Shi R, Miao J, Avey T, Luo AA. A new magnesium sheet alloy with high tensile properties and room-temperature formability. Sci Rep 2020;10:1–10. https://doi.org/10.1038/s41598-020-67161-9.

Pekguleryuz MO. Current developments in wrought magnesium alloys. Woodhead Publishing Limited; 2012. https://doi.org/10.1533/9780857093844.1.3.

Luo AA. Applications: Aerospace, automotive and other structural applications of magnesium. Fundam. Magnes. Alloy Metall. A Vol. Woodhead Publ. Ser. Met. Surf. Eng., Elsevier Inc.; 2013, p. 266–316. https://doi.org/10.1533/9780857097293.266.

Bettles CJ, Gibson MA. Current wrought magnesium alloys: Strengths and weaknesses. JOM 2005 575 2005;57:46–9. https://doi.org/10.1007/S11837-005-0095-0.

Liu C, Chen X, Chen J, Atrens A, Pan F. The effects of Ca and Mn on the microstructure, texture and mechanical properties of Mg-4 Zn alloy. J Magnes Alloy 2021;9:1084–97. https://doi.org/10.1016/J.JMA.2020.03.012.

10.

Meng X, Wu R, Zhang M, Wu L, Cui C. Microstructures and properties of superlight Mg–Li–Al–Zn wrought alloys. J Alloys Compd 2009;486:722–5. https://doi.org/10.1016/J.JALLCOM.2009.07.047.

11.

Liu P, Jiang H, Cai Z, Kang Q, Zhang Y. The effect of Y, Ce and Gd on texture, recrystallization and mechanical property of Mg–Zn alloys. J Magnes Alloy 2016;4:188–96. https://doi.org/10.1016/J.JMA.2016.07.001.

12.

Mishra RK, Gupta AK, Rao PR, Sachdev AK, Kumar AM, Luo AA. Influence of cerium on the texture and ductility of magnesium extrusions. Scr Mater 2008;59:562–5. https://doi.org/10.1016/J.SCRIPTAMAT.2008.05.019.

13.

He YY, Fang G. Characterization of dynamic precipitation behaviors accompanying dynamic recrystallization in an Mg-Al-Zn-RE alloy. J Alloys Compd 2022;901:163745. https://doi.org/10.1016/j.jallcom.2022.163745.

14.

Myshlyaev MM, Mcqueen HJ, Mwembela A, Konopleva E. Twinning, dynamic recovery and recrystallization in hot worked MgÁ/ AlÁ/ Zn alloy. Mater Sci Eng A 2002;337:121–33.

15.

Ashby MF. A first report on deformation-mechanism maps. Acta Metall 1972;20:887–97. https://doi.org/10.1016/0001-6160(72)90082-X.

16.

Fatemi SM, Aliyari S, Miresmaeili SM. Dynamic precipitation and dynamic recrystallization during hot deformation of a solutionized WE43 magnesium alloy. Mater Sci Eng A 2019;762:138076. https://doi.org/10.1016/J.MSEA.2019.138076.

17.

Mohamed FA, Langdon TG. Deformation mechanism maps based on grain size. Metall Mater Trans B 1974 511 1974;5:2339–45. https://doi.org/10.1007/BF02644014.

18.

Sutton SC, Luo AA. Constitutive behavior and processing maps of a new wrought magnesium alloy ZE20 (Mg-2Zn-0.2Ce). J Magnes Alloy 2020;8:111–26. https://doi.org/10.1016/j.jma.2019.11.007.

19.

Kumar AKSK. Criteria for Predicting Metallurgical Instabilities in Processing. Master’s Thesis. India Institute of Science, Bangalore, India, 1987.

20.

Prasad YVRK, Gegel HL, Doraivelu SM, Malas JC, Morgan JT, Lark KA, et al. Modeling of Dynamic Material Behavior in Hot Deformation: Forging of Ti-6242. n.d.

21.

Prasad YVRK. Recent Advances in the Science of Mechanical processing. Indian J Technol 1990;28:435–51.

22.

Prasad Y, Rao K, Sasidhar S. Hot working guide: a compendium of processing maps. ASM international; 2015.

23.

Murty SVSN, Sarma MS, Rao BN. On the evaluation of efficiency parameters in processing maps. Metall Mater Trans A Phys Metall Mater Sci 1997;28 A:1581–2. https://doi.org/10.1007/s11661-997-0219-y.

24.

Narayana Murty SVS, Nageswara Rao B, Kashyap BP. Instability criteria for hot deformation of materials. Int Mater Rev 2000;45:15–26. https://doi.org/10.1179/095066000771048782.

25.

Zeigler H. Progress in solid mechanics. New York: Wiley; 1963.

26.

Huang K, Logé RE. A review of dynamic recrystallization phenomena in metallic materials. Mater Des 2016;111:548–74. https://doi.org/10.1016/j.matdes.2016.09.012.

Title: Processing Map and Performance of a Low-Cost Wrought Magnesium Alloy: ZAXEM11100
Authors: Thomas Avey
Jiashi Miao
Joshua Caris
Anil K. Sachdev
Alan Luo
Publisher: Springer Nature Switzerland
Book: Magnesium Technology 2023
Print ISBN: 978-3-031-22644-1

Electronic ISBN: 978-3-031-22645-8

Copyright Year: 2023
DOI: https://doi.org/10.1007/978-3-031-22645-8_35

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners